Cannot run Windows backup because I get an error message.

Similar Questions

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

  The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

  Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

• Cannot open .exe files. I get the error message by side configuration is incorrect. Event log contains contradictory elements.

  Please help me!

  I have HP Windows Vista Home Basic 32-bit. Cannot open .exe files. I get the error message by side configuration is incorrect. In the event log, it says error in manifest or policy file as a component version required by the application in conflict with one another component version already active. The two components are: c: Program Files\Viewer\Microsoft.VC80.CRT.MANIFEST.

  Problems arise when I deleted some files (don't remember which) I am now myself for kicks. Then I completely restored my system with a restore cd, upgrading to vista, downloaded all the updates and everything else works fine only problem is the opening of .exe files. Can someone please help? I'm no computer wiz only right following the indications :)

  Thank you.

  Hello

  Follow these methods and see if the problem still occurs.

  Method 1:

   

  Scan an System File Checker (SFC) on your computer and see if that fixes the problem.

  Method 2:

  Test the issue in a clean boot State.

  Note: follow step 7 to your computer as usual.

  Method 3:

  Follow the steps in this link as well.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/the-application-has-failed-to-start-because-its/c4a7c2ba-C7CD-41cb-a7ff-9fedafaf33a7?tab=MoreHelp

• When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  When I try to send a picture through Windows Live Mail I get an error message telling me to delete the picture, and then try again.

  original title: RECEIVES the MESSAGE of ERROR WHILE SENDING AND RECEIVING PHOTOS

  Hello Jane,.

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

   

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

   

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  The upgrade from Vista to Windows 7

  I just bought Windows 7 upgrade Windows Vista. I get the error message: operation is not supported on this platform. What should I do to get this latest version in my computer?

  Have you tried to do an upgrade installation or a custom installation?  A custom installation requires you to back up your files and settings with Windows Easy Transfer and then reinstall everything after installing the new.  If an update install does not install work, you need to do a custom.

  In addition, a Windows 7 Anytime Upgrade will not work and you get a message from a platform if you have bought a UA and tried to use it with Vista.  Vista upgrade requires a detail, a copy in the Windows 7 box.

• I continue to reinstall cs6 on mac because I get the error message that I can't save files - blah blah

  I continue to reinstall cs6 on mac because I get the error message that I can't save files - blah blah

  What is your version of the OS?

• Windows Mail JPG attachments get the error message "cannot find... .jpg file.

  Recently, I try to open JPG files in Windows Mail and get an error message window that says that "Windows cannot find"filename.jpg"make sure you typed the name correctly and then try again" I can save the JPG file, then open it, but Windows Mail won't open it by simply clicking on the attachment JPG.

  There has been reports of this behavior with only some files (.jpg or .pdf) and the reports of this problem with each attachment after installing IE8.  Frankly, they are quite few and inconsistent and avisnon there is no clear solution.  Try these two steps in this order.

  1. Use this utility to 'fix' to reset the Security http://support.microsoft.com/default.aspx/kb/949220 settings
  2. Use this utility to re - register a lot of IE http://iefaq.info/index.php?action=artikel&cat=35&id=133&artlang=en important .dll

  There are other actions that must be reported to temporarily fix the problem - move to the location of the internet temportary file, for example.  Another reported a little is to uninstall IE8 and then reinstall it with all the temporarily disabled third-party security software.

  Since you have only this problem with .jpg files, you can try to reset file associations for .jpg.  Open an administrator command prompt (right click on cmd in the start menu and choose "Run as Administrator").  In the administration command prompt window, type the following lines exactly as shown:
  Assoc .jpg = jpegfile
  
  Assoc .jpeg = jpegfile
  
  ftype jpegfile=%SystemRoot%\System32\rundll32.exe "%ProgramFiles%\Windows Photo Gallery\PhotoViewer.dll", ImageView_Fullscreen %1

  Steve Hebert - MVP Microsoft Internet Explorer

• Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

  Hello

  I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

  Rick

  original title: burning a CD problems

  Hello

  
  (1) what version of Windows Media Player do you use?
  (2) what is the model of your CD burner?
  (3) you have the latest drivers for the CD burner?
  (4) what type of file you are trying to burn?
  (5) you receive error codes?
  (6) what version of the operating system is installed on the computer?
  (7) we get to a particular file?
   
  
  Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
   
  Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
  
  Method 3: You can also check out the link below:

  Windows Help and procedures: burn a CD or DVD in Windows Media Player: frequently asked questions

  I hope this information helps!

• I have the inability to run Windows Update. I get this error: Code 80070005

  I have the inability to run Windows Update. I get this message: Windows could not search for updates. An error occurred when the new updates for your computer. Error: Code 80070005 Windows Update encountered an unknown error.
  I tried a few patches, but they do not work. Including those of ACCESS DENIED. And another by Kim.
  What's next?

  Hello

  • Have what troubleshooting measures you tried?

  Error code 80070005 means generally that you're not quite allowed to install updates. Access may be denied if you have logged on to the computer as a standard user and this account does not have permission to install updates.

  To resolve the problem follow the steps that are listed in the methods below in the order listed, starting with method 1.

  Method 1:

  Log the computer as an administrator or as a user with administrative rights.

  Method 2:

  One of the most common causes of this error code (access denied) is the Anti Virus and Anti Spyware software running on the computer. You can try to disable them, and then try the updates again.

  Note: Runs the computer without antivirus software or firewall is a potential threat to the computer; don't forget to activate the security software after completing the troubleshooting steps and after you have identified the problem.

  Method 3:

  Try to reset your default security settings.

  Reference:

  How to restore the security settings the default settings?

  http://support.Microsoft.com/kb/313222

  Method 4:

  Reset Windows Update components.

  See:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  This should be it.

• After you run microsoft windows update 8, I get an error message when I try to go to the libraries using the Explorer

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  An update of Windows 8 running on my laptop. I don't know if it was successful or not, but I think that maybe not. Now when I go to the Solution Explorer to access my documents, music etc. libraries I get an error message saying "Documents / Video.library - ms is no longer ' I can always access your files goes to the icon of the drive C and drilling down, but why this library link does not work any more?

  Hello

  See the following instructions to Update libraries and solve this problem.

  1. in the file Explorer , select the folder parent of libraries in the left Navigation pane.

  In the right pane click on the right button of the library of Documents, music, photosand videos by default, and select the Remove option. Click Yes to confirm the deletion.

  (Note: this will not affect the folders or files in this library)

  2. in the Navigation to the left side pane, click on the libraries of parent folder and select restore default libraries option.

  This will refresh the default libraries and should solve the problem.

  If you added all files for libraries folders by default, you need to add these records.

  Let us know the results.

  Concerning

• Windows Media Player 9 Gets the error message - error Http 500

  I HAVE MEDIA PLAYER INSTALLED #9.   I HAVE WINDOWS 'XP', SERVICE PACK #3.   I CANNOT NOW RAISE ' ARCHIVE. NET'.   ALL THAT I GET IS "ERROR MESSAGE ' HTTP500."  That's happened?

  Never use caps - its considered bad manners, IE. you're shouting.

  HTTP 500 is unfortunately for you, a generic error that appears when the program you are using (WMP 9 in your case) cannot think of anything else to report.

  Just to complicate things a bit more, it is not a fault on your machine, but comes rather from the server and cannot be corrected on this machine.

  However, the upgrading to WMP10 or 11 and see if the same thing happens.

  See you soon,.

  Jerry

• Since I installed Windows Live Beta, I get various error messages, they are: 1) Wlsstarup.exe 'GetHeigh@CRImage@@BEHXZ' and Uxcore.dll. How to solve this problem?

  Since I installed Windows Live beta to run hotmail & messenger sometime in August, I get various error messages. They are:

  (1) Wlsstartup.exe GetHeight@CRImage@BEHXZ not found.

  (2) Uxcore.dll.  not found

  This causes me problems with Facebook games.

  How can I fix?

  Windows updates send me "service pack 1", that does not solve the problem.

  Since Firefox works my better games on Facebook, I installed.  She needed Windows Presentation Foundation, which has been

  taken out of SERVICE.  I turned it back on.  But, I think that the Windows Live Beta still causes me to be unable to do the things in games, I have to do to play/win them.

  Please help, thanks.

  The links I tried to use on your website had expired to do this, so I'm asking here.  Thank you Dee Penn

  Hello

  Here is the vista forums

  Please repost in Windows Live forums

  http://windowslivehelp.com/

• Windows Media Center - I get an error message indicating that Windows Media Center will not open

  Hello

  Quite simply, I get an error message indicating that Windows Media Center will not open. I tried the following: a system restore to a date where library worked with no success. I have run the System File Checker (sfc/runnow} wich ligate without flaws. Finally, I deleted the file mediacenterdatastore which has also no effect. The last thing I want to do is reinstall my operating system, once again, so has anyone out there have any more ways to fix this error... Help! Thanks in advance

  Robert,
  Thanks for reporting the good news. Enjoy!
   
  Saturday, June 19, 2010, 08:16:25 + 0000, bleedingwolf wrote:
   
  >
  >
  > Hi Barb,
  >
  > Windows 7 is now upwards and being run., you suggested that I would have problems with Netgear drivers that indeed I did. I have download the drivers for W7 on the Netgear site, but the wizard would not complete the entire upward. However, I thought would try to use the original installation, (vista compatible) and to my surprise and my pleasure worked.
  >
  > Cordially.
  >
  > Robert.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Cannot update Windows Vista kb971468 due to the error message 800B0100__

  Cannot update Windows Vista kb971468 due to the error 800b0100 of message

  Error code when you try to use Windows Update or Microsoft Update to install updates: "0x800B0001":
  http://support.Microsoft.com/kb/958045

  Vista SP1 or SP2 installed?

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft