Cannot convert java.io.serialiazable to int error

Similar Questions

• Cannot convert Server 2008 R2 Machine get error: Instant The VSS cannot be stored, because there is not enough space on the source volumes or because the source computer does not all NTFS volumes. Error code: 2147754783 (0x8004231F).

  I have a couple of server 08 R2 machines where the P to V conversion fails.  I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space.  Conversion fails with the error below.

  VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
  2147754783 (0x8004231F).

  
  

  Someone had this problem and came to the top with a solution or to get around?
  

  
  

  Thanks in advance
  

  Guessed it.  My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it.  My servers now converted without any problem.

  1. Open disk management.
  2. Look at the partition of the PRS and see if it is 100% full.
     • If Yes, proceed to step 3.
     • If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
  3. Click a drive, select properties and then select the instant snapshots tab.
  4. Ensure that all shadow copies are disabled and no limit on all players.
  5. Go to the partition of the SRP and assign the B:drive letter.
  6. Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
  7. Right-click the System Volume Information folder, and then select Properties.
  8. On the Security tab, click Edit, and then add the group with full control everyone in the folder.
  9. Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
     • B:
     • B:\>FLTMC UNLOAD AAFSFLT
  10. Navigate to the System Volume Information folder, and then type the following commands:
      • B:\>CD System Volume Information
      • B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
      • B:\System Volume Information > CD\
      • B:\>FLTMC LOAD AAFSFLT
  11. Close the command prompt window.
  12. In Windows, right click on the reserve system folder and remove the Group everyone.
  13. In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).

• Cannot convert abcd of the type class java.lang.String interface java.util.List

  Hello

  I get an error of "cannot convert the class type abcd java.lang.String interface java.util.List" where "abcd" is a string in a listbox.

  and my code is something like this

  < af:selectOneListbox id = "lstcatg" label = 'List of categories' partialTriggers = 'proud '.

  value = "#{viewScope.RegWoComp.lstboxcatg}" >

  < f: selectItems id = value="#{viewScope.RegWoComp.customList}"/ "lstselect1" >

  < / af:selectOneListbox >

  
  bean

  private list < String > lstboxcatg;

  {} public void setLstboxcatg (List < String > lstboxcatg)

  This.lstboxcatg = lstboxcatg;

  }

  public List < String > getLstboxcatg() {}

  Return lstboxcatg;

  }

  public BindingContainer {} getBindings()

  Return BindingContext.getCurrent () .getCurrentBindingsEntry ();

  }

  Private Sub button (ActionEvent actionEvent)

  {
  JUCtrlListBinding listBindings = (JUCtrlListBinding) getBindings () .get (lstboxcatg);
  Object [] str = listBindings.getSelectedValues ();

  for (int i = 0; i < str.length; i ++)

  {

  System.out.println (STR [i]);

  }
  }

  I tried to use this fact.

  object str = listBindings.getSelectedValue ();

  System.out.println (STR);

  and here, if I change the data type of lstBoxcatg

  private String lstboxcatg;

  {} public void setLstboxcatg (String lstboxcatg)

  This.lstboxcatg = lstboxcatg;

  }

  public String getLstboxcatg() {}

  Return lstboxcatg;

  }

  can I get a nullpointerexception on line object str = listBindings.getSelectedValue ();

  No you can use this code you don't use link layer

  remove this code. You will get the selected value in this string variable

  Just write this about you button action and verification.

  System.out.println (selectedVal);

  Ashish

• Cannot convert RichInputNumberSlider to int

  Hi all
  I have tried the panelDashboard component.
  I want to make a simple page with two components: an inputNumberSlider and a panelDashboard.
  I would like that the panelDashboard has the number of columns selected in the inputNumberSlider.
  
  I read the post of thi: < af:panelDashboard > component not made
  so I put in the "columns" of the panelDashboard of the value property: #{backingBeanScope.ins1.value}
  
  but I have this error:
  
  java.lang.IllegalArgumentException: cannot convert RichInputNumberSlider [UIXEditableFacesBeanImpl, id = ins1] of type class oracle.adf.view.rich.component.rich.input.RichInputNumberSlider in int
  at com.sun.el.lang.ELSupport.coerceToNumber(ELSupport.java:293)
  at com.sun.el.lang.ELSupport.coerceToType(ELSupport.java:373)
  at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:194)
  at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:68)
  at oracle.adfinternal.view.faces.renderkit.rich.PanelDashboardRenderer.getColumns(PanelDashboardRenderer.java:384)
  Truncated. check the log file full stacktrace
  
  I want to convert to int, because if I set the 'columns' property # {backingBeanScope.ins1.value} without converting them, I do not see the panelDashboard.
  
