Can I improve performance by changing my HDD to new SSD HDD standard? Will be WHAT SATA-3 works on my device?

Similar Questions

• How can I improve performance Adobe CS5?

  I got a trial of Adobe Creative Suite 5 on a PC at work and so far it's ok, but it's really trolling. The PC currently has an Intel Core 2 Quad Q9400 2.66 GHz, 4 GB of Ram DDR2, 160 GB HDD, and an integrated Intel graphics chip.

  Add a dedicated graphics card will improve performance of CS5? I read on the forums that Mac users use a 2nd hard drive as a "scratch disk" for the likes of photoshop which improves performance but do not know how to implement that.

  Any ideas would be great.

  The integrated graphics may well take all system RAM. In addition, you enter your operating system but I recommend Win 7 64 bit with a boat load of RAM.

  Fast hard drives with a drive of dedicated work will help, too.

  Bob

• Can I use the recovery discs HP on a new SSD for HP Envy Windows 8?

  Hello

  I've owned my TouchSmart from HP ENVY 15 - j105sa Notebook PC, Ref. F5D08EA for a few months now and I would like to upgrade to an SSD Samsung Evo 840 (500 GB) HARD drive.
  
  I use the recovery disks that I created when I got the laptop to install the OS on the new SSD? I know that I could do it with previous versions of Windows, but with secureboot etc I do not know if this can be done with Windows 8, I know, it can be disabled in the BIOS, but I have the latest bios update for my laptop that I check regularly.

  Thanks for any help.

  The method the most painless way to do is to buy the new SSD as a migration kit.

  Migration kits are delivered with a USB to SATA data\power connector and cloning software.

  Recovery and recovery usb media discs games requires that the target disk is the same size or larger than the original. In using the method of migration (cloning) will show that a problem.

  It makes you, thank you.

• HP Touchsmart, model 520-1070: can I replace a defective hard drive with a new SSD in a HP Touchsmart, model 520-1070

  The HD in my Touchsmart 520-1070 broke down.  I wonder if I can replace the defective HD with a SSD in the 520-1070?

  Any recommendations on the type of SSD, where I could acquire an and have the existing data migrated from defective HD would be appreciated.

  Thank you.

  If you purchase the SSD as a migration kit, it will come with instructions.

  There is nothing you need to do in the BIOS.

  It is good to hear that you have had the foresight to save the data to the PC.

• How can I improve the performance of my pc hp pavilion

  When I try to use the pc, it is very very slow. programs like e-mail search on the net, watch video (cannot watch it) are all slow. How can I improve performance?

  Hello

  You could have a look at this link on the improvement of performance. May be useful for you. Talking about the general house keeping deleting the temporary files, defrag and such.

• Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Is possible to create a lot of email account on the same computer can affect the performance of the computer or something else?

  Sheman salvation,

  What do you mean by "creates a lot of e-mail account on the same computer?

  I mean after connect hotmail.com let's say, after uttering the 1st email account, so I create another and one more, etc...  can affect the performance of the computer or something else?

  I know that with 1 or 2 email account is sufficient, but I just want to know by I have

  can affect the performance of the computer or something else?

  stuckfree,
  Who is 'Sheman?

  What about your further explanation - it can affect the performance of the computer?

  Together?  Only if you're so low disk space (almost out - the figure even single or double megabytes (MB) area) that everything is affected.  Otherwise - the only performance can affect the messaging application, you use as it POP3, IMAP, Exchange, etc. connects to different e-mail providers at the same time, you need to get your e-mail.  I have three to five settings of accounts on each of my systems (or accounts Hotmail, Gmail, or accounts, corporate, local accounts or accounts ISP, etc.) in Microsoft Outlook and don't encounter any problem.

• can I use icloud email account to set up new iPad?

  1. can I use existing icloud email account to establish new iPad?

  2. What are the benefits of having this icloud email account?

  Hi winwin666,

  I understand that you want to know if you can configure a new iPad or iPad using your e-mail account existing iCloud.   You ask specifically about the e-mail address that ends with @icloud.com or your Apple ID.   The answer to your question depends on your situation.  If you are the one who will use the additional iPads, you certainly want to use the same identifier Apple to keep all your data (calendars, contacts, backups, etc.) synchronized on your devices.

  If additional iPads will be used by someone else, each user must have their own Apple ID to keep their data, notes, messages, iCloud email accounts, etc. related to a single account.

  Here are a few resources that explain Apple ID and iCloud features a little more in detail for you.

  Apple ID - Frequently asked Questions

  What is an Apple ID?

  An identifier Apple is the personal account allows you to access the services of Apple as the App Store, iTunes Store, iCloud, iMessage, the Apple Store online, FaceTime and more. It includes the e-mail address and the password that allows you to connect, as well as all contacts, payment and the security details that you will use in all of Apple services.

  When can I use my Apple ID?

  Set you up a new device, make a purchase, or using any service of Apple, you will be asked to sign in with your Apple and the password. Once signed in you will have access to the service and all the personal information in your account.

