Cannot join the email through 'share' on the Galaxy Note Pro

Similar Questions

• Any plans for the customization of the Galaxy Note 2?

  Supposed to be a small addition of code would be FF compatible with window on the Galaxy Note 2 multi functionality. All plans or ingest by inserting this ability?

  It should work on the beta version of Firefox in the game store. We will publish this feature in Firefox 19 zone of the Pacific at midday Tuesday.

  https://Bugzilla.Mozilla.org/show_bug.cgi?id=810415

• Cannot join the homegroup

  I have two computers windows 7. One is a desktop computer and one is a laptop. I have a printer connected to my desktop computer. I'm trying to implement a homegroup on my desktop, so I can print from the files from my laptop and my desktop on my laptop access.

  I use AT & T as ISP and received a 2WIRE router/gateway to AT & T (Uverse).

  I access Internet through a wired connection from my desktop to the router/gateway and I have access to the Internet via a wireless connection from my laptop to the router/gateway.

  I have the driver for my printer on both computers.

  I created a homegroup on my desktop computer. I have received and printed the password of the residential group created on the desktop.

  When I on my laptop, I don't get the screen asking to join the home group. The screen I received looks like the screen that allows me to create a home on my lap top group.

  I want the House Group to set up on my office and share with my laptop.

  I spent reviewing the documents on the Internet to diagnose the problem without success.

  I don't think that my lap top using the correct network to find the homegroup (just a guess). I need to be able to connect but computers to the Internet without degradation of the service.

  Any help would be appreciated.

  Greg

  Original title: joined the homegroup

  Hi Greg,.

  You get an error message while trying to join the Group of House?

  I suggest going through the article and follow the steps. Here is the link for your reference.

  Why I can't join a homegroup?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Additional information:

  Homegroup from start to finish

  http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-7&V1H=win81tab1&V2H=win7tab1

  Homegroup: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Photo Story 3 cannot join the audio of the video program, get the error message, even when you try to select the files audio mp3

  Photo Story 3 impossible to join several video (audio) to program songs that has been created, an error message that it cannot accept the format audio, even when you try to select the files mp3 audio.

  Hi BeverlyHeuer,

  I suggest that you convert the music file to convert it into .wav format and check if you can contact.

  Photo Story 3 for Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-XP/help/digitalphotography/photo-story-FAQ

• Cannot join the Businness rule

  Hi John,.
  
  We have created a business rule and attempted to join the outline of planning. But we got the following error message
  
  Unable to connect to the planning.
  
  The planning server is running.
  
  Please let me know the resolution.
  
  Thank you
  Sravan

  Before opening in EAS, try to connect to the Web first planning application.
  Also, make sure that the RMI service is running.

  If you still have problems I recommend logging on My Oracle Support and have a read of the doc - id - 763345.1
  It goes through different options to solve the problems of trade rules.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I cannot join the domain in my office with my home edition, Windows

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  XP Home Edition is not supported to join a domain. XP Professional is.

• Two computers (Win7), a homegroup. Why second computer cannot join the homegroup?

  I have two new laptops, in the two running Win7.  Computer laptop 1 runs 64 bit.  Laptop 2 runs 32 bit.  CradlePoint router used to set up a network home.  Both computers show as being on the host of the CTR network.

  Set up a homegroup on 1 laptop.
  Laptop computer 2 "joined".  Laptop 2 could see and read the files from the laptop 1.  Computer laptop 1 could NOT see cell phone 2.

  Restart both computers.  Same problem (portable 2 is invisible for 1 laptop, if 1 cell is visible for laptop 2).

  Computer laptop 1 has left the homegroup, intending to join in an attempt to solve the problem.  Now, when 1 laptop computer attempts to join the network, the message is: "There are currently no homegroup on the network", with the offer of "create a homegroup."

  Laptop 2 shows that there is clearly a homegroup, and he joined.

  What should I do to join the existing laptop 1 to the homegroup?
  This could possibly be linked to the 64 bit OS?  Can't imagine it would, but I'm at a complete loss here!

  Confused Laurie,

  Take a look at the following link and see if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Cannot join the homegroup to the second computer in the network.

  I've recently updated my desktop pc and laptop with windows 7.  The office is a s 530 Dell Inspiron and the laptop is a Dell Inspiron 15.  The Office has managed to create a homegroup in windows 7, but I can't get the laptop to join.  I ran the wizard of troubleshooting many times without success.  Sharing files between computers is available, I can't just join the homegroup.  I have read several forums about ipv6, and although it shows that IPv6 is enabled, the status shows no network access.  I tried to leave the homegroup, stop and begin another without success as well.  Router is a Belkin N1 Vision 802.11n.  I can follow directions very well, but I'm not a genius with this stuff.  If there is something that I should be more specific, please let me know.  I'm going crazy here.

  OK, that was my answer.  I have connected the laptop in the server and was immediately allowed to join the homegroup.  Once the initial installation has been made, I can now access homegroup wireless on the network without any problems.  I don't know why I had to connect using ethernet to set up.  New bug in the OS, I guess.  Thanks for the help.

• DNS question... Help, please. Cannot join the client to the domain.

  I played with workstation 10 for about a day now.

  I'm pretty green when it comes to the DNS configuration. The reason for it, for the experience.

  I created a Virtual Server R2 of 2012 and a VM 7 Win machine. I'm trying to join the VM 7 Win the field laboratory.
  I've already promoted the server to be a domain controller.

  The error I get is:

  An attempt to resolve the DNS of a domain controller in the domain being joined has failed. Please check that this client is set to reach a DNS server that can resolve DNS names in the target domain.

  Not sure what is the cause.

  In the IPV4 properties, I changed the DNS server to use the IP address of the domain controller that I read but still no luck.

  Also how can I set up the network for the VM?

  Thank you

  Jason

  Come on come on client machine Winodows 7 > network and sharing Center > adapter set it > right click Local area connection and click Properties

  Double-click PTC/IPv4

  In the preferred DNS server, type the IP Address of the domain controller and see if that helps the problem.

  Also check if the firewall is blocking communication. Disable the firewall and check.

• View 5 error 18 cannot join the domain with parent vm win7

  I have installed our software required, the agent installed, the parent has added to the domain and when I go to create the pool I finally get the 18 error saying that it was impossible to join the computer to the domain. If I look in the current directory on our server, 2003 sbs, it shows that the machine is there, but when I try to connect to the console under vsphere, I get the error that says "the security on the server database has no infographic account for this workstation trust relationship." I see a lot of fixes for this but those who tend to treat images of windows xp.

  Also, I advanced and tried to create the registry entry for the "NeutralizeNT4Emulator" who did not work as well as manually configure the default gateway and the dns server.

  Should I disable the firewall on our virtual machines of parent service? I tried without success either, but I thought I'd ask.

  Any help would be appreciated. Thank you!

  This may be due to the incompatible version of composer, see Composer 2.6 is not compatible with the view Agent 5.0. Refer to this http://kb.vmware.com/kb/2006879 KB

• Cannot join the bulge effect to a Null object

  Hello

  I am applying the effect bulb on a pipe, making it feel like something is moving across the pipe (see printscreen).

  I made a sketch of a Null object and then applied the bulb effect. Did not work. Then I added the new solid layer, childed to a Null object, and the bulge applied to a solid. Does not work either. Also found some tips I should online "Parent a Null value adjustment layer and apply the effect to him", but the effect of the bulb does not always work.

  My composition contains layers .psd (Pipe and bottom). When I apply the bulge on the pipe itself, it works OK but I'm unable to animate the bulge itself, which is to travel through the entire pipe.

  where I'm wrong?

  With the help of CS6 on Win7 Home premium

  Try to apply the bulge effect (and expression) to the conduct, not the null value.

• Oh boy... Would physical left and P2V-cannot join the domain

  Hello

  I was basically testing function P2V and I left the physical server. No I want to regularize and actually use my PHYSICAL server - but I can't join the domain - I am tired to the subject he take off the field and put it back on. All the tips are greatly appreciated.

  Thank you

  When the two systems, the virtual and the physical, appear on the network with the eID of sam, it is possible that one of them will change the password secure between the domain member server and the domain controller. If the other is out of the game.

  As you say, he join the domain.

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• cannot open the first Adobe pro to buy and download directly from CC

  Hello, I would like to know, because I can't open the first Adobe pro to buy and download directly from CC, I've updated it appears instead of open.

  You MUST have a 64-bit computer what is your computer?

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

  -Programs does not appear if they are not installed on your computer

  -http://helpx.adobe.com/creative-cloud/kb/all-apps-displayed-aam.html

• cannot join the SkyDrive file to email?

  I sent a document as an attachment to an e-mail.  I created the email in a Surface email client application.

  The document was stored in the disc of sky.  But when I tried to attach it to the email, the mail attachment widget me failed to see or select the files in the sky player.  Why not?

  I so had to go to the file Explorer and copy from SkyDrive to a folder on the C drive, then I could attach to the email.

  Kind of defeated the purpose of having the SkyDrive.

  Is it possible that I missed something?

  Hi Benzman_29,

  When you touch the trombone, the list of files appears.  Top left, press the word 'File' with the menu drop-down arrow to display the list of other places.  From there you will need to scroll down a bit and you'll see the SkyDrive option.
  Note: You (not your email recipient) must have installed the SkyDrive app and have used it at least once so it is registered with the mail application.