Cannot delete the thumbnails in the Organizer - error message: error deleting MediaI

Similar Questions

• cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer"

  cannot follow the links-error message said "this operation has been cancelled due to restrictions in effect on this computer

  Hello

  1 are. what links you referring?
  2 are. links to which application you referring?
  3. what browser do you use to open the links?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.

  http://support.Microsoft.com/kb/555375

• Cannot start the application - error code 8

  I'm running one of my own apps and I get this message:

  "Cannot start the application - error code 8.

  What is the error code 8? Where can I find a list of all error codes?

  Thanks in advance

  If you get error 8 or 13, and that everything you did is OK for this:

  -Uninstall all versions of your application

  -Restart the playbook

  -Install and run again

• Cannot open the title, errors have been encountered at that point.

  Cannot open the title, errors have been encountered at that point. bought 3 Google books give all 3, same problem, ordered same title on one of Kobo store and have the same problem. No problem with no DRM products or small book DRM I bought. With the help of windows 10.

  And what error message you get exactly?

• I have windows vista sp2. Windows cannot check the updates. error 80070490 KB968389. last updated on this error 23/10/09

  Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work.  I haves Windows Vista Home Premium SP2

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  A repair install is the usual solution of SFC/scannow does not work.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.

  Uninstall SP1

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  TaurArian [MVP] 2005-2010 - Update Services

• Windows cannot find the pictur error ~ 1.exe

  Windows cannot find pictur ~ 1.exe error, when you click ok then pictur ~ 2.exe cannot be found, and then click ok and imagev ~ 1.exe is not found. Happen sporatically throughout the day and the error messages inspire each other to end up with dozens of the same error message in the task bar. There is no pictur ~ 1.exe in msconfig. You need to determine how to make this error go away, or which is looking for this program, or to all the less determine where it is sought.

  Although I always think you should ask the help of expert antimalware, if you want to dig a little deeper on your own, here are 3 ideas, neither has no guarantee of success:

  1. take a look in the event viewer (start > run > eventvwr > OK) and see if error messages are displayed that give the name of the routine which tries to launch these exe files.

  2. learn to use the process monitor (and, perhaps, Process Explorer).  These are powerful tools, and the learning curve is a bit steep.  I can't help you here.  See the links in the sidebar or the other of the two pages linked above.  You can start by watching the video here.

  3. in association with the use of Process Monitor, create an exe file with the name that appears in your error message and save it in a folder that is in your path (for example, C:\Windows).  You can make a copy of an existing such as Notepad.exe exe file and rename it to picture ~ 1.exe or create an exe of your own by using a tool like ExeScript.  If you get real ambitious, you might learn a little windows script (for example, this tutorial) and have your exe file displays the name of the process that called it (again, to help you with this is beyond my skills).

  If you try one of these ideas and are able to go to the bottom of your problem, please post back with the details so that others (especially me) can learn.

• Cannot install the updates, error #0 x 80244004, please help

  Message bed site has encountered a problem, cannot display the page you are trying to view.  This happened after I installed the window update agent 7.4.7600.226 on June 21,2012. No updates since then.

  Please note that the version of WUA 7. 4. 7600. 226 is the old version that was supposed to be automatically updated on June 21 at the new and current WUA version 7. 6. 7600. 256

  The problem that you see now may occur when there is a version mismatch of the file with the Windows Update Agent files, which is a mixture of old files with the new files. This is due to an installation "or damaged."

  We would be able to help you better if you provided the windowsupdate.log file. Look for error codes or entries that are similar to the. -.

  Setup FATAL: error 0 x 80070005 when you try to open the file C:\WINDOWS\system32\wuapi.dll
  Installation FATAL: ProcessDelayedCopies failed: 0x80070005
  The FATAL service: failure difficulty starting the service registration: 0x80070005

  OR

  FATAL: update required for C:\WINDOWS\system32\wuweb.dll: target version = 7.4.7600. 226, required version = 7.6.7600. Installation of 256 * IsUpdateRequired = Yes

  Especially the wuweb.dll c:\windows\system32\wups.dll wups2.dll, c:\windows\system32\wuapi.dll files.

  You can try to re - register the WU files > http://support.microsoft.com/kb/958053

  Good luck and please let me know if problem solved.

• Cannot install the update error Code Ox800B010B

  Original title: cannot install the update

  Cannot install the update KB2686827

  Error Code Ox800B010B

  Hello

  1 have had any changes made on the computer before the show?

  2. What is the full and exact error message?

  3. when exactly you get the error message?

  4. the problem occurs for all the updates?

  Method 1:

  I suggest that return you the item and run Microsoft fix:

  Diagnose and automatically fix common problems with Windows Update

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Test the problem in clean boot mode.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

• Cannot start the computer (error hal.dll)

  Hi, I use Windows xp and when it loads, it says:
  Windows could not start because the following file is missing or corrupt:
  \System32\hal.dll
  Please reinstall a copy of the top of the queue.

  I have the original Windows xp cd and when I boot from the cd the blue screen comes up saying "Windows Setup".
  It automatically start doing something and then he stuck to "ACPI Plug & Play bus driver. Stucks HE there for a while and when it ends, I got an error message that says: "file acpi.sys cause unexpected error (32768) to 5964 in d:\xpsprtm\base\boot\setup\setup.c line."

  And when I press any button it just restarts the computer and it makes a loop in this way.
  And by the way, safe mode and all the other modes do not work, I get the same error for hal.dll, and I can't reach the office.

  Help, please!

  UPDATE: this time I received the error "acpi.sys file caused...". "now, I got that it's corrupted.

  It is extremely unlikely that the hal.dll file is missing or damaged.

  It is extremely likely that XP just cannot find the file.

  I have no idea what you have tried so far things - have you tried to do a repair installation?

  For this error, I first start in the XP Recovery Console (by pressing 'R' of your bootable CD) and run chkdsk /r on your system and then see how things appear after that, but try this notice from the Support Engineer and see how it works.

  If you can't get into the Recovery Console any CD you or you are not sure what type of bootable media you have, you should make a bootable CD from the Console of the Recovery XP (no XP media required) and do not forget what you have.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  If the system works, what do you think might have changed since the last time it did not work properly?

• Windows cannot update the 80004002 error code.

  OT: Windows Update.

  I continue to receive messages that Windows cannot update and the 80004002 error code but I put t understand where to go from there. Help!

  Moved from Vista to install, upgrade and activate Forum.

  http://Support2.Microsoft.com/kb/943144/en-AU

  Method 2: Register the Wups2.dll file

• Printer HP MFP M127fw cannot install the hardware error on xp sp3

  Hello

  I'm just impossible to install MFP M127fw on XP SP3, either by pilots or by using the installer Hp. whenever I try to install it says "an error has occurred during the installation of the unit", "the system cannot find the specified file. scanning functions are however works well.

  Prompt response will be highly appreciated

  Thank you

  solved. She needed old .net Framework 3.5, I had 4 in my pc.

  Thanks for the replies

• Tried all your suggestions, but still cannot fix the runtime error. How can I reinstall Windows 7 without losing everything?

  I tried a soft boot, it does not solve the problem.  I deleted all the redistributable files from Microsoft, and then restarted, I still have the same error message, even if I had deleted the files.  I reinstalled the updated files, the problem persists.  I'm frustrated and tired of this and now just want to know how to reinstall Windows 7 Premium Edition while preserving my other programs and files.

  If you reinstall, you will need to backup your data, do the reinstall, and then reinstall your programs.  And before that, you will need to have all the drivers from the manufacturer of your computer.  If you can restore to the factory settings, which may save you the hassle of dealing with drivers.

  When you got your system back as you, I invite you to buy an external hard drive, and a good backup 3rd party program. You can configure it to automatically do everything in time and frequency of your choice. 1.5 TB external hard drives is approximately $90 these days and a very good FREE backup program corresponds to the Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm . Who can make you save a lot of time and frustration, the next time something like this happens. Sooner or later, it happens to all computers for one reason or another.

  Good luck.

• Cannot create the pool, error of path for the VM folder

  I am using Add-AutomaticLinkedClonePool but running in the following error message:

  Add-AutomaticLinkedClonePool: PowershellService::AddAutomaticLinkedClonePool FAILED, error = not found file vm (or running) to the path: / Site/Desktops/PoolName. Could not find folder vm (or running) to the path: / Site/Desktops/PoolName

  I tried all of the following conditions:

  -VmFolderPath "/ Site/Home/office/PoolName.

  -VmFolderPath "/ Site/host/desktops / '.

  -VmFolderPath "/ Site/computers office/PoolName.

  No idea what I am doing wrong or where I should look next? I thought it might be a permissions problem, but it seems unlikely that the account I use must have full privileges. Incidentally, did you know that "Could not find file vm" gets 0 results on Google?

  As far as I know, you also have to include the files hidden in the access path.

  So if the Site is your data center, you should try

  -VmFolderPath "/ Site/vm/host/computers office/PoolName.

  I don't know how the Organization of your search folders, but the asumes above

  Data Center: Site

  Folder: Home

  File: desktop computers

  File: PoolName

• Cannot use the Organizer in Photoshop Elements and elements of first

  I am unable to use the Organizer in Photoshop Elements and Prime Minister. An error message is displayed, "the catalog could not be opened. An internal program error has occurred. »

  I tried to repair the catalog from a new catalogue and re-installed both programs, but the error persists.

  I use elements and first elements on Windows 8.1 V12.

  Any help yet get me would be appreciated.

  Thank you

  
  Colin

  Hello

  Thanks for the suggestion, but it made no difference.

  However, by trail and error, I found a solution to 99%.

  Right-click on the desktop, the icon of elements.

  Select Troubleshoot Compatibility.

  Select troubleshoot program

  Select a problem (I used the other)

  Select the Version of Windows (Windows 8 for me)

  Select the Test program

  If it works, which he did in my case, save the settings.

  This seems to have solved my problem, except that I now get an extra screen at the opening of the elements to allow the program to make changes to my computer. I can live with that.

  When I get time I will check if there is any Adobe or updates to Windows that will make this unnecessary step.

  I hope this helps other people with the same problem.

  Thanks for responding.

  Colin

• Captivate cannot open the file error

  VERY simple project generates the above error.

  Menu screen with buttons related to files F4V inserted as «drag videos»  The videos are large files and run in 1024 x 768. It records correctly after compression of time looong and does not open. This only happens after that I inserted slide videos and related buttons.

  The error says "cannot open file XXXXX. Ensure that this file is not open already etc... »

  I did a ton of times before and may not know what is happening.

  Thud...

  You try to insert videos 6 x 1 hour (6-800 meg) in a single project Captivate that ends up being 4.2 GB in size... and you wonder why Captivate has decided, that it can not open it?

  I think that you were right. The file is simply too big.