Cannot track changes to primary and secondary school during the creation of point

Similar Questions

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• Differences in exchange rates between primary and secondary school in general ledger

  We have a little problem on our hands... we are implementing two great books with display dynamic, primary secondary and Canadian Dollar in USD.
  
  Exchange rate variances occur if for example, we consider significant operations at different points in time. We have no problem at the primary level. However, CAD to USD exchange rates are updated on a monthly basis and most likely, rates change in the month. Therefore, exchange rate differentials would happen frequently in the secondary accounts.
  
  We were asked by senior management, how these gaps would be treated by the EBS. I was wondering if you have any ideas that we are looking at events from accounting to ALS.
  
  Thank you
  
  Sanjib

  If the need was for the balance of the Canada and US dollar, you can use the option of Reporting currency instead of secondary accountant.

  Kind regards
  Chirag

• How to create the current header primary and secondary based on the title of each chapter?

  Hello
  I want that every page has a primary header running IE title of the book, while each subsequent page after that, also has a header running, but based on the title of a chapter.

  Book title                                                                 |  1

  First chapter title.  2

  Book title                                                                 |  3

  Second chapter title |  4

  Book title                                                                 |  5

  Third chapter title |  6

  Book title                                                                 |  7

  Fourth chapter title |  8

  .. and so on...

  
  Would be very happy for any help.

  Like, rachida

  Text variables - YouTube

• What is the difference between codec primary and secondary codec in cts-3000?

  Hello

  I'm a novice on telepresence. This community is only a place to resolve issues for me.

  What is the difference between codec primary and secondary codec in cts-3000?

  I know the primary function of the codec. but I don't know exactly of secondary function of codec.

  Help me please.

  Hello

  On a CTS 3000 system, you have 1 codec primary and secondary 2 codecs. Secondary codecs are responsible for the camera left and right and view the connections. They communicate the main codec via an Ethernet cable.

  Here is a guide to the installation of a CTS-3000 so that you can see the routing of cables.

  http://www.Cisco.com/c/en/us/TD/docs/Telepresence/cts_3000/guide/3000_assembly_guide/CH08_Routing_Power_and_Signal_Cables.html

  In addition, if you are interested to learn more about the telepresence as of last year, Cisco introduced the video CCNA certification track. Maybe it's something you are interested in.

  https://learningnetwork.Cisco.com/community/certifications/ccna_video

  PEI

• How primary and secondary channel IDE Windows XP home supposed to have?

  Original title: IDE

  Primary and secondary IDE channels how is xp family supposed to have?

  The information provided indicates a primary and secondary IDE channel, but I don't know where you got this information from.

  I suggest that you download, install and run the Belarc Advisor:

  Belarc Advisor - free PC Audit staff
   http://www.Belarc.com/free_download.html

  Belarc provide you with lots of information about your system. Once you have run it and you're on the computer profile summary, just underneath the main sections, you should see model system (right hand); just below will be your brand and model that he determined.

  Just below under the first point main Circuit Board 's advice, the model of motherboard.

  With this information visit the support site of the manufacturer of the computer and the search for documentation on your specific model, the manual should contain information about the number of IDE connectors on the motherboard.

  Similarly, you may be able to Google the motherboard model and locate the information you want.

  Kind regards

• WLC primary and secondary

  Is there a way to add controller dymanic interface using WCS and push down to the primary and secondary WLC?

  Can I use the same IP address for the dynamic interface on both controllers? Basically, this IP address use to request DHCP for clients.

  Thank you

  IP address of all dynamic interfaces must be different form each WLC. I add interfaces manually and don't use WCS.

• I cannot acess my main profile and you must use the guest account

  I cannot acess my main profile and you must use the guest account

  Hello

  There may be several error messages and/or other conditions however these methods
  should help you regain access.

  If you suspect any malware, a system restore is an option:

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  ---------------------------------------------------------------------------------------------------------------------------

  Other methods:

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• My macbook since a former apple ID, then I changed my name and my iphone has the new id apple - how can I change apple id name my macbook to match my iphone for home sharing?

  My macbook since a former apple ID, then I changed my name and my iphone has the new id apple - how can I change apple id name my macbook to match my iphone for home sharing?

  Thank you

  Cindy

  Welcome to the Apple community.

  You need to disconnect your old ID in System Preferences > iCloud > sign out and then sign in with your new code.

  You will also need to do this for iTunes, App Store, Messages, FaceTime, and books.

  To change your sharing settings go to iTunes > file > Colocation.

