Can I move a Windows VM on a host using VICv201 to ESX4 ESX3 using vSphere4?

Similar Questions

• Why I can't move or delete files that have been used by Windows Movie Maker?

  Why I can't move or delete files that have been used by Windows Movie Maker? How to make them free again, now that I want to use the new computer.

  When you create a project in Movie Maker-.mswmm file... it
  records the path to the source (photos, videos, music) files...
  If you re-open the file .mswmm to re - edit source files...
  are not accessible if they have been moved or deleted.

  If "no" re - edit project .mswmm files...
  moving or deleting the source files is not a problem.

  If you 'are' the intention of re - edit .mswmm files but need the
  source files also... just make copies and let it
  original where they are.

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• Can I move my Windows on a new hard drive?

  Here's the situation:

  I currently have a pretty old IDE hard drive, and I'm looking to upgrade to a new motherboard that does not all IDE ports. So basically I'd copy my current hard drive (Windows and all) in a more recent SATA one?

  If not, is there something I could do to move all my stuff on a new hard drive, even if I have to buy a new copy of Windows?

  Thanks in advance for any help, I'm pretty lost at this point.

  Look for a hard drive that suits. Note the manufacturer. Go to their website and download the software they provide for copying/cloning the old drive to the new. Use the new disk on your upgraded computer. You may need to do a telephone activation.

  Note that to do this and have an installation that can be enabled with the current number of product, your version of Windows Vista should be a commercial version and not an OEM version. OEM, those who come usually pre-installed on a PC, versions are valid only for the equipment on which they were originally installed.

  However, even if your original version was OEM, there are ways to proceed. Do the hardware upgrades. Install a new copy of details of the operating system of your choice. (This could be the opportunity to move to Windows 7 unless additional fees). Put your old drive in an external enclosure that accepts IDE (PATA) drives. Copy your files from the user on the newly targeted PC. You will need to install all the old applications.

  It's a pain in the underworld, but the performance improvements are generally well worth the effort.

  Good luck.

  Tom Ferguson

• How can I move the window when the upper part of the window of the Organizer is to join on a Mac?

  I saw a similar question on the forum of a user with a PC.  I use two monitors.  I tried to go back to a monitor with a chance now.  I use Mac OS X 10.7.4 - at some point during the use of the Organizer, the top of the window went above the desktop menu bar.  So I lost the part of the window and all the icons use Organizer.  I tried playing with the display settings and did some net searching, but have not been able to solve.  I rebooted, update software, stopped and restarted the elements, but can not get the window in the center of my screen.  Other suggestions

  Are you sure your put your view back to the highest setting (system prefs > poster)? It is not really possible to do under normal circumstances.

  Go in your username > library > Preferences and delete organizing com.adobe.Elements. [version number] .com. You'll normally more than one, with a slightly different spelling. In lion, this library is hidden. To see option click on the menu go to the Finder and it will appear below the small house for your user account.

• How can I move precisely image in the monitor by using the arrow keys?

  I am currently using first 13 items on my desktop Windows 10. When I use the special effects of culture, I am able to precisely position the top, down, left and right limiters by typing in a decimal percentages. It works very well, especially when you try to manually move the limiter in the monitor by holding down the left mouse button and dragging. Enter the percentage allows the adjustment takes place easily.

  However, I was unable to find a similar positioning tool for when I want to move the image in the monitor. The only way I know to move the image currently is holding down the left mouse button and dragging the image. What would be the most direct and intuitive way (for me) to precisely move the image, once you left mouse clicked on the clip to show the white frame with its 8 small white squares, simply hold the CTRL key, and then use the 4 arrows to position the image. However, holding the CTRL key and pressing the keys 4 arrow do not work, or not keeping the Alt key and pressing the key 4 arrow, nor does not hold down Shift Ctrl, shift, or Ctrl Alt Shift For me, it would help greatly to a precise positioning, if I could hold the CTRL key and press the arrow key should be.

  Anyone happen to know how to position an image in the monitor otherwise than by holding down the left mouse button and dragging the image where you want?

  Thank you

  With the clip selected on your calendar, click effects applied on the right side of the interface.

  In the effects Panel, open the path properties. Here you can define the Position and the scale and Rotation of your clip. You can also effects and keyframe animated trajectories.

• How can I move applications to iPhone7 more page host?

  How can I move apps on the iPhone plus 7?  The old method of holding up to jiggle apps app and it enters edit mode does not work.

  With 3D Touch, you cannot press the icon without getting another action. With the new devices with 3D Touch, just gently place your finger on the icon and wait for it to start the jiggling. Then you can drag it to the new location.

