Windows Update_800B0100, 800F0900, 646 errors for May 2010 updates__

Similar Questions

• Windows Update - Code 646 error?

  Everytime I turn on my laptop, I have a little message that says: I have an update - so I click to install it and it gives me the same error code every time. Error code 646. This update is for security for Microsoft Works 9. The funny thing is, when I turn my laptop libere‑moi said it is necessary to install the update, but how can this be if it does not first place? Does anyone else have this problem?... and if so, how I eliminate it?

  Try this:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/34ad678b-2eb5-4B8B-aeb0-b00e90d6c98c

• Updated 646 error Code to Microsoft Office 2010 Home and Office Edition using the Version Windows 7 Professional 32 - Bit

  I just bought Microsoft Office 2010 & individuals.  I was prompted to install the following updates 9: definition update for Microsoft Office 2010 (KB98726), Microsoft Office 2010 security update (KB2289078), Microsoft Office 2010 security update (KB2289161), update security for Microsoft Publisher 2010 (KB2409055), update security for Microsoft Word 2010 (KB2345000) updated for Microsoft Office 2010 (KB2202188), update for Microsoft Office 2010 Validation of the file (KB2413186) update for Microsoft OneNote 2010 (KB2433299), update for Outlook Social Connector (KB2289116).  I tried several times to install these updates by using Windows Update without success after the resolution of issues of update could not solve the problem.  Is it possible to install these updates on my computer & to receive future updates without more questions?  Extremely frustrating after spending more than $250 for the software.  Help, please!  Thank you.

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

• Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem? ___

  Recently, I installed Microsoft Works 9, and now I have trouble to download the Windows Update update of security for Microsoft Works 9 (KB967044). I am getting error 646. What is a network problem?
  I have also recently set up a wireless network.

  Hello

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps and happy holidays!

  Rob - bicycle - Mark Twain said it is good.

• Error code 646 in windows update update of security for MSXML 4.0 Service Pack 2 (KB954430)

  Lack of this continuous update and when I tried to download it from Windows Center it says error opening installation log file. Verify that the specified log file location exists and is writable. Grateful for any advice, because this is my oldest update and seems to be the origin of the later updates to fail

  http://support.Microsoft.com/kb/2258121/en-AU

  You receive the error code 0 x 80070646 or 646 error code when you try to install Microsoft Office updates

  http://www.Microsoft.com/downloads/en/default.aspx

  Also, try to put the KB numbers in the search at the above link > then download them manually.

  If the above does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon

  Mick Murphy - Microsoft partner

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  Original title: Windows Update

  I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

  The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

  I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

  Operating system is Vista 64 bit.

  After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

• Upgrade Vista to Windows 7 error: "Windows cannot copy files required for installation. The files may be damaged or missing. Error Code Ox80070017.

  I am upgrading of Windows Vista Home Premium (32-bit) for Windows 7 Home Premium (32 bit) - but getting stopped everytime I try, I end up with a dialog box stating: "Windows cannot copy files required for installation. The files may be damaged or missing. Make sure all files required for installation are available, and restart the installation. Error Code Ox80070017.

  What should I do to resolve this problem and allow full of Windows 7 installation? (my computer is a Compaq Presario V6000).

  Hello

  What installation media you are using?

  Method 1:

  Error 0 x 80070017 translates "CRC error" which means that the files that are copied from the disc are not making it to the hard drive with the same structure, which means that the 'original' the disk files are modified/changed/corrupted while being copied to the location of the 'destination' on your disk during Setup.

  This usually means a bad DVD, or an error reading on the DVD player.

  I suggest you follow the link and check.

  Upgrade Windows Vista to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7?T1=tab02

  Method 2:

  Temporarily disable the antivirus on the computer running software and check if you are able to install the software.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  WARNING: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  WARNING: There may be loss of data through an analysis using firewall to eliminate the virus as appropriate

  Method 3:

  I also suggest you to follow the link and check.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows cannot copy files required for installation. The files may be damaged or missing. Error code: 0 x 80070241.

  I had a lot of trouble trying to install the 64-bit version of windows 7 Home Premium on my 64-bit vista, and my question is multi-part. If it is relevant, it's my 2nd copy of windows 7 I have tried. Initially, I had the problem of not being able to run the installation on two copies with the error "'autorun.dll' could not be found or is damaged. Error code is [0x7E]. "However, I managed to get into with my 2nd copy installation after restarting my computer. Once in Setup, I got another error that stopped the installation that says "windows not could create an installation folder. Error code is 0 x 80070017. "Again, I rebooted my computer and started the installation again, this time following installation was decently through but stopped when I got the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. "I then backed up and restarted my computer and then tried to use the option to install custom but then got the error"E:\sources\autorun.dll is not designed to run on windows or it contains an error. Try to install the program using the original media, or contact your system administrator. "coupled with the error"the file 'autorun.dll' could not be loaded or is corrupt. Error code is 0xC1"again once I restarted and tried the custom option but got the error" Windows has no load the required file WinSetup.dll.» The file is possibly corrupted. To install windows, restart the installation. Error code is 0x3E6. "I restarted my computer and tried the custom triple option more and still have the error"Windows cannot copy files required for installation. The files may be damaged or missing. Error code is 0 x 80070241. »

  I understand that my problem is very complex, but it seems to be built around a missing or damaged file. Thanks if you can tell what's wrong or what to do.

