Cannot generate any form in oracle r12

Similar Questions

• Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.

  I guess its text fields are the date data type.

• Cannot run any form of convenience store/even Viewer with Windows 7

  Original title: problems with any form of convenience store / observer of events in Windows 7

  Hi, lately I had problems (as the title indicates current) with any form of troubleshooting as well as Event Viewer on the laptop of my father he made the end of 2013.

  I tried researching the issue, but couldn't find answers to the problem, however, was not able to find a solution for this particular combination of questions.

  I ran the SFC system several times, he can't find anything nor does it fix anything. I also tried to run the Microsoft Fix It utilities, but those who do run either.

  Each troubleshooting tool does the following:

  

  As you can see there the error 0x800736B1 code, but when I tried this search, the only solutions had to do with the programs that deal with photos / images.

  Then I tried to research that the context was limited, but none of the errors found during the search has the same error code.

  So the question with Event Viewer, is that it does the following:
  

  I tried all the solutions I could find for this as well with zero improvement.

  If I could get help to these questions and to get this sorted out for my dad, it would be greatly appreciated. Thank you.

  Back up the data before a repair installation of Windows and see the article:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows
  Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  I hope the information is useful.

• Cannot detect any form of internet!

  My screen became suddenly empty and began to check through all my files and programs. Everything seems fine after that except that I can not connect to form any Internet wireless or with a lan cable. How to solve this?

  Hello

  There can be several causes for Internet does not connect.

  1. what exactly happens when you try to connect to the Internet?

  2. you get any error message?

  I would say to you to follow the steps provided and an update on the State of the question.

  Wi - Fi and in Windows network connection issues:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• generator of forms of Oracle 11 g on linux

  I OPENED A FMB WITH FORMS BUILDER 11G ON SUSE LINUX, BUT PROGRAM (PROCEDURES, FUNCTIONS AND TRIGGERS) UNITS ARE CORRUPT.
  SOMEONE KNOWS SOMETHING ABOUT THIS PROBLEM?
  
  Published by: user2297343 on 30 Οκτ 2009 06:22 πμ

  Access metalink? If so read the note 969422.1 as it sounds exactly like your problem.

  Basically, it's a problem with the NLS_LANGUAGE you use (based on some Cyrillic characters in your text "edited by" I guess you are using a Russian nls_language).

  also, please turn off your caps lock ;)

  see you soon

• FRM-40010: cannot read the form under Linux

  Hello
  
  During the race, the f60desm gives error below command
  
  FRM-40010: cannot read the form /d01/oracle/prodappl/au/11.5.0/forms/US/PROJECT.fmx
  
  I've defined the following path
  
  (1) customPROD_A.env
  
  # Custom top PROJECT #.
  
  PROJECT_TOP=/D01/Oracle/prodappl/project/11.5.0
  export PROJECT_TOP
  
  (2) APPSPROD_A.env
  
  CustomFile=/D01/Oracle/prodappl/customPROD_A.env
  If [f $customfile]; then
  . /D01/Oracle/prodappl/customPROD_A.env
  FI
  . /D01/Oracle/prodora/8.0.6/PROD_A.env
  . /D01/Oracle/prodappl/PROD_A.env
  
  
  Environment:
  
  Oracle Applications: 11.5.10.2
  RDBMS: 11.2.0.1.0
  OS: OEL5
  
  
  Please help solve the problem.
  
  Thank you
  Concerning
  GSM

  Hello

  How to do the same thing in OEL5.

  The above applies to Windows (if you want to open the file on the Windows client machine fmb and compile - generate the fmx file). If you are on Linux, you need not to do the same thing, just the env file source application and compile the form (question "echo $FORMS60_PATH" to make sure that all the relevant directories are in the path).

  I created the directory of the root OEL5 ABC & copied all the pll, TEMPLATE.fmb & APPSTAND.fmb files in $AU_TOP/resources directory ABC but how to add ABC to FORMS_PATH in OEL5?

