cannot configure WPS54G that worked

Similar Questions

• Cannot configure FolderLink that cannot find the button options to connect... How?

  I'm here at the top of the Firefox window, "click the Firefox button click Options
  Click the menu button, then choose Options
  Click the attachments button, and then click Outbound. "
  'Options' is not an option that I can find.
  Whaat? Doo... Do next?

  For Thunderbird, click Tools(press F10 or alt to the unhide) > > Options > > Attachments > > outbound tab and click the Add button

• Receive error message: ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."

  Internet connection xp

  I am running windows xp sp3 on my laptop. After a restart of the internet connection (wireless failed). try to connect to the wireless network has this error
  ": windows cannot configure this wireless connection if you have enabled another program to configure this wireless connection, use that software."
  It's a toshiba n205.  When I right click on the wireless network printer it says that it is the firewall disabled. so I'm going to allow it and it still does not work. I don't understand because it seems that the firewall was working aok before restarting. I change all of the settings.

  I solved this problem by changing the setting to allow windows to establish the network connection, I guess it is made by toshiba software. If anyone knows WHY this would be the case, why all of a sudden we would lose the connection, would be useful.

• I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

  I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

  Modem... doing and... model number you have?

  What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

• When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network.

  Unable to connect because of firewall or something, not true of course

  When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps:

  Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless

  http://support.Microsoft.com/kb/871122

  Also read these articles and check:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/870702/en-us?p=1

• Wireless Auto configuration does not work after that manual set up

  Wireless Zero Configuration (WZC) stopped working on my computer at random.  I went online found some resources how to click Run, put in a formula and get it up and running again. It worked... once. When I turned off my computer and turned it back the next day, WZC did not work again, so I went through the whole process, once again, but now it doesn't work at all. I guess I should just uninstall and reinstall the Configuration automatic service, but I assure you that I do things. Can someone help me if I can do my work on my computer again? Thank you

  Yes, it's the process that I have lived, more than 15 times.  When you make my hours of searching, he had 3 different codes to use when using:

  Start > run

  1 %SystemRoot%\system32\services.msc/s

  2 ncpa.cpl

  3, sysdm.cpl

  Regarding the third party... my laptop is very old, but I took good care of her. This issue is literally something that started when I turned it on.  Wi - Fi, I have a "Broadcom" symbol (which was always there) in my quick launch.  Other than that there is no component of third-party wireless known on my computer.

  The command symbol Broadcom wireless utility IS a third party.  Although you can have the icon in the notification area since you had the computer, it must have been turned off and is now activated.  Either click or right-click on the icon of Broadcom and see if you can find a section 'options' or 'preferences' which will allow you to disable for Windows order your wireless card.

• configuration of keys portable keyboard is messed up after using a keyboard external usb that works perfectly

  After using an external keyboard usb that works perfectly portable configuration key is all messed up how can solve the problem of the external

  IW working keyboard laptop does not help please

  problem solved, when I restarted the laptop the keyboard had the NumLock key and somehow it confused laptops keyboard

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• En5.1: Cannot create a DVD disc or DVD folder, but can create a Flash version that works according to the needs.

  Yet 5.1 cannot create a DVD disc or DVD folder, but can create a Flash version, including a Manger Menu HD & HD submenu nursery that works as required.

  The script contains two M2v with AVI files associated files.

  An anomaly, when rendering > motion menu is executed, the Menu made progress has elapsed time: indicator checking the time, but nothing happens. I cancelled the progress to return after 8 minutes window.

  The Flash version works fine. How should I proceed with the DVD disc or DVD folder versions?

  two M2v file with the associated AVI files.

  Do you mean associated wav files?

  M2v files show that "do not transcode" for DVD transcoding status?

  What happens when you try to build on the record?

• Some CDs that work perfectly well in a CD player, cannot be read by my computer, while other CDs work perfectly fine. Why? How can I solve?

  Why did make some CD work perfectly fine in my computer and others that work perfectly well in a CD player, no? It's frustrating. I'm trying to import using iTunes. The computer just tells me to insert a CD. All the answers?

