Can we delete the views created for a user in Oracle BPM J2EE WL

Similar Questions

• IProcurement, can I change the requisitions created by another user?

  Hello

  IProcurement, can I change the requisitions created by another user? If so, how to set? Thank you.

  Concerning

  Leo

  Hi Leo,

  iProcurement is designed for the entire organization, and threre is a few restrictions as only the picker can modify the request. In rellease 12, there is a concurrent request to change the preparer if necessary:

  How to change mass employees end/unavailable (applicant, trainer) in the approval of the application and the process of application for change of version 12.1 (Doc ID 1432778.1)

  Thank you

  Clarino

• Can I delete the second partition after recovery media creating?

  Hey,.

  I just create recovery media, with 2 DVDs and I wonder if I can now delete the partition on the HARD disk, which contains a folder named "HDDRecovery" called 'Data'

  I ask here because I don't want to do something stupid. Thanks in advance for the answer

  Hello

  There is nothing special, just remove them as you usually do. The thing most important you have already made the recovery discs. :)

• Delete the partition created in reformatting/reinstall for A50

  Then when I got my Toshiba Satellite A50, he had no partition that I knew of, just a drive C with XP installed on it. But the disk that it came with to reformat the hard drive and reinstall XP is creating a partition!

  So it's not the original or set up installation I've had... I have an external hard drive, I don't want a partition.

  How can I delete the partition? I'm ready to completely reformat the entire hard drive again, but if so, how do I that?

  The Toshiba CD doesn't really give me a prompt to go reformatting the hard drive me...

  The other annoying, that of my C drive is NTFS, but the disc creates a drive NTFS and FAT32 other... too... which is really scary, is when the Toshiba disk loads, it says "loading Windows 98"... to my understanding of my laptop NEVER had 98 on it... I pray that this is not a 98 - xp upgrade. It seems that someone gave me the wrong drive with my laptop computer?

  Or am I worrying over nothing?

  Hello Lou

  Believe me worry for nothing! Please don t be confused about W98 loading message. The unit starts in DOS mode and it's the same as on W98.

  Now step by step explanation: I did the procedure of recovery many times and have a little experience with it.

  When starts, CD recovery menu displays with two options: modes of STANDARD facilities and EXPERT. STANDARD mode simply erase the whole HARD drive and creates one partition (the whole HARD disk capacity) for the installation of the OS.
  EXPERT mode should be used if you want to install the operating system on already created partition or if you want to create a new partition for the installation of the OS. Note You can create only the first partition it (C :) and you can not edit already created the partition.)

  In my opinion, it is always good to have two partitions, one for the operating system and installation and a second for recording data. You might not always drive external HARD with you. If something is wrong at any time, you can install the OS on the first partition without losing the data stored on the other.

  Anyway, to start the recovery procedure and choose the recovery STANDARD (option 1) procedure. The whole HARD drive will be formatted and Os will be installed on a partition.

  Bye and if you have any other questions please write again.

• How can I delete the icons of my Cyber Shot camera viewing area?

  How can I delete the icons of my camera Cyber Shop viewing area?

  Thanks for the model #. Press the DISP button repeatedly until disappear indicators. Detailed information on changing the display of the screen are mentioned on page 18 of the manual.

  http://www.docs.Sony.com/release/DSCS750_handbook.PDF

  If my post answered your question, please mark it as "acceptable Solution".

• How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

  How can I change the background color for the bar 'help file edit view history bookmark tools' in Firefox 29,0

  You can add a theme of solid color to change the color of the top of the browser window, which contains the Menu bar.

  https://addons.Mozilla.org/en-us/Firefox/themes/solid

• Where can I get the URL scheme for adding / deleting/search a contact of the people app

  Original title: application Windows 8 Metro people...

  Where can I get the URL scheme for adding / deleting/search a contact of the people app

  It is not a URI API for this application.

• How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  How can I remove the tones created in garageband that have been uninstalled? I also installed but I can't remove it either please help thanks

  Hello Michael,

  Welcome to Apple Support communities.

  I see that you need assistance, removal of GarageBand ringtones that were uninstalled. I know it's nice to be able to properly manage your tones. I can help you with this.