  How Apple ID do I need?

  Just a. Use Apple everywhere the same ID wherever you log to ensure that all your Apple services and devices work together seamlessly, and you can access your content personal to all your devices.

  Can I share an Apple ID with someone else?

  Your identifier Apple should not be shared with another person. It gives access to personal information, including contacts, pictures, backup device, and other. Sharing your Apple ID with someone else means that you are giving them access to all your personal content and can lead to confusion about who actually holds the account. Pour partager share iTunes and App Store purchases, photos, calendar and more with someone else, try family shares, iCloud, photo sharingor other sharing features easy to use.

  On your Apple ID email addresses

  iCloud: what is iCloud?

  iCloud connects you and your amazing way Apple devices. It ensures that you always the latest versions of your information - such as documents, photos, notes, and contacts - regardless of the device you're using. It allows you to easily share photos, calendars, sites and more with family and friends. It even helps you find your device if you lose.

  Get started

  To begin, just implemented iCloud on your iPhone, iPad, iPod touch, or Mac or go on the web to iCloud only on iCloud.com. Then you can use iCloud.com of the web browser of your computer.

  Keep your mail, contacts, calendars, notes, and reminders to update using Mail, Contacts, Calendar, Notes, and reminders about iCloud.com and using applications on your computer Windows, Mac and iOS devices.

  iCloud: overview of messaging

  If your Apple ID does not with @icloud.com, @me.com or @mac.com, you must set an email address @icloud.com before you can use iCloud Mail on iCloud.com.

  iCloud: implement a @icloud.com e-mail address

  If you're not implemented iCloud by using an Apple ID, which doesn't stop with @icloud.com, @me.com or @mac.com, you must assign an email address @icloud.com before using iCloud Mail.

  If you have an e-mail address ending in @mac.com or @me.com, you already have an equivalent address which is the same except that it ends by @icloud.com. If you use e-mail aliases that ends by @mac.com or @me.com, you also have the equivalent of the addresses ending with @icloud.com.

  On an iOS device, go to settings > iCloud, turn on the mail, then follow the instructions on the screen.

  On a Mac, choose Apple menu > System Preferences, click on iCloud, select mail, then follow the instructions on the screen.

  After you have configured your e-mail address @icloud.com, you can use it to connect to iCloud. You can also log in with the Apple ID, you used to create your iCloud account.

  You can send emails to iCloud by one of the following addresses:

  • Your iCloud email address ([email protected])

  • An alias

  Last modified: 25 March 2016

  With the help of your e-mail address @icloud.com

  You can connect to iCloud with Apple ID you use with your iCloud account or your email address @icloud.com.

  I hope this information helps with what you're trying to do.

  See you soon!

• Can I move my current Adobe programs to a new computer?

  Can I move my Adobe currently installed on my new computer programs? If so, what are the steps?

  Thank you!

  You don't move, you must install them correctly by using your original or downloaded installation media installers and serial numbers. Turn off your programs on your old system, also using Help--> Deactivate. When you install, obey the command of the correct version - older versions before to avoid the more recent conflicts. That's all what to do. If you are having specific problems, come back to this forum.

  Mylenium

• How can I improve the performance of my compaq presario V2000, its very slow

  How can I improve the performance of my compaq presario V2000, its very slow!

  According to many things (specifications, you have now installed vs the programs he came originally with programs, etc.)-it may or may not work better that ever he does now.  However, in terms of nothing other than the software and others on the subject - there are some things you can do to optimize performance.

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do some cleaning and dusting off this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your WIndows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Re: How can I improve the performance of Vista on a Satellite L30-10s?

  I have worked in Vista on a Satellite L30 - 10s for a while and get very poor performance. It takes several seconds just to respond to the movement of the scroll bar. I put Control Plan-> system and Maintenance... System Properties-> visuals to "Adjust for best performance", but it gave no noticeable improvement. The RAM is 446 MB - upgraded this would improve performance? If so, what would the good do & spec to buy?

  > It RAM is 446 MB - upgraded this would improve performance?

  Of course, it is not enough to run vista with good performance. 1 GB minimum Ram required to run Vista, better than 2 GB ram

  To the l30 product specifications:

  standard: 256 MB
  maximum scalability: 2 048 MB
  technology: DDR2 RAM (533 MHz)

  You can be upgraded up to 2 GB DDR 2

  Post edited by: Jeka -?

• How can I improve my computer performance ratings?

  Recently I bought Halo 2 for Vista. I loaded into my computer and am really a lot about the installation process. Then I clicked on "Finish." After that, I got an error message that says "Initailization Failed". He said that he might be missing data or the disc is scarched. This was not true. It also says that you can reinstall and it would work. No luck with that. Evenually, I thought it might be my computer performance ratings. !) SIDE NOTE - I have a DELL inspiron 530 withVista '32'. (!  So I checked my notes and my areas I need to improve are: graphics (3.9) and graphics of games (3.3). As you probably know your base score is determined by your lower under-score. My lower under-score is games graphic that is 3.3. I want to get between them and my graphics (3.9) until a 5.0 rating. Can someone help me?

  You need to buy one - it is a piece of hardware (no software which can be downloaded).  Make sure the card is compatible with your computer, your BIOS, your motherboard and your version of Vista (you may need to consult the computer manufacturer to confirm, you get the right card - or get them specifically for your computer).  Also make sure that it's "quite better" solve the problem - and I would like to get a little more because the computer components become obsolete very quickly.  It will be delivered with the software, firrmware and/or drivers that must be installed before the latter won't work - instuctions should come with it or be available on the web site of the manufacturer of the video card or the provider.  Make sure that the card has enough RAM onboard to make a difference if you want to improve these scores as much as you do.  The card will tell you your new score when you buy - you'll just have to get a good and check it out to see if it does the trick.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How ORA_HASH can improve performance?

  I want to know how ORA_HASH can improve performance.

  Thanks in advance

  Not sure I understand what you want.

  ORA_HASH is just a function of Oracle (often used for the sample data by providing a hash value).

  It's nothing to do with the performance as such.

• How views can improve performance

  Hello

  Can someone explain to me how the views can improve the performance

  When DMLoperations perform through VIEW rather than perform DML operations by table.

  Thank you and best regards,

  Ibrahim Sayyed.

  84b09b47-0add-4854-b184-296b3903b009 wrote:

  Hi Ibrahim.

  A view is not much more than a macro which is developed by the SQL engine when running. Generally speaking, views will not improve performance.

  You can take the help of INDEXED VIEWS to improve performance. Then, views have clustered index assigned and, when they do, they will store the temporary results that can speed up queries that result. These views can speed up and simplify the application design.

  What is the INDEXED VIEWS?

• How can I improve Import / Export performance?

  Hello
  
  How can I improve Import / Export performance?
  Also of the good links to learn more about Datapump please?
  
  Thank you
  
  Felipe.

  Dear Felipe,

  Please take a look at this excellent notes by Chris Foot datapump:

  * http://www.dbazine.com/blogs/blog-cf/chrisfoot/blogentry.2006-06-08.1893574515
  * http://www.dbazine.com/blogs/blog-cf/chrisfoot/blogentry.2006-06-02.2786242018
  * http://www.dbazine.com/blogs/blog-cf/chrisfoot/blogentry.2006-05-26.3042156388
  * http://www.dbazine.com/blogs/blog-cf/chrisfoot/blogentry.2006-05-19.6918984141

  Kind regards

  Francisco Munoz Alvarez
  http://www.oraclenz.com

• Improve performance

  {the script to update the data in the tb_log for new added columns
  a. script should update the data for the lot_qy and lot_status columns. This data can come from the tb_s table
  based on the tb_log.trans_id and the user_id
  {b.script should commint all 5 k rows.}
  
  
  {DECLARE
  
  type r1 is record
  (
  v_user_id tb_s.user_id%type
  v_trans_id tb_s.trans_id%type
  v_lot_qy tb_s.lot_qy%type
  v_lot_status tb_s.lot_status%type
  );
  
  Type ty_tab1 is table of index of r1 by PLS_INTEGER;
  
  ltab1 ty_tab1;
  l_rec_cnt number (9): = 0;
  BEGIN
  Select user_id
  trans_id
  lot_qy
  lot_status
  Bulk collect
  in ltab1
  of tb_s;
  I'm in ltab1.first... ltab1. Last
  loop
  
  Update tb_log
  Set lot_qy = ltab1 (i) .v_lot_qy
  lot_status = ltab1 (i) .v_lot_status
  Where user_id = ltab1 (i) .v_user_id
  and trans_id = ltab1 (i) .v_trans_id;
  
  l_rec_cnt: = l_rec_cnt + 1;
  
  If l_rec_cnt = Then 5000
  COMMIT;
  l_rec_cnt: = 0;
  End If;
  
  End loop;
  
  
  Commit;
  
  DBMS_OUTPUT. Put_line (' the lot_qy and lot_status columns are updated successfully :'|| ltab1.) (Count);
  
  EXCEPTION
  WHILE OTHERS THEN
  dbms_output.put_line(SQLCODE||) e ' || SQLERRM);
  END;
  /}
  
  
  {Any1 can help improve the performance records of for1million, now its very slow work, can someone give me best solution}

  Try to change with INSERT WITH sample UPDATE...

  http://psoug.org/reference/array_processing.html

  DECLARE
  CURSOR s_cur IS
  SELECT *.
  OF servers;

  TYPE Fetch_array IS a TABLE OF s_cur % ROWTYPE;
  s_array fetch_array;
  BEGIN
  OPEN s_cur;
  LOOP
  Fetch the s_cur COLLECT LOOSE s_array LIMIT 1000;

  FORALL i IN 1.s_array. COUNTY
  INSERT INTO Server Server2 VALUES s_array (i);

  EXIT WHEN s_cur % NOTFOUND;
  END LOOP;
  CLOSE S_cur;
  COMMIT;
  END;
  /