Cannot establish rules minus 1 PT in Illustrator

Similar Questions

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Safari cannot establish a connection to the server

  I have try this site to opoen: https://www.infragrad org I get this error msg

  Safari cannot establish a connection to 'www.infragard.org '.

  all other web browsers work with this site no message.

  Certificates? or what else?

  IM using worm 6.2.8 in Mt lion

  If Safari says cant Safari't establish a secure connection

  https://support.Apple.com/en-us/HT204937

  You have antivirus software installed?

  If so, uninstall it.

• Cannot establish a connection to the target red card Safari.

  I'm running OS X 10.8.5 using Safari 6.2.8.  I recently started getting an error when I try to log into the target red card - www.rcam.target.com.  The error message says that Safari cannot establish a secure connection.  How can I fix?

  Try another browser as a test.

  Firefox

• Cannot establish network connection. Messages on the icon alternate between "Acquiring network address" and "unplugged network cable.

  Original title: cannot establish a network connection

  Very well, a computer can connect to the internet. Another computer using the same modem cable and fixed connection of the router (for example using the port adapter, not wireless) Wireless does not connect. I suspect that there are has some settings somewhere that are not correct. Can you tell me how to understand where is the problem?

  Messages on the icon alternate between "Acquiring network address" and "unplugged network cable. When I run troubleshooting this is what I get:

  Diagnosis of IP Configuration
  Invalid IP address
  Info	Zero (0.0.0.0) detected IP address
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: reset the network connection
  action	Disabling the network card
  action	Activation of the card network
  Info	Successfully activated network adapter
  Info	Zero (0.0.0.0) detected IP address
  action	Repair Manual: Reboot modem
  Info	AutoNet address detected: 169.254.225.103
  action	Auto repair: renew the IP address
  action	Release the current IP address...
  action	Successfully published the current IP address
  action	Renew the IP address...
  error	Error to renew the IP address: the semaphore timeout period has expired.
  Info	AutoNet address detected: 169.254.225.103
  Info	Redirect the user to support call

  WinSock status
  Info	All base service provider entries are present in the Winsock Catalog.
  Info	Winsock Service providers strings are valid.
  Info	Entry provider MSAFD Tcpip [TCP/IP] passed the loopback communication test.
  Info	Entry provider MSAFD Tcpip [UDP/IP] passed the loopback communication test.
  Info	Entry provider RSVP UDP Service Provider managed the loopback communication test.
  Info	Entry provider RSVP TCP Service Provider passed the loopback communication test.
  Info	Connectivity is valid for all Winsock service providers.

  Diagnosis of network adapter
  Network location detection
  Info		Using the Internet connection at home
  Identification of network adapter
  Info	Network connection: name = Local 2, Device network connection = Intel(r) 82562V-2 10/100 Network Connection, MediaType = LAN, type = LAN
  Info

  Ethernet connection selected

  State of the network adapter

  Info

  The network connection status: connected

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn

  FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved

  warn

  HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved

  warn

  FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved

  warn

  HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved

  error

  Could not make an HTTP connection.

  error

  Could not make an HTTPS connection.

  error

  Could not make an FTP connection.

  I found the problem (s), even if I am always left with a few questions.

  During this process, I have disabled the firewall, but that did not help. However, I noticed 'tweaks' accessed via the tab 'Advanced' in 'Microsoft Firewall' which looked like, they must be checked in order to access the internet. I checked these and reintroduced the firewall. After I got things working, I unchecked them and things still worked so I obviously don't understand what these parameters.

  The solution:

  (1) I have to go straight from the modem cable to the computer. I can't have a cable modem, router wireless, computer, even if using hard wire, and even if this same configuration works with another computer. Also, I can't use a cable length to go from modem to the computer. So, it seems to have had a problem of cable length. Power problem? Only connected to this computer devices are the mouse, the keyboard and the Ethernet. Would not this be fixed with an upgrade of the power supply? Or is it due to the quality of the Ethernet hardware on the motherboard? It's a Dell Vostro 200.

