Cannot create the data store: the current licence or ESXi version prohibited the execution of the requested operation.

Similar Questions

• Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  Problem in Adobe Illustrator CS6: could not open the illustration. Cannot complete the requested operation.

  I was working on my .ai file and pasted a picture of PowerPoint to the adobe illustrator file. Then, AI crashed graphics colorful/patterns/images in my .ai file become black and white, and then I closed the file and may never reopen. I have tried a few apps demo available online recovery (as: service to restore file corrupted Illustrator for anyone ) but they do not work so far... What should I do? Thank you in advance!

  [Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]

  deppie,

  Because obviously, cannot you try to copy and paste the work of a new document, one other thing that is often attempted is first of all create a new document and the file > Place (PDF summary, if any, of the) a corrupt how much can be saved this way.

  Here are a few Web sites I hope more effective where you can see if it can save the actual file, and if possible, you can pay a subscription having,.

  http://www.recoverytoolbox.com/buy_illustrator.html

  the http://Markzware.com/Adobe-Software/Fix-Illustrator-file-Unknown-error-occurred-pdf2dtp-fi collection.

  http://www.Illustrator.fixtoolbox.com/

  I remember, the first is for the victory and the second is for Mac, while the third should be both.

  Here are some pages about yourself the wrong with it:

  http://daxxter.WordPress.com/2009/04/16/how-to-recover-a-corrupted-Illustrator-AI-file/

  http://helpx.Adobe.com/Illustrator/KB/troubleshoot-damaged-Illustrator-files.html

  http://kb2.Adobe.com/CPS/500/cpsid_50032.html

  http://kb2.Adobe.com/CPS/500/cpsid_50031.html

  http://helpx.Adobe.com/Illustrator/KB/enable-content-recovery-mode-Illustrator.html

• vRA 6.2.3 new company creation group error - "cannot complete the requested operation: resource not found.»

  Hello

  I have tried to create a new group of companies in vRealize Automation 6.2.3 and received the following error:

  The requested operation cannot be completed: resource not found.

  I've attached a screenshot of the error.  All services on the device of vRA show such registered.

  I think that this is related to the duty reinstall my SQL IaaS database a few weeks back, but I'm not sure.

  Any help would be greatly appreciated,

  -Mark

  I finally got to the bottom of this.  It was because of the vRA IaaS server being unable to speak to the DTC resource on my SQL cluster due to these two components are in different domains.

  If you are interested, I have documented the solution here:

  http://virtualhobbit.com/2015/10/02/configuring-DTC-access-between-vrealize-automation-IAAS-and-Microsoft-SQL-Server/

  -Mark

• The current permit or ESXi version prohibits running the requested operation

  I get the following error when I try to stop or restart a 5.5 ESXi update 2 host so that start, suspend or shutdown VMs: "the current permit or ESXi version banned the execution of the requested operation." I use version 1.4.509000 of the Android app.  This application should let me not do these basic operations as free vSphere client does as well. I don't know if VMWare is deliberately restrict what we are allowed to do in the application or if the application has a bug that prevents it to perform these basic tasks.

  I am able to reproduce the problem on another ESX Server.

  The problem has been resolved.

  This is beta version if you don't mind trying:

  https://horizonworkspace.VMware.com:443 / data/shf/EUVKOvu6TV29BOXfLkF30gAENzA5OQA =

  Let us know how it goes.

• Cannot create the data in vSphere 4.1 store

  Hi all

  I can't create a data store in my client vSphere 4.1.

  When I start to create the data store, I get this error, notice how it also says that disk is empty - it is also misrepresentation of the size of the 250 GB drive - should be 3.4 TB

  

  I can go beyond this by pressing return, and then click Next, but after that I entered a data store name, this error pops up:

  

  I don't know why this is, I've also tried it on several other client machines, all show the same errors - I join two error logs in the hope that someone will be able to shed some light on this.

  Thank you

  K

  As said, LUNs presented to the host need to be ESXi <= 2tb="" minus="" 512="" bytes="" in="" order="" to="" work="" as="" expected.="" for="" the="" reason="" of="" this="" limitation="" see=""> http://kb.vmware.com/kb/3371739

  Alternatively, you may consider upgrade to ESXi 5.0, supporting the LUN with up to 64 TB.

  André

• Cannot create the data store

  Hello!

  I installed ESX 3.5 update 4 with success, but I met following problem: I can not create the data store!

  Customer VI can't see my hard drive!

  Once the connection directly to the ESX Server using ssh, we see:

  # esxcfg-vmhbadevs

  #            # empty!!!

  # df h

  Size of filesystem used Avail use % mounted on

  / dev/hde2 3.5 G 1.4 G 2.0 G 41%.

  / dev/hde6 24% 19 M 61 M 84 M/Boot

  No 124M 124M 0 0% / dev/shm

  / dev/hde7 525M 20 M 479M 4% / var/log

  # vdf h

  Size of filesystem used Avail use % mounted on

  / dev/hde2 3.5 G 1.4 G 2.0 G 41%.

  / dev/hde6 24% 19 M 61 M 84 M/Boot

  No 124M 124M 0 0% / dev/shm

  / dev/hde7 525M 20 M 479M 4% / var/log

  devices/vmfs / 33M 33M 0 0% / vmfs/devices

  # fdisk-l

  Disk/dev/hdk: 200.0 GB, 200049647616 bytes

  255 heads, 63 sectors/track, 24321 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  FB/dev/hdk1 1 16709 134215011 unknown

  FB unknown/dev/hdk2 16710 24321 61143328 +.

  Disk/dev/hdi: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  /dev/hdi1 * 1 182401 1465135968 unknown fb +.

  Disk/dev/hdg: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  /dev/hdg1 * 1 182401 1465135968 unknown fb +.

  Disk/dev/hde: 500,1 GB, 500107862016 bytes

  255 heads, 63 sectors/track, 60801 cylinders

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  / dev/hde1 1 96 763904 5 extended

  Partition 1 does not stop the cylinder limit.

  / dev/hde2 97 548 3630690 83 Linux

  FB/dev/hde3 618 60802 483425304 unknown

  / dev/HDE4 549 617 554242 82 Linux swap +.

  / dev/13 27 fc 112624 unknown hde5

  / dev/hde6 * 2 12 88326 83 Linux

  / dev/546178 95 28 hde7 83 Linux +.

  Partition table entries are not in the order of disc

  Disk/dev/hdc: 1500,3 GB, 1500301910016 bytes

  255 heads, 63 sectors/track, 182401 bottles

  Units = cylinders of 16065 * 512 = 8225280 bytes

  + Device boot start end blocks Id system.

  / dev/hdc1 43932 182401 1112260275 7 HPFS/NTFS

  /dev/hdc2 * 1-11252-90381658 7 HPFS / NTFS +.

  unknown/dev/hdc3 11253 43931 262494061 FB +.

  Partition table entries are not in the order of disc

  #

  The partitions are present, but vmware won't do an analysis.

  Is there a way to understand what happened?

  My setup

  motherboard: Tyan Thunder n3600m S2932GRN

  disks: SATA seagate and WD.

  NIck

  I see the barebone specification and seem that your controller is a 'soft' RAID

  Take a look at the configuration of the SATA controller.

  When your drive will be recognized as/dev/sdXX, then you can create your data store.

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• ORA-19504: cannot create the file '+ DATA '.

  Hello everyone.

  This is the scenario:

  We have a test server that is used to restore daily backups of the Production database. Restore us the database with the same SID as the production one.

  For specific reasons, we need create a second database (with a different SID) on this server with an older backup from the production one. To realize that I'm trying to use a part of the "DUPLICATE without connection to the target" tutorials on the web.

  I tried the simple guide that I found which is:

  (1) copy the backup files cold /somedirectory

  (2) start OLD database with nomount

  (3) connect RMAN with OLDER as an auxiliary

  (4) run the following: DUPLICATE DATABASE FOR OLD BACKUP LOCATION ' / somedirectory' NOFILENAMECHECK.

  Here's the result (I deleted some lines because of the size of it):

  ----------------------

  RMAN > ProdDB to OlderDB DUPLICATE DATABASE

  2 > LOCATION of BACKUP "/ home/oracle/OlderBackupFiles.

  3 > NOFILENAMECHECK.

  4 >

  From October 1, 14 Db double

  content of Script memory:

  {

  clone of SQL 'alter system set control_files =

  "+DATA/OlderDB/controlfile/current.829.859839217" comment =

  ' Set by RMAN "scope = spfile;

  clone of SQL 'alter system set = db_name

  "ProdDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone of SQL 'alter system set db_unique_name =

  "OlderDB" comment =

  ' Modified by RMAN duplicate "scope = spfile;

  clone to stop immediately;

  Start clone force nomount

  Restore controlfile primary clone of ' / home/oracle/OlderDB/controlfile_ProdDB_20141001_4159.bkp';

  change the clone database mount;

  }

  execution of Script memory

  SQL statement: alter system set control_files = comment "+DATA/OlderDB/controlfile/current.829.859839217" = "defined by RMAN" scope = spfile

  SQL statement: change the system db_name set = comment "ProdDB" = "modified by RMAN duplicate" scope = spfile

  SQL statement: alter system set db_unique_name = comment "OlderDB" = "modified by RMAN duplicate" scope = spfile

  (...)

  From restoration to 1 October 14

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  channel ORA_AUX_DISK_1: restore the control file

  channel ORA_AUX_DISK_1: restoration complete, duration: 00:00:03

  output file name=+DATA/OlderDB/controlfile/current.829.859839217

  Restoration finished in October 1, 14

  mounted database

  output channel: ORA_AUX_DISK_1

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = 191 type device = DISK

  content of Script memory:

  {

  until the SNA 274262921.

  the value of newname for datafile clone 1 again;

  the value of newname for datafile clone 2 again.

  the value of newname for datafile clone 3 again.

  the value of newname for datafile clone 4 new ones;

  the value of newname for datafile clone 5 again.

  the value of newname for datafile clone 6 again.

  the value of newname for datafile clone 7 again.

  restoration

  database clone;

  }

  (...)

  From restoration to 1 October 14

  using the ORA_AUX_DISK_1 channel

  channel ORA_AUX_DISK_1: from the restore backup set data file

  channel ORA_AUX_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_AUX_DISK_1: restore datafile 00001 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00002 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00003 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00004 in + DATA

  channel ORA_AUX_DISK_1: restore datafile 00005 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00006 to + DATA

  channel ORA_AUX_DISK_1: restore datafile 00007 to + DATA

  channel ORA_AUX_DISK_1: reading from the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  channel ORA_AUX_DISK_1: ORA-19870: error when restoring the backup /home/oracle/OlderDB/database_ProdDB_20141001_4157.bkp piece

  ORA-19504: cannot create the file '+ DATA '.

  ORA-17502: ksfdcre:4 cannot create the file + DATA

  ORA-15041: diskgroup space 'DATA' exhausted

  switch to the previous backup

  Oracle instance started

  (...)

  content of Script memory:

  {

  clone of SQL 'alter system set = db_name

  "OlderDB" comment =

  ' Restore the original value by RMAN "scope = spfile;

  clone of SQL 'alter system reset db_unique_name scope = spfile;

  clone to stop immediately;

  }

  execution of Script memory

  Errors in the script of the memory

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06136: the auxiliary database ORACLE error: ORA-01507: database not mounted

  ORA-06512: at "SYS." "X$ DBMS_RCVMAN ', line 13466

  ORA-06512: at line 1

  RMAN-05556: not all data files have backups can be recovered on SNA 274262921

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06026: some targets not found - abandonment of restoration

  RMAN-06023: no backup or copy of the file 4 found to restore

  RMAN-06023: no backup or copy of datafile 3 found to restore

  RMAN-06023: no backup or copy of datafile 2 found to restore

  RMAN-06023: no backup or copy of datafile 1 found to restore

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 15:39:11 01/10/2014

  RMAN-05501: abandonment of duplicate target database

  Complete recovery manager.

  ------------------------------------------------------------------

  The first mistake of the stack was ORA-19504 while trying to restore the backup of the database.

  First thing I took a glance was ASM occupation but it enough available space.

  The second was a permission problem, but it doesn't seem to be the case because RMAN can correctly write the controlfile to ASM.

  One have some advice on what I should look for?

  Thanks in advance sorry for my English.

  Select this option.

  Hello.

  Thanks, but is not the case. As I have said, that the DATA diskgroup has space enough he uses only a single disk in a RAID.

  But I solved my problem... To the auxiliary database, I added the following to the spfile:

  DB_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  LOG_FILE_NAME_CONVERT = '+ DATA/ProdDB', '+ DATA/OlderDB ".