  Hello

   
  1. What is the brand and model of the computer?

  2. do you have a third-party software installed on the computer of engraving?

  I suggest you to insert the CD in a different computer and check.
   
  Method 1:
  a. remove the CD/DVD media and check for scratches, cracks, or stains that can make the CD/DVD hard to read, so the support is scratched or cracked, you must enter a filter replacement.
   
  b. If the DVD is dirty or stained, clean the CD/DVD with hot water and a soft cloth.
   
  c. ensure that the DVD is clean and completely dry before re - insert in the CD/DVD drive.
   
  d. restart the computer and press a key when you are prompted, and start the installation.
  Method 2:
  Run the Fixit described in the article:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
   
  Method 3:
   
  Perform the steps described in the article:
  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052
   
  I hope this helps.

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• "Windows cannot configure this wireless connection".

  I (birthday gift) a laptop Dell Inspiron 1011 with Windows XP Home Edition.  It has a "Dell Wireless 1397 WLAN Mini Card".  It works wirelessly at home but when far and try using WiFi access points, if I am looking for available networks, it comes up with "Windows cannot configure this wireless connection".  (She also comes up with this message at home if I search for the network, but works OK on everything that I established House).  I searched online and found a "fix" of Microsoft, but when I tried to use a time warning that "this type of file can harm my computer" so I gave up.

  Another area, I looked explained that the software other than Windows ensured control WiFi and it was not recommended to disable it.  (No doubt, it was the Dell software?)

  I'm very PC not literate and would appreciate any help very simple!

  Hi sligo123

  You can find this a bit confusing link.  I suggest that you enable the automatic configuration service (service Windows uses to control the wireless, rather than the Dell software).  Heres how:

  1. click on start, then run

  2. in the box, type C:/Windows\system32\services.msc/s

  3. click on OK

  4. in the window that appears, you should have a full range of services, scroll down until you find Windows Zero Configuration - double click on it

  5. in the box, make sure that the automatic option is selected in the drop-down list box.  Then click on the Start button.

  Try and then try to connect to the wireless network (you may have to connect to your home network)

  If this does not help, please post back here and we can try something else.

  Kind regards

  Daniel

  Profession: IT Administator for a small UK company | Level of Expertise: intermediate (self-taught)

• Installed wireless Belkin, unable to see network, get error windows cannot configure this wireless connection and starting the WZC abuse

  Hello

  I have a belkin wireless router that worked on my primary computer and a portable computer for years.

  Recently, I moved my main computer and now it dosnt seem to work. Belkin is installed but when I ask to see available networks, it says that windows cannot configure this wireless connection and starting the WZC abuse. Belkin still works fine on my laptop so I know no there is not a problem here. Can someone help me please? I tried to type in %SystemRoot%\system32\services.mcs\s as with a question of people, but all I get is windows can't find this.

  Any ideas please?

  Thank you

  * original title - Help... problem with belkin wireless *.

  Let's see if I can cut through it.

  You wrote:

  Click the Wireless Networks (see this picture) - I did

  Is the box 'Use Windows to configure my wireless network' checked or unchecked? There is no such box.

  I connect using - he says belkin. another box saying this connection uses the following items. then underneath there are 3 tabs - install, uninstall and properties. If I press on properties it says name provider and in this box, it says windows index.

  It seems that you don't have not clicked the "Wireless networks" tab, after you open the properties of your wireless adapter.  From your description, you look at the 'Général' tab: click HERE to see the "Général" tab Click HERE to see the 'Wireless Networks' tab.

  There are 5 columns: name, description, status, startup type and log as.  The values for the last 3 columns should be started, automatic and Local System - on my screen there are 4 tabs at the top - general, connect you, recovery and dependency.

  You skipped a step... 5 columns are in the 'Services' window initial... you arrive at "4 tabs at the top", AFTER you double-click the Wireless Auto Configuration.

