Cannot copy image/layer...greyed

Similar Questions

• Cannot copy images from any type of disc. ??

  Cannot copy pictures on any type of disc. the computer behaves as if she is unable to format the drive? I thought that this was done automatically.

  Hello

  ·        What is the exact error that you are experiencing when you try to burn the disk?

  ·        Outside photos, you are able to burn other files on the disk?

  ·        You use any burning software to burn the photos to disk?

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I suggest to format the drive and check if you are able to burn discs or not. Follow the steps mentioned below.

  a. be aware that Windows XP, in its native form, does not directly support CD formatting. Formatting a CD requires support for the ISO images that is missing from Windows XP.

  b. download or buy CD and formatting of third-party burning software. Third-party CD utilities include features like CD burning, imaging of CD and the CD put fit.

  c. install the third-party software, following specific instructions in accordance with the software documentation. Many programs will require you to restart Windows to complete the installation. Close all other applications and do it.

  d. place the disk you want to format in the drawer. Make sure that it is in the drawer of CD - R or CD - R/W and not another tray (tray of DVD) or a simple CD player.

  e. start the third-party application and follow the instructions on the screen as they appear. Choose the "Format CD" option on the file menu, or choose 'Create a new CD.' This application controls tend to vary an application to, so be sure to check the documentation.

  f. don't forget to leave the CD in the taskbar until the process is completely finished. If you remove the CD before the completion of the formatting, you will ruin the disc.

  g. give a volume name to your new CD.

  I also suggest you to check the article mentioned below.

  Should which CD or DVD format I use?

  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  Note: This article also contains information about Windows XP.

  I suggest you run the fix it is present in the article below.

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Cannot copy image from a url from an invocation

  Hi, I do an application what and now work correctly, but I have a problem. When my application is called is reciving a url as follows:

  file:///accounts/1000/invoke/com.MyApp.image.open/xa000000000000a/IMG_00000027.jpg

  As you can see, this url points to an image, and is the uri from the received call parameter. At this stage I can show the image perfectly in my application (because it is invoked as a card in another application). The goal is to save the url of the image in a database for future access to the app. I tried to register the url because it is above, but now I understand why I could not properly gwendoline image (the stuff of card).

  Then I tried the following:

  void ApplicationUI::addRecord (const QUrl & url)
  {
  Create a new folder
  QDir (QDir::currentPath() + "/ shared/photos/").mkdir("myApp");
  Setting up the source url
  QString from = url.toString ();
  Setting up the destination path
  QString = QDir::currentPath() + ' / shared/photos/myApp ";
  Copy of the file
  QFile::copy (from, to);
  }

  I have permission to access_shared. I didn't really now what's the problem with that. I'm kinda a noob and I'd appreciate your advice and help. Thank you!

  Hello!

  Thank you!

  I achieve my goal like this:

  void ApplicationUI::addRecord (const QUrl & url)
  {
  Create a new folder
  QDir (QDir::currentPath() + "/ shared/photos/").mkdir("myApp");
  Get the file and file information
  QFile file (url.toString ());
  QFileInfo fileInfo (file);
  Setting up the source url
  QString from = url.path ();
  Setting up the destination path
  QString = QDir::currentPath() + ' / shared/photos/myApp / "+ fileInfo.fileName ();
  Copy of the file
  QFile::copy (from, to);
  }

  Originally, I used QString from = url.toString () and got:

  file:///accounts/1000/invoke/com.MyApp.image.open/xa0000000000058/IMG_00000066.jpg

  Then I tried = url.path () QString and I got:

  / Accounts/1000/Invoke/com. MyApp.image.Open/xa0000000000058/IMG_00000066.jpg

  In addition, I changed the setting to QString to QDir::currentPath() = + ' / shared/photos/myApp / "+ fileInfo.fileName ();

  Small piece that I could copy the image.

  Hope you find it useful!

• Cannot copy images from text to Photos

  (Running 1.3.5.1)

  When I get a picture ISO messase text, it allows me to see ad offers the possibility to 'copy of Photos ".  When you select 'Copy of Photos', he said is to do and refer you to the text message - but the photo is never actually copied.  Anyone see this behavior, or better yet know if it can be fixed?  Is this a bug in the OS?

  Mule

  Tagz - UPDATE!  It works, it was not just to put pictures where I expected them.  Is there a way to sort the most recent photos first?  I would have thought about it earlier that... :-)

  Mule

  Message edited by Mullet99 on 01/24/2010 09:39

• . Help copying images - "cannot create or replace family photos. Access is denied.

  When I try to copy pictures from my computer to a Lexar removable I get this message. "Cannot create or replace family photos. Access is denied. Make sure that the disk is not full or write protected and this file is not currently in use. Please help, but keep it simple that I am barely computer literate

  Just a guess... but maybe you copied too
  files in the directory root of the card. (Root directory
  simply means level 1 with no folder)

  Remove files from the media, and then try again.

  For example I just tested a 1 GB SD card and the
  maximum number of files I can copy to the root
  Directory is 180. If I add a file more I get a dialog box
  who says: "cannot copy IMG_4321; The directory
  or file cannot be created. And if I try to add a file
  before removing a file to make room for it... I have
  Get the following message: "unable to create the folder.
  "New folder" failed to create the directory or file.

  If I make space by deleting files and add empty
  files to the card... I can copy as many files as I have
  here in the files (up to the limit of memory of)
  the card).

  I don't know if you noticed but most digital
  Cameras to create folders with 100 photos per folder.
  They do not image files in the root directory
  of the card.

• How to copy a layer and its mask layer to another image?

  With the help of PSE9, how a copy a layer and its mask layer to another image?

  Online Help includes a topic on how to copy a layer but try the different methods in the help topic results in either nothing copied or just the layer without his mask layer is copied.  Thank you.

  How did you get a copy?  If you float your images so that they are both partially visible in the work area, make one with the being copied the active layer.  Then, drag the layer in the layers palette on the other image.  Now you should have both the layer mask on the second image.

  Jürgen

• Cannot copy file: cannot read the source code or drive WINDOWS XP

  I'm trying to transfer pictures on my old XP computer on an external hard drive.  After performing a backup on the drive hard seagate WD I went looking for pictures on the external hard drive, and they aren't there.  I went back on the XP machine and tried to copy the files to a CD but I get the message cannot copy file: cannot read the source code or the player.  I can open images but cannot move it to another folder or copy and paste pictures anywhere.  The photos are saved in an outdated version of microsoft's digital imaging software.  Help, please.

  Hello

  (1) is the specific question of the images?

  (2) where the images are on the computer?

  You can try the following methods and check the status of the issue.

  Method 1:

  Configure the computer to clean start State to check software conflicts. See the following link on how to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 4 of the above article.

  Method 2:

  If the problem is specific to the pictures folder, then it might be a problem with permission. You can try to take ownership of the folder and check if you can transfer it. read the following article.

  How to capture a file or a folder in Windows XP?

  http://support.Microsoft.com/kb/308421

• Impossible to drag or copy images on CD

  Burn photo CD

  Cannot drag or copy images on the E drive to burn to a CD. What I am doing wrong?

  I click on the CD icon that says "Burn" and I get a message that says: "this computer does not have a CD/DVD drive. What I don't have...

  See if this link from Microsoft Support has no use for you or not.

  Diagnose and repair problems with your CD or DVD drive when trying to read or burn media automatically.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems
  t-4-2

• Cannot add image file to the current folder

  2 days ago my Qde always ok, but now I can copy images on the active folded. but my application cannot recognize that images and return

  Invalid asset ...
  Image not found ...
  

  error. I think that my qde had some problem. Anyone have idea?

  work on 10.0, 10.1, 10.2 or switch force and back?

  your assets.index is maybe corrupted

  Try this:

  Quit Momentics

  go into your file system project and delete assets/.assets.index

  reopen Momentics

  do a refresh

  and clean up the project

• How to fix a packaging error - "cannot copy the linked files?