  As mentioned above, it is not required on Linux. However, if you want to add the ABC directory you issue:

  $ export FORMS_PATH =: $PATH

  Thank you
  Hussein

• generate the xml to oracle table

  Hello
  
  I want to generate xml form an oracle table and using the sql express oracle developer 10 g, forler xdk is decompressed also under folder oracle express, still getting the following error: code used
  

  var g_clob clob;
  
   declare
       l_ctx  dbms_xmlquery.ctxHandle;
       l_clob clob;
      begin
        l_ctx := dbms_xmlquery.newContext('select * from scott.emp');
        dbms_lob.createtemporary(:g_clob,true,dbms_lob.session);
        :g_clob := dbms_xmlquery.getXml(l_ctx);
      end;
      /

  ORA-06550: line 2, column 14:
  PLS-00201: identifier ' DBMS_XMLQUERY. CTXHANDLE' must be declared
  
  Thanks in advance

  Hello

  DBMS_XMLQUERY is a wrapper for the methods in the Java class "oracle.xml.sql.query.OracleXMLStaticQuery".
  The problem is that Oracle 10 g XE is not a JAVA virtual machine, you can not use this package.

  Use DBMS_XMLGEN instead, it provides similar functionality and is more effective (C-based):

  SQL> var g_clob clob
  SQL> DECLARE
    2    l_ctx    dbms_xmlgen.ctxHandle;
    3  BEGIN
    4    l_ctx := dbms_xmlgen.newContext('select * from scott.emp');
    5    :g_clob := dbms_xmlgen.getXML(l_ctx);
    6    dbms_xmlgen.closeContext(l_ctx);
    7  END;
    8  /
  
  PL/SQL procedure successfully completed.
  
  SQL> set long 5000
  SQL> set pages 1000
  SQL> print g_clob
  
  G_CLOB
  --------------------------------------------------------------------------------
  
  
   
    7369
    SMITH
    CLERK
    7902
    17/12/80
    800
    20
   
   
    7499
    ALLEN
    SALESMAN
    7698
    20/02/81
    1600
    300
    30
   
   
    7521
    WARD
    SALESMAN
    7698
    22/02/81
    1250
    500
    30
   
   
    7566
    JONES
    MANAGER
    7839
    02/04/81
    2975
    20
   
   
    7654
    MARTIN
    SALESMAN
    7698
    28/09/81
    1250
    1400
    30
   
   
    7698
    BLAKE
    MANAGER
    7839
    01/05/81
    2850
    30
   
   
    7782
    CLARK
    MANAGER
    7839
    09/06/81
    2450
    10
   
   
    7839
    KING
    PRESIDENT
    17/11/81
    5000
    10
   
   
    7844
    TURNER
    SALESMAN
    7698
    08/09/81
    1500
    0
    30
   
   
    7900
    JAMES
    CLERK
    7698
    03/12/81
    950
    30
   
   
    7902
    FORD
    ANALYST
    7566
    03/12/81
    3000
    20
   
   
    7934
    MILLER
    CLERK
    7782
    23/01/82
    1300
    10
   
  
  

  Or, using the SQL/XML functions:

  SELECT XMLElement("ROWSET",
           XMLAgg(
             XMLElement("ROW",
               XMLForest(empno, ename, job, mgr, hiredate, sal, comm, deptno)
             )
           )
         ).getClobVal()
  FROM scott.emp
  ;
  

• forms cannot be opened after patched QSP R12

  Hi all
  
  Please help on below question.
  
  forms cannot be opened after patched QSP R12.
  all services are up and runnin.
  
  E - biz: 12.0.6
  DB: 11.2.0.2
  
  Thanks in advance.
  
  
  Concerning
  Kumar

  Hi Kumar,

  Caused by: oracle.classloader.util.AnnotatedClassNotFoundException

  Please compile JSP files manually according to the guidelines of these documents and then check.

  Blank Page Accessing R12 - ' lack of class: _RF' in OACore application.log [467562.1 ID]
  R12 - logon does not work, no error message is displayed [435550.1 ID]
  Oracle Application Server diagnostic tools and logs in Applications Release 12 [454178.1 ID] - compiled JSP files are deleted or corrupted

  Thank you
  Hussein

• High CPU on the client computer, generating application running on oracle forms 11 GR 2

  Hi guys,.