  Use the article for iOS (iPad) 2.0.x GarageBand: GarageBand share songs, more precisely, this section:

  To remove the existing ringtones follow these steps:

  • Press to select, then press the button Delete for any ringtone you want to delete.

  • Drag a ringtone in the list, and then press delete.

  Have a great day!

• After removing the Dual Boot, I can't delete the old partition

  Some time ago I installed an SSD and I have Windows 7 installed in Dual Boot with the Windows 7 system.
  So, I had two versions of Windows 7, which worked well.

  Now I no longer use the old system, I disabled the function of Dual Boot. I want to format the old drive, but it does not work because Windows still sees it as active system partition. In addition, I can't delete the partition.

  How can I format or delete the old partition?

  

  I already tried Msconfig, Bud that did not help. Default Msconfig begins with 'selective startup' and an operating system that is displayed in the Startup tab. When I select 'Normal Startup' there are two operating systems that are listed in the Startup tab. When I delete the old and reboot, it is back again...

  Who has the solution?

  (1) create a system repair disc (if you do not have an installation disk for Windows 7 for the version of Windows you have installed).
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  (2) then remove the hard disk you want to format. Now try to start the remaining version of Windows. You should see a missing bootmgr message. Proceed to step #3.

  (3) Bootmgr is missing, message or black screen with cursor flashing
  (See method #2 in this Wiki article)
  http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/Bootmgr-is-missing-message-or-black-screen-with/73fef5b7-5a7f-4910-a2b0-7219e9ec1646

  (4) after you have created the BCD store on the remaining drive (to step #3 above), it should start up on Windows and also be the partition 'Active'.

  (5) shut down the PC and set the old drive, turn on a load Windows and then delete all the remaining partitions on the old disk.

  J W Stuart: http://www.pagestart.com

• How can I delete the files in C:\Users user profile?

  Hello

  So some time ago I deleted some of the user accounts that are no longer used and removed the normal way to user accounts in Control Panel. However, they are still visible in C:\Users who is annoying me, especially since they are not used and are empty directories just for non-existent users. Can I go ahead and delete records directly from C:\Users without any problem?

  However, one of them is simply called 'Administrator' and I think that it's the hidden/master administrator that I activated once per command line and then off after that I tested something. I remember that I have disabled this account administrator via cmd, then it will be allowed to simply remove this profile from C:\Users too, or would there be other ramifications as it's almost like a "master admin account?"

  Thank you.

  Hello

  you can delete files without problems. In what cases are only profiles (desktop, Documents, etc.) users deleted at this time.

  If you want to (sometimes later) log in as administrator or you will create some another user, the new profile will be created.

  Note: do not delete the folder 'Public' in "C:\Users".

  LC

• How can I delete the emails stuck in my Outbox of Windows 8?

  I created an email with lots of photos in there and it's too HUGE to deliver and if it is stuck in my Outbox.  This slows down then e-mail any entry in or out!  IF SLOW!  How can I fix?  There is no option to delete in the Outbox!

  Hi Zena.

  Thanks for posting in the Microsoft Community. Enjoy the detailed explanation of the issue.

  Are you using a Microsoft or a local account to connect to the computer?

  Method 1: I suggest you run the troubleshooter App from the link and if it helps.

  http://go.Microsoft.com/fwlink/?LinkId=268423

  Method 2: I suggest that you remove mail, Outlook and Live accounts and re - sync the two. If you use a Microsoft account so it would not be possible to remove it from the Mail app like that defined a default in such a case, you can only delete the second account and Resync. Check if the problem persists.

  Method 3: Check out the link and follow the methods 'update your app' and also 'license app Sync' of the article.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  I hope this helps. Try the above steps and get back to us for assistance. We will be happy to help you.

• Can I delete the old name of properties?

  In Adobe Captivate 8, I created a group. Then I went to properties and baptized. I made a change to the Group and thought that I deleted the old name of properties. However, when I try to give the same name to Captivate 8 properties says I can't. Where can I delete the old name of properties?

  Thank you

  

  I'm sorry, that Captivate memory can be very stubborn. For most of the names, even if the object with the name has been deleted, you can not reuse them. They are stored in memory "file."

  There are a few exceptions (such as shared action names), but groups is no exception. My solution: change one of the characters of a capital, or insert underscore. Almost the same name.

• Can I delete the local data store on esx 3.5?

  I have a client with vmware ESX 3.5 no esxi

  They have a local data store but it is formatted with a block size of 1 MB, so I can put only a 256 GB VM out there and I need to put a test VM with a larger size.

  I know that in ESXi 4 you can simply delete the local data store and create a new, but I'm not familiar with ESX 3.5, are there hidden files on the data store that the server uses?  If I search for the store there's nothing in there.

  Thank you

  Mike

  Hi Mike,.

  You can simply reformat your data store. Take a look at the following article:

  • http://userssuck.com/2007/07/12/how-to-change-the-blocksize-of-a-VMFS-filesystem/

  Of course, you must back up and delete any data you have on this data store before the format operation.

  Good luck!

  Concerning

  Franck

• How can I delete the 'distributed' and 'response' to my form?

  I created a form for my clients to fill out.  I want to be able to post the form on my site, then the customer can download, edit, save, print if they like and send it to me manually.  I don't want the form to have a button "submit", nor do I wish to have answers about caterpillars.

  Currently, I have a form that is set up like that.  How can I delete the criteria in the form who is in charge of emailing me as well as the response followed file?  I want the form to be devoid of any link to my email, but also any file response on my end.

  Would be very happy if someone can help...

  Thank you
  Vincent

  For some strange reason, Acrobat Standard does not allow you to edit JavaScripts at the level of the document, use a different approach.

  The first thing to do is to find the hidden button and to be visible. To do this, select the tool select an object, which is a black arrow pointing upward to the left. When the tool is active, you should see the previously hidden on the first page button:

  

  Double-click the button and go to the general tab and set the drop-down list in the area of common properties visible form field. Then go to Actions tab and remove the "execute a JavaScript script' the mouse to the top of trigger action.» Add a new action of the trigger JavaScript mouse up, and then enter the following two lines of code in the Editor:

  getAnnot (0, "adhocFormState") .destroy ();

  addScript ("FormsWorkflowScript", "/ /");

  Then close the dialog box, select the hand tool and click the button. This will effectively get rid of the JavaScript to the document level and the annotation of text hidden. You can now remove the button by selecting it with the tool select a new object and press DELETE or right-click > delete

  That should do it.

• How to find the views created on a table... ?

  Hi all
  
  I have a table name, EMP. I want to know what are the views created on this table. Is there any SQL query is there for this or any other
  How to find.
  
  Thanks in advance.
  PAL

  You can use ALL_DEPENDENCIES to this:

  SQL> create view emp_v as select * from emp;
  
  View created.
  
  SQL> select name
    2  ,      referenced_name
    3  ,      referenced_type
    4  from   all_dependencies
    5  where  name = 'EMP_V';
  
  NAME                           REFERENCED_NAME                                                  REFERENCED_TYPE
  ------------------------------ ---------------------------------------------------------------- ----
  EMP_V                          EMP                                                              TABLE
  
  1 row selected.
  
  SQL> select name
    2  ,      referenced_name
    3  ,      referenced_type
    4  from   all_dependencies
    5  where referenced_name = 'EMP';
  
  NAME                           REFERENCED_NAME                                                  REFERENCED_TYPE
  ------------------------------ ---------------------------------------------------------------- ----
  EMP_V                          EMP                                                              TABLE
  EMP_TRG                        EMP                                                              TABLE
  
  2 rows selected.
  
  SQL> 
  

  Remember it's important if you limit the NAME or REFERENCED_NAME.
  http://download.Oracle.com/docs/CD/B19306_01/server.102/b14237/statviews_1041.htm#sthref935

  Edit

  Ah, Gave!
  If you don't want to teach him something and become independent?

  Now you made me feel guilty ;) (don't know what that Johan position initially, but anyway...)
  I blame my currently terribly slow connection for this...

  Anyway, OP, always start a quick search of the documentation first.
  Chances are that you will find you your answer.
  Houses:
  http://www.Oracle.com/pls/db102/homepage
  http://www.Oracle.com/pls/db112/homepage

  Published by: hoek on 15 October 2010 14:53