  Tips for solving common problems when Windows 7 won't install troubleshooting

  1. start Windows Upgrade Advisor to see if there are known issues that might affect the installation and correct them.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 disable any security software, including anti-virus programs and firewalls.
  3 make sure that your computer has the BIOS and latest drivers.
  4. disconnect all external devices except the keyboard and mouse before installing.
  5. If your computer/motherboard integrated video use and remove the dedicated video card.
  6. If you have a large amount of RAM (memory), try to reduce the amount of RAM installed. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful.
  7. If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  8. check your RAM (memory) to find errors. This can take some time.
  (A) Insert the Windows 7 DVD and restart the computer.
  (B) start from the Windows 7 DVD.
  (C) select your language, and then click Next.
  (D) click on "repair your computer" then select the operating system to fix it.
  (E) click on the link of the Memory Diagnostics in the system recovery menu.
  (F) the computer will restart and your memory is checked for errors.

  9 turn off startup programs:
  (A). Click Start, type MSCONFIG in the search box and press ENTER.
  OK the authorization of user account control and password if necessary
  If you are using XP: click Start, run, and type: MSCONFIG and click OK.
  (B) on the general tab, click Selective startup.
  (C) just below the selective startup, clear the checkbox "Load Startup items".
  (D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
  (E) click OK, and then restart the computer.
  (F) try the upgrade again.

  (NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Original title: Audio recording sound recording microphone

  Hey, if I get this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

  There are several models of m6 ENVY

  ENVY m6 -?

  This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
  This is a link to the HP support site to download drivers

  And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems

  Looks like something to remove the registry entries for the driver

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• When you try to install multiple Windows updates, receive the error code 646

  * original title - Hello, __i am facing a problem with the installation of the updates of the IMP... It is 646.plz for the error code help showing me in their fixation... *.

  updates are
  1 security Update for Microsoft Office Excel 2007 (KB982308)
  2. security Update for Microsoft Office InfoPath 2007 (KB979441)
  3. Update for Microsoft Office PowerPoint 2007 (KB982158)
  4. Update for Microsoft Office Publisher 2007 (KB982124)
  5. Update for Microsoft Office Word 2007 (KB982135)
  6 security Update for Microsoft Office System 2007 (KB982312)
  7 security Update for Microsoft Office System 2007 (KB982331)
  8. Update for the junk e-mail in Outlook 2007 (KB983486) filter

  Add: See: (Guided Help: settings to adjust user account control in Windows 7):
  http://support.microsoft.com/kb/975787/en-us.

  Vista: http://windows.microsoft.com/en-AU/windows-vista/Turn-User-Account-Control-on-or-off

  Disconnected from the internet can help to install the updates.

  TaurArian [MVP] 2005-2010 - Update Services

• Windows 7 could not search for new updates code error C80003FA

  I just activated Windows 7. When I tried to update, I have "Windows 7 could not search for new updates C80003FA error code".

  Tried three times with the same result. Could someone, please?

  C80003FA ReadVerifyFailure - a read verification error occurred.

  1. What is the suite of security/antivirus installed?
  2 is a 3rd party firewall installed?
  3 - is an upgrade to another edition of Windows?

  Please click on the round of departure. In the search field type programs and files in wups2.dll

  Under programs right click wups2.dll and choose Properties, when the Properties window opens, click the Details tab.
  Version of the file and the product should be showing 7.4.7600.226
  Now do the same for c:\windows\system32\wuaueng.dll
  He, too, should show file version and product like 7.4.7600.226
   
  If the version is earlier than that, you will need to install the more recent Version of the Windows Update Agent.
  The easiest way to do this is therefore download and Save the Fixit found here - How to reset the Windows Update components?
  Once the download completes close all open programs and browsers.
  Run MicrosoftFixit50202.msi and choose its default mode.

  BUT, if the installed firewall antivirus/security suite or a 3rd party is causing the "reading check error" then the Fixit may/does not work.
  If this is the case, then Configure the system to boot after download and Save the Fixit.
  Then, run the Fixit after the reboot to clean boot state.
  Restart and Cancel the clean boot steps, restart again to normal Windows mode.
  
  NOTE: in the boot minimum state all the 3rd party firewalls will be disabled. When you run the Fixit either unplug the system from it is the network connection or make sure the native firewall of Windows 7 is now on by opening the control panel > Windows Firewall.

  Expert MowGreen Windows IT Pro - consumer safety

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft