Cannot publish the executable file

I do not work with my colleagues in SZ, which uses Adobe Captivate 8.

She said that she cannot publish the course as a executable file.

I ask him to print screen of the page post for me, it really lacks executable button, do I know how this button can get out?

She must be on Captivate 8.0.

Tell him to go to the Adobe site and download the free update from 8.1 for his version of Captivate.

Tags: Adobe Captivate

Similar Questions

Cannot publish the html file

When I publish my html file, I get an error message:
"The movie. SWF file creation error". Make sure that the destination file is not locked or on a locked drive. Also, check that the file name is too long.
I did everything above and still get the error. I can export the SWF file, but I need a transparent background so I need the html code. Any suggestions?

In the windows version of Flash, the full path for the html and swf files are written in the window post. If you work on this file on a different computer than the one that originated the file, then the path may not be recognized by Flash. From the windows that contain the path in the scrolling window to publish at the end of the file name, you will not see the rest of the path name. Select the text in these spaces and publish delete and write the name of the file that you want, or close the window and save the fla to another location. And then publish.

Cannot start web server on the executable file

Hello

We have a problem with a Web server - we cannot get to initialize the help of nodes of property or the ini on a compiled executable file.

As part of our application, we are starting the Web server to publish a status page to be read remotely. This works very well when we are running in the development environment and also when we run an executable a PC with installed development environment, however it will not boot on a PC with just the runtime installed.

I have attached some of the code that functionally does exactly the same thing in our main application. I used this as my Tester code and built in an exe while trying a lot of different things to fix.

When executing:
- The code will sit in the while loop until I press stop.
- Web server: Active Server = FALSE
- Out error = ERROR No.
In the full application the while loop waits a few seconds before throw an error if the server is not started. In this example, I can let the loop running for awhile without leave. Normally, the boot time is<50ms when="">

It's the ini file to the executable file:

[WebTest]
server.app.propertiesEnabled = True
Server.OLE.Enabled = True
server.tcp.serviceName = "My Server computer/VI"
server.vi.propertiesEnabled = True
WebServer.Enabled = True
WebServer.TcpAccess = "' + * '"
WebServer.ViAccess = "' + * '"
DebugServerEnabled = False
DebugServerWaitOnLaunch = False

And it is the Web server configuration file:

ErrorLog "$LVSERVER_ROOT/logs/error.log".
LogLevel 3
The default server name
DocumentRoot "$LVSERVER_ROOT /... /.. '. "/ www".
Listen 8000
ThreadLimit 10
TypesConfig "$LVSERVER_ROOT/mime.types»
DirectoryIndex index.html
LoadModulePath "$LVSERVER_ROOT/modules '" $LVSERVER_ROOT/LVModules "" $LVSERVER_ROOT /... ".
LoadModule LVAuth lvauthmodule
LoadModule LVSnapshot lvsnapshotmodule
LoadModule LVRFP lvrfpmodule
LoadModule dir libdirModule
LoadModule copy libcopyModule

AddHandler LVAuthHandler
AddHandler LVSnapshotHandler .snap
AddHandler LVRFPHandler

AddHandler dirHandler
AddHandler copyHandler

"CustomLog"$LVSERVER_ROOT/logs/access.log"'%%u %t \"%r\ hour' % > s %b.
KeepAlive on
KeepAliveTimeout 60
Timeout 60

As can side note, anyone tell me where the $LVSERVER_ROOT variable is configured?

I tried the things:
- Copy a new default configuration file before the entry into force
- Writing a predefined file (encoded) before initializing config
- Definition to root before initializing directory (it actually generates an error because the server is not active...)
- Set WebServer.Active = TRUE several times inside the while loop
- Toggle the web server in the ini file
System:
- LabVIEW 2010
- PC with Windows 7 running
Thanks for any help, because it makes me crazy slow!

Ben

Hi Marco, thanks for the reply.

I have this guide was reviewed previously and had done all that he but a small section who gave me a hint of something to try and I have solved my problem, so thank you!

If anyone is interested, here's the problem:

The directive DocumentRoot folder in the config must exist or the Web server cannot be started. So basically, make sure that the file points to a folder that exists!

