Can't create objects.

Similar Questions

• ActiveX error message: "run-time error '429': ActiveX component can't create object" when running FSX 2004

  Hello, I hope someone can help. I use Windows 7 64-bit. on a high spec pc. When you run FS2004 (Flight Sim program) I get the error message "" run-time error '429': ActiveX component can't create object ". " That seems to relate to the flight or the CMF management computer program. This error seems to inhibit access to the CMF. I tried to load the latest ATI driver, but that makes things worse. Has anyone encountered this problem before? Hope it

  Thanks in advance

  Ianzee

  Hello Diana

  Unfortunately, none of the above worked. However, I downloaded a file recommended by Flight1 (the creators of one of the 2 games I had problems with) surprisingly, thisinstantly solved the problem it is called http://www.flight1.com/dx7vb.exe.

  Perhaps in the future someone else have this same problem with Vista 64-bit where the game, they could also try this "correction". Of course, it worked for me!

  Thank you very much for your help & trouble in front of me, it is appreciated.

  Cordially Ianzee

• Automation server can't create object

  Under Windows XP Home Edition, access user accounts in Control Panel.  Then I select "change the way users log on and out" and the error message "Automation server can't create object ' results."  How can I fix?

  This response helped me a solution.  I tried and it did not fix the problem, but it changed the error message (a message about a recently installed program has disabled the Welcome screen and the fast change).  I remembered having seen that elsewhere in this forum, I went and found that.  He spoke a * GINA. DLL and suggested he remove the registry (to Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\Current Version\Winlogon).  When I did (after properly backing up the registry, of course), voila! My problem has been resolved.  So thank you all!

• Run-time error '429': ActiveX component can't create object

  We have an application (App1) written in VB5.  When App1 is installed, it loads and recorded several custom DLL in c:\program files\app1.  This program works fine in Win7.
  We created a custom application for a single customer (App2).  App2 uses a DLL that App1 records (ddl1.dll).  App2 works fine up until the point he's trying to instantiate one of the routines dll1.dll.  At this point, it throws an error 429.  App2 woks fine on Win98 - XP.  It fails on Win7 and found that it also fails on Vista.
  I tried regsvr32 "c:\program files\app1\dll1.dll", but this is not enough.

  Y at - it something I can do or need to know anout Win7.

  Thank you, Rich

  GRG

  Hello
   

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public to Microsoft on MSDN Developer Network. Please post your question in the Microsoft Development Network - category Visual Basic forum.
   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automation server can't create object 0 code

  attempt to send 123greetings ecard. implementation error. Automation server cannot create the object.  code 0

  Hello

  Automation is probably the server that create a specific code of the card on 123greetings.com

  Their server is under their control, I would suggest that contact you them for support.

• How to fix error code of 296 automation server can't create object 0 code

  I can't print emails, just came up with the line of script error 296, I tried Googling but each site you click on wants to sell a program, try a little, they do not work, has managed to get the refund, they know that their programs do not work. everyone imagined a solution on how to fix.  Thanks Keith.

  Hi KeithHANNAN,

  Thanks for posting in Microsoft Communities. Provide the following information for the better understanding of the issue:

  ·         What version of the operating system is installed on the computer?

  ·         Application of e-mail, you are using? You use a webmail or an email client?

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  ·         What programs do you speak?

  Answer with the information required to help more.

  Thank you.

• Could not open Admin.account.Error box said"automation server can't create object"or"'g_navigator' is null or not an object. Help, please

  the start menu is also black.go in configuration properties and click ok, apply, ok and nothing happens.tried system restore and that didn't work.what else can I do?

  Hello

  · When you receive this error message?

  · The computer is connected to the server or network?

  · You are developing a new application?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed?

  Run the verification and virus scan online if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

• Work with the ActiveX object that is not that can be created in Labview

  I am trying to call a method in a class ActiveX Cayman.ICaymanMachineInfo as shown below.

  

  Unfortunately, the object is not listed as being able to be created. Is there anyway to work around this problem and be able to use the method?

  There is an object can be created similar to the ICaymanMachineInfo called ICayman:

  

  but this does not give access to the method that I need for my project. Any thoughts on how I might be able to move forward?

  Thank you

  
  

• Specified object is not that can be created in my open reference

  I'm having a problem using a type library file.  The file that I use to watch the object I would create as that can be created (that she has a point in front of it and is displayed when I check the box "show only items that can be created")

  

  Yet, when I select the IRemoteInterface2 the reference selected in LabVIEW is the first (IRemoteInterface).

  

  Then, I need to go to the reference, then select the Interface2 as pictured above.

  When you run this I get the error of "Office Open: object specified is not that can be created in Untitled 1".  I wonder if someone understands what is happening with this error.  The type library is registered, and a VB project can use this object... The following VB code:

  Dim WithEvents Remote RemoteInterface
  Dim Remote2 As IRemoteInterface2

  .

  .

  .

  Private Sub Form_Load()
  'create the new RemoteInterface '.
  Remote control = New RemoteInterface ' local
      
  Define Remote2 = Remote

  .

  .

  .

  End Sub

  .

  .

  .

  Remote2.ExecuteScript (strFile)

  .

  .

  .

  Any ideas as to what I can do to access the RemoteInterface2 object

  Thanks for the tip on the use of the variant data to 'convert' or 'access' the other object.  I tried to use the earlier type converter and leading LabVIEW close immediately.  Here's what looks like the solutioin to access both interfaces.

  

• Can we create an association between two objects in view?

  Mr President.

  Can we create an association between two objects in view?

