Cannot convert System.Object]

Similar Questions

• DW cannot convert the < object > tag created with swfObject 2

  I have a Flash video on an "integrated" static html page using the swfObject method 2. When I open the page in DW CS3 I get this error message:

  "This page contains < object > tags that may not work properly in the most recent versions of Internet Explorer. DM cannot convert the < object > tag. »

  Page plays the video the two local system on the server.

  this test page is here: http://www.rjdutton.com/about_movSWF2.html

  Relevant source code is:

  --> < object classid =... etc and

  --> < object type =

  Since this is the only code on the test page that refers to an object tag.

  The on-board Flash I have on the website (home page and the who we are page) now are incorporated using < embed > via Flash CS3 (AC_Run active content), but this method does not validate. the swfObject method 2 valid.

  I'm working on a Mac. Could someone check the page on the victory of the IE and see if the video is running?

  Can I ignore the message 'error' of Dreamweaver?

  Thanks - Susan

  I think that you will have no problem ignoring the message.

  Ken Ford
  Adobe Community Expert - Dreamweaver/ColdFusion
  Adobe Certified Expert - Dreamweaver CS3
  Adobe Certified Expert - ColdFusion 8
  Fordwebs, LLC
  http://www.fordwebs.com
  http://www.cfnoob.com

• Cannot convert abcd of the type class java.lang.String interface java.util.List

  Hello

  I get an error of "cannot convert the class type abcd java.lang.String interface java.util.List" where "abcd" is a string in a listbox.

  and my code is something like this

  < af:selectOneListbox id = "lstcatg" label = 'List of categories' partialTriggers = 'proud '.

  value = "#{viewScope.RegWoComp.lstboxcatg}" >

  < f: selectItems id = value="#{viewScope.RegWoComp.customList}"/ "lstselect1" >

  < / af:selectOneListbox >

  
  bean

  private list < String > lstboxcatg;

  {} public void setLstboxcatg (List < String > lstboxcatg)

  This.lstboxcatg = lstboxcatg;

  }

  public List < String > getLstboxcatg() {}

  Return lstboxcatg;

  }

  public BindingContainer {} getBindings()

  Return BindingContext.getCurrent () .getCurrentBindingsEntry ();

  }

  Private Sub button (ActionEvent actionEvent)

  {
  JUCtrlListBinding listBindings = (JUCtrlListBinding) getBindings () .get (lstboxcatg);
  Object [] str = listBindings.getSelectedValues ();

  for (int i = 0; i < str.length; i ++)

  {

  System.out.println (STR [i]);

  }
  }

  I tried to use this fact.

  object str = listBindings.getSelectedValue ();

  System.out.println (STR);

  and here, if I change the data type of lstBoxcatg

  private String lstboxcatg;

  {} public void setLstboxcatg (String lstboxcatg)

  This.lstboxcatg = lstboxcatg;

  }

  public String getLstboxcatg() {}

  Return lstboxcatg;

  }

  can I get a nullpointerexception on line object str = listBindings.getSelectedValue ();

  No you can use this code you don't use link layer

  remove this code. You will get the selected value in this string variable

  Just write this about you button action and verification.

  System.out.println (selectedVal);

  Ashish

• Cannot convert native table error

  I try to run the following code to the will a bunch of VmfsVolumes:

  var specs = new Array();
  for each (var unres in unresolved)
  {
    var resolutionSpec = new VcHostUnresolvedVmfsResignatureSpec([unres]);
    specs.push(resolutionSpec);
  }
  
  
  var unresVmfsResults = u_host.configManager.storageSystem.resolveMultipleUnresolvedVmfsVolumes(specs);
  for each (var res in unresVmfsResults)
  {
    System.log(res.vmfs.name);
    System.log(res.fault.localizedMessage);
  }
  
  

  I get this error message:

  Cannot convert org.mozilla.javascript.NativeArray@53a11a66 to [com.vmware.vim.vi4.HostUnresolvedVmfsResolutionSpec]

  
  

  I have no idea how to do to create a strongly typed array in Javascript, and I'm not even sure its possible.  Anyone know how to get around this problem?  I tried to use the form var = [];  I also tried to feed the first resolutionSpec in manually as: form var = [resolutionSpec].