  Why?
  
  I use Jdeveloper 11.1.1.0

  I do something similar. In my grain of support for dashboard, I just have a property of type string called 'prefNumCols' with the getters and setters.

  Then the dashboard is refers to this value simply and watches the foregoing as a partialTrigger

  Works for me :-)

  Published by: cafelatte, Sep 22, 2009 15:24

• Cannot convert oracle.jbo.domain.Number to class the class java.lang.Long in EL

  I have this error:

  ViewId treatment < UIXRegion > < _warn > error: / frameworks-designer-task-flow/hand URI: FrameworksDesignerMain.jsff real-URI: EnterpriseProcessExecutionSchedules.jsff.

  java.lang.IllegalArgumentException: cannot convert 2 type class to class java.lang.Long oracle.jbo.domain.Number

  at com.sun.el.lang.ELSupport.coerceToNumber (unknown Source)

  at com.sun.el.lang.ELSupport.equals (unknown Source)

  at com.sun.el.parser.AstNotEqual.getValue (unknown Source)

  at com.sun.el.ValueExpressionImpl.getValue (unknown Source)

  at org.apache.myfaces.trinidad.bean.FacesBeanImpl.getProperty(FacesBeanImpl.java:73)

  to oracle.adfinternal.view.faces.renderkit.rich. LabeledInputRenderer.isDisabled (LabeledInputRenderer.java:285)

  My question is how do I find in my page jsff?  I see that it is on a property of disabled but I don't know which and there are many on this page.  I think it's one that looks like this: disabled = ' #{bindings. " "{PGSchedType.inputValue No 5}.  If my different EL expression?

  Thank you.

  Rudy

  JDev 11.1.2.4.0

  Hi Rudy,.

  I guess that you have spotted it right. Instead of 5 in your disabled property, use '5'

  
  

  I mean, just surround it with quotes like below
  

  
  

  disabled="#{bindings.PGSchedType.inputValue ne '5'}"
  

  Thank you

  SAIF

• Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea

  Hi guys

  I dynamically add new linebreaks in my arraycollections. The first text box fits in the table, but in the second text box is inserted into the table I get the error in the title of this thread. Code below:

  TypeError: Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea.
  to test2 / getDocObj () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:82]
  to test2 / checkLength () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:42]

  private void checkLength(event:KeyboardEvent):void
  {
  var textArea:TextArea = new TextArea();
  textArea = getDocObj (event.currentTarget.id); -Error begins here.
  doc. Text = event.currentTarget.id;
  
  If (event.keyCode == 8 & & textArea.length == 0) {}
  removeChildTextArea (textArea, event.currentTarget.id);
  documentPage.setFocus ();
  }
  Else if (event.keyCode == 8 & & (documentPage.height - documentPage.mx_internal::getTextField () .height) < = (documentPage.height - documentPage.textHeight)) {}
  documentPage.setFocus ();
  }
  ElseIf (textArea.height - textArea.mx_internal::getTextField () .height > = textArea.height - textArea.textHeight) {}
  create new textarea
  var newtextArea:DocumentTextArea = new DocumentTextArea();
  documentContainer.addChild (newtextArea.getTextArea ());
  newtextArea.getTextArea () .setFocus ();
  newtextArea.getTextArea () .addEventListener (KeyboardEvent.KEY_UP, checkLength);
  documentArray.addItem (textArea);
  
  if(documentArray.Length == 0) {}
  newtextArea.getTextArea () = (0) user.user m:System.NET.SocketAddress.ToString ();
  }
  else {}
  documentPointer += 1;
  newtextArea.getTextArea (user.user = documentPointer.toString ());
  }
  }
  }

  private void getDocObj(id:int):TextArea
  {
  trace ("size of table '+ documentArray.length +' and the size of the id is"+ (id) m:System.NET.SocketAddress.ToString () ");
  var findTextArea:DocumentTextArea = DocumentTextArea (documentArray.getItemAt ((id)));
  Return findTextArea.getTextArea ();
  }

  You try to get a TextArea to this DocumentTextArea, it is the problem, why you do not change this line

   var textArea:TextArea = new TextArea();
  

  To do this:

   var textArea:DocumentTextArea= new DocumentTextArea();
  

• error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'__Code: UNICOD problem__ MapiMessage message; __message.lpszSubject = _T ("International Translation package Attached"); Error at this stage. ___

  Project is in UNICODE format in VC6.0 MFC on windows XP

  error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'
  Code:

  MapiMessage message;
  message.lpszSubject = _T ("International Translation package Attached"); Error at this stage.