  (2) in back and forth between configurations while following the problem, you must think to unplug the modem to reset between each configuration. You may have stumbled upon the solution, otherwise he's not shot. Also, I unplugged the cable from the modem when you reset data cable - do not know if it was necessary. I wanted to limit the degrees of freedom that I had a lot, as it was.

• I want to send a picture to my email (HOTMAIL) account and it says cannot establish a CMC session. What is c?

  need to send photos to my email account (hotmail).  says cannot establish a CMC session.  What is c?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Sorry I forgot to paste the link in the previous answer,

  Here's the link - Preview fails in muse

  Kind regards

  _Ankush

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• tried to download 30-day free trial of Premiere Pro and cannot establish what is happening, I see a 2014 version in my Apps folder but then when I click this, it says that my free trial has expired?

  tried to download 30-day free trial of Premiere Pro and cannot establish what is happening, I see a 2014 version in my Apps folder but then when I click this, it says that my free trial has expired?

  uninstall any cc that you installed including the application of cc office.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Install the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  Use the desktop application to install your trial and subscription programs.

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• REP-0178: RptSvr_SINS00018174_asinst_1 report server cannot establish Conn

  REP-0178: RptSvr_SINS00018174_asinst_1 report server cannot establish a connection.
  
  I installed Oracle Enterprise Manager 11 g Version 11.1.1.5.0 with the report server. I'm able to generate the report using the URL, but when I run a command to rwclient, I get this error.
  
  Help, please.

  Hi Fred,.

  This problem may occur when a bad rwclient is detected. Maybe the environment is not set properly before is called rwclient or rwclient.bat/rwclient.sh in "/ bin" is found and used, but it is only a model who, due to install authorized to create the valid rwclient.bat/rwclient.sh in the/config/reports/bin of (in fact, when the instance is configured actually).

  Try using the appropriate rwclient.bat/rwclient.sh, as he calls it rwclient.exe/rwclient after setting the environment. Is defined in the path of the /config/reports/bin directory before "/ bin" or specify the full path to rwclient.bat/rwclient.sh.

  Another possibility may be that the services have been started as root and so some log files have been created with the root user. There is no more write access to the files of newspapers of theses for basic user Oracle (who is the owner of the installation):
  $INSTANCE_HOME/diagnosis/newspapers/OHS/ohs1/access_log
  $INSTANCE_HOME/diagnostics/logs/ReportsToolsComponent/ReportsTools/runtime_diagnostic.log
  $INSTANCE_HOME/diagnostics/logs/ReportsToolsComponent/ReportsTools/zrclient_diagnostic.log

  If this is the case, try changing the following logs for user ORACLE owner (who is the owner of the installation):
  $INSTANCE_HOME/diagnosis/newspapers/OHS/ohs1/access_log
  $INSTANCE_HOME/diagnostics/logs/ReportsToolsComponent/ReportsTools/runtime_diagnostic.log
  $INSTANCE_HOME/diagnostics/logs/ReportsToolsComponent/ReportsTools/zrclient_diagnostic.log
  Restart the report server, and then run the rwclient.sh command to generate the reports.

  I hope this helps.

  Thank you
  Cree

• Why cannot establish the connection.

  Hello
  I'm new to weblogic and jdeveloper and now I try to deploy FOD (http://www.oracle.com/technology/products/jdev/samples/fod/index.html) on a Linux Server (Jdeveloper runs on the same server), but can't connect to localhost. When I check the connection to 127.0.0.1 on port 7101, he always complains that:
  
  JSR-160 LENGTH tests... failed.
  Cannot establish the connection.
  JSR-160 DomainRuntime... skipped tests.
  JSR - 88... skipped tests.
  JSR-88-LOCAL... skipped tests.
  JNDI... skipped tests.
  JSR-160 tests edit... skipped.
  Tests of HTTP... success.
  Test server MBeans model... skipped.
  
  but the Web site: http://127.0.0.1:7101 / console are available, anyone know why?
  Thank you.

