Can I print the document formatting control information

Is it possible to print, for example, all the paragraph with their details from development format in the form? I wish the same thing for characters, conditional text etc. formats. ?

I am a long time use of FrameMaker and built many models over the years. The only thing that I've always found missing was the ability to print a list of the different formats so that you can revisit (much more easily at a time on the screen) to make sure they have all the correct settings. MS Word, at the time of the BACK, had this ability, and it was a quick and efficient way of double checking all the formatting.

Does this feature exist in FrameMaker? Or are there utilities out there who would do that?

Thank you

Inge

Another set of utilities that list the entries in the catalogue and their respective values are Silicon Prairie software (Silicon Prairie - produced FrameMaker)-see the paragraph and character tools (note: they list more than just the values!). The price is $10 per tool for most of them.

Tags: Adobe FrameMaker

Similar Questions

  • Whenever I try to print a .pdf file, I get a message that Visual C ++ has requested to terminate in an unusual way and stops so I can not print the document.

    How can I get rid of this problem so I can print pdf documents?

    Try to repair the installation.

  • 6500 wireless Printer-e709n impression extremely light; can not read the documents.

    Impression of lightness; can not read the documents.

    Hello

    You might want to try some of the troubleshooting steps in this document to print quality for your 6500.

    Print quality troubleshooting

    I would follow the document in the order as it is written to solve the most commone first resolutions

  • HP color laserjet 2605 Error error restart when you print the document

    HP color laserjet 2605 error restart when you print the document, please give me a solution?

    Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

    I hope that the discussion can be useful for each of them, thank you

  • Cannot print the document Microsoft Paint the same size as the original

    Original title: Windows 7 paint

    I can't scan a document in the painting and see the entire page on the screen and especially can not print the same size as the original document.  I'm scanning a single 8 1/2 "by 11" paper in paint and were not able to select the appropriate settings in the properties of the image, or setting of the page to print this document from the size of the original... Help, please... Thank you

    Hi Bob,

    Thanks for posting your query in Microsoft Community and we can help you with your problem.

    You can check the print settings in Microsoft Paint and check if it works.

    a. open Microsoft Paint

    b. click on the drop-down menu in the top-left corner

    c. click print and click on Preferences

    d. on the Page tab, make sure that the settings are correct for the Page size and Orientation

    You can also check out the following articles for more information about the painting:

     

    Resize a picture using paint

    http://Windows.Microsoft.com/en-us/Windows7/resize-a-picture-using-paint

     

    With the help of paint

    http://Windows.Microsoft.com/en-us/Windows7/using-paint

    Hope this information helps. Please come back for any clarification on this or any issue of Windows. We will be happy to help you

  • I can't find the document under file settings in CS5. Help!

    I've looked everywhere... even in the menus and keyboard shortcuts, and it is not hidden. It is not found.  Help!

    Hello, JanessaTaylor.

    Photoshop is an image editing software, it does not support multi-page documents, as a Desktop Publishing (DTP) program made.

    You need to configure a given document, create benchmarks (edit > show rules, and then drag guides from the rulers.), then duplicate this document for each page. When you are finished, open all documents when you have finished and use file > automation > presentation PDF to merge into a single document (or use the presentation deck PDF options to select the documents you want). But they would be mostly a collection of images: for example the white background is an image, the result may be heavy.

    Some manually change the "new formats doc' document to create new models with guides, but it is at your own risk, and is not something I would recommend for beginners: http://objectmix.com/adobe-photoshop/313717-changing-photoshop-default-image-size.html (and as far as I know, the guides are only set up in percentage)

    Given the fact that it is not a program of PAO, bleedlines are only put in place when you print the document, you cannot save them in. (unless you are printing PDFS, maybe?)

    I guess that you would be better to edit images in Photoshop and create the document in InDesign.

    Please, tell us what you're trying to do, so that we can better help you!

  • When you try to print the document his service hence giving error does not

    I am using windows xp pro sp2

    When you try to print the document his service hence giving error does not

    then I start the services.msc print spooler service, but this only works for printing after that it gave the same error

    Please help me

    Hi kalpesh_vaghela,

    1. Did you the latest changes on the computer?
    2. What is the full error message that you receive?
    3. What is the number and model of the printer?
    4. You use any program to print the document?
    5. Are you experiencing a similar problem with any program that allows you to print?
    6. You have security software installed on the computer?

    Method 1

    See the link below and try the fixit tool available, check if it helps.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/

     

    Method 2

    If the previous step fails, then it is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you configure the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. Click Start , and then click run.
    2. Type msconfig , and then click OK.
      The System Configuration utility dialog box appears.
    3. Click the general tab, click Normal Startup - load all device drivers and services , and then click OK.

    When you are prompted, click restart to restart the computer.

  • I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet.

