Can't get in iPad 3 with the former owners of Apple ID

I bought an iPad 3 a person on Ebay, but it has not removed from its FIND MY IPHONE app or Apple a/c. Any ideas how to use it without having to hope that she contact me later.

There is no all. Locking activation is a measure of protection against theft; Apple unlock than the iPad for you.

(139417)

Tags: iPad

Similar Questions

  • Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

    Current device is registered with the former owners of Apple ID, not allow me to connect with my Apple ID?

    The former owner must unlock with their password, or give you the password. Otherwise, the phone doesn't help you and no one can help you. Get your money back if you can.

    What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • Can not get her do correspond with the timeline!

    OK, so I used WMM a ton and I like it... but I'm doing my film more important still-MY WEDDING and it drives me crazy! The timeline will not stay in sync with the video. If I watch the movie and then pause to split a scene or something, the green line is not where the video ends. If I click on the green line, he jumps in a few seconds then it throws my way edition. I have no idea why it's the doin this cuz he did all the time, just where I need the sounds to match perfectly. Also, it stops responding and keeps restarting itself than all 5 movements that I do. I have a lot of memory, so that shouldn't be a problem, but I'm so frustrated! Any help would be GREATLY appreciated! Red thanks

    OK, so I used WMM a ton and I like it... but I'm doing my film more important still-MY WEDDING and it drives me crazy! The timeline will not stay in sync with the video. If I watch the movie and then pause to split a scene or something, the green line is not where the video ends. If I click on the green line, he jumps in a few seconds then it throws my way edition. I have no idea why it's the doin this cuz he did all the time, just where I need the sounds to match perfectly. Also, it stops responding and keeps restarting itself than all 5 movements that I do. I have a lot of memory, so that shouldn't be a problem, but I'm so frustrated! Any help would be GREATLY appreciated! Red thanks

    ==================================
    This project is perhaps too large and complex. Creation
    several small projects and save everyone in the .wmv
    film format may be a better method.

    When all the movies are finished, you can import
    New in Movie Maker, and then drag on the timeline for the economy
    in a single file.

    Of you can import the files collected DVD movie
    Creation software and allow each clip to have a scene
    (chapter). John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • How can I get subtitles in Spanish on the form, even if the user is English?

    Hello Experts,

    My requirement is

    I run app of the back-end ERP form system, where in I have screen, in which the user will enter the employee # on the home/first entry field screen, then the next step of the form will be launched on the Internet Explorer browser and the details of the employee. The user now has a chance to change the details on the form.

    Initially, the user logs into the system and enters the intranet, right now system knows of the languge user because we are the main user/employee registers in the system of maintaiing

    Now, say for example, User_1 has connected English langauge and user also wants labels/legends of the form in ENGLISH when the form is rendered on the browser Internet Explorer

    Now, let's say for example User_2 has English as connected in the language, but user want to see captions/labels of the form in SPANISH when the form is rendered on the browser Internet Explorer, pls, let me know how?

    But the form is only a (bcz of form that one company has purchased license)

    Thank you

    Hello

    I have a sample for this purpose that you may find useful.

    http://thelivecycle.blogspot.de/2010/01/MultiLigual-forms.html

  • How can I get Mail stop duplication with the new Gmail application?

    I recently updated my 6 to the new Gmail app & I still have the old blue envelope Mail app... which, although is synchronized, it duplicates all my opinions and I get 2 at all but I can not remove it...

    How can I stop it notify?

    Hi x25sjhd,

    Please visit Apple support communities.

    Looks like you want to receive notifications from the Gmail app and the mailer of iOS application, but you do not want to remove your email from the Mail application account. In this case, you can disable notifications for one of these apps in settings > Notifications.

    Use the Notifications on your iPhone, iPad and iPod touch - Apple Support

    Change Notifications settings

    Some applications such as email or social media applications send frequent notifications that could affect the battery life. If you have the show on lock enabled for notifications screen, it could also affect the autonomy.

    To disable or change notifications, go to settings > Notifications and select the app. You can also sort your most recent alerts, order them manually, or group them based on the application.

    Best regards.

  • How can you get firefox to work with the windows subst command locally?

    I want to test my Web site locally using the windows subst command to emulate the root of my site. It works perfectly with IE8 (except IE8 displays the different available to firefox) but does not work with Firefox. All images, sheets, styles and anything with a root path does not work. If I use a relative path (.. /.. / for example) to the objects that they works very well.

    How can I view web pages locally by using a path root of Web site?

    Firefox does not allow access to local files.

    It is always best to use relative addressing.

    See also:

  • Can't get mouse Bluetooth works with the Toshiba Bluetooth software

    I have problem with my MS Mouse. I bought * Wireless Notebook Presenter Mouse 8000 * [http://www.microsoft.com/hardware/mouseandkeyboard/productdetails.aspx?pid=085] the problem is that the Toshiba Bluetooth cannot find all the buttons, so I can't use them.

    It is possible to add the HID profile (for the mouse) or send it to me.