• How can I disable the Windows of Parallels key for use with Boot Camp instead (same Mac)?

  I have a Windows 7 key I used with Parallels (on my Mac). I was unable to uninstall Parallels, and now I want to use my key Windows with Boot Camp instead. How can I turn off the key to the prior use (same computer)? Is this possible?

  Unfortunately, I am not able to return to Parallels. (I upgraded my Mac o/s to an incompatible version with the version of Parallels, I had installed).

  Thanks for the suggestion, if!

  I'll try MS service the customer the morning... wish me luck!

  Just proceed to install Windows 7 in Boot Camp and reactivate by telephone by following the instructions.

• How can I clean installed Windows 7 Ultimate 64-bit using a upgrade disc?

  Originally, I had a Windows Vista 64 - bit o/s office.

  I decided to upgrade to Windows 7 Ultimate 64-bit o/s

  The first time I ran this 'upgrade', I made the mistake of selecting the option UPGRADE instead of using the CUSTOM option.

  For some time since I've done the 'upgrade' I got BSOD problems including caused by video and WebCam drivers.

  This is why last week, I took the plunge and decided to reinstall Windows 7 Ultimate 64-bit using my UPGRADE disc (the disc is not FULL version)

  I selected CUSTOM

  I saw, I had two partitions:

  Disk 0 Partition 1: Win_RE

  Disk 0 Partition 2: CDrive (c :))

  I couldn't find an option to delete my partitions and perform a new installation.

  I ran this and finished installing fine but did not format my drive and it change named my windows to windows.old. Things seem to be ok on my PC, now that I've done this, and I don't take BSoD right now.

  However, I was told that I should be able to achieve a COMPLETE clean install delete partitions to force the OS to reformat and recreate the C: partition.

  The menu:

  Discount

  Load the driver (I have no idea what is this option)

  To make changes to partitions, restart Windows from the installation disc

  I could not click on an option to delete/reformat my partitions and thus abandoned the process.

  I then let the disc (forgive my ignorance) and restarted the PC. I dropped in the BIOS and set to boot from the DVD drive.

  This did not do anything to bring up the WINDOWS SETUP option. It would simply start Windows after that, I suspect, he couldn't find the exe file to start.

  Thus, while everything seems to work fine, I'm frustrated that I can't run a clean full install like what I'm doing doesn't work.

  If someone is able to give me advice on how I can get the installation routine to show this option which would be more useful.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Why can't move from Windows Vista Ultimate Edition of Windows 7 Professional?

  I installed Windows Vista Ultimate. I bought a copy of Windows 7 Professional (I didn't need all the extra guff - it was useless in Vista, do not be at all an advantage to 7). So why can I not go?

  Hello

  Ultimate Vista to Windows 7 Professional is NOT an upgrade path.

  Windows 7 Ultimate is your choice only upgrade from Vista Ultimate.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  Supported upgrade scenarios

  Windows Vista (SP1, SP2)	Upgrading to Windows 7
  Company	Professional, company, full
  Enterprise	Enterprise
  Home Basic	Home Basic, Home Premium, Ultimate
  Home Premium	Home Premium, ultimate edition
  Ultimate	Ultimate

  This is how Microsoft has designed their operating system.

  See you soon.

• I have a computer with windows 7 and you bought a new computer with windows installed. How can I move my windows computer image files on windows 10 7?

  I have a computer with windows 7 to run on it. I have 2 files of images on my current computer and bought a new computer with windows installed 10. Can I copy these files to a dvd and transfer them to the new computer with windows 10 installed. If so, how can I do it and ask what I should do?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-files/file-transfers-from-Windows-Vista-Home-Premium-to/0abb5964-bb5c-49ED-9E03-ef5f5b2fdefc

  Hello Kenneth

  See my response to a similar q in the thread above...

  You can use DVD or CD, but an external drive or a USB is so much faster and easier.

  Best regards, Ric.

• How can I keep a window on top while I use other windows

  When I work with a few windows open I want to force one or more to stay at the top, is to always be visible.  Y at - it a command that will do? Thank you

  Hello

  The requested feature is not possible in native mode in Windows, but the third party software could be used to achieve these features. Use your favorite search engine to find software that can perform this task.

  THIRD WARNING:
  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Cannot install Fedora 11 as a guest on VMware WS 6.5.2 with Windows 7 as a host - using 64 - bit hardware

  Hi people,

  Did my research, but was not able to find answers, so here, I'll post my question/problem.

  I have a HP Compaq nx6125 laptop which has an AMD Turion 64 2200 MHz processor, running Windows 7 Ultimate. I installed the VMware Workstation 6.5.2 full trial and try to install Fedora 11 on a virtual machine.