  I want to create an association between two objects, so that when I navigate between the first object and its corresponding data vo are also changed.

  Concerning

  Tender,

  You create ViewLinks for this. The Association is FRO EO.

  See the link for how to create a ViewLinks below.

  Oracle ADF - tips and Techniques: ADF Model: link building

  To create the Association of the entity:

  Oracle ADF - tips and Techniques: ADF Model: creating entity Association

  See you soon

  AJ

• How can I create a new Style that can be applied to an object?

  To the active menu there is a tab called "Styles".  My question is how can I create a new Style that I can apply to an object?  A link to a tutorial or something like that would be helpful, because I can't find anything!    Thanks in advance for helping me eliminate this frustration!

  KomputerMan.com wrote:

  What I want to do is create a style library, which are basically photos of different Woods.

  There are two approaches you can try.

  Clipping paths

  1. draw the shape of the part as a closed path.

  2 position the wood grain image above or below the shape where you want it positioned.

  3. cut

  4. Select the closed path.

  5. glue on the inside.

  See: Using FreeHand MX > content > work with objects > working with clipping paths

  Fillings in mosaic

  1. use the autotrace to vectorize the image of wood fiber, using many colors.

  Using FreeHand MX > content > work of imported using the > Tracing bitmaps > image vectorization

  2. the group the paths (but not the picture) and create a tiled fill,

  Using FreeHand MX > content > using contours and funding > applying attributes in fillings > Using tiles fill attributes

  3 make a style of a filled object tile

  4. apply the style to other objects.

  Judy Arndt

• JavaScript 3D: I can't create the integrated Image of JPEG file object

  I would like to create an Image object from a JPEG file embedded (like object FileSpec, referenced in the names of resources of the 3D stream object tree), later to serve as a backdrop. Unfortunately, the created image object has zero dimension and cannot be used later:

  RES = new resource ('pdf://sunset.jpg');

  Host.Console.println (res.type);  Ok. outputs 'image '.

  
  

  IMG = new Image (res);

  Host.Console.println (img.width +' "+ img.height); not ok. outputs 0 '0'
  

  However, if the image is embedded as an Image XObject in the PDF file that is referenced instead of the dictionary of the specification of file in the tree view of the resource names, the code works and the subject of the Image has a nonzero size.

  Is this expected behavior? I ask because the 3D JavaScript API says that Image objects can be created from embedded resources from file.

  Thanks for any comments,

  Alexander

  OK - it needs these tags. Here is a screenshot of the structure when you use Acrobat Pro (a scene 3D, a single resource being added, "bitmap.jpg") - as you can see that the image is stored as an XObject, with the data of the 3D model in the tree (the binary stream above the entrance of 3DV)

  

  Acrobat 9 and X 3D annotations are stored using the specification in part 9.5 ISO 320000/1.7EL3 - they are similar to Rich Media Annotations, but not exactly equivalent. However if you add a SWF file to a 3D annotation table resource, all annot is repacked as a Rich Media Annotation (/ T:Annot S:RichMedia) with the 3D model and resources stored as objects of the file specification in the elements library. Entries in the RichMediaSettings tree say the rendering engine that it is still a 3D scene, but we do need spend containers like this as a 3D annot has limited the supported for resources non - Image.

  

• Can we create ready prompt objects made in layer industry in file RPD model

  Hi all
  Small question about fast objects. I know that we can create Rapids or filter items in response or Dashboards.Is it somehow, we can create conditional objects predefined in RPD file such as conditional, we create objects in Business Objects? If yes how?
  
  Thanks in advance!
  
  Shivaji

  Many people comes with this issue when you make the migration of Business objects project to OBIEE.

  There is no such facility is RPD, but this can be achieved by creating saved filters in the answers. Filter to create and save the filter with the name, so when you create you can view the saved filter. which almost equals BO safe Conditions. The limitation was you can create messages recorded in BO, here, you can't.

  -Madan

• Can LV86 create enumerations automatically to her role as mother?

  When I place an open/create/replace function, I need to create two enumerations and type a quantity of objects inside the two enumerations. This time consuming (especially if I want to take on the review of the CLD )

  So for LV86 or LV2010, can automatically created enums when I sticks open/create/replace? Whoosh! Like this...

  Really? It can be done? Should what settings I turn?

  Don't know exactly what you mean, but in the example you show, if you give up that work, then right-click on the two terminals with the wiring tool, select create constant, Bam! you have the enum. If this isn't what you mean please elaborate. They don't both automatically created when you drop the function, there is no way to know if you want or plan over these terminals in the diagram.

  If you take the review of the CLD, appear very early, they are supposed to allow you to spend some time, before the scheduled start of the review, the configuration of your environment (LabVIEW settings, do NOT put on libraries, etc.)

  One thing I did, once the review started, was to create a model with some documents before vi, perhaps a model icon. Those editing is faster than their creation from scratch.

• Runtime error 429 - component ActiveX cannot create object

  Hello

  We have a VB6 program running on a machine in our office - running Windows XP Professional. He worked until a few days ago, but now, we get the error:

  Runtime error 429 - component ActiveX cannot create object

  We had a problem with a recently VBA program that was due to an update of Microsoft (KB960715) security and I was wondering if a similar problem could be the cause? Please let me know if you need further details.

  Thank you very much
  Chris

  Hello Chris stammer,

  Thanks for posting on the Microsoft answers Forum.

  If the problem was caused by a windows update, I'll try to see if you can do a system restore and go back before the update has been applied to your system.  Click the number of the KB article and follow the steps in KB.

  306084 KB - how to restore Windows XP to a previous state

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think