  Status of the service which includes 4 boxes. stop suspend and resume. the button highlighted in the start menu

  Just to the right of the expression "Service status", you should see a Word.  On your system, this word probably is "stopped."  The 4 buttons (boxes) are how to control the service.  Because you said that the highlighted button is 'start' which means that the service is currently stopped, and you will need to click on this button "start" to start.

  I strongly suspect that you had used the Belkin utility to control your adapter - and now, you also started WZC.  As I wrote above, you can have both running at the same time.

  When you click the icon of your "Belkin", do you have a screen that looks like this: http://www.wi-fiplanet.com/img/2006/belkinn1/08.jpg

  If so, you should return to the utility Services and 'Stop' the automatic configuration service.  If you want to use WZC instead of the Belkin utility, see http://en-us-support.belkin.com/app/answers/detail/a_id/40/related/1

  I'm not familiar with the Belkin Wireless networking utility, but many wifi manufacturer utilities can be used to turn your wifi on and off, then maybe your was off (the adapter on your computer - not the router).  If you identify the model of the card you have in your main computer, I'll see if I can find the manual on the Belkin website and maybe give you a little more information.

• Home Premium 64 bit Ultimum 64-bit upgrade fails during execution. Error message: Windows cannot configure some components

  Upgrade problems. Home Premium 64-bit to 64-bit Ultimum.

  
  
  I tried several times to upgrade Vista Home Premium 64-bit Vista Ultimate 64-bit. It ends at until the end, but when it restarts, it says windows cannot configure some components and starts a restoration to Home Premium. So frustrating. Any help would be appreciated.

  Both Home Premium and Ultimate out of support in two months.  One company will receive technical support from Microsoft (security patches, etc.) after April.  Here is the political Support of Vista page.  'Not applicable' entries in the column of Extended Support mean that this edition is not eligible for updates, including critical security updates, after the end of standard support on April 10, 2012.

  http://support.Microsoft.com/lifecycle/search/?sort=PN&Alpha=Windows+Vista

  If you can, return your ultimate and buy business.  I realize that copies of business are becoming difficult to find.  Another option is to upgrade to Windows 7.  I suggest professional since Ultimate offer very little more than Pro (just the Bitlocker and multilingual support) and is also not intended for extended support after Windows 7 standard support ends after 2014.  Professional will extend support through 2019.

  Having said all this, I also had problems using the update with Vista installation option.  In many cases I resorted to the use of the custom installation option.  That does not work, but of course this means using Windows Easy Transfer to save your files and settings and reinstall your programs.  What I eventually learned with Vista upgrade can take all day even when all goes well, then there is not much time saved during a custom installation followed in any case of reinstalling the software.

  One thing you can try is to completely remove your anti-malware software.  Just turning it off is not enough because some antivirus programs install a watchdog on the part of the registry.  If something prevents the writing of registry entries at the end of the upgrade you so you would get a rollback.

• Game-VMGuestNetworkInterface: A positional parameter cannot be found that accepts arguments '$null '.

  Hello guys,.

  I'm trying to run a script that will remove the information (name, IP address, gateway & port group VM) from a CSV file and change the network settings on the different virtual machines.

  I have looked everywhere and tried various changes to make it work, but I have had no luck yet. For the moment, it gives this error;

  Game-VMGuestNetworkInterface: A positional parameter cannot be found that accepts arguments '$null '.

  What I use and the release of PowerGUI is attached. The scenario is based on this link.

  Any information will be helpful. I'm at my wits end.

  Thank you

  While not solving your problem, it's probably worth noting that Set-VMGuestNetworkInterface should be deprecated in the next version of PowerCLI as described here announcement: future Cmdlet Deprecation. VMware PowerCLI Blog - Articles VMware.

  I have provided an alternative to the above to configure the IPv4 address details and parameters of the DNS server for the network interface of comments on a Microsoft Windows OS by using the combination of the new-NetIPAddress, Set-DNSClientServerAddress and the network interface of comments Invoke cmdlets VMScript- change with the Invoke-VMScript cmdlet. Deans blog.

  The article above on the amortization of the cmdlet, also other alternatives for the text of the script to call using Invoke-VMScript cmdlet agaisnt systems provides.