Cannot insert custom HTML or change the social widgets to update of available phone

Similar Questions

• Cannot insert field or paste into the existing local Variable (Boolean container)

  Cannot insert field or paste into the existing local Variable (Boolean container)...  TestStand 4.1.

  It is very strange, especially since I've done it before.

  'Paste' and "insert field" selections are grayed out and disabled in the context menu.  I tried everything I could imagine and tried various combinations of positions.  I'm sure it's something simple, bu redicoulously, I can't find the redicule to solve this annoying problem issue.

  The local variable is a container of Boolean.  It has 90 elements and I need to add one more.  I can not change / rename or do something with this Local.  Must be karma (for those who know me in the LabVIEW forum).  Usually, you do a right click, insert field and that's where...  Not this one...

  Anyone seen this before?  Closing and re-opening TestStand doesn't change anything.  There is a collection in LabVIEW that feeds the local section in TestStand.

  It is a container of data custm type.  To change flags are ok (edit is allowed).  Can't think of any other valuable information...

  He finds...

  It should be edited in the Data Types...  It was not automatic after reloading the prototype of LabVIEW.

  I knew it was something stupid that I didn't...  I became close... but had not sought far enough.

  I was looking at the range of Types, but not in the file of the sequence...

  

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal

  How can I add a custom coding to change the appearance of the "add to cart" and "view cart" paypal?  I can do these buttons on muse, or should I make them on Illustrator?

  Hello

  Here is some info:

  PayPal API developer - product page of Button Manager - classic

• Customer wants to change the text

  I have a Flash site that is currently using static text fields. My client came to tell me that he wants to be able to change the content of the text on a regular basis.
  
  It does not Flash or want to buy/learn it so what would be the best way that I can provide this control please?

  Hello

  In Flash, you can turn the static text box in a dynamic and then load the text from an external .txt file. In this way, your customer needs to change the .txt file.
  Here's a good tutorial on how to do it.

  http://www.bellaonline.com/articles/art37282.asp

  Hope that helps

• Is it possible to change the menu of windows update to the much more functional version?

  Is it possible to change the menu of windows update to the much more functional version? The change took place on 07/10/09 and made by selecting which updates to install more troublesome. * Note * I do without roll back Windows Update 7.4.7600.226 Agent that has been installed on 10/07/09.
  This change of format is also just change the switch on for windows 7?

  Hello

  Welcome to Microsoft Windows Vista community forums!

  I am sorry to say that there is no choice left out. You must perform a system restore or uninstall the manual update that is installed.

  Improvements made to the version of the Windows Update Agent 7.4.7600.226

  • Time sweep improved for Windows updates
  • Improved user interface for Windows Vista and Windows Server 2008 - based computers that are running Windows Update
  • More visible and detailed description of updates
  • Improvements in the way in which users are informed about service packs

  For more information, please see the link below:
   
  http://support.Microsoft.com/default.aspx/KB/946928

  Kind regards

  Savan - Microsoft technical support.

• There's no need to change the settings for windows update on RT

  Hello

  I can't find the option to change the settings for Windows Update on Surface with Win RT.

  I searched through the forums and answers, but on the left side of windows update, there is no option to change the settings on my surface.

  My windows update is configured to "Automatically install updates" and I can't change it.

  Thanks in advance for your help.

  Milan

  Configure your WiFi connection as connection meter and then check the settings of the meter connections - it allows to disable some updates and other actions which are data, unless you run them manually.

  Read this: http://windows.microsoft.com/en-GB/windows-8/metered-internet-connections-frequently-asked-questions

• Windows7 Update icon does not show in the status bar when updates are available

  Hi ALL-

  Update for Windows7 (64-bit) detects new updates and works perfectly in manual mode using the function update BUT do not perform the automatic updates or displays the Update icon in the notification bar when updates are available.

  It also does not indicate that the present updates to logoff or shut down.

  Update icon is the value to display in the status bar and appears when the updates are being installed.  The update log shows something as updates are detected, but are waiting for an administrator to perform notifications.  Record as an administrator doesn't help.

  History of the computer: a recent update of Windows 10 has crashed and has been reinstalled Windows 7 pro.  After this, update does nothing, but diagnoses online got going again.

  I can live with that but would like if possible challenge.

  Thank you

  Hello Charlene,.

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur because of corrupted or incorrect Windows Update settings.

  I suggest you run the Windows update Troubleshooter and check.
  Reference:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Please also Configure Windows Update settings and check the issue.
  Refer to this article:
  How to configure and use automatic updates in Windows
  https://support.Microsoft.com/en-us/KB/306525

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Insertion of HTML comments in the Insert menu

  I understand that the Insert menu has been changed to the CS6, then CC (Dreamweaver 12.2).

  http://helpx.Adobe.com/Dreamweaver/using/changes-insert-options-creative-cloud.html

  I use DW CC.   I want to quickly insert HTML comments in a bunch of different places in the code of my page.  Is it possible to do?

