Can satellite A100-785 I put vedio memory in the bios

Similar Questions

• Re: Can Satellite A100-172 - I put the HARD drive?

  Im just wondering what what can I put the HDD for my A100? The hard drive now is a 120 GB and its useless at this point due to a problem I had with it.
  I thought I'd go with this one, but I don't know about policy of hardware upgrades from Toshiba.

  http://NCIX.com/products/index.php?SKU=42252&VPN=ST9320423AS&manufacture=se agate

  Thank you

  Valentine's day

  Hello

  I agree with Akuma. You must take the HARD disk at 5400 RPM. It should be pretty fast and produces less heat. It is good for office and multimedia applications.

  I hope you enjoy with your new HARD drive. ;)

• Satellite A100 - 785 PSAANE - CD/DVD drive problem

  Hello friends,

  I have a Toshiba Satellite A100 - 785 PSAANE and its configurations are as follows:

  1.87 C2D Ghz, 1 GB of Ram (512 + 512), Windows Vista Basic, CD/DVD read/write...

  Question: Its been long enough, I m facing some problem with my optical drive. Whenever I insert a CD that is originally made by any company, it works fine. At the time when I insert a CD that is personally burned with any normal CD data / engraver of DVD or CD that have been created previously by the same laptop mentioned above, its been interpreted as a blank disc. The data on the drive are not displayed.

  For example: lets say if I insert a cd of the software as my webcam cd or cd of my printer they can be read normally and work very well. But at the point where I have to enter any cd that was burned by me that contains my personal files, it is read as a blank disc.

  This problem does not exist with any of the DVDs. that is not serious every dvd I insert either being a software normal dvd or one that is burned as a given personal dvd, everything works fine and all the data DVD can be read.

  I tried to reinstall the driver, I tried to reformat my laptop using the supplied with the notebook Toshiba Recovery CD, but the problem persists.

  Between a few months ago, I tried to do a few tweak, as firstly I have insert the cd in the drive and then turn off the reader of cd and then allowing it once again would actually read the cd. But after a few tries, it also stopped working.

  Now I have really no idea what should I do to get my CD to work normally.

  I hope that this message can help out me.

  Your help will be appreciated

  Thanks for your precious time

  Concerning

  Christophe

  Hi Claudia,.

  To be honest, I never heard A785 Satellite.
  You should check the model number again, as wrote Akuma. It would be important to know.

  But in General if you have the same problems after using the Toshiba Recovery disk it seems to be a bad material work because the recovery disc can restore the factory settings.

• Satellite A100-785 - after the virus the bus USB and wireless do not work

  Hello
  I have a Satellite A100-785 with Vista 32 bit.

  I installed the Windows updates and another program. My antivirus detected a virus and delete files and now the USB bus and wireless do not work.
  I downloaded and installed a new driver for my model, but it does not work.

  Help, please!

  And, I want to recover the factory setting but I don't have a recovery CD now. How can I restore to factory settings? If cannot repair with the method of mormal and kare without recovery CD.
  See:
  [http://i39.tinypic.com/rw4f8p.jpg]

  Hello

  You should try to remove the devices that they are marked with a yellow exclamation point. Start Notepad, and then install the latest drivers from the Toshiba site.

  If the virus has destroyed an important system files that it s is no longer possible to install a driver and you need to reinstall Windows using the Toshiba recovery disc.

  Did you create the Toshiba Recovery disk? You can do this with the Toshiba recovery disc creator, which is preinstalled on your laptop. Maybe you are able to do this at the moment.
  In addition, you reinstall Windows using the recovery of HARD drive option. So go to the advanced boot menu and select Repair my computer. Some Windows files will be loaded and then you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you can t create the recovery disk, you must order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Welcome them

• Satellite A100-785 asking me a BIOS password

  I got an error massage and I pressed (default load) and the phone asked me password on the Bios...
  I have not set a password.

  satellite a100-785

  Hello

  Strange that you mean that the Satellite A100 ask the BIOS password that you have not defined?

  However, there is no way to remove unknown BIOS password. Only the Asp technician can do that.
  Therefore, you will need to contact the ASP technician who could remove the BIOS password for you.

  Welcome them

• Recognized and drivers English commercial for Satellite A100-785

  Satellite A100 - 785 PASAANE since I was, I had using win2003 SP2 and all updates, I downloaded all the drivers for windows XP. because its drivers are compatible with 2003.

  But I encountered this problem (see photo below):
  http://img102.imageshack.us/img102/5859/pcidevicequestionmarkdecd3.jpg

  I can't find what is missing still (point yellow question mark)?

  My second query I tried to download 'Wireless Lan Client Manager' at various locations (countries), but still I get it in the Arabic language, how do I download the same 'Wireless Lan Client Manager' in English? also during the installation I don't have an option to choose a language!

  Perhaps you lack driver to Bridge Media Slot 5-in-1 (multicard reader).