  
  

  form var = new Array(); and form var = []; are roughly equivalent.

  What is the content of the unresolved variable that you iterate in the first loop?

  An obvious error is that resolveMultipleUnresolvedVmfsVolumes() accepts an array of VcHostUnresolvedVmfsResolutionSpec, but you claim with VcHostUnresolvedVmfsResignatureSpectable.

  Also, you are passing [unres] as an argument in the constructor, but according to the API Explorer this constructor has no arguments. Instead, you need to instantiate the script using its constructor with no arguments object and then just set its properties.

• FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  Hello friends,

  After the end of my process of cloning... I try to change my login user ID pwd through FNDCPASS, but, unfortunately it show me this error as I try to used the @CMclean.sql. also, you cannot run.

  
  

  FNDCPASS: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: no such file or directory...

  
  

  Score help out me
  

  Post the details of the version of the application and the operating system.

  Have you from the correct env file before running FNDCPASS? See (Doc ID 943005.1) for more details.

  If it comes to 12.1.x on Linux OS, please make sure that you follow all the steps by (Doc ID 761564.1) / (Doc ID 761566.1) and you have all applied pre - req OS packages.

  Thank you

  Hussein

• libXi.so.6: cannot open shared object file: no such file or directory

  Hi all

  I install EBS R12.2 on OEL6.5

  I run:

  [root@crp2 ~] # / home/staging/startCD/Disk1/rapidwiz/rapidwiz

  Installation Wizard fast is to validate your file system...

  CMDDIR = / home/scene/startCD/Disk1/rapidwiz implementation

  Quick Installation Wizard will now launch the Java Interface...

  [root@crp2 ~] # Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/staging/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/lib/i386/xawt/libmawt.so: libXi.so.6: cannot open shared object file: no such file or directory

  I downloaded the number of towers which will libXi.so.6 which is XFree86-libs - 3.3.6 - 20.i386.rpm.

  But when I install it I have error

  [root@crp2 RPMS] # rpm - ihv XFree86-libs - 3.3.6 - 20.i386.rpm

  Preparing...                ########################################### [100%]

  file /usr/X11R6/lib/libXtst.so.6.1 to install XFree86-libs conflicts - 3.3.6 - 20.i386 with the xorg-x11-libs-compat-6.8.2-1.EL.33.0.1.i386 package file

  How to solve this pleaseeee...

  Thank you

  MK

  Hello

  Refer to this blog post, it may be useful:

  Osama Mustafa Oracle blog: "java.lang.UnsatisfiedLinkError" when to run Oracle EBS

  Thank you

  A H E E R X

• How to print after the Error Msg: cannot convert the postscript file

  "Maverick", we installed our MacBook Pro and our printer is a HP 8600.  We have failed to get our Adobe Acrobat Professional 8 to print our PDF files.  Instead, we got the error msg: impression: cannot convert the postscript file.  We have used this application for years without any problem.  How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?

  I think that we have solved the problem.  Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600.  We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro.  After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.

• TypeError: Error #1034: Type coercion failed: cannot convert flash.display::MovieClip@64e6ca1 in fla

  Hi all

  I get this window pop-out error when I pressed a button. The earpiece button contains the following code:

  btn_start.addEventListener(MouseEvent.CLICK, gotoStart);
  function gotoStart(e:MouseEvent):void{ 
       btn_start.removeEventListener(MouseEvent.CLICK, gotoStart);
       gotoAndStop("START");
  }
  

  TypeError: Error #1034: Type ISP led constraint: cannot convert flash.display::MovieClip@64e6ca1 to flash.display.SimpleButton

  at flash.display::MovieClip/gotoAndStop()

  to attendanceCheck / gotoStart () [attendanceCheck::frame2:31]

  After searching the cause for a while, I can't find what's wrong with it...

  Help me please...

  Thank you

  Zainuu

  As I said, there is nothing wrong with this code.  So, since the error indicates that you treat a MovieClip, as if it were a SimpleButton control, somewhere in your design you have done something to try to force this MovieClip to be a button (or possibly vice versa if it's actually a button).  Check the properties panel and elsewhere to see if you have something that could be tempting to be that touches another object type than it is selected.