  I understand that the Turion processor is a 64-bit processor, so I downloaded the iso image of Fedora 11 x86_64 DVD.

  First of all, I need to create a VMware virtual machine (Guest OS: Linux) and choose a version for it. If I choose a version that is one of the 64-bit options (for example, "other Linux 2.6.x kernel 64-bit", since there are specific options for RHEL but not for Fedora), I get an error message at the point where I try to boot from the virtual machine and begin the installation, saying "buslogic SCSI is not supported for 64-bit guests in this version...". ». Then the machine virtual everything stops.

  I guess that this laptop have a SCSI bus, but my disks are IDE and I can see (information system) SCSI bus is not used (?).

  On the other hand, if the virtual machine, I create is one of the versions of 32 - bit option, I get what seems to be just a warning, saying that I am under guest (Fedora 11) OS 64-bit on a virtual machine that is configured to run a 32-bit operating system, and suggesting that changing this to ensure that the client 64 - bit OS will work correctly. What would be the risks / disadvantages of force the installation anyway? Or maybe I should upload an image of Fedora 32-bit and run it on a virtual 32-bit machine, even if my hw is 64-bit? I don't find it too appealing...

  I wonder if someone on the forum has worked with this combination (VMware WS 6.5.2) and Fedora 11 running it, preferable on a HP Compaq 6125 under Windows 7 Ultimate? If so, I'd be really grateful comments / pointers.

  I am new to the world of the machine virtual, so bear with me here.

  Thanks in advance for any help you can provide!

  Kind regards

  Santiago

  "Buslogic SCSI is not supported for clients 64-bit in this version... »

  This message says that the 'virtual' storage controller you have chosen to use for your virtual machine for Fedora 11 (VM) is not supported for 64-bit guests.  It is not related to the host hardware.

  To change the controller for your virtual machine, make sure that the virtual machine is switched off voltage, and then open the settings for it and change the BusLogic to free storage controller.

• I can't move the firefox window, or use the reduce/close/maximize buttons. I have no addons

  I'm on windows 8.1, and firefox worked fine yesterday. Today I can't move the window, reduce, enlarge and close without end of tasks, tried refreshing, reinstall. Still nothing. The only addon I ever is adblock and when retired that didn't fix it either.

  In fact it started randomly... I guess that I threatened it enough...

• I can't move, resize, reduce or close the window of the browser despite everything inside the window still works.

  I don't know which details are necessary, then I'll just charge everything I can think of.

  I use an Asus laptop with windows 7. I've never had a problem with firefox in the past (beyond the usual freezing and some obvious problems with pop-up advertising that are through for the course with firefox since adblocker never does what he says... not really.) Let us be honest.) I use my virus protection Avast, and it is also up to date.

  My problem started about an hour ago when firefox is not responding. The video, I had to play kept going, but I couldn't interact with anything. Assuming that the program froze for the billionth time this week, I restarted, it. This always solved freezing issues in the past. Now, however, firefox doing something again.

  I can access the menus and almost everything on the window itself, with the exception of the minimize/maximize/close buttons, I can't move the window at all and I can't manually resize. I also noticed that although videos will play, I can only click on their buttons if there is another small window on top of firefox. Video controls doesn't appear to like it and when I click on them firefox comes naturally to the front and the video responds with the key I used, but the buttons disappeared again and I can't resume playback without the smaller window at the front back to the buttons display again.

  It's like half of firefox is frozen while the other half is still ongoing in some way.

  I have no themes that could be the cause. Literally no. I only use firefox for things that can no longer be opened in the opera, so I did not need any theme default beyond. Addons only I installed on purpose were adblockers (God knows why. they don't DO nothing.) Although several other things randomly appear to have been installed over time with the help of one thing or another. Various plugins and players and versions of java, that sort of thing. But I have everything (and I mean EVERYTHING) in the menu of the disabled addon.
  I tried to boot in SafeMode (the program, no windows) and the problem is still there except that now it will appear not the menu bar at all unless I press the first ALT and even in this case, it won't let me actually click on anything in the menu bar. When I try the entire bar disappears. I had to close firefox with the Task Manager.
  Restart will fix the problem for about 15 seconds before it comes back.
  Any attempt to update do not have as it says I am already up to date on everything so I don't know what his issue is.

  It is not an urgent issue now because most of what I need to happen on the screen window that I use, but some of my sites have buttons that literally disappear into something else than to full screen and I guess it will be a much larger gene in the coming days.

  Well, nothing is damaged so far. It seems to be itself has for the moment.
  I think that might have done the trick. Thanks for all the help!