Can not find the fingerprint reader
I got my drive fingerprnt wet with SOAP and now it can not be found. I always get wet and it is never a problem. It is said there is a problem with my usb port (even if it is built) and it fails. How can I make it work again?
Message:
One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.
I don't want to restore factory default and I'll send it to repair if I can't find a solution. Help, please
Well, I restarted my computer after my back upwards and it's fixed! Laughing out loud
Tags: ThinkPad Notebooks
Similar Questions
-
X 1 carbon Touch Fingerprint reader 'can not find the fingerprint sensor device' e7210005
Hi all
I have spent far too long trying to solve this problem by myself and need to reach out to someone who may have solved this problem. I read tons of questions similar online and restarted from dozens of times after trying many different things.
I have a carbon 3444-GCU Touch who can not see his fingerprint reader. It used to work when it is brand new, but after many updates from lenovo and windows, it now does not work:
I'm on Windows 8.1, with all updates.
No problem in Device Manager.
Coprocessor (WBF advanced mode) Fingerprint TouchChip installed under thin biometric devices.
_Not_ power management value disable device to save power.
The bios is 2.61.
I suspect that the problem is very low, because even the BIOS can not find the device trying to implement.
If I have the lates BIOS, but it can't see the camera - what can I do?
Thank you all...
you have a faulty drive.
-
Compaq nc6400 upgraded xp to win 7 can not get the fingerprint reader to work
I have upgraded xp to win 7, as we will have to do, but can't get the fingerprint reader to work. It appears in the devices that there is one on the machine. I downloaded the drivers for Vista, but they got nowhere. Read in many places as Vista drivers will work but I seem to need more than that. Any clue? Thank you!!!
Hello:
Yes, for Vista fingerprint reader driver is the only one available, but you must install the software HP protect Manager security tools for Windows 7 from the model which succeeded the nc6400, who was the 6910p.
You must also use the W7 driver quick launch buttons.
If your computer laptop bluetooth, you need the W7 bluetooth software and driver...
And you can use the version of W7 HP wireless assistant software.
You can also read the manual tools security protect manager, so you can understand how to use the fingerprint reader.
-
Windows 7 can not get the fingerprint reader to show
I have a T500 I removed Vista and installed Windows 7. But now I can't the fingerprint reader will be displayed at sign in. I think that I have installed the driver, but it does not appear. I went into Device Manager and it seems to be responsible. Any ideas?
You need not fingerprint software from Lenovo. It's just another program that is running in the background.
Windows 7 has all the functions that the software Lenovo offers. Whether you use it or not, it's up to you.
in any case, to get the fingerprint logon to work, you must go into control panel > biometrics. Then you need to check "Allow connections to fingerprints" (or something of the sort). It will ask you to register to use fingers.
The next time you start your computer/log, you will be asked to use your fingerprint to log. It works exactly as it would if the Lenovo program was there (with the sole exception of the sliding-finger-to-boot-computer functionality).
-
I changed the hard drive of a 4440 probook s and I can not configure the fingerprint reader
Hi, I have a probook 4440 s, I changed the hard drive due to malfunction, I used paintings General; I can't set the finger print recognition
Hi Rubio7,
Welcome to the HP forum!
Your Probook is a commercial unit and the consumer forum.
I'm sorry, but to get your question more exposure, I suggest posting in the trade forums, since it is a commercial product. You can do the Forum Commercial/Notebook - HP ProBook, EliteBook, Compaq, slate/Tablet PC, Armada, LTE
I hope this helps.
-
I have adobe reader xi and can not find the "create button" in order to combine several files into a single pdf
Hello
Reader is software to view PDF' only.
You must either a pack PDF to perform the function of thin or Acrobat.
Reader is not the software to perform editing functions.
Concerning
Sukrit diallo
-
Have just got a 550qe of Pavilion and can not find the place where the monitor. The image on the book they sent shows the exact card, I need but can't find anywhere on the back of the PC. There are a few plates little who have the drivers there, but do not want to start removing the panels unless this is where some of the connections are hidden.
Hello
Can't find the official specs of HP. But since the following specifications
There
Ports:
- 2 x USB 3.0
- 2 x USB 2.0
- 1 x HDMI
- 1 x VGA
- 1 x jack Headphone-out/microphone-in the drop-down list
- Multi format card reader
Depending on your monitor, you can use HDMI or VGA to connect. What is your monitor (make and model)?
Kind regards.
-
Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer
Can not find the driver for my Canon Rebel XT/350 d camera to send pictures on my computer
And it is a Windows problem why?
P.S., A lot of people just leave the CF card and use a card reader:
http://www.Amazon.com/s/ref=nb_sb_noss?URL=search-alias%3Daps&field-keywords=CF+card+reader&x=0&y=0
-
Deinstitutionalized drive, my computer can not find the music stored on the internal drive
I was recently released from the balance of PAYMENTS (Bureau of Prisons), and I gladly paid $25 for the reader deinstitutionalized. I got it in the mail and I am very happy with the improvements, however, when I plug it into the computer, the computer cannot find the music that I invested a lot of money. The drive works fine. I can listen to all the songs that are on it, but I can't find them with all software, including the software downloaded from Sansa. When I click on the player, in any program/browser, I get the same thing: the folders that are empty. It saves space, but sees ALL files. Many of the albums available at the bottom of the PYRAMID were incomplete and I want to "fill the gaps", but can not find the whites to fill. Any help would be wonderful. I paid my $95 (for the player AND have unlocked it) MORE about $1400 in the songs, so it's a pretty big deal for me to get access... Thanks in advance.
My guess is, it is a question of USB MSC - MTP mode.
Your drive may be connected to your computer in the title of one of the 2 separate USB MSC or MTP modes. This is located under settings of the player. (There is a 3rd option it, auto-detection, trying to connect under MTP mode but then fold in MSC mode, if necessary.) Is the reason why it's important, files transferred to the Clip under a mode USB can only be seen by your computer when the computer is under this same mode. And so, for example, if the songs are put on the player mode USB MSC, if you connect later under MTP mode, the computer will not see these files. If you have set the player to one of the USB modes and always use this mode (MSC mode is the least problematic, in virtue of which the player is considered to be a USB key; however, MTP mode is necessary for files protected by DRM), you're fine. If, however, you change mode, emits a "invisibility". And if you're ready auto detection, the computer can change the modes on you without you knowing.
And thus, better Board: turn on the player (recommended) MSC or MTP mode and stay there and stay away auto detection setting.
And if you have been on a mode but want to switch to the other and to be able to see all of your files on your computer, set the player to the previous mode, transfer your music to your computer and delete them from the player, re - set the player to new USB mode and transfer the songs back.
-
Hi all!
I'm a newbie here, please help me. Just bought a new laptop, 4520 s and can not install windows in AHCI mode. Very strange things are below:
-I'm reading on this tread: http://h30434.www3.hp.com/t5/Operating-systems-and-software/No-SATA-AHCI-drivers-for-6440b/td-p/2592... And I havea even question...
-Have these:
PCI\VEN_8086 & DEV_3B2D. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 2 port Serial ATA Storage Controller - 3B2D.
PCI\VEN_8086 & DEV_3B2E. DeviceDesc = "Intel(r) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller - 3B2E.
Hardware items, but can not change driver PCHM SATA AHCI Controller 4 Port or Port 6 ... BSOD and reboot even when...
-tried to find out all the correct drivers, no results...
-When it is used the nLite and running the Windows installation again with ACHI (setting in BIOS) mode I just receive this message in the first minutes of blue screen: can not find the ACPI. SYS... Press a key to reboot.
Help me please guys, if you can.
Thanks in advance, Peter
I had the same problem and now works properly. That's what I did:
1 position (BIOS) setting to IDE compatible mode
2. install XPP as usual.