  You are not able to establish a connection between jdev and the right of the server. If so, you must add an entry with the ip address and the host name of the server in the host C:\WINNT\system32\drivers\etc\hosts file.

• Cannot establish connection/local authorization on 6500's

  I have a need to allow a small group of level-15 users temporary access to several 6500

  switches (12.2 - 33 SXJ2 code execution), but do not want to provide the password secret enable that is used on the

  the rest of the network (over 1200 devices).  I tried to eliminate the AAA using the command "no aaa new-model", but I was told that I could not remove aaa while there are active sessions, and 'local connection' appeared more as an option for the vty lines.  So, I created a database of local user, called the 'support' that I used to replace the entry 'group' in sections of the authentication and authorization of our AAA config and connection on vty 0 4.

  [The username is given a privilege level of 15 with an individual password for authentication.  (e.g. username privilege 15 password 0 xxxxx jsmith)]

  I changed our AAA configuration to support the local login, but could not establish a "mode" (i.e. the prompt #) with any account.  I have

  can log on locally, but only to a normal "user mode" (i.e. > prompt).

  Here is the config current, modified, and sanitized for our AAA sections and line vty 0 4.  Please tell me what needs

  for the stay, and what to go.  Thank you!

  P.S.: for reasons of security, we want to track individual activity, so need the accounting AAA part to stay.

  AAA new-model
  AAA server Ganymede group + XXXXXX
  Server xxx.xxx.xxx.xxx
  Server xxx.xxx.xxx.xxx
  !
  enable AAA authentication login default group XXXXXX
  the AAA authentication enable default
  default AAA authorization exec XXXXXX group no
  AAA authorization commands 15 default authenticated if
  AAA authorization network default group XXXXXX no
  authorization AAA MLPPP-PPP network no
  MLPPP AAA authorization network no
  AAA accounting exec by default start-stop group XXXXXX
  AAA accounting command 15 default start-stop group XXXXXX
  AAA accounting network default start-stop group XXXXXX
  AAA accounting connection by default start-stop group XXXXXX
  AAA accounting system by default start-stop group XXXXXX
  !
  line vty 0 4
  access-class 75
  exec-timeout 15 0
  privilege level 0
  password 7 xxxxxxxxxxxxxxxxxxx
  entry ssh transport

  I'll have to probably more information until I can provide more help but since I see in the snip-it, you have configured aaa and your AAA server is a GANYMEDE server +. If this is the case you should keep in mind the following:

  1. If the authentication/authorization commands refer to the GANYMEDE group + then you will need to add a 'local' at the end of the command. This will allow local accounts to use when the AAA server is down/unavailable

  2. keep in mind that local users will ONLY be used when the AAA server is down/unavailable. You cannot have a mixture of the two

  Question, since you have a GANYMEDE server +, why don't you just create temporary accounts directly on the server GANYMEDE + accounts vs local? You can get very granular like that and don't allow some commands on some devices, during a certain time of day, etc...

  I hope this helps and thank you for the rating!

• Questions of ESXi 5.1 ISCSI--> cannot establish a network connection (continued)

  Hello world

  I had a problem there not too long ago (thread link below) where my ESXi hosts could not establish a connection with an IBM DS3500 on start up and "rescan", however their connectivity worked correctly without any problem after commissioning and when a "rescan" finished. We determined that the most likely cause was the unit IBM itself. However, I wasn't completely satisfied.

  In order to deepen the question and dismiss my guests being the problem, I created a unit ISCSI myself with two new hosts of ESXi 5.1 (version 1157734).

  ESXi signals that it cannot connect to the initiator ISCSI (network error) - but it can run virtual machines and browse data stores?

  The configuration is the following:

  Test environment:

  2 x ESXi 1157734 hosts

  1 x server Freenas ISCSI (ZFS R10)

  At the start of my ESXi hosts in the test environment, download the same error as our production environment. They also put on the same error message (in the event log) when I "rescan" map of the ISCSI software. However, once the scan is finished, I can't see any error message and everything continues as it should (Round robin, active active). I can get a brilliant flow also. It's as if the errors are almost... false positives?

