Captioning is not going on two lines?

Similar Questions

• BlackBerry 10 Q10 Message text box does not scroll past two lines

  When you type a message in the message text box, the text does not scroll to the 3rd entry line until the line is completed. I find myself typing blind to line 3 of my message until the line 3 is full... then it scrolls to the top and becomes visible in the message text box. Any suggestions?

  Had the same problem.  You must have changed the font size of your device to a point 10 or above fonts.  If you set it to original font size which is 8, it works perfectly again.  IHAVE that mine now set at 9 and it the text field scrolls correctly now.  It must be a bug in Blackberry software so if you read these messages please fix it as I'd rather watch 10-point font.

• How to get Wordpad to not skip two lines when press enter in Windows 7?

  How to not skip two lines when I hit enter the cursor?  I'm making a list of titles without lines ignored.

  Original title: Windows 7, wordpad.

  Hello Thomasguy,

  Default Wordpad is set up for 1.15 lines after each carriage return. To change this 1 line do the following:

  1. open Wordpad

  2. on the look of Ribbon toolbar from wordpad in the Paragraph section

  3. just above the text alignment icons, you will see another set of icons.

  4. click the icon to the far right. This icon has a up and down on it and to the left of the photo icon.

  5. you should now see a list of spaces in the sentence. 1.15 is the default

  6. click on the space of 1 line.

  7. If you click the icon, to open it, you will see that a checkmark (tick) now appears next to the space of 1 line.

  8 when you now press Enter spacing should be 1 instead of 1.5

  This same icon, you can also change the space between paragraphs. The default value is 10pt (point).

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Hello! Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  Hello!

  Is it possible to convert a trace made with the Brush tool a blob in a simple brush trace (a simple vector line - not two lines with a filling in between)? Thank you very much for your help!

  No, I don't think.

• Hyperlinks on the two lines does not not on pdf

  I create hyperlinks (to web pages) in InDesign CS 6 then pdf it. However, all links spread over two lines do not bind to the full hyperlink for example they only link to the first line.

  For example:

  http://EUR-Lex.europa.EU/legal-content/en/

  TXT /? URI = celex:32006 L 0025

  When I got the InDesign pdf file in Acrobat (with hyperlinks marked in the window) it links only to the first line, for example

  
  

  http://EUR-Lex.europa.EU/legal-content/en/

  
  

  Another example:

  
  

  www.PLOSOne.org/article/info:doi/10.1371/

  Journal.Pone.0053379

  
  

  The really strange thing is that in some cases it works OK for example:

  
  

  www.NHS.uk/ipgmedia/national/Epilepsy%20Action/Assets/

  photosensitiveepilepsy.PDF

  Can anyone shed some light on this for me - it's really frustrating...

  Thank you

  Sheila

  It must create the hyperlink in the hyperlinks Panel (window > interactive > hyperlinks) as a URL. If you have not done so, Acrobat tries to read the URL from the text in the PDF file and will stop with each statement or other specific characters.

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• When you type an e-mail, when I go to the next line, it jumps two lines instead of a single line. How can I fix it?

  I was typing an email and when I would go to the next line, it will skip two lines instead of a single line. How can I fix the problem?

  I'm not sure that you understand the problem. Could include a screenshot of it just after what happens?

  If you need help to create a screenshot, please see How to make a screenshot of my problem?

  Once you have done so, attach the file to screen shot saved to your post on the forum by clicking on the button Browse... under the box to post your reply . This will help us to visualize the problem.

  Thank you!

• How do I put the sender first and second in Inbox display two lines by?

  I do not what is talking about the subject.  I want the sender name first and in large print.  The subject is first on this computer.  The sender's name is first on another computer.  How to control the display of two lines?

  Ok. I can't help you. It is a forum XP and Windows Live Mail Forum is located here:
  http://windowslivehelp.com/forums.aspx?ProductID=15

• When computer boots up I get TWO lines for "Microsoft Windows XP Home Edition.

