Can I use the XCode with CS6 Flash Pro iPhoneSumulator

I think it's possible, but I can't find clues on how to start.

Anyone know how I can use it. The Adobe iphone Simulator is not very helpful at all. and does that iphone Anuak

Thank you

Assuming that you are aware of the CS6 updates, and you have installed XCode, you do the following:

In your FLA that is configured to use AIR 3.4 or later, look in the application settings, general tab.

You should see a field labeled "iOS Simulator SDK: Here, you put the full path to the Simulator. The path is more likely to be:

/Applications/XCode.app/Contents/developer/platforms/iPhoneSimulator.platform/developer/SD Ks/iPhoneSimulator6.0.sdk

Once you have done this, you should be able to do the two film of Control/Test/iOS Simulator and the Debug/Debug/iOS Simulator movie.

If you do the debug version, wait the progress edition disappeared, the Simulator is open in the background and select Debug/Begin Remote Debug Session / ActionScript 3.0. Once Flash is "waiting for connection", hover over the Simulator and open your application.

You can see that the icon is on the second page of icons. As you would on the iPhone, you can move the icon in the dock of the Simulator, or on the first page of the icons. Then when you other tests the app will be installed in this location.

By using the Simulator will save you hours of time!

Oh, one other thing - you can simulate multitouch by holding down the Option key, which will give you two points in finger on the Simulator screen mirror, which is good for stocks pinch test. If you also have the SHIFT key, you will be able to simulate stock pan.

Tags: Adobe AIR

Similar Questions

  • How can I use the AppleCare with replacements USA helmet in Israel?

    How can I use an AppleCare with replacements USA headphones for my iphone in Israel 6plus? Am I covered overseas?

    Technically, no. The warranty is valid only in the country where the phone was originally sold. However, that restriction is based on the differences between the models of phones sold in different countries and the availability of substitutes service. You may very well be able to get the headphones replaced here since there is no difference between those who were included in phones AND those that are included with the phones sold in your country. Make an appointment at the genius bar or take it to your local CENTER and see what they can do for you.

  • Can I use the jet with the i pad2 P1102w laser printer?

    Can I use the P1102w printer with my i pad or iPhone?

    Hello

    Your printer is compatible with Airprint with the latest firmware.

    Make sure your iPhone / iPad have iOS version 4.2 and more to support Airprint.

    Upgrade the firmware of the printer to your PC by using the tool below, using the tool for your operating system:

    Windows / Mac OS

    You will then be able to print from the iOS built in function print as long as they are connected to the same network as your printer.

  • Can I use the packages with compilation errors

    Hello

    I try to use procedures in a package that includes compilation errors. I wonder whether the remaining procedures within this package is usable or not?

    Or is there a way to only compile the correct procedure within this package?

    Thank you very much

    Murat

    user13795669 wrote:
    Not even Possible, I use execute commands as below

    run immediately "@/ var/mcp/loadUtlPkg.sql';" or with another way?

    No, you can not use as you wrote.
    @ - is a special, synonymous with start , sign command SQL * more.
    You cannot use it with the PL/SQL constructor.

    The only way that you can use the body to package not valid with valid package spec - compile another package, dependent on the subject. Not running - compile.

  • Can I use the M200 with the Portege M400 Dockingstation?

    Or is there another solution that is also used in tabletmode?

    Or is it possible to use dockingstation to the M200 with the M400 without the feature?
    I just need to position the Tablet for easy painting.

    Thank you all

    What docking station do you mean exactly?
    There are different stations that could be used with the Portege M200 from home

  • How can I use the userscripts with Safari 9?

    Is there an equivalent of Greasemonkey for Safari 9, which allows the installation of the userscripts? Where can I get it and how do I use it? Thank you!

    No personal experience with it, but it should approach: http://tampermonkey.net/?browser=safari

  • Can I use the session with the presentation variable variable

    Hello

    I'm using a method join the variable session or repository with the presentation variable.

    I created a variable called 'VarPres' in obiee presentation I created a session with a new block of initialization variable and I made this request

    "{Select fullName from employees where idEmp=@{VarPres}.

    but when I called the session variable in obiee I got this error

    The session variable, NQ_SESSION. S_OBJ, has no definition of value

    Hello

    Does not allow a presentation in an init block variable, simply because there is no variable presentation.

    In general what you try to do probably will never work because of "timing" and is as a session variable.

    A session variable is set once per session, for once he put no exchange of value as the init block is not executed again. So, because of this you already can imagine that there is a problem in your logic, if you want to use a value set by the user in the front end to set the value of a session variable.

  • Floppy disks to install Windows have a related key or can I use the key with any disk?

    Re Activation:

    I help people of disabnled. My blind customer has an OEM version completely crushed of XP and a damaged hard disk, so because there is no CD or the way to reinstall XP, I found an installation CD and, separately, a product code given to me by another disabled person who has dumped his computer and bought a new one. Each CD has its own code of tied product, or can they be separated like this?

    Also is it possible to check a product code to ensure that it is valid and available for use?

    Waddi

    I said yesterday a nearly identical request!

    The machine should have a COA sticker on it (assuming that it is a large manufacturer or pre-installed).

    The key is that the machine is 'owner' and must be valid.

    If the machine is one of the major manufacturers, you can buy recovery discs on their part for this machine, which will restore it to its original state.