  I use a file that I used previously to a directory.  I rename to use the layout, but use all of the new images, etc.  It shows all links are good in the document, but when I go to package, I get the message that it cannot copy the related files.  I have InDesign CC 2014 and OS X El Capitan.  Any ideas on a fix?

  Looking for special characters in link names. I think that only dashes and underscores (maybe a few others) are allowed in file names. Also look for foreign language characters.

• cs6 PS why the command copy is grayed out - cannot copy obj?

  PS cs6 cc:

  Why the command copy is grayed out - cannot copy obj?

  

  lsepolis123 wrote:

  If press Ctrl + A selects all the psd doc... or (when the selected layer - in the Panel layers) in the tool move or the selection tool, well?

  While the ants marchimg shows the layer limits what you write the entire document. Only the pixels of the target layer are selected.

  Here are two screenshots.

  I have two documents open in Photoshop. There are three top ob Basemap layers layer a red, a green and a blue.  Second teas of the same size but only a white background layer.

  I aim for the Green layer made a Ctrl + A to select the green channel any note the dotted moving line describing the composite view of the entire document. I followed the Ctrl + A with Ctrl + C (copy).

  I then passes to the second document just a white background layer and did a Ctrl + V after the background screenshot shows the results.  Only the green pixels have been copied to the Clipboard.

  

• How to copy a layer Style to one layer to another PSE9

  I'm copying 'fx' of an image to another, but when I try to drag to the next picture, it doesn't seem to work someone could help

  I held the ALT key and dragging but no luck...

  Title of the message was edited by: Brett N

  One way is to copy and paste the layer styles:

  1. right click on the layer with the layer style, and then choose the copy layer Style

  2. choose another layer and right-click and choose Paste layer Style

  (or select all of the layers that you want to copy the layer style to choose the paste layer Style)

  The above work equally between different documents.

  (click on the screenshots below for more great views)

  Also available in the menu layer:

  

  copy layer style

  

  Paste the layer style

  

• Issue the import to the 4.1 of SD/file, 'could not be read' and 'cannot copy at the location requested.

  Try to import photos from an SD card that worked in the past. First of all, I get an error "the following files could not be imported because they could not be read" with a list of all the files. This includes files I imported successfully into LR in the past (tried as a test, because they did not get caught by the 'new' filter).

  So I copied all the images on my HD and tried to import from there and got a different error: "Cannot copy a file to the requested location" for all files.

  Parameters: "copy as DNG", "in the subfolder: date: 2012/YYYY-MM-DD".

  I am running OSX 10.7.4 and Lightroom 4.1

  The files are a mix of JPG, CR2, and MOV

  Fixed: in some sort the destination folder got spent in my root my pictures folder HD intstead. WOW! Yay for hidden features

• How to copy a layer from one psd to another

  How to copy a layer from one psd to another

  Select... Select all, Ctrl + C to copy the contents to the Clipboard, and then in the other PSD image use Ctrl + V to paste the content in its own layer.

  Ken

• Can't copy image!

  NEVER had this... client sent 14 jpg. 2 were NOT copyable! (Select all, copy... NOTHING!) Do not know if I download the image here if this will always be the case (1285x1500W pixels). Is there a way the image could be "locked"?

  NOTE: I duplicated the layer and then drag the layer to the new document. If I tried to select the new layer and paste it in the new document, it looks like in history 'Paste the path' but no way to access/selection shows up. REALLY weird (glad that I got to drag the layer copy!).

  You have probably a few trails. If you want to copy just the image, go to

  the Panel traced and click below for paths paths are not active, then

  try to copy the image (layer).

  MTSTUNER