  Our environment:

  Server:

  OS: windows 2008r2

  software: form of Oracle 11 GR 2

  client machine : jre1.8.0_45

  Client has 100% cpu on the computer of the user when you run the application.

  application has a menu customized with custom icons.

  When I run procexp on the client machine I see high CPU by
  
  

  -----------------------------------------------------------------------------------------------------------------------------------------

  "C:\Program Files (x86)\Java\jre1.8.0_45\bin\jp2launcher.exe '-fix jre - plugin -" C:\Program Files (x86)\Java\jre1.8.0_45 ' - LURfX2p2bV9sYXVuY2hlZD03OTQ1NjY3MDQ0MgAtRF9fYXBwbGV0X2xhdW5jaGVkPTc5NDU2NTYxODIyAC1Ec3VuLmF3dC53YXJtdXA9dHJ1ZQAtRGphdmEuc2VjdXJpdHkubWFuYWdlcgA = vma - my cmVhZF9waXBlX25hbWU9anBpMl9waWQ4NTY0X3BpcGUzLHdyaXRlX3BpcGVfbmFtZT1qcGkyX3BpZDg1NjRfcGlwZTQA ").

  ---------------------------------------------------------------------------------------------------------------------------------------------------

  Help, please

  Thank you, Mary

  What format is your custom icons? Maybe take a single JPG and have a testcase?

  (I just thought that I hope you are not animated GIF, that could be a problem)

• Any process in oracle between soft Parse Vs hard Parse?

  Hello Experts/gurus

  Call for analysis is different from the analysis!

  Is there any process in oracle between softParse Vs HardParse?

  Oracle search the shared pool and finds the same SQL statement.

  However, Oracle needs check if it can be reused. If Oracle cannot reuse, Oracle will define a child cursor, optimize, and generate the SQL plan.

  Source: http://dbspeed.com/case_study/sql_with_high_parses.html

  > Situation if I version count is greater than 1, it's this closely with the cursor of the child?

  Yes.  An identical sql statement was found in the shared pool, but it could not be used for a reason, so a child has been created.

  You can find out why the first statement couldn't be used looking in v$ sql_shared_cursor (using the sql_id).  There are a bunch of flags that indicate the reasons.

• icons appears in the forms of oracle.

  Hi all
  
  I try to display icons on form of Oracle 10 g. I just brought over these forms from another system, and I try to display icons as next record, Polish form etc...
  
  I did the following steps so far. The icons still are not displayed. Appreciate any help.
  
  
  Created a folder in D:\oracle\oracleas\forms\java called icons.
  
  Copy all the files, gif and jpeg in icons. Then created a jar file.
  
  D:\oracle\oracleas\forms\java > jar - cvf my_icons.jar icons
  
  He created the jar file in the same directory D:\oracle\oracleas\forms\java
  
  Also the changes made to these files, as shown below each file.
  
  
  Forms.conf
  
  AliasMatch ^ / forms/icons / (. *) "D:\oracle\oracleas\forms\java\icons/$1".
  
  Registry.dat
  
  default.icons.IconPath = http://servername: 7778/forms/java /.
  
  
  formweb.cfg
  
  # Is the applet parameter.
  CodeBase = / forms/java
  # Is the applet parameter.
  imageBase codebase =
  
  # Forms applet archive for JInitiator
  archive_jini = frmall_jinit.jar, frmMain.jar, frmjdapi.jar, my_icons.jar
  
  # Forms applet archive definition for other clients (Sun Java Plugin, Viewer applets, etc.)
  Archive = frmall.jar, frmMain.jar, frmjdapi.jar, my_icons.jar
  
  
  Also added this line under orion-web-app in the Web.XML - orion.
  
  < Directory virtual-path virtual = "" / icons "real-path ="D:\oracle\oracleas\forms\java\icons"/ >"
  
  
  Restarted the forms OC4J server after that any changes.

  To test your configuration, you can try to build a URL:

  i.e.
  http://localhost:8889/forms/frmservlet/icons/IconName.gif

  Does show the icon?

  If this does not work, I would try re - generate the my_icons.jar file, but instead of going directly into the forms/java/icons folder, copy the folder of icons in the root, i.e. c:\icons directory and run the command in the container the icons folder, then redeploy the my_icons.jar file.

  Then try again with the URL if the URL does not work, you still have configuration problems.

  PS: Don't forget to clear the cache of your browser so that the new .jar file is loaded?

  In addition:
  ========
  Remove the changes made to the forms.conf and orion - web.xml, they are only needed if the icons are
  not stored in a .jar file.

  Forms.conf

  AliasMatch ^ / forms/icons / (. *) "D:\oracle\oracleas\forms\java\icons/$1".

  Orion - web.xml

  Published by: Rodolfo Ferrari on June 17, 2009 18:14

  To double check your configuration, follow the steps in metalink note 232413.1 - how to deploy iconic Images via a JAR file in Forms 9i/10 g?

  Published by: Rodolfo Ferrari on June 17, 2009 19:19

  Published by: Rodolfo Ferrari on June 17, 2009 19:24

• I have a second hand on windows vista pc and it has only 1 login account and I have no password or any form of disks, how can I access windows in order to set up my own account

  I have a second hand on windows vista pc and he olny has 1 connection acount and I have no password or any form of records, how do I access windows in order to set up my own account / / / is no vista, discs or backup disks you not how I can get in using the computer

  http://support.Microsoft.com/default.aspx/KB/189126

  "Microsoft's strategy concerning lost or forgotten passwords"

  Microsoft cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• -&gt; Client_OLE2.create_obj ('Excel.Application') when he called by form of Oracle for the second time to desnt work

  
  Here is the code that is written in "WHEN-BUTTON-PRESSED" trigger of a button in the form of Oracle

  Questions:

  1. for the first time in the excel sheet data loaded into record block.

  2. If I once again to open the screen and try to import another excel file the record block appers to be empty and no error thrown

  Comment:

  1. second time when I try to download the excel sheet, the code ends in "Client_OLE2.create_obj('Excel.Application')" and not further progress (on track by putting the message in the code)

  Code:

  DECLARE
  application Client_OLE2. Obj_Type;
  Client_OLE2 workbooks. Obj_Type;
  workbook Client_OLE2. Obj_Type;
  Client_OLE2 spreadsheets. Obj_Type;
  worksheet Client_OLE2. Obj_Type;
  worksheet2 Client_OLE2. Obj_Type;
  cell Client_OLE2. OBJ_TYPE;
  Client_OLE2 args. OBJ_TYPE;
  cell_value varchar2 (100);
  num_wrkshts NUMBER;
  wksht_name VARCHAR2 (250);
  EOD Boolean: = false;
  j integer: = 1;
  v_fName VARCHAR2 (250);
  BEGIN
  -Get the name of the file to open
  -v_fName: = "D:\MyDevelopment\Forms\Samples\WebUtil\Read_Excel\planets3.xls";
  v_fName: = WebUtil_File.File_Open_Dialog)
  directory_name = > "C:\". »
  -, file_name = > Get_Form_Property (:System.Current_form, Form_Name) |'. XLS
  , File_Filter = > null
  , Title = > 'Select customer filename to open.'
  );

  IF (v_fName IS NOT NULL) THEN
  
  -The following sets a communication with the excel worksheet
  -- --------------------------------------------------------------
  -Open the OLE application
  application: = Client_OLE2.create_obj ('Excel.Application');
  -Keep the hidden application
  Client_OLE2.set_property (application, 'Visible ','false ');
  
  workbooks: = Client_OLE2. Get_Obj_Property (application "Filing cabinets");
  args: = Client_OLE2. CREATE_ARGLIST;
  
  -Open the selected file
  -- ----------------------
  Client_OLE2.add_arg (args, v_fName);
  workbook: = Client_OLE2. GET_OBJ_PROPERTY (Workbooks, 'Open', args);
  Client_OLE2.destroy_arglist (args);
  
  worksheets: = Client_OLE2. GET_OBJ_PROPERTY (workbook, 'Worksheets');
  
  -Get the number of spreadsheets
  -- ------------------------
  num_wrkshts: = Client_OLE2. GET_NUM_PROPERTY (worksheets, 'Count');
  worksheet: = Client_OLE2. GET_OBJ_PROPERTY (application, 'activesheet');
  
  -Go to the first record
  go_block ('planets');
  premier_enregistrement;
  
  loop
  If: system.record_status <>'NEW' then
  create_record;
  end if;
  
  When the exit NEM;
  
  for 1.3 k loop - 3 frames / record
  args: = Client_OLE2.create_arglist;
  Client_OLE2.add_arg (args, j);
  Client_OLE2.add_arg (args, k);
  cell: = Client_OLE2.get_obj_property (spreadsheet calculation, 'Cells', args);
  Client_OLE2.destroy_arglist (args);
  cell_value: = Client_OLE2.get_char_property (cell, 'Value');
  
  If upper (cell_value) = "NEM" then
  Nem: = true;
  Message ('end of data');
  "exit";
  end if;
  
  -Could be done in this way also-->
  
  / * If k = 1 then
  : dept.deptno: = cell_value;
  end if;
  
  If k = 2 then
  : dept.dname: = cell_value;
  end if;
  
  If k = 3 then
  : dept.loc: = cell_value;
  end if;
  */
  
  -Less code in this way - >
  Copy (cell_value, name_in ('system.cursor_item'));
  next_item;
  
  end loop; -for
  
  j: = j + 1;
  end loop;-main loop
  
  -Release the handles object Client_OLE2
  IF (cell IS NOT NULL) THEN
  Client_OLE2.release_obj (cell);
  END IF;
  IF (spreadsheet IS NOT NULL) THEN
  Client_OLE2.release_obj (Worksheet);
  END IF;
  IF (spreadsheets IS NOT NULL) THEN
  Client_OLE2.release_obj (Worksheets);
  END IF;
  IF (worksheet2 IS NOT NULL) THEN
  Client_OLE2.release_obj (worksheet2);
  END IF;
  IF (workbook IS NOT NULL) THEN
  Client_OLE2.release_obj (Workbook);
  END IF;
  IF (workbooks IS NOT NULL) THEN
  Client_OLE2.release_obj (Workbooks);
  END IF;
  Client_OLE2. Invoke (application, 'Quit');
  Client_OLE2.release_obj (application);
  ON THE OTHER
  Message ("no file selected.'");
  message(' ');
  RAISE Form_Trigger_Failure;
  END IF;
  END;

  Any advice will be appreciated...

  Thank you!!!

  Hello

  personally, I release the cell object as soon as the value is written in a variable and not in a procedure that closes the file. Note that there are many cells read (so you should relase each cell individually).

  The publication of the application is such:

  Procedure CloseApplication is

  Begin

  CLIENT_ole2.release_obj (Workbook);

  CLIENT_ole2.release_obj (Workbooks);

  CLIENT_ole2. Invoke (application, 'Quit');

  CLIENT_ole2.release_obj (application);

  End CloseApplication;

  Greetings,

  SIM

• Cannot generate the thumbnail on all widgets (including integrated)

  My installation of Muse (2014.2, OSX Mavericks) gives me a "cannot generate the thumbnail" error one no matter what widget I place (including built-in ones, my own and those that I downloaded from the site of Muse documentation on github).

  So far, I have tried many things including restart Muse, reboot the machine, turn off all browsers in the background, but I can not change this behavior.

  This problem is specific to the machine, I'm getting because the same site on the exact version on another machine (os x mavericks) does not give me this behavior.

  Any help is appreciated.

  Thank you

  
  A.

  Solved. While this problem appeared machine related, it wasn't - it turns out that I had added a js file in my page header that was missing.

  So, the moral of this story is that if you do not see the "unable to generate thumbnail error", look at all the custom HTML you added to the site. Errors in the HTML elements may appear in the wrong place.

  A.

