Cannot create the virtual desktop in vCenter - No. Found HD

Similar Questions

• Cannot create the remote desktop connection in two different networks.

  Original title: Windows 7 PRO through internet Remote Desktop connection.

  Two windows 7 Machines Pro. They want to be able to connect to the main computer (Internet router) when they are away at their House on the other.

  It connects via DSL behind a router

  A modem connection cable Roadrunner

  The customer has upgraded to pro. Computers aren't workgroup and domain just PC. What would be the best way to have to allow them to connect to the router. I tried the port on the router, nothing helps.

  Hello

  Remote Desktop connection uses port 3389 in order to listen to the incoming connection.

  When done over the Internet, you will need to forward the port to the IP of the computer.

  Alas, a router can send a specific port only to a single computer.

  Since you have two computers, you must change the listening port for one of them to a different port number and transfer the new port to the IP Address of the computer.

  Let a computer uses the default port 3389.

  In the second computer, change the port to another port of your choice, http://support.microsoft.com/kb/306759/en-us

  Assign static IP to the computers (make sure that it is in the DHCP range).

  In the router open port 3389 to the IP address of the computer with the default setting.

  Open port you used for the second computer to its IP address.

  When you connect, if the connection is a connection by default, he would go to a single computer. When the connection is made with on the second track, he would go to the second computer.

  This page describes another remote program but it represents the principle more in detail,http://www.ezlan.net/vnc.html (towards the end of the page).

  Method to deal with the external IP address here, http://www.ezlan.net/myip.html

  Windows 7 RTD, http://windows.microsoft.com/en-US/windows7/allow-remote-desktop-connections-from-outside-your-home-network

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• Empty Device Manager and for error message "cannot create the enumerated device root need to install Parallels paravirtualization pilot".

  Original title: Device Manager empty

  I have Windows XP Service Pack 3 installed in a Bootcamp partition on my Intel iMac. I can detect and install new hardware such as USB keys. However, the Device Manager window is blank - how can I get the window to display the devices connected to the computer? I am also unable to install Parallels tools when I use Bootcamp as a virtual machine. The error message "cannot create the 'root-enumerated device' necessary to install Parallels Paravirualization driver.

  Hey Harcjk,

  For your first question, go through this article.

  None of the items appear in the device list manager when you open
  http://support.Microsoft.com/kb/311504

  For the second question, here are some suggestions:

  Method 1: Uninstall & install Parallels tools

   

  NOTE: we highly recommend you make a backup of the virtual machine before you continue.

  a. start your virtual machine and cancel the installation of Parallels Tools Wizard.

  b. Click Start--> Panel--> Add / Remove programs and remove the Parallels tools in the list of applications.

  c. restart Windows.

  d. install the Parallels tools by clicking on the Virtual Machine--> install the Parallels Tools.

  Method 2: Uninstall antivirus software

  If the problem persists, try the following:

  Temporarily uninstall all the antivirus software to the virtual machine and repeat steps of the "Uninstall & install Parallels Tools" section above.

  Note: Don't forget to install the back antivirus software, once the problem is resolved.

   

  Method 3: Uninstall, clean & install Parallels tools

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

   

  How to back up and restore the registry in Windows XP

  http://support.Microsoft.com/kb/322756

  a. If the problem persists, try the following:

  b. start Windows.

  c. go to "Start" > "Control Panel" > "Add/Remove Programs" and uninstall theParallels Tools if it is present.

  d. go to 'my computer' > 'C' drive > "Program Files" > "Parallels" folder and delete the "Parallels Tools" folder, if present.

  e. click the Windows 'Start' menu-> 'run' and type 'regedit'. Click OK.

  f. in the registry editor, go to "My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Parallels" and delete the heading "Parallels Tools" and go to "My Computer\HKEY_CURRENT_USER\SOFTWARE\Parallels" and remove the 'Tools' section.

  g. restart Windows.

  h. now install Parallels tools in the 'VM' menu on the Parallels Desktop menu bar, while Windows is running.

  I hope this helps.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot create the vCloud Director VDC

  Hi all

  Need help with my proof of concept of vCloud implementation Director. running on 5.1 vCloud Director unit. Just to give you an idea, I followed the VMware vCloud Director 5.1 Assessment Guide that we find on the VMware Web site.

  Note: My setup does not contane VXLAN although we have the network VLAN supported to improve network performance.  Of the vExpert mentioned to create a dummy VXLAN right in the vCloud Director and I'm not sure how to do this in vCloud Director console. (I noticed a default VXLAN is already created, I understand vCloud 5.1 has this feature is enabled by default)

  Installation succeeded in creating the Org VDC failed with error 'cannot create the VDC' found this disabling and re activation will release the Red 'X' I think it's false positive because it shows us that everything is perfect even if we get an error message in the logs ' status: error "and with" details: Internal Server Error' find the home images below.

  
  

  " In any case when it comes to download media after having created the catalogue for Org VDC we get the error message cannot complete the operation because the current organization VDC"Demo-Org-VDC"is disabled or is not ready '.

  I also noticed that we get an error message on vcenter Server vcloud (cell) cannot create the folder name already exists check the last my vcenter Server error message.

  also attached the logs in the images below.

  I found two post, which there is not yet of resolution and the other said its solved but does not have the fix.

  Any help to point me in the right direction will be appreciated.

  I will be happy to provide you with newspapers if necessary.

  Thank you

  Ibrahim

  I was not talking about data warehouses.  I refer to the view in the vSphere Client.

  Open the vSphere Client... and go to the computers view models and virtual (c# = Home button at the top, then models and virtual computers)

  In this perspective, there is a number of record Blue icons. Make sure that none have the same name as you describe.

  This is directly related to the error message in the client image vSphere that you took in the original post "cannot create folder. "PNG"

  vCloud produces an error because of something that happens in vCenter.

• Error message: cannot create the folder C:\Documents and Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt Settings\

  I recently had a problem with the virus 'Restore Windows'. I was able to get rid of it with Malwarebytes antivirus scanner, but when I turn on my computer I get this error message.
  Cannot create the folder C:\Documents and Settings\ of Settings\Marlon\Local Application BVRP Software\NetWaiting\MoHlog.txt
  
  
  I'm no expert, but I feel that my C drive disappeared, or at least has been hidden. My documents, pictures and music files are all empty. My programs (start > all programs) have been removed and deleted the shortcuts on the desktop. When I go to my computer, my personal and shared document files are not accessible. Under the description it says that they are hidden. My local disk (c) is also empty, but there is still very little space which suggests that programs and files have not been deleted.
  Is it possible to recover my files?
  Thank you

  Hello

  MoHlog.txt file is related to the software of modem on the computer, you can uninstall and reinsta it check if it works.

  Also scan your computer for any infection by virus still present on the computer using any scanner online.

  You can also try the system restore to the point before that the computer has been infected by the virus and check if it helps.

  Good luck!

• Windows cannot create the network map. Responses of the other devices on the network are delayed or on the network, there is a router incapatible

  Original title: no network card
  I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.

  I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.

• Cannot create the VSA cluster: Cluster subnet is invalid. Should not be "network address".

  Hello world!  I had two questions on a configuration current VSA that I'm doing for a client.  Installation of urban contaminated sites brownfield version 5.1.1 = Live, running Virtual machines.     Have everything configured, I'm facing 2 problems that may be a common issue throughout the community.

  1. in the configuration of the cluster initial when you are ready to configure the drives of VSA, the wipeout disc around or just what has been configured space wise. My guess is he running virtual machines on the local data store that it will not write on this part but still format how much disk space has been used.

  2. I received, during the vsa cluster configuration, the error message:

  Cannot create the VSA cluster: Cluster 192.168.12.0 subnet is invalid. Must not be 192.168.12.0

  Now, I saw the article on what it could probably be.  The gateway appears and is correct.  The problem is that I know that the default gateway is not the ping requests.  I corrected it but have not begun installation because of the question #1 above.  Since the gateway is now who responded, what would be the possible resolution.  Thanks in advance to all those who support!

  Hey Nate,

  You're right about the behavior of the cluster wizard.  It does not consume space and leave the space used by the existing virtual machines.  Once that adjust you network settings (an adresse.0 may be the entry door?)  You should be able to proceed with the creation of cluster.

  IKE

• How to create the virtual office to replace the local office?

  I wonder how to use View 4 to a virtual desktop to create, so that it replaces the local office. Users will interact with the virtual desktop, as if it was their local office.

  In Citrix, this is the edition Embedded of Citrix Desktop receiver. What is the equivalent in VMWare?

  You can follow this guide to reuse existing users of http://www.vmware.com/resources/techresources/10023 parts

  View customer replace the explorer.exe shell when windows starts, it opens only to the client view, once authenticated you can configure so it connects the user directly in a desktop computer that has been right to their. If the disconnect / disconnect it goes back to the login screen of client to see again.

  You can also do with a linux install, and use the open linux client view.

  Hope this helps,

  Dan

• Stage of JavaFX Builder 1.0 error: could not create the Virtual Machine Java.

  Hello
  I have installed JavaFX scene Builder under Windows 7 x 32. The installation process is OK, but when I try to launch the app it crashes and displays an error that says:
  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  
  I installed JVM 7u5, JDK 7u5, JavaFX SDK 2.1.1 JavaFX 2.1.1 (Java EE JDK + Glassfish) I would be grateful if someone could tell me if there is something missing. I reinstalled almost all software java several times, but without success.
  
  Kind regards!
  
  Published by: 942925 on June 26, 2012 10:23

  Hello

  This message appears usually when the JVM cannot allocate sufficient memory. It may be the consequence of the stage Builder set - Xmx1024m command line: this is currently followed by default TLD-4515 and will be fixed in the next few weeks.
  For the time being you can give a try on a system with more memory. Moreover, what is your current hardware configuration?
  Concerning

• Satellite C55-A-1JL - 10 Windows sound driver - cannot create the instance of the APO

  Hello.

  I have Toshiba Satellite C55 - A (PSCGAE).

  Yesterday, I've updated my Windows 8.1 to Windows 10 and install the drivers.

  Version 1.2.41.0 of his Studio of DTS (32/64 bit).

  When I try to open this application I have error: cannot create the instance APO.

  What should I do?

  You need to update the audio driver (I guess that your device uses IDT HD audio card)
  But double check in Device Manager, then expand the section audio controllers, video and game to find out what kind of sound card you have.

  DTS Studio seems to be already aware...

  So I advise you to go to the Device Manager and uninstall its drivers Associates
  After reboot new, Windows 10 must check updates automatically... in case that it does not happen, you can try to manually start the update of the Device Manager.

• Connect two Macbook Pro retina to create the extended desktop

  I have two Macbook Pros retina 15 inches (personal: mid 2012, work: mid 2015). They are both under OS x El Capitan 10.11.3

  I would like to connect them to create a wide area network.

  Am I wrong? Is there a way to share the two opens with a bolt of lightning?

  I don't understand what you're trying to do. In your message your refer to:

  1. create the extended desktop

  2. create a WAN

  3. share the poster

  That is what you try to do?

• Java with Minecraft error "error: could not create the Virtual Machine Java.»

  When I try to open Minecraft SP, it won't let me open and there is a message saying:

  "Error: could not create the Virtual Machine Java.".
  Error: A fatal error has occurred. Program will exit. »
  How can I solve this problem?

  Hello

  What is the operating system installed on your computer?
   
  You can ask your question on the Minecraft forums for assistance. Check out the following link.
  http://www.minecraftforum.NET/viewforum.php?f=1002

• says device cannot create the folder

  have been on a cruise and tried to use their computer to download some photos but wouldn't work - now my camera says * cannot create the folder *-my computer can't see also photos even though my computer says there is only 3 GB of space left on a 16 GB of my camera card is an EOS 60 d - my card a San disk Ultra 30 Mb 10 16 GB

  It seems that the SD card is damaged. But it might be possible to recover the files. There are a lot of tips online on how to do it. You could start here... http://www.PCAdvisor.co.UK/how-to/storage/3481659/how-get-files-off-corrupt-SD-card/

  Good luck, I know how much vacation photos can mean.

• Cannot create the folder on the storage device

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  My flash player works well, but lately, I can't create a folder: it simply indicates: cannot create the folder?

  =====================================
  The dialog box you received usually indicates that there
  are too many files copied to the root directory of the
  flash drive.

  The solution is to remove one or more pictures and
  create new empty folders in their place... then move
  all the photos in the files... problem solved.