  Any manager of WLAN clients I can't tell you much. I installed on two laptops with a different language without any problem. To download, please use http://aps.toshiba-tro.de/wlan/

  BTW: WLAN can also be configured using settings in Windows.

• Driver CD/DVD for the Satellite A100-785

  Hello. For our school, we bought 10 laptops. These PCs come with windows vista Home Basic version. We need to install windows xp sp2 on them, but the problem is that we don't have the drivers. The recovery cd theat comes with those pc is windows vista recovery CD. We tried to download the drivers on the Net and they were very good except the cd/dvd drive. With windows vista we wre able to drag and drop files to rewritable cd or dvd and it worked very well. After you install windows xp on them, we can use cd/dvd as the system writer regarded as normal CD where in fact it is a rewritable cd/dvd. We read by cd/dvd cutter, we cannot write. I don't to not install another software like nero... etc. The model of these PCs are the same:

  Toshiba satellite A100-785

  Model number: PSAANE-02M012AR

  Hello

  usually if you have an XP machine and installed a burner then this procedure should give you the ability to burn:

  http://Dallas.tamu.edu/e-learn/WinXP-CD_Burn.html

  If you really cannot burn General perhaps the service is disabled and must be re-activated:

  http://support.Microsoft.com/kb/279157

  I read something, you must check a box to activate this ability in the last lines of this article.

  Welcome them

• Satellite A100-785: router restarts automatically when the wireless network card is on

  Recently,.
  Once, I turn my adapter wireless for my laptop 'ON' and it starts to connect to my router 3com officeconnect wireless.
  I found that my router restarts automatically.
  This happens each and every time I turn on my laptop with the wireless adapter ON.

  I use the Satellite A100-785 PPPoE ISP with WPA/AES encryption enabled on the new MS Vista platform.
  All drivers updated to the latest versions, and the wireless signal is Excellent.

  Any suggestions that could be the reason or any recommendation to begin to investigate the matter?
  Everything will be highly appreciated. Thank you

  Once again; Your WLan router restarts (reboots) when you turn on the WLan on the A100 Satellite Map. Am I wrong?

  Well, it's strange, but to be honest I n t see a problem with the laptop but with the router. I would recommend controlled again the unique WLan router configuration.

  Good bye

• Error starting on the Satellite A100-785

  With my laptop Toshiba Satellite (A100-785) that I bought recently (less than 4 months), I'm having a problem with this message:

  Intel boot agent FE v4.1.18
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent
  Operating system not found

  BIOS: The first option for the boot sequence is HD, not LAN

  -What is the indicator for the problem of the HD?

  I've read similar thread here:

  [t 15039]

  But I could not find the right answer.

  Concerning

  Hello!
  Try to use your recovery disk, it will set your laptop to its operating state if it finds errors. If this does not work probably you have a job no HDD.

• Satellite A100: drive is not read most of the dvds

  I have a Satellite A100 with the following specifications: [information on PC]
  Model name Satellite A100
  Part number PSAA9E-xxxxxxx
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.30
  Processor Genuine Intel(r) CPU T2300 at 1.66 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 80,286,958,080 [bytes] 74.773 [GB]
  Capacity of the hard drive space free 27,243,552,768 [bytes] 25.373 [GB]
  Video ATI Mobility Radeon X 1600 version = 8.204.0.0

  IDE Device 1 TOSHIBA MK8032GSX
  Interface IDE 2 no
  Version FW IDE Device 3 HL - DT - ST DVDRAM GMA-4082N = HV02
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no

  [Information QFE]
  Windows Update "KB888111WXPSP2".
  Windows Update 'Q147222 '.

  The problem is that I can't open most of the DVD. Some of them were ok before, but lately when I am tring to open just blocks. The light just flashes and nothing happened...

  Can someone help me, please?

  Hello

  It is a never-ending story.
  Many media doesn t work with my drive. I have tested many media from different manufacturers and now I use a some of the TDK media.

  Generally, you will find in the manual the user who must be preinstalled on your laptop a list with compatible and supported CD and DVD.
  These media should work properly and the reader must read and burn without any problem.

  But of course, sometimes a failed drive can be a reason for no reading or no combustion.

• How can I install two OS (Vista + XP Pro) in Satellite A100-785

  Today, I bought a new laptop TOSIHBA SATELLITE A100

  On the other hand when I, but two operation system in my laptop the laptop starts without operating system bootable chooseing, but when I go into the bios to check the sheet music, I can see the vista and the type of folder (NTFS)

  How can I put two OS (vista + xp pro) by chooseing OS WHEN the computer PORTABLE STARTING in Sataellite A100 - 785?

  Hello

  I found a thread where your problem was already discussed, you can easily adapt the instructions on your machine. Just check it

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24901&MessageID=91326

  and give some feedback if you have achieved some success.

  See you soon

• Can satellite A100 - I put in resolution 1280 x 768 on my LCD TV?

  I have a laptop A100-784 Satellite with Intel graphic 945GM (OS vista home Basic, latest graphics driver) and a brand new Sony Bravia LCD TV (KDL-32D3000K, 16:9).

  Of course, for best results, it must use a RGB cable (the above mentioned Sony model has an RGB entry). The best resolution I could get on my TV is 1024 x 768, but according to the documentation of Sony TV, this TV supports 1280x768@60Hz, which has proportions much better. I'm pretty sure that the Intel chipset supports this resolution as well (it can be found in the list of the modes supported generated by SiSoft Sandra), but for some reason, the display driver will never give me a chance to select.

  Simply, when I connect my laptop to the TV, then choose "single view" (TV output only), Intel graphics driver offers only resolutions with 4:3 aspect ratio. The only match between the resolutions supported by the TV and laptop is 1024 x 768, which is 4:3 and leaves a lot of space on the two unused faces.

  Is it possible (simple) to force the Intel 945GM driver to display all modes (resolutions)? Or, at least, to supply 1280x768@60Hz which is my target?

  This problem is driving me crazy. I already spent a whole week trying to solve this problem, without any progress.

  Thanks for your help.

  I can only give you this little trick: go on the site of intel (www.intel.com), download the latest drivers intel for your graphics chipset, then an option screen should be available.

  I had a similar, but with output VGA problem and I solved it by installing intel drivers for my chipset (945GMA), it s so worthy to try it.

  Welcome them

• Can satellite A100 - I put the HARD drive with 7200 RPM model?

  Hello

  I have a Satellite A100-044, I would spend my the 120 GB HARD drive to a more large (250 GB or 320 GB).

  A 7200 RPM would work on this subject? It seems Web compatibility sites they show 5400 RPM more, I would like to set up my laptop for recording/mastering so music wants a fast machine, I don't really mind if it consumes more energy...

  Any thoughts?

  Thank you
  Stone

  Hello!

  Of course, you can swap the HARD drive with a model more fast using 7200 RPM. But as you say, it takes a little more energy. The new HARD drive should be a little faster, especially access time should be lower.

  250 GB or 320 GB should be possible; you need a HARD drive with SATA interface.

  I hope I could help a bit.

  Good bye

• Satellite Pro A100-830 with 4 GB of memory but the BIOS tells me that I have only 3 GB

  I have a Satellite Pro A100-830 and I bought the maximum memory for what is 2x2gb, for a total of 4 GB in my world. When I put the DIMMs in themselves in a slot, the BIOS reports 2 GB. BIOS Bravo! When I put both together, I see only 3 GB in the bios!

  I found this link on the Crucial site. http://www.crucial.com/kb/answer.asp?QID=4251

  Suggest page files, peripherals etc. occupy memory on your system at startup, before the operating system is used I guess. If you do not have the maximum memory installed, you should see the total memory. If you got the maximum memory installed, you will not see the memory used by page etc. files. Why would it be? Why you would see 2 GB if you have only 2 GB but then see 3 GB if you have 4 GB due to the system!

  Anyone can shed some light on this subject and be eligible or reject the information in this link. I need to replace the memory and/or the pc?

  Thank you

  Mark

  This is not a BIOS problem but a Windows.
  I found this info:
  Windows XP Professional 32-bit is limited to 4 GB of address space. If you have 4 GB of RAM installed, it won't show 4 GB in Windows. You will probably get what the size of your pagefile subtracted the 4 GB.

  Some of this address space is reserved for the hardware and the operating system... so you will never have access to the 4 GB maximum in any case. If you want access to 4 GB of RAM +... your best solution is to pick up XP Pro 64 - bit... but this will only work if your CPU P4 has EMT64. (64-bit)
  You can also try to turn on DEP if it is not already enabled... This will also allow EAP that can give you access to all 4 GB

  So finally a response:
  > Do I need to replace the memory and/or the pc
  -> No, everything is ok... you need not to change the hardware

• Re: Can Satellite A100-499 - I use Kingston HyperX DDR2-667 RAM?

  Hello.

  I have a Toshiba Satellite A100-499 with chipset Intel 945 PM and with 1 GB of RAM at 533 Mhz (this is the memory that came by default when it was purchased). I want to upgrade the memory to 4 GB 667 MHz and I saw two Kingston hyperx 2 GB DDR2 - 667 PC2 - 5300 CL4 (KHX5300S2LLK2 / 4G).

  I ' w concerned about the compatibility of this memory with my laptop. Memory that is shown in my laptop (KT667D2 / 2G) in the site web of Toshiba is also kingston and technical specifications are similar, but time lag case which I've not been able to verify. I'm looking for the forum and it seems that Toshiba laptops are very delicate with the memory.

  Did someone knows or has had experience with this combination? I don't want to spend the money to have to sell it later.

  Hello

  Theoretically, you can also use the Kingston HyperX modules. They are very similar to the normal Kingston modules, but they are a little faster. Certain times are may be lower, but this should t be a problem because it will be set automatically from the BIOS.

  A good friend of me always is the HyperX modules for its notebooks and there has never been a problem.
  In the worst cases the modules don't work, that you can bring it back to the computer store and ask Kingston normal modules.