  I would know how can I use MapiMessgae in my program using Unicode.

  Suggest me any change in

  Thank you and best regards,

  Sanjay.

  Hello Sanjay

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/vsexpress

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot convert native table error

  I try to run the following code to the will a bunch of VmfsVolumes:

  var specs = new Array();
  for each (var unres in unresolved)
  {
    var resolutionSpec = new VcHostUnresolvedVmfsResignatureSpec([unres]);
    specs.push(resolutionSpec);
  }
  
  
  var unresVmfsResults = u_host.configManager.storageSystem.resolveMultipleUnresolvedVmfsVolumes(specs);
  for each (var res in unresVmfsResults)
  {
    System.log(res.vmfs.name);
    System.log(res.fault.localizedMessage);
  }
  
  

  I get this error message:

  Cannot convert org.mozilla.javascript.NativeArray@53a11a66 to [com.vmware.vim.vi4.HostUnresolvedVmfsResolutionSpec]

  
  

  I have no idea how to do to create a strongly typed array in Javascript, and I'm not even sure its possible.  Anyone know how to get around this problem?  I tried to use the form var = [];  I also tried to feed the first resolutionSpec in manually as: form var = [resolutionSpec].

  
  

  form var = new Array(); and form var = []; are roughly equivalent.

  What is the content of the unresolved variable that you iterate in the first loop?

  An obvious error is that resolveMultipleUnresolvedVmfsVolumes() accepts an array of VcHostUnresolvedVmfsResolutionSpec, but you claim with VcHostUnresolvedVmfsResignatureSpectable.

  Also, you are passing [unres] as an argument in the constructor, but according to the API Explorer this constructor has no arguments. Instead, you need to instantiate the script using its constructor with no arguments object and then just set its properties.

• Embedding a SWF Movieclip gives the error: "cannot convert box_swf to flash.display.MovieClip.

  Hello, I am getting a weird error on a very simple code.

  I have a swf containing a clip with the Linkage name "Box". The movieclip has an animation of 30 images, still Flash Builder keeps mistake saying: this isn't a clip!

  SerializableAttribute public class Main extends Sprite

  {

  [Embed (source = "... / assets/box.swf", symbol = "Box")] public static A_Box: Class const;

  public void Main()

  {

  var box: MovieClip = new A_Box();

  }

  }

  #1034: constraint type failed: cannot convert box_swf$161b93e3bc30cfa0cb18e1d734943c6f-1063626660@53720a1 to flash.display.MovieClip.

  If I try to bring it as a leprechaun, it works very well (var box: Sprite = new A_Box();), but then it does not animate, because it is considered as a sprite.

  I looked around 20 examples online, the code is very simple and I can't seem to find anything wrong with my code. I also rechecked 300

  time and the Movieclip is correctly set up inside the Swf. (name of the link, several frames, export for actionscript Framework 1, etc.)

  Then... Why does is not the only work of Sprite and MovieClip?

  I'm doing something wrong or is this maybe a problem of FlashBuilder/Air13.0?

  Thank you!

  I opened my project again today to see if it suddenly works perfectly... Something must have been in cache because I got hurt with her for six hours yesterday, and now without changing it works immediately the bat.

  I find that there are problems cache as such in FB. Sometimes the changes I have made do not appear in the project at all (including the removal of the top classes) until I restart FB. Really wish that Adobe get their act together and release a patch to fix some of the bugs all.

• How to print after the Error Msg: cannot convert the postscript file

  "Maverick", we installed our MacBook Pro and our printer is a HP 8600.  We have failed to get our Adobe Acrobat Professional 8 to print our PDF files.  Instead, we got the error msg: impression: cannot convert the postscript file.  We have used this application for years without any problem.  How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?

  I think that we have solved the problem.  Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600.  We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro.  After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.