    You have any software with this mouse? Have you installed?

  • Can't get WAP121 to work with the switch SG100D - 08 p... why?

    If I connect my WAP121 directly to my router, it works fine.  But when I connect it to my SG100D switch - 08 p I can see, but when I log in, I get "limited connectivity" and he can't "identify."  The switch is PoE and everything seems to work well, but I have tried PoE and steady through the switch; nothing works.  Does not understand why if I connect it cat-cable goes into the switch it works fine, but when I coonect it through the switch, I have problems.  I thought that this switch was unmanaged, but something is happening.  Any ideas?

    Nathan, the default state should be fine. Try to upgrade/flash the firmware and reset the device and try again.

    -Tom
    Please mark replied messages useful

  • Dell Precision M90 recently upgraded to x 64 Win7 can not get correct graphics, stuck with the Standard VGA Graphics Adapter Card

    I have a Dell Precision M90 laptop and recently upgraded to Vista 32 bit to 64 bit Windows 7.  Everything worked perfectly, except for my display drivers.  Windows 7 installed a driver called Standard VGA Graphics Adapter.  This driver has a very low resolutions only and cannot deal with games or same Aero.

    I had an experience with updated video drivers with Vista.  My graphics card is a NVIDIA Quadro FX 2500 M.  When I had Vista there is no Vista compatible driver for this card, so I used the Geforce 7900GTX driver (which is inspired by the FX 2500 M) and it worked fine.  Of course, the Quadro FX 2500 M doesn't have a driver compatible windows 7.

    I downloaded the driver for the 64 - bit Windows 7 Geforce 7 series so I could upgrade and use, however when I used the NVIDIA installer it says that my computer has no compatible hardware for this driver (I tried to install it in Vista compatibility as well).  I tried to force the upgrade by using the option "have disk" and choosing the .inf directly file.  This did not always and said that he could not work because "the selected driver for this device does not support this version of Windows" even if it is the version of Windows 7.

    I also tried to start my computer in safe mode, uninstall the VGA Standard driver and then install the driver NVIDIA, but it does not work either.

    Sorry for the long post, I just wanted to add as much information as possible I hope to solve this problem.  Thank you for taking a look and thanks for your suggestions!

    Fixed!  Finally!  Dell.com took the pilot... but the link that they had posted on the page of Precision M90 was mislabeled.  I tried another way, found the good pilot, and got, it works.  Solved the days and days of frusturation.

  • How to remove TeamviewerQS.en.exe from my office. It is not on my list of programs so I can't get rid of it with the button 'Add or remove '.

    I was fooled by the very plausible people who claim that they are a licensed Microsoft customer care company. They installed 2 programs, one of whom was TeamviewerQS.en.exe. I have tried to remove it, but so far have not been able to do. Any suggestions?

    If you receive a call from 02 80057860, think about it and be careful.

    Try this uninstall tool. They offer a free 30 day trial.

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    Hope this is useful

    Note: you always have the possibility to uninstall if you do not want to buy.

  • How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

    I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
    The address was not included
    Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
    You may need to install additional software to open this address.

    The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

    Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

    Thank you in advance!

    In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

    Problems with this program to third parties, please see the support forum:

  • I recently got an iPad Pro with the intelligent keyboard. Is there another case, that it can be used with the smart keyboard for more protection?

    Is there something else that can be used in conjunction with the smart keyboard from Apple for my iPad Pro?

    What about the back/rear of Apple/cover for iPad Pro?

    http://www.Apple.com/shop/product/MK0D2ZM/A/iPad-Pro-silicone-case-charcoal-gray? FNODE = 9 a.

  • Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    Windows xp does not start, I can't even in safe mode. I just get a black screen with the mouse arrow. What can I do

    You have all the features non-essential related to the machine?
    Have you installed a new hardware or software recently?

    Try to do a repair install and see if it corrects the problem.

    How to perform a Windows XP repair install

  • I erased my iPad 2 with the intention of him giving suite.  Now it does not open with the old password.  What can I do

    I erased my IPad 2 with the intention to follow him or to sell.  I found a job for her and decided to keep it.  Now, it will not accept the old password that I used for years...  4 figures

    Try this: If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

  • How can I get FireFox to work on the first Google ChromeBook addition? He repeats to me upgrade and when I do it says does not support?

    How can I get FireFox to work on the first version of the Google ChromeBook? Everytime I open it it said to update or upgrade to FireFox and make it your main page. So I downloaded it and it's open once it is installed, but then a message appears that says "can't stand" search for an application that supports FireFox and its software, or something of the sort. I was sitting here with a full battery when I started and now it is dead... and I still don't have FireFox on my ChromeBook.

    What do I do now or how do I get it to work? And if it just simply won't work on a CHromeBook then they need to have that riht out in the open.
    

    Hello

    I had a peek in this and was informed that Firefox does not work on Chrome OS.

    It is designed and done a little differently from the likes of Windows and Linux and will not support another browser being installed.

Maybe you are looking for