Cannot find the 'endpoint' with 'RemoteObject' property in Flex 3

Similar Questions

• Context: Target cannot find the node with id 33

  Hello

  In my qml file, I used the spreadsheet component. When you click the button, I tried to call the RPC function that calls the web service and according to the response from the service web I have to redirect to special qml. But while qml opening of the CPP, I get the following errors.

  libpng warning: iCCP: known incorrect sRGB profile
  Context: Failed to find target node with id  33
  

  For a moment, I am able to redirect to special qml but control returned to previous qml.

  I am not able to understand why this error came? When I run my application a day before it was working fine. When I reset the device and upgrade the operating system 10.2 I get this error.

  Here is my code in the PRC:

         QmlDocument *qml = QmlDocument::create("asset:///backgroundProcessImageFile.qml");
      qml->setContextProperty("RoamAssist", this);
      AbstractPane *root = qml->createRootObject();
      globalApp->setScene(root);
  

  Hey... my problem is solved...

  Insted to create the user interface using the sheet I just create new page and open it using NavigationPane.

  I still don't know if this issue is due to the component of the roadmap or due to the os version upgradation.

• Cannot find the boxes with inlay of text that have been converted from Quark

  Hi all.  It's kind of a weird one.  I have a lot of documents that have been converted to different versions of Quark to Indesign CS5.5.  I need to find all the text boxes that have a 0.139 text inset, which seems to be the default for text boxes that have been converted from Quark that have text box.  I'll find/replace, choose the command object and set my search criteria for spacing to insert at 0.139, leaving all other criteria being. He comes back and says no matches found.  If I create a new document and test it, it works fine.  Is there something that I am missing?  What is a "bug" due to a converted Quark document? I tried to uncheck all the attributes object except inset spacing without result.

  Doing this by hand is VERY time consuming as you might imagine.

  Any help would be greatly appreciated.

  The inDesign CS5.5, Version 7.5

  Mac OS x 10.6.8

  Bryan

  I think that your problem is with your conversion unit. 0,0139 inches do not match one point PostScript (it is equal to 1,0008 PostScript points). You should try the same method you were using, but rather try to enter "1 point" as your search query.

• Cannot find the web service endpoint

  Hello

  I did a .NET dll containing a Service reference built based on a WSDL file.

  In the VS2008 solution, I also have a console to test and everything works fine. I can create the client giving endpoint corresponding to an xml node in the app.config of the DLL file as a parameter.

  To work, the console executable must also have an app.config with the same endpoint definition. Otherwise, you have this error:

  The instance of the .NET class could not be found.
  Could not find the endpoint with name 'A400TMaintenanceSOAP' and 'ServiceReference400T.A400TMaintenance' contracts in the ServiceModel client configuration section. This may be because no configuration file was found for your application, or that no element of the endpoint associated with this name could be found in the customer element.

  Now when I call the TestStand dll, I have this error and I guess that's because the end point is not defined anywhere for TestStand. I tried to copy a file of SeqEdit.exe.config next to the SeqEdit.exe with the endpoint defined (like console in my c# project), but it did not work.

  Is there a way I can make it work so I can call the sequence of the editor dll?

  I've attached my dll project's app.config file (created automatically based on the WSDL file).

  Thanks for your time.

  -Mat

  I think you may have an error in your config file. The error message says: 'Could not find the endpoint with name 'A400TMaintenanceSOAP' and 'ServiceReference400T.A400TMaintenance' contracts in the ServiceModel client configuration section', but has your config file:

  
  "bindingConfiguration = contract"A400TMaintenanceSOAP"="A400T_Maintenance.A400TMaintenance"
  name = "A400TMaintenanceSOAP" / >

  So it seems that you have the contract bad name in one place or the other (very probably in the config file). I don't think that you need the Assembly decided in this case. I think you can use a configuration file for seqedit.exe like you had originally.

  Hope this helps,

  -Doug

• I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  I turned off the toolbars with display - toolbars-(cliquez sur) and now cannot find the display menu to restore their! Duh.

  This has happened

  Each time Firefox opened

  Press the Alt key to display the Menu bar, then open view > toolbars and select menu bar, so it has a check mark.

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• Spooler problem printing with Windows XP error: "error 2: the system cannot find the file specified."

  Original title: problem with Windows XP error print spooler

  My printer stopped working (after several years of use); the computer is not even grateful as being installed. Cannot reload the printing software. Tried to download the software of HP, but all that says there is a problem with the print spooler file: error 2: the system cannot find the specified file... (when I try to start it directly)

  Hello

  1. What is the brand and the model number of this computer?

  This problem may occur if a third-party printer driver or an installed third-party service prevents you from adding printers, or if the third-party printer driver or the third party service affects the functionality of a newly installed printer.

  To resolve this issue automatically, click the fix for this issue link in the article below. Then click Run now on printing problems and printing errors troubleshooting, then follow the steps in this wizard. If the problem persists, perform the rest of the procedure described in the article.

  You cannot add a printer and you receive Printer Spooler error messages in Windows XP
  http://support.Microsoft.com/kb/324757

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  I formatted and reinstalled xp to correct some problems and my multimedia audio and video vga drivers were lost. I do not have a CD with info and the Add Hardware Wizard cannot find the drivers. How can I fix it?

  You may be able to download the drivers from the web site of the manufacturer of the computer.

• Unable to backup (with Vista) - "the system cannot find the specified file. (0 x 80070002) »

  I cant get a backup on my external hard drive through back and Restore Center in Windows Vista.  I receive the Error Message - 'the system cannot find the file specified. (0 x 80070002) "I see my drive and it's working properly."  Backup starts and then typing mistake in the first minute.  I was using another backup program (WD Smartware) successfully in training so far, but had problems with an update. Then, it was suggested that I use the Windows program because it is obviously compatible with my computer.

  Thanks for the help,
  Rachel

  Hi Rachel,

  I suggest to try the steps suggested by Vincenzo Di Russo, from the following link and check if this can help:

  Error message when Vista backup (0 x 80070002)

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/error-message-during-vistas-backup-0x80070002/a17224b0-C53F-4AB2-9286-ddc47c683ae6

   

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry

  Let us know if it helps.

• Cannot find a volume with sufficient space for the extraction of the file, trying to watch a movie on netflix with Silverlight plug-in

  Install the Microsoft silverlight plug in. it's necessary to watch movies on my vista computer. When I try it is the message I get. Cannot find a volume with enough disk space for the file extraction. This is the message I get trying to watch a movie on netflix.

  Hi cardsharkha,

  I suggest you try the steps mentioned in the link below for cleaning broken Silverlight installation and check if the problem persists

  How to manually clean a broken Silverlight installation

  http://blogs.msdn.com/b/rpomeroy/archive/2008/06/10/how-to-manually-clean-up-a-bad-Silverlight-installation.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think

• After update of Windows 7 with the last KB 'Reliability' updates, wouldn't Boot: Boot mgr failed, cannot find the OS loader

  After that update of Windows 7 with 5 ~ updates which mainly provided increased reliability, these KBs wound up loader of Windows BOOT OS/corrupt the rupture.

  Root cause found:
  ----------------------
  Boot Manager cannot find the OS loader

  Repair action: repair of files
  Result: failed. Error code = 0xa<---- next="" repair,="" this="" changes="" to="">
  Time taken = 4206 ms

  Repair action: repair store boot configuration data
  Result: Has no = 0 error code x 490
  Time taken = 221 ms

  Repair action: System Restore
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 44444

  How to search through my hard drive to find updates KB which is the origin of my computer to lose its bootloader/OS and not starting?  What KB update is initially the charger operating system not found when everything worked very well, before these 5 updates.

  What are the solutions?

  Try the Forum updated; It includes questions of XP, Vista and Windows 7 update:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• "80070002" error the system cannot find the file specified with start.vbs

  Original title: Windows Script Host

  Script: C:\Program Files\PCDApp\start.vbs

  Line: 2

  Char: 1

  Error: The system cannot find the specified file.

  Code: 80070002

  Source: (null)

  1 first, update your AV program and run a full scan. Then download, install, update and run a full scan with malwarebytes(free). This will help you establish that his little likely to be malware related, or not.

  If each scan find and remove whatever it is, does the problem persists after that scans have completed?

  2 if so, try a clean boot. If the problem does not occur in 'clean boot' then follow the section "How to determine what is causing the problem by performing a clean boot" in an attempt to establish that generated the message.

  Do not leave your PC like the clean boot and return to a normal startup after your investigations.

  3. If the boot doesn't help, take a look at autoruns to see if that can locate which is turned on and generates the message.

• Cannot find a process with the name 'perl '.

  Hey all,.

  Tryign to configure the script in my dev environment and I receive the email ok, but does not get the report attached to the email... Here are the keys error I get with executing the script on the computer Windows 7 using PowerCLI 5.0... Thoughts?

  ___________________________________________________________________________

  Get-Process: cannot find a process with the name 'perl '. Process audit na
  me and call the cmdlet again.
  C:\scripts\report.ps1:3 char: 18
  + $pp = get-process < < < < perl
  + CategoryInfo: ObjectNotFound: (perl:String) [Get-Process], Pro
  cessCommandException
  + FullyQualifiedErrorId: NoProcessFoundForGivenName, Microsoft.PowerShell.
  Commands.GetProcessCommand

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:4 tank: 16
  + $pp.waitforexit < < < <)
  + CategoryInfo: InvalidOperation: (waitforexit:String)], Runti
  meException
  + FullyQualifiedErrorId: InvokeMethodOnNull

  New-Object: Exception calling ".ctor' with '1' or the arguments:"Could not find fi.
  the "C:\scripts\vmware_health_check20110912.html". »
  C:\scripts\report.ps1:8 char: 18
  + $att = new-object < < < < Net.Mail.Attachment ($file)
  + CategoryInfo: InvalidOperation: (:)) [New-Object], MethodInvoca)
  tionException
  + FullyQualifiedErrorId: ConstructorInvokedThrowException, Microsoft.Power
  Shell.Commands.NewObjectCommand

  Exception by calling 'Add' with '1' arguments: "value cannot be null."
  ' Parameter name: agenda.
  C:\scripts\report.ps1:14 char: 21
  + $msg. Attachments.Add < < < < ($att)
  + CategoryInfo: NotSpecified: (:)) [], MethodInvocationException)
  + FullyQualifiedErrorId: DotNetMethodException

  You can not call a method on a null value expression.
  C:\scripts\report.ps1:16 char: 13
  + $att. Have < < < <)
  + CategoryInfo: InvalidOperation: (available: String) [], RuntimeEx
  reception
  + FullyQualifiedErrorId: InvokeMethodOnNull

  Remove-Item: can not find the path "C:\scripts\vmware_health_check20110912.html" be
  cause, that there is not.
  C:\scripts\report.ps1:17 tank: 12
  + Remove-Item < < < < C:\scripts\vmware_health_check$dt.html
  + CategoryInfo: ObjectNotFound: (C:\scripts\vmwa...ck20110912.ht
  ml:String) [Remove-Item], ItemNotFoundException
  + FullyQualifiedErrorId: PathNotFound, Microsoft.PowerShell.Commands.Remov
  eItemCommand

  The script uses the Perl API and not the PowerShell.  So the last SDK Perl install and be sure that your backup script as *.pl rather than *.ps1

  Concerning
  Joerg

• Subinacl/leader has the error "the system cannot find the file specified."

  D:\>Subinacl/file 'C:\Windows\system32\themeservice.dll' /setowner = administrators/Grant = Administrators = F

  C:\Windows\system32\themeservice.dll - error from CreateFile: 2 the system cannot find the specified file.

  Elapsed time: 00 00:00:00
  Fact: 1, 0, 1 update failed, syntax errors 0
  Last fact: C:\Windows\system32\themeservice.dll
  Last failure: C:\Windows\system32\themeservice.dll - error from CreateFile: 2, the system cannot find the specified file.

  D:\>dir "C:\Windows\system32\themeservice.dll".
  Volume in drive C has no label.
  Volume serial number is 0c 01 37 - 5 c

  Directory of C:\Windows\system32

  May 12, 2015 themeservice.dll 44 544 13:51
  1 file (s) 44 544 bytes
  0 11,505,455,104 dir bytes free

  What's wrong?

  The two commands (subinacl & Icacls) will work perfectly here, but they omitted to apply permissions

  

  Reason: The Trusted Installer is the owner of the file.  In my tests SubInACL could pull off not property of the Trusted Installer, or it could change the permissions, even when the property had been taken.

  You can enter property with TakeOwn and changing permissions with icacls.

  John

• Cannot find the specified dynamic type VirtualEthernetCardDistributedVirtualPortBackingInfo

  Hi all

  I send the SOAP message to vcenter (business listing API 5.0 Vsphere)

  just to change portgroup on vNIC. change portgroup on vDS

  but I get an error

  Table
  (
  [faultcode] = > ServerFaultCode
  [faultstring] = >
  Cannot find the specified dynamic type VirtualEthernetCardDistributedVirtualPortBackingInfo

  during the DataObject analysis serialized type vim.vm.device.VirtualDevice.BackingInfo
  on line 36, column 5

  When parsing 'storage' of the statics of the property, type VirtualDeviceBackingInfo

  during the DataObject analysis serialized type vim.vm.device.VirtualE1000
  on line 27, column 12

  in the "peripheral" static property analysis, type VirtualDevice

  during the DataObject analysis serialized type vim.vm.device.VirtualDeviceSpec
  line 24, column 10

  during the "deviceChange" of static property analysis, type ArrayOfVirtualDeviceConfigSpec

  during the DataObject analysis serialized type vim.vm.ConfigSpec
  on line 18, column 8

  during the "config" static property analysis, type VirtualMachineConfigSpec

  during the DataObject analysis serialized type vim.vm.CloneSpec
  in line 8, column 6

  during the analysis of the CloneVM_Task method call information
  on line 4, column 4

  during the analysis of body SOAP
  on line 3, column 2

  When parsing of SOAP envelope
  on line 1, column 0

  When parsing the HTTP request for clone method
  object of type vim. VirtualMachine
  on line 1, column 0
  [detail] = > Array
  (
  [InvalidRequestFault] = >
  )

  )

  I want to ask what I have wrong or there is a problem with the API

  pls message SOPA and help me.

  Thank you very much

  Also, here is an article on the SOAPAction values:

  http://KB.VMware.com/kb/1033447