  Try to create a new movieclip and assign it to that name (detached from each other) and see if you still receive the error.  If it works, then I recommend just create a new movieclip and replace the current where the problem arose.

• Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea

  Hi guys

  I dynamically add new linebreaks in my arraycollections. The first text box fits in the table, but in the second text box is inserted into the table I get the error in the title of this thread. Code below:

  TypeError: Error #1034: Type coercion failed: cannot convert mx.controls::TextArea@7914c29 to myComponents.DocumentTextArea.
  to test2 / getDocObj () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:82]
  to test2 / checkLength () [C:\Documents and Settings\Administrator\My Documents\Flex Builder 3\test2\src\test2.mxml:42]

  private void checkLength(event:KeyboardEvent):void
  {
  var textArea:TextArea = new TextArea();
  textArea = getDocObj (event.currentTarget.id); -Error begins here.
  doc. Text = event.currentTarget.id;
  
  If (event.keyCode == 8 & & textArea.length == 0) {}
  removeChildTextArea (textArea, event.currentTarget.id);
  documentPage.setFocus ();
  }
  Else if (event.keyCode == 8 & & (documentPage.height - documentPage.mx_internal::getTextField () .height) < = (documentPage.height - documentPage.textHeight)) {}
  documentPage.setFocus ();
  }
  ElseIf (textArea.height - textArea.mx_internal::getTextField () .height > = textArea.height - textArea.textHeight) {}
  create new textarea
  var newtextArea:DocumentTextArea = new DocumentTextArea();
  documentContainer.addChild (newtextArea.getTextArea ());
  newtextArea.getTextArea () .setFocus ();
  newtextArea.getTextArea () .addEventListener (KeyboardEvent.KEY_UP, checkLength);
  documentArray.addItem (textArea);
  
  if(documentArray.Length == 0) {}
  newtextArea.getTextArea () = (0) user.user m:System.NET.SocketAddress.ToString ();
  }
  else {}
  documentPointer += 1;
  newtextArea.getTextArea (user.user = documentPointer.toString ());
  }
  }
  }

  private void getDocObj(id:int):TextArea
  {
  trace ("size of table '+ documentArray.length +' and the size of the id is"+ (id) m:System.NET.SocketAddress.ToString () ");
  var findTextArea:DocumentTextArea = DocumentTextArea (documentArray.getItemAt ((id)));
  Return findTextArea.getTextArea ();
  }

  You try to get a TextArea to this DocumentTextArea, it is the problem, why you do not change this line

   var textArea:TextArea = new TextArea();
  

  To do this:

   var textArea:DocumentTextArea= new DocumentTextArea();
  

• Cannot convert * of type class oracle.jbo.uicli.binding.JUFormBinding

  Hello
  Excuse my approach... but I can't... I haven't used this during some time... and I took this to an old APP (working!)
  the error is:
  Cannot convert * of type class oracle.jbo.uicli.binding.JUFormBinding to the oracle.adf.model.BindingContainer interface
  
  and the code is like this

  DCBindingContainer dc = (DCBindingContainer)((fc.getApplication().evaluateExpressionGet(fc,"#{bindings}", BindingContainer.class));

  I watched JUFormBinding and as I see the hierarchy is
  java.lang.Object
  byjava.util.AbstractMap extended
  byoracle.jbo.common.JboAbstractMap extended
  byoracle.adf.model.binding.DCExecutableBinding extended
  byoracle.adf.model.binding.DCBindingContainer extended
  byoracle.jbo.uicli.binding.JUFormBinding extended
  
  so DCBindingContainer is great to JUFormBinding
  
  Thank you
  Pop Florin

  Hello

  and it is easier that it is

  BindingContext bctx = BindingContext.getCurrent();
  BindingContainer bindings = bctx.getCurrentBindingsEntry();
  

  Frank

• Error: cannot access dead object

  [JavaScript application] Error: cannot access dead object.

  This message appears repeatedly after using Gmail, sign out, close the tab, then open a new tab.

  Uploadd disabling Drag & Drop appeared to be... on my 7 machine. Now for my Vista laptop. Thank you.