  Example of the error message (test environment):

  Connection to the iSCSI target

  IQN.2011 - 03.org.example.istgt:iscsi on vmhba35

  @ vmk2 has failed. The iSCSI initiator couldn't

  establish a network connection to the target.

  error

  17/10/2013-08:33:35

  ESXi hosts are configured as follows:

  Test environment:

  • (ESXi hosts) Two network cards for ISCSI, one for VM traffic
    • NIC1: 10.20.20.2/24, NIC2: 10.30.30.2/24
  • (Freenas) Two network cards installed on the ISCSI device (dedicated to ISCSI traffic)
    • NIC1: 10.20.20.1/24, NIC2: 10.30.30.1/24
  • ESXi is set to round robin, which works properly (I can max on both ports at the same time)
  • Two VMKs are related to the ISCSI Software initiator and defined to dynamically discover the two ISCSI addresses
  • Unity of ISCSI and the hosts are not on the VLAN, the switch is dedicated to ISCSI traffic (However in the production, the two networks are separated by VLAN.) I removed the in the test environment to simplify everything)
  • The vSwitches (who hold a single VMK for ISCSI) are fixed:
    • "Promiscuous" mode: reject
    • Change of MAC address: accept
    • Forged passes: accept
    • The traffic shaping: disabled
    • No NIC teaming (obviously)
    • Each VMK inherits the settings of these

  Quick points:

  • My hosts use VMware approved NIC in my test environment. My production environment runs on full VMware hardware approved
  • Can I use ping of vmk join each each VMK ISCSI initiator
  • I can use the nc-z target_ip 3260 command to check connectivity to the port
  • The ISCSI test has two network adapters, each on 1 Gbps ports
    • I can get around 800mbps per port when copying lots of files (both ports are active)
    • I see no error in copying a large number of virtual machines around, or backup files
  • I only see errors on start up and "rescan".
  • I have two network adapters on each host ESXi dedicated for ISCSI. Each NETWORK card has a single VMK. A single mapped port on ISCSI, the other is mapped to port B (I used to have two VMKs by nic, but I removed that in order to simplify everything)
  • I have updated the firmware on our switch of production. No results
  • I've used 4 different switches in order to avoid a network problem. No results
  • I tested ESXi versions 5.0, 5.1 (799733 & 1157734), all have the same mistakes
  • The ISCSI ports are on different networks according to the VMware (I was told not to put on the same network VMKs)

  Any ideas? It's starting to drive me up the wall. Any help would be greatly appreciated

  I've seen several times in recent months and was beginning to think it is specific to the HP P2000 units because it's the only time wherever I saw him! I now believe that ESX/iSCSI rather than issues of driver or table.

  On my last install, I found that errors occur as soon as the table is connected, i.e. before any storage is displayed.

  Single host ESX, no guests. 2 Intel adapters to 2 HP past by dedicated HP P2000 1 GB table with all 8 wired ports.

  All roads are good, all lights are in the State expected.

  It did not affect the use of the storage in question to any site, so there has been no need / a momentum of any further investigation.

  B! 886y annoying however!

• Cannot change rules in Mail because the window is too short and not resizable

  When I create or edit a rule in the mail, the window is always too short, and it cuts the Actions section. I had this problem for a while, but there is a small bit visible (the wick down the line) and I could click to edit it, but now there's nothing I can click at all, that keeps me completely from the use of the rule. How can I fix or work around this problem?

  

  In the past, restarting Mail would bring this window to its full size. If this does not work for you, try this:

  Exit the Mail.

  In the Finder, select go, then navigate to the folder. Copy and paste the path below and click GO:

  ~/Library/containers/com. Apple.mail

  Move the entire folder com.apple.mail to the Recycle Bin, open Mail and test. If all goes well, you can empty the trash. You may need to re create your user settings.

  Some have said it works, and others say that it worked temporarily.