3. install the drivers for the chipset Intel (sp46692)
4. download and run softpaq for Intel Matrix Storage Manager (sp45106)
5. go to the controller Start > Run > devmgmt.msc > IDE ATA/ATAPI
> Port controller 5 series/3400 Series 6 Chipset
6. set to update manually the folder c:\swsetup\sp45106, with option "have a disk.
7. Select "PCHM SATA AHCI Controller 6 port".
Windows says it is not compatible, but it will be restarted from the nest
8 restart the computer, and set its mode controller SATA (BIOS)
9 complete! Windows does not boot ok
I hope you understand my instructions: English is not my mother tongue and may be poorly written. In any case, it worked for me.
Miguel.
-
"windows can not find the new updates" when you click check updates
Hello, I'm sorry for the confusion caused with my previous post. The error I got is 'windows can not find the new updates' when you click check updates. It displays a notification to install the new updates on the desktop and displays the 80072EFD error code. Please help me to get this resolved. Its 32-bit windows 7.
OT:
Windows
First, update your anti-virus software and run a scan completes. Then:
If you have not already seen it this article, it may be interesting to read through to check it out - http://windows.microsoft.com/en-us/windows/windows-update-error-80072efd#1TC=windows-7
If it still fails to run the resolution of the problems of Internet connection (from Control Panel) and see if that finds & correcting something. More details here - http://www.dummies.com/how-to/content/how-to-troubleshoot-windows-7-internet-connection-.html
-
Can not find the downloaded file
I regularly download files, and they will 'always' in the same directory. Now, I downloaded fedora-live-workstation-i686-22-3.iso
of https://getfedora.org/en/workstation/download/and (a) I didn't get the usual "save/open" Download dialog and (b) I can not find the downloaded file. The < downloads - tools > FF screen displays the file as downloaded, but not (AFAICT) where he was placed.Any clarification would be appreciated. Thank you.
(OP) Well, I downloaded the same file again and this time everything went as it should. For example, some of my 'facts' above must be wrong, but I don't know who. I suspect some personal deficiencies.
-
Thunderbird: In write mode can not find the tool bar (or menu bar), then how should I send my email?
Well you can press Ctrl + Enter or you could re - turn on the menu and the toolbar https://support.mozilla.org/en-US/kb/display-thunderbird-menus-and-toolbar .
-
can not find the sleep settings screen on ubuntu 11.10
can not find the sleep settings screen in ubuntu 11.10
-
Can not find the program to burn DVD
I used to burn and copy DVD, XP operating system. Now I can not find the program to do.
Hope that I explain okThank you
not mind too much technoHey,.
What program do you mean exactly?
Nero or what else?For burning and copying of discs, I can recommend that the freeware CD Burner XP tools. It of really small and fast tool, never had any problems with it.
Check this box!
Maybe you are looking for
-
Unbelivably slow MacBook Pro - help very appreciated.
Hello! First of all, I want to thank you all for the amount of time you have helped me sort my MacBook Pro in the past. As a lurker for a long time, I really appreciate the solutions that you have posted on this forum. Unfortunately, my current probl
-
Firefox don't support not any page after some time.
I'm having a problem with firefox while surfing after a while. For example, during the first 15 minutes, there is no problem, after a while firefox does not load any page, I have to close and reopen again to make it work. While firefox does not load,
-
Qosmio F10 - noisy fan & replacement
My Qosmio F10 comes up to 3 years & cooling fan now sounds a bit like an angle with a grinder knocked on the landing when it starts. Now this laptop has had 3 years of intensive use & abuse, sometimes running 24-7 weeks & despite all my friends to go
-
I can not join any freelancer server. I use the mod of discovery, and whenever I try to connect I get a message saying that the server is down or my internet connection does not work. I heard it has something to do with directplay and anti-virus. I u
-
I got an eject safely message, but I don't no matter what plug my USB key
I left my laptop (Windows 7 Professional) in locked mode windows requiring a password. But when I logged in, I got a message on my phone saying I can security eject my drive (I didn't write down the exact message), but I have not used my USB in a lon