  I reinstalled Windows XP and somehow it reinstalled on my D: recovery partition! Craps! In any case, now, when I turn on the computer, it is written "Please select the operating system to start:" and then has two lines for Microsoft XP Home. The 1st line log on the D: partition. So I am forced to choose the 2nd line to work on my c: to ole. How can I remove the 1st line? 2nd, is my tour recovery partition? and what does one do?

  Please help!

  Thank you!

  How to change the boot.ini file: http://support.microsoft.com/kb/289022

  Currently, your .ini file may contain:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Windows XP "/ fastdetect
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Your .ini file must contain the following:

  [boot loader]
  timeout = 30
  default = multi (0) disk (0) rdisk (0)partition (1)\WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Windows XP "/ fastdetect

  Note: The value of 30 seconds timeout can be set to 0 and you will start automatically on windows (do this after checking the cahnges you make are what you want).

  J W Stuart: http://www.pagestart.com

• How to set the title button in two lines

  Hi all

  Someone can give me a code example or an idea that can help me to define the button title in multiline, mean that I want to print the date currunt as '2009-12-11 11:42:45 ' in two lines on the title of the buttonfield.

  I tried to use the "\n" character to break the line, but it was not a job for me. I put in a title, for example,

  String title = "/ tej n Hi how are you?

  ButtonField btn = new ButtonField (title);

  Add (BTN);

  But it's not working.

  Thanks in advance,

  Using custom field, we can achieve it. More wire has the solution for you

  http://supportforums.BlackBerry.com/T5/Java-development/multi-line-ButtonField/m-p/94564#M10529

• The two lines EX90 and add speed dial

  My friends, I need help in this case, we replaced digital phone with EX90 new to our general manager. but there is some functionality was available on the old phone:
  1 - the old phone has buttons around the screen as a speed dial buttons for certain numbers of employees
  2 - the old phone has two lines one private and one is the direct line

  Here, he wants the same features on the EX90:
  1. I configured the favorite on the EX90 as a shortcut, but he wanted the speed Dial buttons appear directly on the screen for

  press about this directlry.
  2 - I have configured the EX90 on CUCM and added the second row but he only appeared, if there is a method to allow

  calls on the (direct and private calls on different lines) EX90

  Please I need your urgent help

  The DefaultPanel Option is only in more recent versions of TC software, I do not remember what version it appeared in, but it is there in the last TC7.1.3.  If you don't, you probably use an older version of software on your EX.

  It is located in the web interface under Setup, System Configuration, UserInterface touchscreen Panel default.

  The options are: none, last, list of contacts, MeetingList and keyboard.

  The option of contact list

  Another option (although, as for a simple speed dial) is the installation Service that puts a button in the upper left corner of the touch screen.  Note: Only facility Service 1 is available in the Panel even if you configure 5 of them.

  Wayne
  --
  Please rememeber the frequency responses and mark your question as answered as appropriate.

• Text captions do not appear when it is used with text entry areas (C3)

  I'm building a simulation of accounting system where the learner needs to enter data.  I entered text boxes (one per blade) appearing all the time on the slide.  I have captions that tell the student what to enter, but are synchronized with the audio, then a final text legend who told them how to go to the next slide (press tab, etc.).  My problem is that the text captions do not appear if they are configured to appear after the text input area appears on the time line.  Has anyone experience this problem?  Any suggestions?

  We have created a work around using a highlight box where the text entry box will appear later - so that all the text captions and text entry boxes appear at the same time.  Should be an easier way!

  Hello

  Yes, we see this question over and over again. Especially with new users.

  You need to come to terms with the works of Captivate. Imagine it's like a stream flowing by. Expect a legend to appear, but something stopped the flow. Blocking is your text box for entry (TEB). He interrupts the slide, waiting for your user to enter data.

  The key here is that you need to adjust the point break for ETB.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• How to compare two lines in PL/SQL?

  Hi all
  
  How to compare two lines in PL/SQL? Is there a method I can use to compare their column by column instead?
  
  Any comments would be much appreciated.

  PhoenixBai wrote:
  By lines I mean, two rows of the same table!

  Ah, finally, we get a bit more useful information

  and I need to compare the column by column to see if there is a difference between these two rows.

  Like this, you mean?

  SQL> ed
  Wrote file afiedt.buf
  
    1  with data as (select 1 as id, 'A' as dta, 'B' as dta2 from dual union all
    2                select 2, 'A', 'B' from dual union all
    3                select 3, 'B', 'C' from dual)
    4  --
    5      ,chk as (select &id1 as id1, &id2 as id2 from dual)
    6  --
    7  select case when (
    8    select count(*)
    9    from (
   10      select dta, dta2
   11      from data, chk
   12      where id = id1
   13      minus
   14      select dta, dta2
   15      from data, chk
   16      where id = id2
   17      )
   18    ) = 0 then 'No Difference'
   19          else 'Difference'
   20          end as check_result
   21* from dual
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 2
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 2 as id2 from dual)
  
  CHECK_RESULT
  -------------
  No Difference
  
  SQL> /
  Enter value for id1: 1
  Enter value for id2: 3
  old   5:     ,chk as (select &id1 as id1, &id2 as id2 from dual)
  new   5:     ,chk as (select 1 as id1, 3 as id2 from dual)
  
  CHECK_RESULT
  -------------
  Difference
  
  SQL>
  

  My only concern is the result of this sql. East - reliable? It can really be used to differentiate the two lines? I mean, the result would be the same, as I do with Java?

  Not sure what you mean by "reliable"? SQL is not some kind of generator of random result (by derogation from the use of the DBMS_RANDOM package). If you ask him if 1 + 1 = 2, then it will always give you the right answer.

• Report of rows in two lines

  Dear members,
  
  Is it possible to create a report of the region showing the two lines (I have very long to see... fileds)
  
  Thanks in advance.
  
  Best regards
  Johann

  Hello

  Ok. The report is based on the following SQL query:

  SELECT
    EMPNO,
    ENAME,
    JOB,
    SAL,
    COMM,
    MGR,
    HIREDATE
  FROM EMP
  

  Note that there are 7 columns.

  Now, go to components shared, models and click on create. Select the Type of model 'Report' from scratch, enter a name for the new template, select "Custom 1" as the class and select "Named column (model line)" as the Type (is important), then click on create. " After loading the list of templates, select your model.

  You will get some complete default settings. Remove these and replace them with the following text:

  Model line 1:

  <tr><td>#1#</td><td>#2#</td><td colspan=3>#3#</td></tr>
  <tr><td> </td><td>#4#</td><td>#5#</td><td>#6#</td><td>#7#</td></tr>
  

  Before the lines:

  <table>
  <tr><td><b>EMPNO</b></td><td><b>ENAME</b></td><td colspan=3><b>JOB</b></td></tr>
  <tr><td> </td><td><b>SAL</b></td><td><b>COMM</b></td><td><b>MGR</b></td><td><b>HIREDATE</b></td></tr>
  

  After the lines:

  </table>
  

  Lines first generated before parameters: these are the titles. Note that we specify field names because it is no longer available to us.

  Then comes the setting of model line 1 - once for each line. Note that I used #1 #-#7 #. These correspond to each of the 7 columns in the SQL query.

  Finally, comes the setting after lines - this deadline just things off.

  The style only I added is the B tags in the title. You can use the class = "txxxxxx" of your theme. Also note that I did nothing with the pagination settings - if you need them, they can be copied directly from another model of report as in the same way, they will be awarded.

  Since you have the parameters of stop/stop the report and that, among those, you can use #1 # etc. to represent your data, you should see that you can build just about ANY format you need, use one styles you like AND you are not limited to the use of the table/tr/td tags - as long as you build the html correctly , any tag would (for example lists UL/LI or drop-down lists SELECT / OPTION).

  Andy