• Cannot install this hardware. An error occurred during the installation of the device

  Can someone please HELP ME - I get the following error message: cannot install this hardware. An error occurred during the installation of the device. They system cannot find the specified file.

  I am not able to connect any hardware. It started all of a sudden. I can't connect my mouse so it before I'm not able to use my computer.  He did the same thing when I put in a USB key, there was the same error message.

  If something is damaged? How can I resolve this - pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee.

  Looks like you may have a virus or other malware. Get your updated antivirus program and start safe mode.  Note that some viruses can hide from your normal antivirus program, so you really need to scan mode without failure.  To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode.  Then run a complete system scan.
  Microsoft has suggestions and offerings to
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
  Moderator Forum Keith has a few suggestions along this line to
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3
  If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem.  To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore.  Click on the box that says show more restore points.
  You can check the corrupted system files.  Open an administrator command prompt and run SFC if the above does not help. Click START, and then type sfc in the search box, right-click to SFC. EXE, then click on run as administrator. Then from the command prompt, type sfc/scannow.
  Finally if all else fails, you can look at the rather cryptic system event log.  To make, click Start-> Control Panel-> administration-> event viewer tools.  Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.
   
  I hope this helps.  Good luck.

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• Reference Dell backup and restore - "an error occurred during the creation of the backup of the system"

  I have a Dell XPS-8700 running Windows 7.  I bought the Dell Backup and Recovery Premium Edition.

  I was able to create a backup bootable (hot spare), and I can create a backup of data on my external hard drive.  However, whenever I try to create a backup on my external hard drive system, after about three seconds in the process, he returned: "an error occurred during the creation of the backup of the system.

  How can I create a backup of the system?  Why I get this error?

  Thanks for all the info. My situation sounds very similar to yours.

  I removed using Add/REMOVE programs in the control panel DBR and he removed cleanly.

  V1.7.1.2 downloaded and executed new facility.

  When I ran, it was my premium license key so he had yet to register and was not removed by uninstall.

  As before, Rescue Disk ran and installed the new partition (DBR_BOOT) on WD Passport.

  However, backup system immediately stopped with disconnected, missing target location or full. Tried several times...

  In any case, sounds like you have solved your problem, so you like OP should this brand this post/thread as answered. I will continue to post on my other thread.

• The 'Pro' fonts are losing black and Light versions during the upgrade to El Capitan

  Adobe software - it's great. Unusual to have a problem, but I have a. I often use the pro fonts because they are equipped with a wide range of variants - not just "normal, bold and italic" - but "light, normal, medium weight, fat, black, condensed and italic. During the transfer to El Capitan, all variants of light and black people of all the fonts seem to have been laid. If Adobe asked me, I would have these fonts returned to me :-) Anyone know a solution?

  Software creation Cloud installs variations less than standard fonts such as Minion Pro and Myriad Pro.

  You should look to see what are the versions of these fonts are available as part of your subscription to CC through Typekit. In InDesign CC, CC Illustrator and Photoshop CC, you can click on adding fonts Typekit option in the Type menu to start looking. And look for hundreds of other policies as well.

• How can I change the name I entered during the creation of my my name on behalf of our company Adobe ID?

  How can I change the name I entered during the creation of my my name on behalf of our company Adobe ID?

  See: How can I change the name of the account on behalf of our company?

• WLC primary and secondary - Config DHCP Scope

  Hi all

  WLCs: AIR-CT2504-K9

  We have therefore two 2504 s each in separate locations. Inside of each of the Access Points, we have configured one of the controllers of the WLC primary and the other as the secondary WLC tab HA. So my question has to do with the internal DHCP configured in each of the controllers scope.

  We only use the internal DHCP server of the WLCs for our Public Wi - Fi network. And I was wondering if I should configure the DHCP scope even in two controllers, or if they are supposed to be different?

  For example:

  Elementary WLC - extended DHCP: 10.12.202.110 - 10.12.202.200
  Secondary WLC - extended DHCP: 10.12.202.xxx - 10.12.202.xxx?

  The way in which access points are configured, they should only be attached to a controller or another. So that the way its set up it shouldn't be some APs on a single controller and some of the other. They should all be attached to the WLC even at any time. So, given that I can configure the same scope on both controllers?

  Any ideas or suggestions would be greatly appreciated!

  Thanks in advance,
  Matt

  Yes, you can set up this way, as long as you don't expect not so much operational WLC & customer service at the same time.

  If you think to expand this network of comments, I suggest you stay away from using DHCP internal like these WLCs has ever made to use as complete apart from entire DHCP servers in large scale networks.

  HTH

  Rasika

  Pls note all useful responses *.