• error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'__Code: UNICOD problem__ MapiMessage message; __message.lpszSubject = _T ("International Translation package Attached"); Error at this stage. ___

  Project is in UNICODE format in VC6.0 MFC on windows XP

  error C2440: '=': cannot convert from 'unsigned short [70]' to ' char *'
  Code:

  MapiMessage message;
  message.lpszSubject = _T ("International Translation package Attached"); Error at this stage.

  I would know how can I use MapiMessgae in my program using Unicode.

  Suggest me any change in

  Thank you and best regards,

  Sanjay.

  Hello Sanjay

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en/category/vsexpress

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot acess System Recovery Options, need help with the registry. Kindly help.

  Hi, sorry for the long question, but please help.

  To start off the coast, one day out of nowhere, my PC showed a "Login process initialization failed" error As a result, I am able to go pass the stage of "Starting Windows" but can't see the login screen. The way to remedy this problem is to restore windows. Now I'm able to reach recovery system (F8) Options, but it does not allow to login me as "admin". As soon as I select the language and keyboard input mode he asks me user name and password. The strange thing is there are two options for the username "admin" and the other is 'Office' (I did not have any accounts with these names). I read an article on the Dell (my pc manufacturer) website that said to log on as an administrator. But the Recovery Options does not give me access as 'admin' for any password I tried. I tried all the standard passwords and password for my account admin on PC (which has not been named admin btw). I also tried to leave it blank, but Recovery Options points out "the user name or password is incorrect" every time. Now, I tried to find a way to work around and reached here

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/cannot-access-system-recovery-console-invalid/7ff2b01b-9D30-4E10-94a3-bf73a3c5f253?page=1&tab=question&status=AllReplies

  I quote an answer ' I ca, however, access the Recovery Console: . 
  I found a tweak on the Internet to change the registry for a password is not necessary to enter the Recovery Console. I proved that this tweak works as expected by switching between the registry by default DWORD definition ('0') and the twisted DWORD setting ('1').  When the DWORD value is set to '1' I can access all the functions of the Console recovery, but when the value of the default value of '0' without password allows access to the Recovery Console.  The tweak I used is as follows:

  ---
  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\setup\recoveryconsole]
  "securitylevel" = DWORD: 00000001
  "setcommand" = DWORD: 00000000
  ---

  The DEFAULT value"securitylevel" = DWORD: 00000001 '00000000' is (zero).  Note that all tests, as described above has been completed with the default setting for this registry entry.

  While being able to access the recovery with twisted recording Console... »

  Please just help me to implement this tweak. How can I access registry without the need to log in.

  Sorry for these elaborate details, I didn't want to leave anything. Thanks in advance.

  The way to remedy this problem is to restore windows.

  It is correct. To call the system restore, follow these steps:

  1. Use your repair Windows CD to start the computer in Windows Repair Mode. You will not have a password.
  2. Use the system restore to solve your problem.
  3. Plan in advance and create, test and document a spare, even admin account that you have a spare House key. On behalf of alternatives would easily get around your current situation.

  If you do not have a CD to repair Windows, ask a friend to burn you through the control panel / backup and restore.

• Cannot convert 'Double room' to 'double '.

  Update a variable 'amount', including the difficulty is twofold, to a BasicEditField which is a String:

      //Values
      private double amount = 100000;
  
      //Fields for data entry
      private BasicEditField amountField;
  
  amount = Double.valueOf(amountField.getText());
  

  I get this error message: cannot convert from 'Double' to 'double'

  Think that I thought about it:

  amount = Double. parseDouble (amountField.getText ());

• Windows 7 - cannot install system updates - "Windows Update service... does not work."

  original title: Windows 7 - cannot install system updates - "Windows Update cannot currently check for updates, because the service is not running." You may have to restart the computer. "

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: try to get weekly updates applied.  Since the 1845 update I couldn't have Nicrosoft updates applied to my system.  A disable the updates because the system continues to try, and I try again me and try all the time.

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Dena,

  I solved the problem: http://helpdeskgeek.com/windows-7/cannot-run-windows-update-on-a-windows-7-pc/

  "FixIt" MS reported that he had fixed everything, and W7 update mechanism works very well- but the problem remains:http://support.microsoft.com/kb/971058