  If this should now be done by hand, I would like to know why.  The reason for the changes is that the removal of the obsolete elements in favor, but HTML comments are not deprecated in HTML 5.

  http://www.w3.org/HTML/WG/drafts/HTML/master/syntax.HTML#comments

  There is another option. The block of code, select option comment according to your requirement. See the image below.

  

• You cannot use vSphere client to change the settings of the virtual machine v10 or more

  Hello

  I just downloaded new version of Kali Linux to do some tests with my free version of ESXi update 5.5 2, the problem is that I can't change the settings of the virtual machine in vSphere Client.

  It's so good because of the independence of Web OS Client vSphere but what about the free version? Everyone knows you need a vCenter running successfully and a license for the vSphere Web Client.

  There is no free version of VMWare vCenter.

  Nice day.

  http://www.vmwarearena.com/2014/09/vSphere-client-5-5-Update-2-edit-hardware-version-10-VMS-using-vSphere-client.html

• Custom form to change the password

  Is it possible to create a custom form to allow users to change their password?
  
  Something like:
  
  Current PW:
  New PW:
  Check again PW:
  
  I know that I can use APEX_UTIL. CHANGE_CURRENT_USER_PW to change the password but how do I check the current PW?
  
  Thank you
  Mark

  You can ask an area secured with the old passage ahd cjheck
  function is_login_password_valid)
  --
  -Checks the table of wwv_flow_fnd_users to see if
  -name of user/password combo is valid within the current workspace (control security_group_id)
  --
  p_username in varchar2 default null,
  p_password in varchar2 default null)
  return a Boolean value
  ;

  of htmldb_util

• Cannot connect to gmail after changing the password

  I changed my gmail password yesterday, but since he could not connect and a message appeared asking me to go to: https://support.google.com/mail/answer/78754

  I have already try to disconnected and connecte connected to my account gmail in Firefox, use the DisplayUnlockCaptcha and permit apps less secure access my mails. But none of this works.

  In case the problem was thank Thunderbird too often connected, I also gave it a night and I tried again this morning, but no luck. I can access my email in the web and app Android gmail, but not Thunderbird.

  Are there other solutions to this problem?

  I finally found the solution after the addition of another account in Thunderbird with the same email.

  My original account has been set to use the "Normal password" as authentication method, and it worked fine, until I changed the password.
  But after adding the new account, I noticed gmail utilisΘ 'OAuth2.

  Changing the "Normal Password" to 'OAuth2' in the server settings-> authentication method, fixed the problem.

• cannot find 'aA' option to change the theme in ibook in ios 9.2

  While reading in ibook if I want to change the theme say, sepia, then we should be able to adapt using the button 'aA' at the top, but in my ibook app, there is no option, instead, I see only a brightness adjustment button. Please help how can I activate the option to switch theme in ibook.

  If you get the option will depend on the book - no-iBookstore ePub won't get the option, and real ibooks not all will have it. If the book supports, you will see the AA (and icons to search and bookmark) top right

• HP OfficeJet Pro 8600 AIO: Cannot 'Edit analysis jobs' to change the destination folder scans

  Hello

  I just installed it on my new Macbook, but somehow I can't change analysis tasks. Once I click on this button, I get an error that says I have no scan software installed and he directs me to the HP download page. But, the download-only "HP Easy Start', which I installed it there. See the printscreen below.

  I already deleted and reset the printer and re-installed the software several times. The pilot is set to HP and not air one time.

  I want to change the destination of the scans folder, which should be in the settings after scan tasks, that I can't reach.

  What's wrong?

  

  Hello

  Download and install the HP Easy Scan application below:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Now try changing the tasks of analysis once more and I want to know the results.

  Shlomi

• Cannot connect online after you change the settings system locale

  Hello

  Right now I have my locale Japanese system, it was originally English (United States). I can connect to the internet just fine until I have change the local back to English. Once I've got change for English I can't seem to connect online. I tried all the steps to fix the internet connection, but nothing helped.  However, if I set the locale Japanese system once again, my connection works fine as if there was nothing wrong with it in the first place.

  I must be able to connect with the English locale, so if anyone has any suggestions, I'd be very happy.

  Hello

  If connection involved any kind of ID / password etc you have to type in (or it is saved in the cache/shape) you will have to redo, or clear the cache.

  Language change can alter the charchters game and produce grabled id/pw and other identification information.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET