How to get knowledgecenterpublic livelink.exe/fetch paths articles

Similar Questions

• How to get the Subvi (the virtual path is in .exe) reference in Run Time System

  Hello world

  The problem is how to get the reference of the Sub - VI in run time system, when the Subvi is in .exe after construction.

  More details:

  Top of page vi called the Subvi dynamically, so that the Subvi is always included, and the source object is the application.exe.

  After the above configuration, the Sub - VI will be the application.exe. For example, the path of Subvi est...\application.exe\SubVI.vi

  So, how to get the reference of the Subvi in Run Time System?

  I can't do it when you use 'open reference VI' with le...\application.exe\SubVI.vi path in the run time system.

  In fact, I can create a file to include the Subvi, rather than build the Subvi in application.exe, then I can get the convenintly reference. But this isn't my favourate average.

  Thank you

  chenyin

  That is the problem. Call a Subvi dynamic means users could change, but it is also very attractive.

  The dynamic call should be used in a user control, but some parade can avoid problems.

  It depends on why you use dynamic calls...-online 2 main ways:

  -Dynamic call are used to maintain a scalable framework for the code without acting on the executable file-online a single VI distribution managed by the administrator/developer

  -Dynamic call are used to provide a collection of "external" characteristic that could be enriched by the administrator/developer. For example, you provide your customers a set of selectable custom signal filters in the executable.

  In 2 cases, you are only able to assess the skills of the users to know if there is a risk of damage, if there is a change.

  So to stay only master a parade might be to provide dynamic VI without a schema, but with the problem of maintenance, since no in-place editing and more attention to manage distribution.

  Another way is to hide the actual distribution to user-online call dynamic VI but it without name as *.vi but others (a repellent name as system of OS name ) or simply without extension in order to attract not user... but that's debatable...

  Another more difficult but more secure method is to create a consistency check before your routine (version, user, modified date,...)

• How to get back my exe. and software doc. ?

  I accidentally deleted my program during the cleaning of the disk space that allows to work programs (programs based file. exe or doc.)

  .exe is just an executable file that is managed by windows, not a program. I do not in anyway .exe is not working.

  .doc however is microsoft office, so just reinstall only and you will be able to use again the .doc files.

• How to get the text on a path backwards?

  Hi all!

  I am a newbie to indesign, so I really hope that I won't bore you with my stupid questions - but...

  I created a circle with the text that follows the path all around. Only thing, that's the word at the bottom of the circle must be the 'right' way to the top and does not follow the rest of the text by worms inside. In this way, it will be easier to read at a glance.

  Is there a way I can return just a portion of the text, so even the slight curvature of the circle, it is the reverse for the rest of the text?

  Thanking you in advance if you can help me!

  EM

  You must make two superimposed channels and screw the text between them. You should see three handles for the text. Ones on the end have entry and exit ports as a regular text block and indicate the beginning and the end where the text will be placed. There is a third Center which can be harder to spot. It looks like an inverted T, and you can grab and drag it to the other side of the path to reverse.

• How to get the clip of source Path file in SDK exporter plugin?

  exportInfoSuite-> GetExportSourceInfo (exporterPluginID, kExportInfo_SessionFilePath and seqFilePath);

  char * filePath = seqFilePath.mMemoryPtr;

  

  What is the reason?

  Please explain with the source code.

  Sorry, controllers of export cannot export the Source monitor.  A controller of export is the only way to put a menu item file > export.  So what you ask is not possible with the current API.

  Providing a panel would give you customizable user interface and let control you exports.

• How to get the TOTAL size of the article before you download?

  Hi all

  Anyone know how to see what is the total size of the article before you download? I have an article that contains the video and several pages. I know I'm next above the limit, but I can't see how. I know that you can see the total link but surely Indesign, it's self will add more info on which will increase the size? I checked the video and pictures and they seem to fall under the 200 MB for the article. That article is not big so I need to know what is the total amount.

  I hope someone can help!

  (B) the limit is 100 MB for an article.

  That's really low, when you add videos to your article, so I hope they will change that in the future!

• How to get data from HTTP connection string?

  First of all, I have a PHP page that establishes the connection and the query to the database to get a random string in the database and printing on the page, say the name is: getString.php, such as every time that you refresh the page, the string that is printed on this page can be (or most of the time) different. The next step I wanted to do is to get this string and put it on my application for Blackberry, and I do not know how.

  I use WAP2 for the connection, and I copied the code that is shown here:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800451/800563/What_Is...

  So once the connection is established, how can I get the string content in this page? I had the url of http://mydomain.com/getString.php

  Thank you!

  Why don't you use a StringBuffer?

• Citing ContactList: How to get a selected contact?