• Integrated form of oracle question

  Hello
  
  We are currently working on a solution that integrates an existing forms(11g) oracle application in a container for jsp/adf and communicates via javascript with different elements on the page. I recently hit a problem when launching the application. Everything starts well, but when the departures of applet, I get an error FRM - 92190 Javascript is impossible to evaluate the expression. We had the fine for the month's work, but something has changed and I don't know what. I followed the problem down to the forms_ie.js that performs the following operations: (fails on the second line as it never finds an element called "form_plugin_info")

  /*
  ** FILE: forms_ie.js
  **
  ** This java script file gets included in the Forms Servlet template htm
  ** file basejpi.htm and webutil template htm file webutiljpi.htm.
  **
  ** Users who have customized replacements for these template htm files
  ** (basejpi.htm and webutiljpi.htm) should
  ** modify their customized template htm files and include this java script
  ** (similiar to the default template files).
  */
  
  var plugin_info = document.getElementById("forms_plugin_info");
  var jversion = plugin_info.getAttribute("plug_ver");
  var jcodebase = plugin_info.getAttribute("appcodebase");
  var jwidth = plugin_info.getAttribute("appwidth");
  var jheight = plugin_info.getAttribute("appheight");
  var name = plugin_info.getAttribute("appname");
  
  document.write('<object classid="' + jversion + '"\n');
  document.write('codebase="' + jcodebase + '"\n');
  document.write('WIDTH="' + jwidth + '"\n');
  document.write('HEIGHT="' + jheight + '"\n');
  document.write('HSPACE="0"\n');
  document.write('VSPACE="0"\n');
  document.write('ID="' + name + '" MAYSCRIPT>\n');