  I don't know why, but with these two clauses, it worked well. Perhaps RMAN was trying to restore it to the wrong place?

• Cannot create the VSA cluster: Cluster subnet is invalid. Should not be "network address".

  Hello world!  I had two questions on a configuration current VSA that I'm doing for a client.  Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines.     Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.

  1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.

  2. I received, during the vsa cluster configuration, the error message:

  Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0

  Now, I saw the article on what it could probably be.  The gateway appears and is correct.  The problem is that I know that the default gateway is not the ping requests.  I corrected it but have not begun installation because of the question #1 above.  Since the gateway is now who responded, what would be the possible resolution.  Thanks in advance to all those who support!

  Hey Nate,

  You're right about the behavior of the cluster wizard.  It does not consume space and leave the space used by the existing virtual machines.  Once that adjust you network settings (an adresse.0 may be the entry door?)  You should be able to proceed with the creation of cluster.

  IKE

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• Cannot start db &gt; ORA-09925: cannot create the audit trail file

  version 10.1.0.5.0
  AIX 3 5 00C9CEA04C00 dcxnim01
  
  When I'm trying to start db, getting this message any idea?
  
  SQL > connect virtue sysdba;
  ERROR:
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  ORA-09925: cannot create the audit trail file
  IBM AIX RISC System/6000 error: 89: invalid file system control data detected
  Additional information: 9925
  
  
  Here's the tail of the log of alerts
  
  3 Private_strands to the log command
  Thread 1 Advanced for you connect to sequence 3923
  Currently journal # 1, seq # 3923 mem # 0: /db01/oradata/ldapdcx1/ldapdcx1/redo01.log
  Fri 6 Aug 16:48:34 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_j001_991348.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:35 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_mmnl_508106.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_ckpt_839714.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27072: IO file error
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information: 9
  Additional information: 3
  Fri 6 Aug 16:48:38 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_lgwr_905470.trc file:
  [ORA-07445: exception encountered: core dump [] [] [] [] []]
  ORA-27063: number of bytes read or written is incorrect
  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1
  Additional information: 1024
  Fri 6 Aug 16:49:07 2010
  Errors in the /oracle/admin/ldapdcx1/bdump/ldapdcx1_pmon_848078.trc file:
  ORA-00470: LGWR process ended with the error

  IBM AIX RISC System/6000 error: 5: i/o error
  Additional information:-1

  Problem of the OS.
  What is the problem at the level of the BONE with the disc?

  unpacking of tail - 100

• Error in retrieving the metadata of HFM. Cannot create the file

  In our HFM 11.1.2.3.503, we get an error when we try to extract metadata from any application of HFM. The States of error message failed to create the file.

  We are on hfm.501 but I tried with connecting to 503 to see if it solved the problem, but there was no solution in sight.

  Error code:

  {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}

  Summary of Message System

  Cannot create the file.

  Details of the Message System

  Error reference number: {796CEDB3-FC01-4A9C-856F-06FEDBF035F2}; User name: BI-DEMOS5$
  NUM: 0 x 80040230; Type: 1; DTime: 16/12/2015-21:27:04; SVR: BI-DEMOS5; File:; Line: 0; Worm:;

  There is no indication where he tries to put all the files so that I could try to find out if there is a setting somewhere pointing to a folder that does not exist or similar.

  Try the revision of the following document:

  • Hyperion Financial Management (HFM) error "unexpected error: 80040230 has occurred" trying to to Scan, load or extract meta-data (Doc ID 1282089.1)

• DBCA cannot create the database in 12 c in Windows

  Hello

  After the installation of Oracle 12 c on R2 Windows Server 2012 and successfully running the netca command to configure the listener, I run with the DBCA tool question

  It throws an error message of "Recovery Manager could not restore the data files"

  I looked at the log files, here is some information:

  Corrupt block 1 found during the backup piece, reading file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, corr_type = 4

  Review of blocknum = 1, file=C:\ORACLE\PRODUCT\12.1\DBHOME_1\ASSISTANTS\DBCA\TEMPLATES\SEED_DATABASE. DFB, found the same corrupted data

  Not sure if this helps, but I am attaching several log files to help debug the problem.

  I read the post DBCA cannot create the database in 12 c, but it doesn't quite have an answer.