• TypeError: Error #1034: Type coercion failed: cannot convert flash.display::MovieClip@64e6ca1 in fla

  Hi all

  I get this window pop-out error when I pressed a button. The earpiece button contains the following code:

  btn_start.addEventListener(MouseEvent.CLICK, gotoStart);
  function gotoStart(e:MouseEvent):void{ 
       btn_start.removeEventListener(MouseEvent.CLICK, gotoStart);
       gotoAndStop("START");
  }
  

  TypeError: Error #1034: Type ISP led constraint: cannot convert flash.display::MovieClip@64e6ca1 to flash.display.SimpleButton

  at flash.display::MovieClip/gotoAndStop()

  to attendanceCheck / gotoStart () [attendanceCheck::frame2:31]

  After searching the cause for a while, I can't find what's wrong with it...

  Help me please...

  Thank you

  Zainuu

  As I said, there is nothing wrong with this code.  So, since the error indicates that you treat a MovieClip, as if it were a SimpleButton control, somewhere in your design you have done something to try to force this MovieClip to be a button (or possibly vice versa if it's actually a button).  Check the properties panel and elsewhere to see if you have something that could be tempting to be that touches another object type than it is selected.

  Try to create a new movieclip and assign it to that name (detached from each other) and see if you still receive the error.  If it works, then I recommend just create a new movieclip and replace the current where the problem arose.

• DateField as itemrender causes Error #1034: Type coercion failed: cannot convert '10/03/2006.

  I have itemrende onliner.

  < mx:DataGridColumn dataField = "solddate."
  headerText = "Date".
  itemRenderer = "mx.controls.DateField"
  rendererIsEditor = "true".
  editorDataField = "selectedDate" / >

  XML =

  < solddate > 10/03/2006 < / solddate >

  This translates

  DateField as itemrender causes Error #1034: Type coercion failed: cannot convert ' 10/03/2006' in Date.

  Is it possible for me to be

  1. change the output xml to the required format

  or

  2 convert the data within the itemrenderer

  The answer is here http://blog.flexmonkeypatches.com/2008/04/08/datefield-itemeditor-when-date-is-a-string/comment-page-1/
  
  or you can do it inline like
  
  DataGridColumn headerText="Date"                   editable="true"                    rendererIsEditor="true">                              DateField selectedDate="{new Date(Date.parse(data.@solddate as String))}"/>                                               DataGridColumn>
  
  
  

• Cannot convert * of type class oracle.jbo.uicli.binding.JUFormBinding

  Hello
  Excuse my approach... but I can't... I haven't used this during some time... and I took this to an old APP (working!)
  the error is:
  Cannot convert * of type class oracle.jbo.uicli.binding.JUFormBinding to the oracle.adf.model.BindingContainer interface
  
  and the code is like this

  DCBindingContainer dc = (DCBindingContainer)((fc.getApplication().evaluateExpressionGet(fc,"#{bindings}", BindingContainer.class));

  I watched JUFormBinding and as I see the hierarchy is
  java.lang.Object
  byjava.util.AbstractMap extended
  byoracle.jbo.common.JboAbstractMap extended
  byoracle.adf.model.binding.DCExecutableBinding extended
  byoracle.adf.model.binding.DCBindingContainer extended
  byoracle.jbo.uicli.binding.JUFormBinding extended
  
  so DCBindingContainer is great to JUFormBinding
  
  Thank you
  Pop Florin

  Hello

  and it is easier that it is

  BindingContext bctx = BindingContext.getCurrent();
  BindingContainer bindings = bctx.getCurrentBindingsEntry();
  

  Frank

• Cannot convert 'Double room' to 'double '.

  Update a variable 'amount', including the difficulty is twofold, to a BasicEditField which is a String:

      //Values
      private double amount = 100000;
  
      //Fields for data entry
      private BasicEditField amountField;
  
  amount = Double.valueOf(amountField.getText());
  

  I get this error message: cannot convert from 'Double' to 'double'

  Think that I thought about it:

  amount = Double. parseDouble (amountField.getText ());

• Cannot convert pdf to word

  Has always been able to convert PDF documents to word until today?

  Hi michellem99872918,

  Could if it you please let me know how you convert pdf document to word - in Adobe Reader or via https://cloud.acrobat.com

  You see an error message?

  You are not able to convert a single PDF or all PDFs?

  You can try the steps below:

  Cannot convert PDF to word

  I still cannot convert a pdf file to a word doc.  Need help!

  I'm unable to convert a pdf file to word, I get the error message indicates that it contains XFA forms

  Let me know if it worked.

  Thank you

  Shivam