This leaves two small annoying problems if - you can't see if the file exists (and then create it) before starting the Web server, because you can not query the path to the folder without the Web server running.

AND

You can't really define the configuration programmatically file as parameters from the file are responsible for execution, not on the start Web server.

The result of this is that the config file and the folder root document should be created (and corresponding of course...) when the executable is built / installed on the system. Not a massive headache, but it means do not forget to put things in the build specification and do not rely on software to do the job at startup

the contents of this file cannot be decompressed the executable file that you are attemptiong to run

The contents of this file cannot be decompressed the executable file you are trying to run has been corrupted you can get another copy of the file check its integrity and try again.

You have not told us what you're doing or what program you are trying to use...

Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

Hello

Method 1:

I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

b. click on continue or provide administrator credentials if prompted.

c. in the type in the following command prompt window and press ENTER:

d. sfc/scannow

e. you should see the following message on the screen:

§ Begin the analysis of the system. This process will take time.

§ Beginning verification phase of system scan.

f. % verification complete.

g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

For more information, see the article mentioned below.

http://support.Microsoft.com/kb/929833

Method 2:

Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

Create a user account

http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

Method 3:

I suggest you do a system restore and check. See the article mentioned below

System Restore: frequently asked questions.

http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

What is system restore?

http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

Thanks and regards.

Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think.

My Avira Antivirus has been removed and the executable file Recovery Disc Creator

Hello

I want to create recovery DVDs, but I can't use Recovery Disc Creator because Avira deleted the executable file. How to do it?

Thanks in advance

I use Avira if a long time now and I've never experienced something like that. It's pretty bad situation now.

Creator of recovery disk Toshiba cannot be downloaded and what you can do now is to reinstall the OS using the HARD drive recovery option, then when the laptop has once again factory settings, you will be able to start this tool and create the recovery disk.

Out of curiosity, what model of laptop you have exactly?

RTE de LV cannot open the project files that include references .lvlib in dependencies

I am writing a DLL LabVIEW to inspect the LabVIEW project files, and I noticed that if a project has a .lvlib reference in its dependencies, then the Run-Time Engine is contradictory on whether or not he can find the project file:
- Project.Open returns error 7 (file not found)
- Project.GetFileLVVersion is a success
Here are some excerpts from my code of G and C engaged in this behavior:
```
   int openStatus = StatusSuccess;

   char * projectVersion = createStringWithLength (VersionStringLength);
printf ("Analysis %s\n", pathchaine);

   OpenProject (pathchaine & openStatus, projectVersion, VersionStringLength);

   printf ("  project written in LabVIEW %s\n", projectVersion);
If (openStatus is StatusSuccess)

   {

      printf ("  Open the project file.") \n") ;

   }

   on the other

   {

      printf("Error: could not find Project file, or file was not a Project file (Error code %i).\n», openStatus);")

   }
```
However, when running in the development environment, the two methods are successful.

Is this a bug, and if so, is it fixed in 2014 of LabVIEW?

Here's how you can reproduce:

Prerequisites:
reference .lvlib to break dependencies Project.Open in LV RTE
```
$ make

patch the file "builds/platdefines.h.

GCC - std = c99 g OpenProject.c o OpenProject.exe - lOpenProject - Lbuilds
```
6. type "c:\xtra\temp\OpenProject.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProject.lvproj '.

Analysis c:\xtra\temp\OpenProject.lvproj

  Project written in LabVIEW 13.0

  Open the project file.
```
7. the opinion that both call nodes execute correctly.

8. type "c:\xtra\temp\OpenProjectWithLvlibDep.lvproj" OpenProject
```
OpenProject $ 'c:\xtra\temp\OpenProjectWithLvlibDep.lvproj '.

