Can we change text "Grand Total" in the analysis of OBIEE11g

Similar Questions

• Can you change text of reversal in the same range for different triggers?

  Hi, I have not used Fireworks since version 3, which was about 6 years ago when I dabbled in web development.  My past has turn against me, and I need to make a pretty simple site quickly enough for my boss.  I myself have CS4, and now that I understand that you can only use the buttons for disjoint bearings, I begin to make progress...

  What I want to achieve, is that there are 6 "buttons" on my page, which, when they you flipping them will display the text in a box on the side.  I would use separate boxes for each button, but there is not enough space on the page, because there is a lot of text, so I would use a box at the same place to display all 6 texts, according to which the button is reversed.  Is this possible?

  I have no doubt entirely my head layers round and this may be very simple, but could someone please point me in the right direction, even if it is a link to the right drill bit using the product?

  Because the reversal disjoint button does not work, I created 6 slices for triggers.  I first tried the hot spots, but could not use them as I want as a direct substitution trigger the filter effect.

  Yes, you can trigger the different content on the postponement of several other sections.

  It is easier to show the describe statement, so here is a sample file that does what I think you are looking for:

  (1) six buttons

  (2) each button a unique text

  (3) each button corresponds to a rollover State

  (4) single text appears in the same place for each button on turnover

  I hope this helps!

  Dave

  Right-click and save the image below - it's a Fireworks source file:

  

• Running Total Grand Total of the columns of the report BEEP

  Hello
  
  I was getting NaN on my totals using the set_variable/get_variable below:
  <? xdoxslt:set_variable ($_XDOCTX, 'VAR1', sum (ssGroup))? >
  
  <? xdoxslt:get_variable($_XDOCTX,_'VAR1')? >
  
  I also need help on getting my corrected where grouping the following grouping:
  
  ssOwnedBy
  -ssImageType
  
  It must be grouped by ssOwnedBy then ssImageType and Totaled by ssOwnedBy and a Grand Total at the bottom.
  But the problem is that the ssImageType shows several lines, where it should appear only once shown below:
  
  FULLTEST < ssOwnedBy >
  -Claim 1 2 1
  -ME 2 1 3 package
  -2 1 3 passive patient
  Total 5 4 7
  
  DCA0970 < ssOwnedBy >
  -ME 1 3 2 package
  1 3 2-total
  
  Grand Total 6 7 9
  
  Can someone please?
  
  Thank you

  Can you send me the template RTF and xml to [email protected]? I can take a look and try to help.

  Thank you
  BIPuser

• Why can't change my email address in the profile change for communities?

  Why can't change my email address in the profile change for communities? I won't be able to get the email with the former in the future.

  Because the e-mail address is connected to your Apple ID, which is used to connect to the CSA. You must change the Apple ID.

• I can scan a text document directly in the Pages?

  I can scan a text document directly in the Pages?

  The Pages ' 09, or Pages v5.6.1 allowed scanner captures in a Pages document. You need to use a snippet and use the file menu: import from a Scanner. Then you can copy/paste this PDF pages result as an object. If your scanner is equipped with optical character recognition software, it can convert the text in PDF, Word or text document.

• How can I change windows 7 back to the original appearance of the classic?

  How can I change windows 7 back to the original appearance of the classic?

  Hello

  I see what you mean - try the following.

  Open windows control panel, open ease of access Center and click on make the mouse easier to use.  In the next window, under the heading "Make it easier to manage windows", uncheck the box "Activate a window by hovering over it with the mouse", then click apply and then click Ok.

  Kind regards

  DP - K

• How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?

  Outlook:

   

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

  Windows 7 network connection status sent/received packets in bytes by default. How can I change this setting so that the status is displayed in MBs.

  Hey Muhammad,

  Thanks for posting the query on Microsoft Community.

  Design/default it appears in bytes not in MB.

  In the future, if you have problems with Windows, get back to us. We will be happy to help you.

• I can't change my .dwt file, neither the code nor the design, what can I do?

  I have problems with a .dwt file that becomes uneditable. I can't change a .sidebar, nor by the code or design.

  What can I do?

  According to the document (index.html) the model used is in the Templates/Templates subdirectory as per

  However, Dreamweaver searches the model the Templates subdirectory.

  If I were to unravel the problem, I would

  1. ensure this index.dwt is located in the Templates subdirectory
  2. recreate the documents based on the template

• How can I change my Premiere Pro to the English version?

  How can I change my Premiere Pro to the English version?

  Hi Leong,

  Please see: -.

  FAQ: How can I change the language that appears in my creative cloud app?

• How can I change my email address on the mail of verification of creative cloud?

  How can I change my email address on the mail of verification of creative cloud?

  This is a very old post, email verification issues can be sorted by contacting Adobe.

  Concerning

  Stéphane

• How can I change text size and point via the command prompt?

  I want to create a script that will allow me to easily change to or from my TV to my monitor. I know how to change the display, but I don't know how I can change the size of text and point via the command prompt (that is, from 100% to 150%). Does anyone know how?

  Unfortunately, you can not.  In addition, change the DPI requires reboot (or logout and back).  But you can apply a different theme, that you can call from the command just by opening the .themepack file.  Since themes can control the size of some elements of the police who might do the trick you are looking for.

• Add text/text legend - can't change text properties (grayed out)

  I use Adobe Acrobat DC (v 15.017.20050).

  I tried to insert the text box and the text caption - I had not been able to change the text before, but since last week, I am unable to change text properties in the two commands.

  

  The properties of the area itself still works

  

  Please let me know how to solve this problem. I tried to uninstall and reinstall and it works only the first time, then the problem continues.

  Thank you very much

  Papon

  Hello

  We have released an update today which solves the problem of the properties toolbar and now you can continue to use it outside of the app commenting as well. Please open Acrobat or Reader DC and visit help > check for updates to ensure that you are on the latest patch.

  Details on the release: https://helpx.adobe.com/acrobat/release-note/acrobat-dc-august-02-2016.html

  Please let us know how it goes.

  Thank you

  -ashu

• Can I change default display width in the integrated PDF Viewer?

  I almost always want to view a PDF in "page width" but the zoom default 'auto' setting always displays them to fill the height rather than the width of the window and I have to modify manually every time I find a PDF file. Can I change this setting somewhere?

  Hi cfcentaurea, you can define a view by default as follows: enter Subject: config in the bar firefox address (confirm the message information where it appears) & search for the preference named pdfjs.defaultZoomValue. Double-click it and change its value to the width of the page (this should affect all new documents you open).

  https://github.com/Mozilla/PDF.js/pull/3850

• BBM I can't change my full name or the RFP or the status!

  I tried several ways but it still! Whenever I click on my full name my bbm stop working! also I tried my profile of light, but this app is only for status! I need to change my display name!

  Help, please!

  OMG I solve the problem!

  Firstly I have reset but did not work also, but I got tired of another way...

  I connect with the same ID BlackBerry, my samsung bbm and I change what I want... then I reset again to my q10 and then! I connect to ID of BB and it's the same thing I change in Samsung... ALSO! I can now change too in my bb!

  Finally!, in any case thank you guys for your help