Can you be more the pair an iPhone with an iMac?

Similar Questions

• Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  Can you turn off the shutter sound on the factory unlocked iPhone to the Japan 7?

  I am going to Japan November 2016 and plan to buy unlocked (no sim) iphone to use in my country (Thailand) 7.

  However, I have read some post on 'mode of politeness' in Japanese phone but the conclusion is not clear whether you can disable shutter sound (without sim) unlocked iphone 7 or not. Then, someone could share on the current situation?

  Thank you

  No, its required by Japanese law shutter. Even if the iPhone is

  is no longer in Japan, you will not be able to turn off the shutter sound.

  You should also check with the seller to be sure you can get the

  iPhone unlocked from the Japanese wireless provider to use with your

  carrier in Thailand. And check that the iPhone is unlocked before leaving the

  retailer.

• If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?

  If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?
  (sometimes, someone answers my question, and I want to mark it as the solution and am not yet quite ready for the thread be closed...)

  If you still experience this issue, you can return to this thread.
  But, you must clear the flag solved .

• do you need to always have your iPhone with you when you wear the watch?

  do you need to always have your iPhone with you when you wear the watch?

  Answer brief No.. The watch can do many things with the phone. If you have the 2nit series has built in GPS so it can follow, see this.

  How to use your Apple Watch without your iPhone in the vicinity - Apple Support

• Can you have notifications to both your iPhone and your Apple Watch?

  Can you have notifications to both your iPhone and your Apple Watch? It's a problem for me if I am away from my iPhone and my Apple Watch does not receive the notification.

  Hello

  How notifications behave depends on the State of your devices. In order to provide notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or asleep and that your watch is unlocked and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  About notifications on your Apple Watch - Apple Support

  You can see that if you turn off your wrist detection (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection) it will make all notification alerts to be delivered to both devices. However, you will not then be able to benefit from features including Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notifications to be delivered for both devices regardless of the other settings, you can suggest to Apple here:

  https://www.Apple.com/feedback/watch.html

• Then use disk defragment, can you defrag more then one drive at a time.

  Then use disk defragment, can you defrag more then one drive at a time.

  The defragmentation occurs for all hard drives connected only.

  You can open Disk Defragmenter, to start defragmentation. When the process is happening on a particular partition, you can stop it and she will continue with the next partition.
  But the process cannot operate in parallel; He will perform a defrag each only.

• can you tell when the Apple Watch is loaded from the main screen?

  How can you tell when the Apple Watch is fully charged? Is there a way to check without open eyes?

  Hello

  On the watch faces, you can add the complication of the battery, which shows the level of battery charge.

  • Customize the face of your Apple Watch - Apple Support

  During loading, you can then check on the current charge level by tapping on the screen.

• Is it possible to pair my iPhone with my car stereo and my hearing aids at the same time.

  Is it possible to pair my iPhone with my car stereo and tooth blue hearing aids at the same time.

  I've never been able to 2 bluetooth devices at the same time work with the phone

  If it is coupled with my car and then he throws the bluetooth headset and vice versa

  Not sure, there is a way to allow both

• I use systec usbmodule1 to send and receive messages CAN one have tried this in labview?, if so can you send me the code please

  I use systec usbmodule1 to send and receive messages CAN one have tried this in labview?, if so can you send me the code

  Thank you

  Hey,.

  All our drivers CAN have been written for CAN of National Instruments hardware (referenced here: http://digital.ni.com/public.nsf/allkb/E2C6ED025C798C5586256F4E00520448 ). So, you will need to manually, code all your communications unless Systec provides a LabVIEW driver. There could be several dll files Systec provides for communication, which you will be able to access through LabVIEW. Take a look at the node of library function call, which is in the range of functions under connectivity-> libraries & executables. Here, you can call a dll file, as well as the different functions in this dll.

  I suggest posting your question either on the forum of LabVIEW, as mentioned previously, or on the forum CAN found here: http://forums.ni.com/ni/board?board.id=30

• How to check my internet speed in windows 7? can you tell me the steps?

  How to check my internet speed in windows 7? can you tell me the steps?

  There are many sites to test bandwidth speed, Speedtest.net is one of them:

  http://www.Speedtest.NET/

• I lost my hp laserjet 1005 p driver can you send me the driver?

  I lost my hp laserjet 1005 p driver can you send me the driver?

  Hello:

  Here is the link to the support page and drivers for your printer.

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3435675&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3435674

  Paul

• Please can you tell me the maximum file size by default to an attachment in the v12 case management?

  Hello

  Please can you tell me the maximum file size by default to an attachment in the v12 case management +? I am able to set a maximum size for attachments, but I'm not able to see what is the default value.

  Thank you

  Kind regards

  Anthony

  Hello

  Attachments by default max size is 8 MB.

  Kind regards.

  Mike

• Can you please update the link for the standalone installer of flash player?

  Can you please update the link for the standalone installer of flash player?

  Link: http://fpdownload.Macromedia.com/pub/flashplayer/updaters/11/flashplayer_11_plugin_debug_3 2bit.exe

  Source: http://kb2.Adobe.com/de/CPS/191/tn_19166.html#main_ManualInstaller

  Source: http://forums.Adobe.com/thread/889580

  Key of dogs says:

  Source: http://kb2.adobe.com/de/cps/191/tn_19166.html#main_ManualInstaller

  It is an old document (Flash Player 10.3) that should not be there anymore.  (The English document redirects to the link below).

  Download links for installers for FP 11.2 offline are here tall_in_a_firewall_proxy_server_environment http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#Ins

  I've updated the download links for 10.3 FP in http://forums.adobe.com/thread/889580

• Can you explain why the "analytical" Word is used in Sql

  I found to define the "analytic function" phrase is such: "a piece of syntax that is originating excessive."
  I don't understand why's called it "Analytics". In English 'analytical' comes from the word "to analyse" which means the examination of something. So it looks like "analytic function" should review/analyze something? but all the functions examaine/analyze something. If I group by article in my request, then all aggregate functions will conduct the review of the data, then why I call them better too 'analytic (al). Can you explain why the "analytical" Word is used in Sql world?

  CharlesRoos wrote:
  I found to define the "analytic function" phrase is such: "a piece of syntax that is originating excessive."
  I don't understand why's called it "Analytics". In English 'analytical' comes from the word "to analyse" which means the examination of something. So it looks like "analytic function" should review/analyze something? but all the functions examaine/analyze something. If I group by article in my request, then all aggregate functions will conduct the review of the data, then why I call them better too 'analytic (al). Can you explain why the "analytical" Word is used in Sql world?

  Aggregate functions will bring together data that is to sum or count etc once it is grouped together. It is not just review, but grouping.
  Analytical functions review / analyze the other rows of data, without having to group them in the result that they can summarize a set of values of a particular group (partition) of the data, or they can simply retrieve values of other lines (for example lead, lag, the first_value, last_value etc. functions.) They are able to look through the data without any aggregation of it. So why they are analytical.

• How can I copy all the 18 000 pictures on my imac to an external hard drive to give to my daughter and also keep on the imac

  How can I copy all the 18 000 pictures on my imac to an external hard drive to give to my daughter and keep them all on my imac

  Your daughter have a Mac and use Photos? If so just copy your library of Photos to SMT, it must be formatted OS X Extended (journaled) with the defined property is ignored. Then she can use the SMT library or copy it on his Mac.

  If she doesn't have a Mac do the following:

  1 - Create a new folder on the external drive.

  2 - Select all photos in the library (in the window of Photos).

  3. Select the file ➙ ➙ export export Original unmodified for XXXXX items menu option.

  

  4. in the format of subfolder select Export window = name of the time

  

  5. in the next window, select the folder that you created on the external drive as the destination of export and export all your photos to this. Photos at every moment in your photo library will be put in a folder with the date of that moment and this issue will be put on the EHD in the folder that you created.