Analysis c:\xtra\temp\OpenProjectWithLvlibDep.lvproj

  Project written in LabVIEW 13.0

Error: Could not find the project file or file was not a project file (error code 7).
```
9. notice that the node version managed while the open failure.

10 type diff OpenProject.lvproj OpenProjectWithLvlibDep.lvproj
```
$ diff-u OpenProject.lvproj OpenProjectWithLvlibDep.lvproj

-OpenProject.lvproj  kills Nov  4 11:28:28 2014

+++ OpenProjectWithLvlibDep.lvproj      kills Nov  4 11:32:37 2014

@@-13,7 + 13.11 @.

       true

       fake

       

-      

+      

+          

+              

+          

+      

       

          

             true
```
Here's another way to trigger this behavior, which shows that LabVIEW occasionally Range the element dependencies:
Add to the project a new VI and place the constant path of file "Application Directory" his block diagram.

Select ""leader "Save All (this project)" and use the default name for the new VI.

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

Remove the "Application Directory" path of file constant

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Note that the problem has disappeared, as is expected.

Add the "Application Directory" path of file constant in the block diagram.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice there is no problem, which is surprising, because that there should be a mistake because the dependencies item was not tidy.

Close the new VI and pull out of the project.

Select ""leader "Save All (this project)"

Open "OpenProject.lvproj" in a text editor.

Note that the dependencies item was put away.

Add VI back to the project.

Select ""leader "Save All (this project)"

Type 'c:\xtra\temp\OpenProject.lvproj' OpenProject

Notice that there is a mistake once again, as is expected.

NInjaneer_wow wrote:

The same behavior occurs in LabVIEW RTE: a new project with a constant of the Application in an empty vi directory will return an error 7 - file not found, but still return the correct version of LabVIEW in which the project was created.

I did experiment with workarounds for this problem, and I found a.

When I used to get the path of LabVIEW libdir in the ini of the executable file, execution is able to load and inspect the project file.

LIBDIR = 'C:\Program NIUninstaller Instruments\LabVIEW 2013'

While it is expected that a stand-alone executable can be placed on a system that does not have the LabVIEW IDE, it is still surprising to me that the execution engine cannot find standard library of LabVIEW without some explicit guidance. What other factors contribute to this behavior?

References:

Configuration of LabVIEW files and paths- http://labviewwiki.org/LabVIEW_configuration_file/Paths

"Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file

Hey all,.

I have a user running windows Xp Professional with service pack 3. The user gets the following error message when it connects to the computer every morning. "Error: could not load file or assembly ' WMIControlLibrary, Version = 1.0.0.0, Culture = neutral, PublicKeyToken = null ' or one of its dependencies. The system cannot find the specified file. The only thing that seems to not work is calendar Office Print Wizard. I deleted this file and the problem persists. Also, I have not found anything in the case where the viewer that relates to this error. The only mistake I found was an issue with the .net framework. I removed all the facilities framework and their updates. Restarted the computer and ther error disappeared and was replaced by errors in programs that require this file to work. I reinstalled .net framework 2 and returns the error. I left all the machine off separation executives. I did a repair on the .net framework without change. I'm not quite sure that the .net framework is the problem though. I guess that if just. At this point I don't know where to go from here how to solve this problem. Anyone got ideas?

Hi tripleb316,

· Did you do changes on the computer before the show?

Follow these methods.

Method 1: Follow these steps:

Step 1: Start the computer in safe mode and check if the problem persists.

A description of the options to start in Windows XP Mode

http://support.Microsoft.com/kb/315222

Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

How to configure Windows XP to start in a "clean boot" State

http://support.Microsoft.com/kb/310353

Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

(a) click Start, run.

(b) type msconfigand click OK.

(c) the System Configuration Utility dialog box appears.

(d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

(e) when you are prompted, click on restart to restart the computer.

Method 2: Scan the file system (CFS) auditor to repair corrupted files.

Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

http://support.Microsoft.com/kb/310747

SE error message: "the registry cannot load the hive (file) \systemroot\system32\config\software"when try to start on the original copy of Windows XP. "

Original title: you're smarter then me. Help, please

My windows xP home edition has crashed on my HP Pavilion a620n. Initially, I was able to get by using the original cd of the publishing house. Then it crashed again. Rebooted and pressed F8 and typed in my administrator id. This time, a cam of the screen saying that it was an ID of invaled. Re-checkeded my Id and it was OK. Put in my cd original and installed on a different partition. Problem is that I forgot to do a dual boot. Now I have two sessions of windows xp on the same partition. Am able to switch between them, but really need the original. When I click on the origianl happens with the registry cannot load the hive (file) \systemroot\system32\config\software.

Is it possible to fix this?

Thanks, it was a great help

AVG error code... Installer initialization failed due to the following error: error _: @AvgErrorCode_0x0253% the execute% FILE = "C:\Program Files (x 86) \AVG\AVG8"__ @AvgErrorCode_0x0020 ".

Recently cannot run downloaded executable files. Downloading files ask ro run I click Run then more nothing. I use AVG free, which I was unable to uninstall. Totally lost. Can't open AVG, but can't get rid of it. Help please and thanks in advance.

http://www.Avg.com/us-en/download-tools

Link above has AVG removal tools

Download and run.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

To install programs > download/save to the desktop > right click on the setup.exe > run as admin.

For any other question of programs:

http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

See you soon. Mick Murphy - Microsoft partner

Windows Movie Maker cannot publish the movie to the specified location

From: patiotaiza

Message: I have a 5-minute project and trying to publish it on my PC I get the following message:

"Windows Movie Maker cannot publish the movie to the specified location. Verify that the original source files used in your movie are still available, that the publishing location is still available, that there is enough available disk space, and then try again. »

I have enough space available in my PC (8 GB on the left), search for the missing files and they are all OK, tried several different locations, editing... and it still doesn't work. I'm sad, can someone help me please?

Thank you!

De : John Inzer

You may have some incompatibility issues with your source files. Take a look at the following articles:

Movie Maker 2 - problem solving - "cannot record a movie.

http://tinyurl.com/yjvztz

or

http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

Type of file with Movie Maker compatibility

http://tinyurl.com/v8tee

or...

http://www.myvideoproblems.com/tutorials/MovieMaker/File_type_compatibility.htm

What file type should I use in Movie Maker?

http://tinyurl.com/6n66g3

or...

http://www.myvideoproblems.com/tutorials/MovieMaker/WhichFileTypeInMovieMaker.htm

John Inzer

MS Digital Media MVP

View

This isn't a technical support

I'm a volunteer

Solutions that work for

me I work for you

Proceed at your own risk

Another response of the community of Windows Vista discussion groups

ORA-01124: cannot retrieve the data file 1 - file is in use or recovery
I'm trying to recover the database in waiting, but it gives the error below.

ORA-00283: cool cancelled due to errors
ORA-01124: cannot retrieve the data file 1 - file is in use or recovery, the recovery is already said
ORA-01110: data file 1: ' I:\ORACLE\QAS\SAPDATA1\SYSTEM_1\SYSTEM. DATA1'

When I checked in the alert log recovery is not started. and later I hae given ' alter database recover Cancel "and the command to meet with the threshold.

"media recovery has not started.

It seems that the recovery was stuck between the two.
Please advise me how to kill the recovery session that is stuck. because I don't want to bounce the database pending.

Thanks in advance.
Dataguard and MRP, you run a script before.

In a standby scripted, a session to RETRIEVE the DATABASE would an UNTIL clause (SEQUENCE up to THAT most likely). At the end of the recovery at this point (SEQUENCE #), he left and stop at the database.

In addition, the script is such that when a RECOVERY session is active, another session is not authorized to start. It can loop in pending state or go out and do it again the next scheduled interval.

Apparently your startup script is not strong enough to prevent another session of RECOVERY to start even though the first is active (or it doesn't have a good up to THAT clause and stop, exit, closing stocks)

What you have is a custom implementation of a database of pending. Without all the details of the script, the 'blocking' between sessions (to avoid a second RECOVER start when one is already running) etc... We can't really do much to help you.
Your scripts must be standing with status information. It should be possible for you to discover the 'other' sqlplus session which emanates a DATABASE to RECOVER, but not yet out (p. ex... How about a simple "ps - ef |") grep sql' and ' ps - ef | combination of grep ora"?)

Hemant K Collette

Published by: Hemant K Collette on May 29, 2013 17:47

LoadFile() cannot load the local file?
My program works OK in Director, also OK on the web, but can't work on local. It is said after post like Shockwave and HTML file when the Director runs the HTML code automatically, the DCR in HTML file works fail. I am looking for reason, find, this is because one sentence of the program:
Member ("World"). LoadFile ("myModel.W3D", true, true)

In Director, it works. myModel.W3D is 'file:///D:/MyDirectoty/myModel.W3D '. On the Web, that's OK too. At this time, myMode.W3D is actually "" http://www.myWebSite.com/MyProgramDirectory/myModel.W3D ". " But if I open the HTML published, the loadfile() cannot work. Why?

It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?

Quote:
Posted by: WrongAgain
It is because of security reasons, MacroMeadia let loadFile() cannot load the local file or there is a mistake in my program? How can I let my program works locally?

Bingo-test - this is a safety feature to prevent the shockwave files accessing your file system.
You can disable this security feature by placing your project published in the folder called «DSWMedia» shockwave

-Ben

Cannot find the configuration file in the classpath
Cannot find the configuration file /oracle/apps/prc/po/...applicationModule/common/bc4j.xcfg in the classpath.

Hello!

I try to run the following code:
String appModule = "oracle.apps.prc.po.manageDocument.uiModel.viewDocument.applicationModule.ViewPurchasingDocumentApplicationModule";
String cfg = "ViewPurchasingDocumentApplicationModuleLocal";
ApplicationModule applicationModule = (ApplicationModule) Configuration.createRootApplicationModule (appModule, cfg);

I get this error message:
Exception in thread "main" oracle.jbo.ConfigException: Houston-33001: could not find the configuration file /oracle/apps/prc/po/manageDocument/uiModel/viewDocument/applicationModule/common/bc4j.xcfg in the classpath
at oracle.jbo.client.Configuration.loadFromClassPath(Configuration.java:430)
at oracle.jbo.common.ampool.PoolMgr.createPool(PoolMgr.java:293)
at oracle.jbo.common.ampool.PoolMgr.findPool(PoolMgr.java:557)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1334)
at oracle.jbo.client.Configuration.createRootApplicationModule(Configuration.java:1312)
at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.getXMLData(generateXml.java:26)
at oracle.apps.prc.po.manageDocument.model.viewPdf.generateXml.main(generateXml.java:39)

I checked and the configuration file is in the correct directory, and I can see it in my Application Module - Configurations. No idea why this is happening? I need to configure something specially for it, or add it in my classpath? If so, how am I supposed to do?

Thank you

Mansi

Published by: Mansi G on October 6, 2008 11:56
Where is the code you posted? Running in a separate project, I guess? This project has a dependency on the project that contains the specified app package?

And just to check (although by default, JDev should do it for you) - the project of app module has been compiled since adding the configuration, right? You should check that the config is not only the title of the project/src, but the title of the project/classes.

Published by: Avrom Roy-Faderman on October 6, 2008 14:02

Oh and BTW - I guess it's not an application typical of ADF, right? In a standard application of the ADF, you would very rarely need to instantiate one module application in code like this. You can only let the function of data binding for you. The technique that you use is the most appropriate for purely programmatic cases, no - UI. (for example, once I tried to put in place an SMTP server, supported by the business components. It was a case of ditching databindings and do the kind of thing that you do, because he had no layer view (because there is no user interface for rendering).

Setup error "the system cannot find the specified file" (hpzprl40.exe)

Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops. Help, please.

Hi loveisus,

Try using the brush included in the CD or download. Let me know what you find?

Of the Original installation CD:

1. Insert the CD in the drive and then cancel Setup

2. open my computer and click right then on the CD from the drive and select open

3 open the Util folder

4 open the CCC folder

5. run the uninstall_L4 (exe or Bat)

6. once the uninstall is complete, restart the computer

7 run the Accessories\ System Tools Disk Cleanup

8. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

9 download drivers and full software features

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

10. run the download to reinstall the printer

If the software has been downloaded and extracted to your system:

1. type % temp % in the field of race

2. Locate and open the folder starting with 7z (example: 7zS2356)

3 open the Util folder

4 open the CCC folder

5. run the uninstall_L4 (exe or Bat)

6. once the uninstall is complete, restart the computer

7 run the Accessories\ System Tools Disk Cleanup

8. download and install the latest version of Adobe flash player

http://www.Adobe.com/support/flashplayer/downloads.html

9 download drivers and full software features

http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76232-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 1153481 & sw_lang=.

10. run the download to reinstall the printer

Cannot publish the executable file

Similar Questions

Maybe you are looking for