Cannot access 5.3 ACS installed in a virtual machine

Similar Questions

• Cannot access the windows service install

  Initial Setup error title: windows
  I'm unable to download the latest version of java as well as the updates of windows and the reason given was that "cannot access the windows service install" Pls advise

  Hello

  What happens when you try to perform windows updates?

  Check the status of the Windows Installer service and make sure that it is started

  Method 1:
  Start the Windows Installer service
  a. Click Start, type Services.msc and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.

  Unregister and register the Windows Setup program again
  Method 2:

  Unsubscribe and re - register the Windows Installer to do this follow the steps below.

  a. Click Start, click Run, type MSIEXEC /Unregister. and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, click Run, type MSIEXEC/REGSERVER and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass. After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.

  Method 3:
  You can follow the steps in knowledge base article and check:
  Problems installing and uninstalling programs on Windows computers
  http://support.Microsoft.com/kb/2438651

• Message indicates, this program requires Windows 2000 or greater must be installed in this virtual machine.

  Trying to install a new program and keep this exact error message: "implemented cannot continue." This program requires Windows 2000 or higher installed in this virtual machine. "I have Windows XP, which is higher than 2000, and I do not know how to proceed.

  It is possible that you need XP Pro (not XP Home) installed on your home desktop. You should contact VMWare technical support for this issue. You might be interested in this forum, too:

  http://communities.VMware.com/community/VMTN/desktop/view?view=discussions

  Good luck.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• A new system with a clean install of Win 7 64 bit Pro. Try to install win XP virtual machine.

  A new system with a clean install of Win 7 64 bit Pro.  Try to install win XP virtual machine. The virtual machine "put" file installs and then restarts.  During the configuration phase it reboots it gets 94% done gives a message 'update failed' and said that no files have been modified.  I redownlaoded the file and reinstalled several times.  I changed the bios to make sure that hardware virtualization is enabled.  All tests that microsft has said that my Machine is fine.  However I can not get the software\update of the virtual machine in order to install properly.  Any thoughts?  Thanks in advance.  Bruce

  Hi Bruce,.

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

   

  Hope this information helps.

• Cisco Works VMS 2.3 can be installed on a virtual machine?

  Hello everyone:

  Can Cisco works VMS 2.3 be installed on a virtual machine or can be migrated from a physical server to a virtual server?

  His support?

  Thanks for the reply...

  Yes, I have installed VM 2.2, 2.3 and™ 4.0, x 4.5 and 5.0 on VM workstation 5 and 5.5. Not familiar with the migration.

  Tom

• can OEM 12 c installed on the virtual machines?

  I checked the oracle about the 12 c OEM documentation and seems doesn't not accurate if we can use the virtual machines or not. But because so many components have to be installed and configured, I would like to know if anyone knows this here.
  
  Thanks in advance.

  Yes OEM12c can be installed on the virtual machines.

  You can also see URL below for more details

  https://Apex.Oracle.com/pls/Apex/f?p=44785:24:0:no:24:P24_CONTENT_ID, P24_PREV_PAGE:6432, 2

• Can I access the guest from the server OS (virtual machine)?

  Hi all

  Can I access the guest from the server OS (virtual machine)? I mean, I would also like to start and discovers a guest OS (VM) directly in the server as in VMware Server 2.0. I would also like to see the graphic on the server management console to manage virtual machines.

  Or do I always have at least two computers? For example, the server ESXi without GUI / frontend access and the client with vCenter, vInfrastructure, blah-blah-blah,...?

  Thanks for the replies!

  Best regards

  Joao Araujo

  You will need the Client or another tool for access (RDP, SSH) a machine separate. ESXi is a very tiny BONES.

• Oracle installed on the virtual machine

  Hello world!
  
  In one of the server, Oracle is installed on a virtual machine.
  
  I have to make a change in the way I set up the file settings or something else to improve performance?
  
  What a difference, is to have the Oracle in the area directly compared to what in the virtual machine?
  
  Hope to hear some tips.
  
  Thank you. :)
  
  Nith

  user645399 wrote:
  Hello world!

  In one of the server, Oracle is installed on a virtual machine.

  I have to make a change in the way I set up the file settings or something else to improve performance?

  What a difference, is to have the Oracle in the area directly compared to what in the virtual machine?

  There is no difference running Oracle in a virtualized environment or on a box. For the performance gain, the same number of steps are necessary as normally are required. Read the guide to performance optimization of Oracle doc site corresponding to your version of db http://tahiti.oracle.com.

  HTH
  Aman...

• Is it possible to use the box that esxi is installed as a virtual machine?

  I have correctly installed ESXi and established virtual machines using the VI Client. The virtual machines are installed with the operating system and on balance, everything works as advertised.

  PC, access the box of ESXi are far enough away from the real server. Is it possible to have a vm residing with the box of ESXi machine on ESXi box?

  Any help will be greatly appreciated. This is new territory for me.

  Ken

  Hey Ken. Good job getting everything setup and operation. Unfortunately you cannot 'see' a guest of the ESXi server. I suggest you bring a laptop with you on the server.