  I'm trying to get a contact from a contact list after the user selects OR adds.  I would of course, this is as transparent as possible with the BB interface.  In another thread, someone suggested I try invoking the application of address BB to do this book, and of course that seemed like a good idea.

  I can call it in the application and I can get the notification when the user ADDS a contact, but I can't find any way to be informed when the user simply SELECTS a contact.  Also, once the contact is added (or, if all goes well, selected), it is not possible for me to put an end to the address book application.  Anyone done this kind of thing, or is it not, basically, to do?

  TIA,

  Allen

  Does that help?

  How - to launch address book and return a contact
  Article number: DB-00151
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

• How to get the work of localization

  It's finally time to get the site working in my apps and I'm getting a little frustrated. I have 2 newer phones and I can't work. I have a Curve 8320, which returns a BluetoothSerialPortGPSProvider little matter what I spend in criteria to LocationProvider.getInstance (). Which surprises me because bluetooth is disabled. I also have a storm that returns the value null, no matter what I go for a test.

  How exactly do any location valid on one of these devices? Even a cellsite location would be perfect.

  Better yet, what is the best practice to get the location of any BlackBerry with OS smart phone preferably > = 4.3?

  I spent a few days looking through the forums and knowledge base, and I can't it to work...

  First of all, the 8320 does not have internal GPS, so return a BlueTooth device is actually expected behavior.

  Please see the attached article:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800703/What_Is...

  Then try passing a null test to get the provider of location on the storm. This gives you the provider 'by default'. If you're on Verizon, it's stand-alone GPS provider, because you can't have something else, without being a developer of Verizon.

• How to get the categories of contect by a phone number?

  now I have a phone number, I can get the name and so on.

  but now I want to get the contect categories, how can I do?

  Please give me some examples of code, thanks.

  If you need information from a blackberry contact you using this code:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800363/How_To _...

  Press the button Bravo thank the user who has helped you.

  If your problem has been resolved then please mark the thread as "accepted Solution".

• How to get raw Message data?

  I have problems with what seems like it should be simple. I have a registered FolderListener who gets a messagesAdded() event. Works very well. I get the message subject and can read the topic and fields without problem. If I'm reading a message from my server, I need to read the body looking for a code. Here is where the problem lies.

  The message is a MIME message into 2 parts with some HTML and text. In the 4.5 OS, it seems you can use MimeBodyPart to get parts and to treat them, found in this article:

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800698/How_To _...

  However, I must be able to read the body of the message on OS 4.2.1 to search for the code. I don't need all the stuff of fance MIME processing. Is it possible to get just the raw text of the message? Something like:

  Msg message = evt.getMessage ();

  String body = msg.getRawText ();  There is no

  What Miss me? I tried toString() and casting msg to other types without result.

  Thank you!

  Nicholas

  Don't think. We have commercial products that must analyze the email and we lost several hours trying to resolve this problem before we decide to have a 2nd distribution.

  Then, the storm has been released and now we have 3 all (4.2, 4.5, 4.7) because of the API key.

• How to get SMS history in blackberry

  Hi all I am new to the Blackberry world.

  Please, help me to get sms history in blackberry.

  any sample code help me a lot.

  any help will be appreciated.

  Thanks in advance.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800792/801083/How_To _...

  or use the sample application smsdemo.

• How to get the Position value current sliderField

  I'm on SliderField for example following

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  But the problem is I want to get her current state value after each trip for this I use this code

  but it is not updated LabelField with its current value

  protected boolean touchEvent (TouchEvent message)
  {
  System.out.println ("method called touch");
  int vall = sixthSlider.getNumStates ();
  String txt = Integer.toString (vall);
  lbtitle.setText (txt);
  fieldChangeNotify (1);
  Returns false;
  }

  Two tips:

  (1) you use getNumStates where you call getState!

  (2) do not substitute the touchEvent at all. SliderField is a field almost entirely executed, so that she calls fieldChangeNotify on the changes of State. Set up a FieldChangeListener, configured to listen on this field and put your logic inside fieldChanged.

  Good luck!

• How to get all the accounts of messaging on a single device

  as the title

  Search recursively to find all emails. Check out this article, it gives hint on how to search recursively.

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800698/What_Is...

• How to get the exe to the front

  Hello

  My VI uses some third party exe files to control a few pieces of equipment.  I use SystemExec.vi to open programs.  However, I want only 1 instance of the program open, open once again can cause problems.

  Looking through the other forum posts, I noticed that I can use tasklist.exe to check if programs are running.  The last piece of the puzzle is to bring the program exe to the front, if it is already open.

  In short, if the user clicks a button, the program will open a single instance, or wear this instance to the front.  Anyone know how I can bring an exe program forward?

  Thank you.

  You need not use ActiveX. What you need is the Hwnd to the library function call. There should be a way to get the Hwnd of the window of your selection.