    The disks do NOT have a key on them - any drive OEM System Builder for the same edition of XP (Home or Pro) should work well on this machine - but certainly, you will need to download the drivers for it if you get the recovery disks. (once - again see the site of the manufacturer for those)

  • Can I use the Touchpad with my Satellite P100-347 shortcuts and how?

    Hello

    I have a P100-347, I read a few reviews on laptops P100 and in one reading this I came up with this page on a Canadian site where they show the thouchpad of enlightening P100 laptop to turn it into a kind of shortcuts.

    Nobody knows, it is possible to do with the P100-347? If so, how?

    Here are some pictures of what I'm talking about the:
    http://www.NotebookReview.com/assets/11731.jpg
    http://www.NotebookReview.com/assets/11729.jpg

    Touchpad on your P100 looks is like in these photos?

  • When I disconnect my mouse I can not use the touchpad with pointer

    POINTER WORKS WITH THE MOUSE.  HOW TO RESTORE THE TOUCH PAD IN ORDER TO EXPLOIT THE POINTER?

    What is the exact make/model of your laptop? Have you checked to see if there is a way to enable it under control panel > mouse

    I hope this helps.

  • Can I use webroot antivirus with my Macbook pro?

    My husband has Webroot AntiVirus and can add my MacBook Pro.  Is Webroot a recommended product for a Mac?

    No antivirus is recommended for a Mac. From the messages in this forum what do is cause problems. They are not all good.

    I do not use all those apps

  • I brought an old Sidewinder Precision Pro joystick for use with old Microsoft Flight Sim 2000 Edition Pro, I can use the joystick with my Vista Home Premium laptop

    I installed Microsoft Flight Simulator 2000 Professional Edition, on my laptop. I bought an old Microsoft Sidewinder Precision Pro joystick. Can I use the joystick with my Vista Home Premium OS?.

    Hello

     
    What is the model of the sidewinder Precision Joystick?
     
    You can use it with Vista, but sometimes it can cause a problem. Check the link and if you have a problem follow the steps in the article.
    You experience problems when you use a Sidewinder Force Feedback Pro joystick with Flight Simulator on a Windows 2000, Windows XP, or Windows Vista-based computer
    http://support.Microsoft.com/kb/294672
  • Can I use the same CD to install windows 7 in two different parts by buying a new key for the second PC?

    I bought a full version ultimate DVD with two CDs and a windows 7 for 32-bit and one for 64-bit. I had installed the software (64-bit) in my laptop and it got successfully installed and activated with the key writtn on the CD packaging. Can I use the CD of 32 bits that came with the pack to install windows 7 ultimate in my desktop PC? If this is not the case, can I use the CD with a new key? Please guide the installation process

    No, you will need to buy a new product key.

    Unfortunately, Microsoft is no longer product keys is selling, so you could end by would have to buy a new Windows 7 Ultimate license to a third party.

    Full version-

    Microsoft Windows 7 Ultimate

    Version upgrade-

    Microsoft Windows 7 Ultimate Upgrade

  • How can I get rid of the splash screen in Flash Pro cs6

    I used flash in its early versions, but didn't have a reason to use it for many years. I installed it on my desktop and now find myself needing to use it for a small project. So I open the program, and of course, it is open to this really annoying splash screen. and it turns out that I can't find any way to leave this splash screen. My screen resolution is at 1024 X 768, and I can see easily all the splash screen. But what I don't see is somehow too leave this screen which is a real issue because it allows me to continue my project. I even chose one of the enumerated option; "Flash project", but still the splash screen does not disappear.

    How can I get rid of the splash screen & can I make disappear forever. ???

    When you open CS6 and that you can't get anywhere, you can always select Preferences. There, under general, you can select which shows when you open Flash Pro. Change the welcome move on screen.

  • 4 is not compatible with the protection of the identity of simple past on my HP using the player with the tips of the fingers. How can I make it work? IE9 works very well. Should I stop using FireFox?

    I have a HP DV7-4165 which has Windows 7 64 bit and simple features of the HP pass identity protection using the drive with the tips of the fingers. My Firefox support says "If you have the Firefox browser on your computer when your HP SimplePass Identity Protection software is installed, a Firefox extension will also be installed which enables support for the use of the fingerprints with the browser Firefox." Once I updated to Firefox 4 it no longer works.

    You can get Firefox 3.6.16 here:

    http://www.Mozilla.com/en-us/Firefox/all-older.html

Maybe you are looking for

  • How can I put music from my office on the new iPod 5. I am running windows 10 please

    How can I transfer music from my music on windows desktop running 10 to my new iPod 5 Please?

  • Picture toolbar does not open

    How to get the toolbar in photo open in the view tab. It does not allow me to highlight and allow toolbar display.

  • Satellite A215 - where can I get a recovery disk?

    I had my laptop to format two weeks ago, unfortunately they did in Spanish (I live in Mexico at the moment). I researched the recovery disk restore my laptop how it was when I bought it. I lost me and I am in real need of this / these discs. Anyone k

  • Missing faces

    I added all the faces in my photos. If I find a photo in all the pictures and read the information, it shows me the faces in this picture. There is no problem with that. However, if I type a name in the search box, in some cases, nothing is found, i.

  • How will I know when it's done load?

    I have a V570, and on my other laptop (a gateway), the light on the charger lights up blue when the battery is fully charged. With my Lenovo, I have not noticed any seeing who told me when it's over. I don't see anything in the manual about, either.