  Any help is appreciated.

  Thank you

  Pranav

  Looks like a bad installation or a bad block on your disk. Have you tried creative using the "Custom Database" model in the wizard dbca (one that does not come with the data files)? It will take more time to create, but shouldn't read the dbca reported as corrupted file

• 11.1.2.3 EPM environment - cannot create the sample HFM application.

  Hi Experts,

  I have a particular question of HFM on newly built EMP 11.1.2.3 environment - cannot create the sample HFM application.

  HFM: 11.1.2.3.100

  OS: Windows Server 2008 R2 Enterprise Server 64-bit

  I get "Unspecified error", when you create a sample Application using the workspace.

  HFM. ODL.log:

  [2014 02-09 T 21:35:15 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHFMCASSecurity.cpp] [line: 546] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: the system cannot find the specified path.]
  ] [paramString:] unspecified error

  [2014 02-09 T 21: 35:16 - 06:00] [EPMFM] [ERROR: 16] [HFM-80004005] [HFM] [ecid: 004wVzsXFaL8tlVvy0bAD00002OX0000vX] [Org: oracle] [host: auhodtest] [pid: 3472] [tid: 3516] [username:] [file: CHsxServerImpl.cpp] [line: 4890] [version: 11.1.2.3.100.4261] [appName: HsxServer.exe] [devString: STAT] [paramString: admin@Native Directory;] Unspecified error

  Viewer application event log:

  Log name: Application
  Source: Hyperion Financial Management
  Date: 09/02/2014-15:35:16
  Event ID: 11
  Task category: no
  Level: error
  Keywords: Classic
  User: AD1\! fdminstall_abc
  Computer: auhodtest.oracle.com
  Description:
  Error 11;! fdminstall_abc; 09/02/2014-15:35:16; CHFMCASSecurity.cpp; Line 546; <? XML version = "1.0"? >
  < C'estr > < Ref > {92DCCDF8-B8C1-4F61-B858-BDADFAE401B0} < / Ref > < AppName / > < user / > < DBUpdate > 1 < / DBUpdate > < CSEC > < Num >-2147467259 < / Num > < Type > 1 < / Type > < DTime > 09/02/2014-15:35:15 < / DTime > < Svr > auhodtest < / Svr > < file > CHFMCASSecurity.cpp < / file > < line > 546 < / line > < worm > 11.1.2.3.100.4261 < / worm > < ExErr > the system cannot find the path specified.
  < / ExErr > < / CSEC > < / C'estr >

  Could someone please suggest me some tips on this problem of creating application - HFM?

  Thank you

  KK

  Sharing the fix in response to the post here:

  The 'Unknown error' error was due to the fact that underlying configuration of HFM with Foundation was broken and so HFM complained of another error, "the system cannot find the path specified".

  Then as an effort to solve the problem, in a scenario where I had to uninstall, reinstall and re-config component HFM which solved the problem.

  Thank you

  KK

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• ORA-19504 cannot create the file "+ FRA/test1".

  Hi all

  OPERATING SYSTEM:-RHEL5

  DB version: GR 2-11

  I'm trying to save a tablespace in the slot path mentioned using the script below

  RMAN > backup tablespace users of devices type disk;

  But what exactly is the error I get: -.

  RMAN > backup tablespace users of devices type disk;

  From backup 2014-01 - 09:12:37:44

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 23 type of device = DISK

  channel ORA_DISK_1: starting full datafile from backup set

  channel ORA_DISK_1: specifying datafile (s) in the backup set

  Enter a number of file datafile = name=+DATA/orcl/datafile/users.259.836129771 00004

  channel ORA_DISK_1: starting piece 1 at 2014-01 - 09:12:37:44

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of the backup command on the 09/01/2014 12:37:45 channel ORA_DISK_1

  ORA-19504: could not create the file "+ FRA/test1".

  ORA-17502: ksfdcre:4 cannot create the file + FRA/test1

  ORA-15005: name "test1" is already used by an existing alias

  Configure it order what I did is: -.

  RMAN > CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT "+ FRA/test1";

  and I create the destination required "+ FRA/test1".

  Thanks in advance

  How about using below

  Set UP the FORMAT of DISC TYPE CHANNEL DEVICE "+ FRA/orcl/test1_t%t_s%s_p%p";

  Concerning

  Anurag