  If you have found the following information useful please consider giving points and or the marker said.

  See you soon

  Kevin

• VCenter Server installed as a virtual machine within a ESXi servers it manages?

  Hi all.  I'm new in the world of VSphere... still in my evaluation period.

  I have only a single ESXi server running at the moment but plans to add a second later for high availability, vmotion, increase general capacity, etc.  They are / will be ESXi running on the internal storage and the virtual machines running on a shared SAN.

  Today, I installed VCenter Server 4 on a server at bottom of range/Office that I was carrying around running XP Pro x 64.

  As I was installing I read the guide installation and to my surprise, it seems to recommend that I have installed VCenter Server 4 as a virtual machine on my ESXi host.

  Now maybe I just spent too much time setting up my without new Lefthand requiring a 'witness' during the failover of one SAN to another... but I was under the impression that VCenter Server is not designed simply to host configuration, but is also designed to act as a 'witness' or to take account of quorum whenever a failure scenario occurred on one of my ESXi hosts.  I also noticed the VCenter Server features of a port "heartbeat", which I suppose one would use for the ESXi server heartbeat, but perhaps it is used for "connected mode" with other VCenter servers (I was intending to use only one since it is a small scale installation) I also felt that it would be useful enough to restore a damaged or shot ESXi host.

  So my question is, if my ESXi host dies and it is where I have VCenter Server installed, then high availability will be unable to work?  I guess there are going to be other issues with me unable to access VCenter Server while I have an ESXi host shot, too, as a greater difficulty to get the ESXi up?

  Maybe I'm wrong understand the purpose of the VCenter server... maybe it's not something that's necessary for HA, recovery, etc. and acts only as a configuration tool until something is wrong?  Or maybe I misunderstood the installation guide and they recommend only installing VCenter Server on an ESX box... they don't want this ESX box to be part of the group that manages the server?

  Finally, if indeed they recommend I install this on a ESXi host manages... would I ideally be install this for local storage on the server (where I installed ESXi) or on the SAN (where all my other virtual machines are installed)... or is it just personal preference?

  Thank you!!

  When you add hosts an active hemagglutinin vCenter cluster HA agent is installed on it.  This agent is what is actually the HA.  While necessary to add new hosts in a cluster and configure some specific parameters of vCenter vCenter's agents HA are self-sufficient and can handle HA failover so vCenter is offline.

  You must install the vCenter VM on SAN storage, so that he can use the vMotion, sVmotion, DRS, HA, functions etc. that require a SAN.

  -MattG

  If you find this information useful, please give points to "correct" or "useful".

• How can I access all of my local readers of Virtual Machine

  Hello... IAM a newbie here and just installed VMware Server 2.0.1 on my windows xp (laptop). Guest operating system is Windows Server 2003. I have 3 partitions in my host. That is, C, D, E drives.

  I installed VMware server on C:\.  What is the problem how can access all my local drives on the host of the virtual machine operating system.   (I can only access the Virtual Machine's hard drive).

  Could you please help me in this issue...

  Thank you and best regards,

  Indianmale...

  use of the network / sharing on your file systems

  Please reward points - we must know if we helped.

• Install the new virtual machine as a guest of the installation of boot CD

  Hello

  HOWTO install new virtual machine as a guest of the boot installation CD?

  first of all can I mount the CD drive?

  Best way to do is to download the CD image on your server ESX with WinSCP or FastSCP.

  Connect the cd player to the guest for this ISO image and make sure that the option "Connect to PowerOn" is selected.

  If you hav access your esx host you can also insert the cd in the CD drive, ESX host and connect the guest to the host drive. Check the option "connect to PowerOn.

  Start your virtual machine and it should start from CD.

  Arnim - van Lieshout

  -

• Install Vista as virtual machine

  
  

  • I recently bought a complete sales of Windows 7 install Microsoft. Is it possible to install this on my Toshiba and legally install Vista (currently installed in Toshiba OS system) as a virtual machine. I guess that since Vista provided with the laptop (no drive included), it can not remove and reinstall as a virtual machine, but any advice would be appreciated. Thank you

  I would say no, for two reasons.  First of all, the copy of Vista is allowed to the original computer, not to a virtual machine; Secondly, because it is an OEM copy and probably in the form of system restore disks, there quite probably locked to the BIOS of the original machine and the virtual machine does not contain the correct ID so it doesn't settle not in any case.

  writing in the new message: * e-mail address is removed from the privacy... *

  *
  *

  * I recently bought a complete sales of Windows 7 install Microsoft. Is it possible to install this on my Toshiba and legally install Vista (currently installed in Toshiba OS system) as a virtual machine. I guess that since Vista provided with the laptop (no drive included), it can not remove and reinstall as a virtual machine, but any advice would be appreciated. Thank you

• How to download Windows 7 COA diskless and install on a virtual machine?

  How to download Windows 7 COA diskless and install it in the Virtual Machine?
  Thank you
  Emmanuel

  Hi EmmanuelBoutboul1,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.