  This is the code for the creation of the applet in the page
  

  <OBJECT classid="clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA"
          codebase="http://java.sun.com/update/1.6.0/jinstall-6u10-windows-i586.cab#Version=1,6,0,39"
          WIDTH="1024"
          HEIGHT="768"
          HSPACE="0"
          VSPACE="0"
          ID="forms_applet">
          <SCRIPT LANGUAGE="JavaScript" SRC="http://192.168.13.152:9001/forms/frmjscript/forms_ie.js"></SCRIPT> 
          <PARAM NAME="TYPE"       VALUE="application/x-java-applet;jpi-version=1.6.0"/>
          <PARAM NAME="CODEBASE"   VALUE="http://192.168.13.152:9001/forms/java"/>
          <PARAM NAME="CODE"       VALUE="oracle.forms.engine.Main" />
          <PARAM NAME="ARCHIVE"    VALUE="frmall.jar,locus_forms.jar,icons.jar,frmwebutil.jar,jacob.jar" />
          <PARAM NAME="serverURL" VALUE="http://192.168.13.152:9001/forms/lservlet?ifcfs=http://192.168.13.152:9001/forms/frmservlet?config=migrate&FORM=loginstart&ifsessid=formsapp.125&acceptLanguage=en-US,en;q=0.8"/>
          <PARAM NAME="networkRetries" VALUE="0"/>
          <PARAM NAME="serverArgs"
                 VALUE="escapeParams=true module=loginstart userid=  debug=no host= port= term=C:\Oracle\Middleware\asinst_1\config\FormsComponent\forms\fmrwebwcs.res"/>
          <PARAM NAME="separateFrame" VALUE="false"/>
          <PARAM NAME="splashScreen"  VALUE=""/>
          <PARAM NAME="background"  VALUE=""/>
          <PARAM NAME="lookAndFeel"  VALUE="oracle"/>
          <PARAM NAME="colorScheme"  VALUE="teal"/>
          <PARAM NAME="serverApp" VALUE="default"/>
          <PARAM NAME="logo" VALUE=""/>
          <PARAM NAME="imageBase" VALUE="codebase"/>
          <PARAM NAME="formsMessageListener" VALUE=""/>
          <PARAM NAME="recordFileName" VALUE=""/>
          <PARAM NAME="EndUserMonitoringEnabled" VALUE="false"/>
          <PARAM NAME="EndUserMonitoringURL" VALUE=""/>
          <PARAM NAME="heartBeat" VALUE=""/>
          <PARAM NAME="MaxEventWait" VALUE=""/>
          <PARAM NAME="allowAlertClipboard" VALUE="true"/>
          <PARAM NAME="disableValidateClipboard" VALUE="false"/>
          <PARAM NAME="enableJavascriptEvent" VALUE="true"/>
          <PARAM NAME="MAYSCRIPT" VALUE="true"/>
          <PARAM NAME="digitSubstitution" VALUE="context"/>
          <PARAM NAME="legacy_lifecycle" VALUE="false"/>
          <PARAM NAME="JavaScriptBlocksHeartBeat" VALUE="false"/>
          <PARAM NAME="highContrast" VALUE="false"/>
          <PARAM NAME="disableMDIScrollbars" VALUE=""/>
          <PARAM NAME="clientDPI" VALUE=""/>
          <!-- Params specific to webutil -->
          <PARAM NAME="WebUtilLogging" VALUE="on"/>
          <PARAM NAME="WebUtilLoggingDetail" VALUE="normal"/>
          <PARAM NAME="WebUtilErrorMode" VALUE="Alert"/>
          <PARAM NAME="WebUtilDispatchMonitorInterval" VALUE="5"/>
          <PARAM NAME="WebUtilTrustInternal" VALUE="true"/>
          <PARAM NAME="WebUtilMaxTransferSize" VALUE="1048576"/>
          <PARAM name="applet_stop_timeout" value="800"/>
  <COMMENT>
  <EMBED  id="forms_applet"
          SRC="" PLUGINSPAGE="http://javadl.sun.com/webapps/download/GetFile/1.6.0_10-b33/windows-i586/xpiinstall.exe"
          CODE="forms_applet"
          TYPE="application/x-java-applet"
          java_codebase="http://192.168.13.152:9001/forms/java"
          java_code="oracle.forms.engine.Main"
          java_archive="frmall.jar,locus_forms.jar,icons.jar,frmwebutil.jar,jacob.jar"
          WIDTH="1024"
          HEIGHT="768"
          HSPACE="0"
          VSPACE="0"
          NAME="forms_applet"
          serverURL="http://192.168.13.152:9001/forms/lservlet?ifcfs=http://192.168.13.152:9001/forms/frmservlet?config=migrate&FORM=loginstart&ifsessid=formsapp.125&acceptLanguage=en-US,en;q=0.8"
          networkRetries="0"
          serverArgs="escapeParams=true module=loginstart userid=  debug=no host= port= term=C:\Oracle\Middleware\asinst_1\config\FormsComponent\forms\fmrwebwcs.res"
          separateFrame="false"
          splashScreen=""
          background=""
          lookAndFeel="oracle"
          colorScheme="teal"
          serverApp="default"
          logo=""
          imageBase="codebase"
          recordFileName=""
          EndUserMonitoringEnabled="false"
          EndUserMonitoringURL=""
          heartBeat=""
          MaxEventWait=""
          allowAlertClipboard="true"
          disableValidateClipboard="false"
          enableJavascriptEvent="true"
          MAYSCRIPT="true"
          digitSubstitution="context"
          legacy_lifecycle="false"
          JavaScriptBlocksHeartBeat="false"
          highContrast="false"
          disableMDIScrollbars=""
          clientDPI=""
          WebUtilLogging="on"
          WebUtilLoggingDetail="normal"
          WebUtilErrormode="Alert"
          WebUtilDispatchMonitorInterval="5"
          WebUtilTrustInternal="true"
          WebUtilMaxTransferSize="1048576"
          applet_stop_timeout="800"
  >
  </EMBED>
  </COMMENT>   
  </OBJECT>

  My question is what is the purpose of the forms_ie.js, should use us it when we do not run with the standard models htm and if we should how I change my code to include the latter.
  
  Thank you
  
  Neal
  
  Published by: nbyrne76 on February 18, 2013 03:12

  The reason why the java script (js) files have been added was the result of a change being implemented by browser vendors (Microsoft in this case). Without going into deep detail, the addition of these files was necessary in order to obtain the forms applet to load after that some restrictions have been added to IE. It was suggested that restrictions that cause once the need for these files has been deleted or modified. As a result, he peut+ _ be possible to remove these files and their references.  Oracle is looking into this possibility, but currently has not completed any formal test to prove if they are no longer needed.

  Feel free to remove them and make the appropriate changes to the corresponding model html files. Test drive it and let us know what you find. ;)

  Don't forget that since a Support of Oracle, view, delete these files and change this part of the model may not be considered "sustained."