Cannot install updates or turn on the firewall. Need help please

Similar Questions

• Cannot install updates to Windows on the Satellite L505-13N

  Hi all

  I have a L505-13N and I recently changed the HARD drive. Even if I had a copy of the installation for win7 64 bit disc, there is a message at the beginning of the "set up services" that the installation could not proceed with this material...
  In any case, I installed the 32-bit version that came with the laptot.

  After installation, I tried to install the updates, but it's impossible. In a first time, that there was a message that the service can not started. I restarted services updates and the laptop itself, but nothing different happened. The same message.

  I tried both 'fix it' packages available for windows, but nothing has changed.
  I tried to install an inspection tool for installing sp1 (Windows6 1 - KB947821 - v33 - x 86) and it gives me the 0xc8000247 error message and no installation.

  I tried to install sp1 (from downloaded file - Windows6. 1 - KB976932 - X 86) directly, and it is for me a catastrophic failure with the error E_UNEXPECTED (0x8000ffff).

  All this with the program antivirus-firewall disabled.

  Anyone could offer a solution, because I would like to install at least sp1 (if not to receive updates!).

  Waiting for your answers - proposals,.
  Argi

  > Anyway, I installed the 32-bit version that came with the laptop.
  I guess you used the Toshiba recovery disc that contains the image of Toshiba, including the Windows 32-bit system, Toshiba Software, tools and drivers.

  Windows 0xc8000247 update problem seems to happen to other owners of Windows system, as this issue was already discussed in the Microsoft forums.

  * The 1st alternative: *.
  Please, start the console (cmd.exe) with administrator privileges and run the command
  sfc.exe/scannow

  * 2nd proposal: *.
  Try automatically reset the Windows Update components
  http://support.Microsoft.com/kb/971058

  * 3rd proposal: *.
  Updated the driver Intel "Intel Rapid Storage Technology technology."
  Restart the computer
  Check updates

  Mate good luck. Hope one of these solutions could help you

• I can't turn on my firewall. Help, please.

  as I try many way, I can't always turn on my firewall. When I go to Security Center > under essential security > enable firewall > its Security Center see the cannot enable windows firewall.

  Help, please.

  1 other question is when I put my computer doing nothing, my window crashes after I got the computer. This question is relevant to the firewall?

  Help, please.

  Hello

  I suggest you follow the steps suggested by Rami from the link below. It should help to solve your problem.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/d1377d1c-763f-4a2d-8cc0-160a181762d4

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• My iPad has been verification of operating system update for more than 3 hours.  Not able to do anything. Cannot cancel or turn off the power. Help please.

  MY iPad has been verification of update of the new version of operating system for 3 hours.  Unable on camel back or cut off the power supply.  What should I do? o

  Try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears.

  Then go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete. Then go to settings > general > Software Update and try again.

  If that doesn't work, try updating through iTunes on your computer.

• Linked excel tables in InDesign CS5 update problems and keep the formatting: need help

  I've been using excel to place several tables in my InDesign CS5 document which will require the update on a regular basis. The tables are already formatted in excel, so I will place in InDesign with formatting and you will usually have to reduce proportionally the tables as soon as they are in InDesign CS5. When I'll update the links, it is important the content of the tables as part of current text with larger text and I am unable to "Insert the picture content" or "shrink content proportionally." Nobody knows how to solve this problem or know of another way to link excel with formatting tables and update without having to reformat the table (i.e. to resize the image and text) every time that happens an update? Thank you!!

  Can't do it, sorry. Tables only.

  Bob

• Turn on the password. Help, please!

  Get the code 75682817 disabled

  Hello

  Please try:

  60780239

  Kind regards.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• cannot turn on the firewall in windows vista

  I went to the control panel to turn on the firewall, but a screen will appear that says: "due to a problem not identified, windows cannot display the firewall settings."  When I click on parameter update now a screen said, "firewall Windows was unable to make the requested updates".  Any ideas on how to proceed from here?

  Hello

  You can run this fix:
  Diagnose and automatically fix problems of Windows Firewall service
  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

• Windows did an update yesterday since so I will no longer post on my site without turn off the firewall in microsoft security databases.

  I use Netobjects 12 on Windows 7 with Virgin Media, all other programs work correctly, including Filezilla. I checked that NetObjects is one of the programs that are allowed to access the internet. If I turn off the firewall in MSE, everything works perfectly. I've tried it on two different sites, nothing helps. Any ideas people? Terry

  Hello

  We need to know what update causes this problem. I suggest that you want to run System Restore before the update will install and install all the updated manually and see update is causing the problem.

  Restore the system to an earlier point before installing this application.

  
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  System Restore can return your files system to a point in time before you noticed a problem, without affecting documents, photos, or other personal files. If the system restore does not resolve the problem, you can undo the restore operation and choose a different restore point.
  
  More information on:
  
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions
   
   
  Once you are done with this, manually install the update and check with the question.
   
   
   
  I hope this helps.
   
  
   

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• The adobe application manager cannot install updates because I told that another installer is running

  The adobe application manager cannot install updates because they say that another installer works? Another installer does not work, any way to fix this?

  We do not know. You provide all information system or other details. Reboot your system, be sure to sign as an administrator, and then try again.

  Mylenium

• 8007370c error code cannot install updates

  Have a Dell Inspiron I1720, TS250 @ 1.50 GHz, 2 GB - Ram, running Vista Home Premium.  I tried several times to install 13 updates (recent) starting with MS Net Framwork 3.0 SP2 - Vista, next KB2676562, etc.  Downloaded 13 but do not... settle retried several times, used the MS Fixit Center 3 or 4 times to correct errors of update. Get the following error from long:

  c:\ProgramFiles\MicrosoftFixitCenter\SAPF\System\60BB3EEE-C5FB-4233-B5FE-F8E36C1F78D9.9

  error code 0 x 80040154

  Background: high

  Other updates like MS security Essentials definitions get downloaded & installed without problem... I worked on this for 4 days... someone can help me resolve this quickly... my holiday is coming!

  E-mail address is removed from the privacy *.

  Hello

  Please follow the steps mentioned below and get back to us with the results.

  Method 1: Run (CheckSur.exe) system update readiness tool

  Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the CheckSur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/947821

  (947821) description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Try to install updates again.

  For more information, see the link below.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If method 1 did not fix the problem, proceed to method 2.

  Method 2: Run the clean boot and try to install the updates.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  If method 2 has not fixed the problem, proceed to method 3.

  Method 3: Scan of the file system (CFS) auditor.

  Perform a scan of the checker (SFC) system files on your computer. SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  See the following article for more information on using SFC tool to troubleshoot missing or corrupted system files:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  If method 3 has not fixed the problem, go to method 4.

  Method 4: Turn off the Antivirus and firewall.
  
  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Try to reinstall the update.

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope that helps!

• XP - cannot install updates (KB979909, KB982524, KB874417, KB982168)

  I am running Win XP Home Edition 2002 SP3.  I have four updates that refuse to install.  They are KB874417, KB979909 and KB982524 KB982168.  I tried to install several times and they just reappear back after reboot.  I tried to use at least three different methods of another user group forum which was just closed, and none of those who worked.  I think these are stop some programs from running correctly.  Help!

  Hello

  Do you have an error message when you try to install updates?

  All updates refer to Microsoft .net Framework, the installation of .net Framework 3.5.1 is a failure.

  I suggest you recommend to uninstall the .net Framework using removal tool and then reinstall them manually and check.

  Microsoft .net Framework removal tool

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
   
  I suspect that the problem may be caused by your security software blocks the installation updates. I suggest you temporarily disable any security software and then try to install these updates.
   
  Disable antivirus software
   
  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?
   
  Note:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
   
  The other workaround to install these updates (If disabling security software does not help) would be to place the machine in a clean boot State, then climb. It will be excludes the interference of a third party software conflict.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]