    I use Vista Home Premium on a laptop Dell 1545 Inspiron and Dell 968AIO wireless printer. I can't print the attachments of email but I can print several pages on the internet. I updated drivers and tried everything that other people have told me to try on other forums to the best of my abilities. I'm not otherwise qualified in computer science. Also, I will mention this all started when I restored my computer laptop back to factory settings. I did it because that's all I could think about. As far as coming back on my laptop, he did do the trick. Thus, suggestions, thoughts will be appreciated.

    Thank you

    Jim

    Lima, Ohio

    original title: unable to print attachments from Windows Mail

    Hello

    The print job goes to the queue?

    Method 1:
    I suggest you through the Windows 7 steps in this document.

    Method 2:
    Alternatively, you can try to plug in the printer and the laptop to see if it makes a difference.

  • 8600 premium print and then gives the error message that it cannot print the document that it just printed.

    It isn't really a problem, just a nuisance.

    Last week I printed several documents from PDF files and print documents.  Once printing has been completed, an error message would be displayed on my laptop that the printer cannot print the document.  I've ignored the warnings and continued, and then the printer would print the document again.  I found that if I clicked on the error message, printing in double stop.

    Since then, whenever I don't print from any program (MS Office, Firefox, Chrome, IE, etc), I still get the same message if the end of the print document.

    Just a nuisance, but if I forgot to point out the error, the doc print again without error message after the second printiing...

    I noticed that the queue, regardless of the size of the document, always freezes on the last page to print before closing.

    I turned and turn it back on and reset the connection to a static IP address for the printer wireless...

    Hello DRS1966,

    Yes, I can understand the frustration of getting an error once printed of your document. I'm glad that's not interfering with your documents but would like to try and get rid of it. Please run the HP Print and Scan Doctor- designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

    Please let me know if it detects errors, or that it cures the problem. I'll watch for your reply.

    Thank you

  • How to enlarge a pdf file in 'reader' and print the document expanded

    I can print the size of the original document in the reader.  Can I enlarge the document using the button at the bottom, but I don't see where I can print this "expanded" + document

    Hello

    I suggest you to follow the steps and check if it helps;

    (a) open the file on the drive of a Windows App.

    (b) click print.

    (c) click on the printer, click the size arrow drop-down menu and change the size.

    Try to print now and check.

    Check out the link;

    Windows player: Frequently asked questions

    http://Windows.Microsoft.com/en-in/Windows-8/reader-FAQs

    If you need help with Windows, please do not hesitate to post. We will be happy to help you.

  • Can't print pdf documents recent

    Help! I can't print the recent PDF documents on my HP printer (I sent one to my wife and she can print on his Samsung printer). To complicate things, earleir documents PDF can be printed without a problem.  10 Windows on a Dell PC.  What is going on

    with the recent?

    Hi stephenc91468867,

    You can try the following steps:

    1. assuming you are trying to print the pdf file in Acrobat, try to disable the protected mode - launch Acrobat > go to Edit > Preferences > (protection) > select disabled in protected mode, and then click OK. Then, restart Acrobat and try printing.

    2-If this does not work, try performing the step given in this link: print troubleshooting PDF in Acrobat and Reader

    Could you please let me know if you see an error message when you try to print pdf documents?

    What application you are using to print the document Adobe Reader / Acrobat from Adobe?

    Thank you

    Shivam

  • I can't print the pdf downloaded files without saving them first - but before yesterday I could

    I can't print the pdf downloaded files without saving them first but before yesterday I could

    It wasn't a problem 2 days ago... just start... I click on print and gives me only the ability to save... so I have to save the document, then open the saved document before I can print it

    Hi joeb1542313,

    In the print dialog box make sure "Print to a file" is not checked in the settings advanced.

    Kind regards
    Nicos

  • How can I 'print' the list of passwords saved?

    How can I print the list of "saved passwords"

    You can export the passwords in a file signons.json by evaluating the code in the Console browser (Firefox/tools > Web Developer).

    See:

    You can open the Console browser (Firefox/tools > Web Developer).
    Paste the JavaScript code into the command line, and then press the Enter key to evaluate the code.
    You can enable/disable devtools.chrome.enabled true on the topic: config page to allow the command line.

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

    You can open this file in Notepad (Firefox/tools > Web Developer).
    Click on the button to "Pretty Print" to fit the file for readability.

  • I can't open the documents and photos from the emails that I receive. The Microsoft Essentials antivirus is the problem?

    I can't open the documents and photos from the emails that I receive. The Microsoft Essentials antivirus is the problem? How can I fix it?

    E-mail address is removed from the privacy *.

    Hello, end of file.     PPS Finally today its opening.

    I have incredimail and use ' openoffice.org because I don't have any power point.

    Thank you for your help.

  • How can I print the results of my research?

    I have more than 3000 DWF files in my search results. They are located in different folders on our server. How can I print the results of my research?

    This means that nomo did not read your question carefully.

    I think Directory printer Karen will do what you want.  3000 files is a lot of paper.  You can download Cute PDF Writer and save the output to a PDF instead - at least until you get the options sorted...

Maybe you are looking for