Captivate 5.5 incorrectly reported in SumTotal LMS review results

Similar Questions

• Captivate quiz - adding an additional field to report on the LMS

  I have a Captivate 100 question quiz to report to an LMS.  We can get all the information with a report of interactions between all.  The contractor giving the test wants to be able to refer to the section of a manual which the questions come from. The only way I was able to do this so far is to put the mention of the issue at the end of the issue, and then change the font to white color.  And then it appears on the report of the LMS.  Is it possible to add another field or something that will also be visible on the report of the LMS, but is not visible to the person who takes the quiz?

  There is currently a bug in Captivate 7 (maybe even in 6) which causes this problem where an interaction also ID change the slide following, as well. If all goes well, that will be corrected in version 8.  But in the meantime, you just go down the list of the IDS of Interaction and make sure they are all unique, that otherwise you will get error messages.  I use the function of Interaction ID prefix in Quiz settings do to precede rights holders Captivate unique number to each question in the quiz.  The prefix that I use is a code which clearly indicates which module this quiz question comes.  But you can go further and indicate what the question is about whether you want.

• What is the difference between "Reporting to the LMS as Score" vs "Reporting to LMS as a percent.

  What is the difference between "Reporting to the LMS as Score" vs "Reporting to LMS as percent" when you take a quiz.

  Im trying to decide whether to click on the score or the percentage option. My LMS I would report a grade of the user.

  Thank you

  Accuracy of 5.5 is the same as the percentage of score. And as far as I know, you will not need the patch for 5.0.

  Lilybiri

• Incorrect score from the LMS registration

  Our Organization is using SuccessFactors LMS to deliver e-learning courses. We are currently converting our HTML5 courses and are having problems with the LMS record the score incorrectly. We don't experience these same issues with courses published in flash.

  I created a course with question 1 quiz (10 points) - when I tested it in the LMS answering all the questions correctly, he recorded as complete with a score of 100 (SuccessFactors records the percentage scored rather than points).

  Then, I created a course with 5 questions quiz (50 points) - when I tested it in the LMS answering all questions correctly it registers as full, but with a score of 80. We cannot work where tire this partition, it is does not concern the number of percentage points.

  Courses have been built in Captivate 9, published in HTML5 and uses the parameters for the quiz:

  

  

  

  Maybe you could try to send the score ONCE instead of rattling of the SGA each slide.

  There is an option in the Quiz > Reporting screen to change the SCORM model called something like SendDataAtEnd. It sends only the score to the LMS once for each quiz, to the and.  It is perhaps interesting to see if SuccessFactors has this issue, because Captivate continues to send this data all the time.

  I'm clutching at straws here because this LMS does NOT Act that way.

• What are the variables system will report to the LMS for the completion of the course, when there is a test (developed with conditional actions manually).

  I developed a course where the learner must pass the test to complete the course in LMS.

  I developed a quiz (quiz developed using conditional actions) manual.

  Now I want my course should show in LMS completion status, only after the learner either in quiz.

  How do my report course to the LMS of completion criteria?

  I use 6 Captivate and LMS is CSOD.

  I tried to include in quiz option is not working for me... anyone have any ideas to fix this?

  Thanks in advance

  Have you checked that Panel Advanced Interaction, please? All of the marked objects that are indicated to be added to the total of the Quiz are part of all system Quizzing variables. Insert a slide to score in your project and check the result when previewing in the browser or after publication.

• Report quiz V6 LMS as finished after 3 failed attempts

  I have a pure quiz in captivate 6 which allows to the learner to take 3 times only for example

  Attempt 1 = fail = incomplete report of LMS

  Attempt 2 = fail = incomplete report of LMS

  3 = failure = incomplete report of LMS attempt

  What I need is not logical, but...

  I need the LMS to

  Attempt 1 = fail = incomplete report of LMS

  Attempt 2 = fail = incomplete report of LMS

  Attempt 3 = failure = report all LMS

  Is this possible?

  Happy to try anything with instructions

  Thank you in advance and I hope that the above is clear enough

  JO

  Based on the note, it's pretty impossible. You can use the same approach but have a button on the additional slide with the necessary score attached to it. But this means that it will be saved as a quiz with success, which is not the case.

  I think in this case you need to explore the functionality of the LMS used, there are ways to achieve this, but probably not with them.

  Lilybiri

• iPhone app Messages incorrectly reports that the messages are not delivered

  I send text messages with the Messages app on my iPhone.  I've never had a problem until recently.

  Recently, all of my text messages are marked by a red error message "not delivered".  But the beneficiary is in fact receive these messages.

  I want a solution to this problem (if you have one).

  Here are some additional details:

  * I recently made two changes to my iPhone 6, and I wonder if they are related to my problem:

  1. go to iOS 9.3.5

  2 change my cell number

  * I have T-mobile and I "call wifi" enabled.  Usually, I connect using "wifi-calling."

  Hi adaviding,

  Looks like you are having some incorrect Messages notifications appear on your sent messages. Not too sure if recent changes have something to do with it, but I would check your message settings to check everything is in order, it. You can also take a look at the link below. Even if your messages are sent, you can always follow the steps then the message "not delivered" can be resolved. You can also try a simple reboot of your device.

  Restart your iPhone, iPad or iPod touch

  If you can't send or receive messages on your iPhone, iPad or iPod touch

  Please use the Apple Support communities to post your question. These measures should have your Messages app works as expected. Good day.

  Thank you for using

• Hello, I would like to know how host or let users access to captivate demos work without host on a LMS System?

  I have created a number of videos of Captivate and published these, they are in files Zip - is there anyway to send a link or place a single file on the shared drive to allow access and use captivate?

  Thank you

  Ash

  Using a shared LAN drive as a server for the release of Captivate location often eventually questions. If your content is focused on the SWF, all end users will need to configure the LAN drive as a trusted location in their Global Flash security settings or links may not work etc etc.

  Your best option is to download your content on a web server, either the company intranet or internet General and reschedule.

• Oversized incorrect report?

  Last Thursday, I reduced some VMs according to the oversized report that included the vcops VMs.  Now, I did not change my efficiency and now reports have weird numbers on them for vCPU configured as some of the machines with 2 vCPUs week last broadcast 1.9 vCPUs on the report now when they have only 1 vCPU and so on.  Any ideas what's happening?  Takes the VMs vcops up to 1 vCPU a problem?

  Oversized reports work on average values calculated over a period of time. This time interval is configured in the Configuration section for views no trend. Then, even when you make changes, it takes time so that it is reflected in the result. That said, a change of configuration of VCPU should get reflected immediately if you chose the 'last known capacity' for the determination of capacity under Configuration. Please check this setting. Make sure it's not average.

• plugin check incorrectly reporting plugin vulnerable

  PluginVLC Web VLC media player Web Plugin 2.1.3 is vulnerable and invites me to go on vlc site to download 2.1.5. I did this a few days ago and have installed 2.1.5 but the plugin check keeps thinking that I'm still on 2.1.3. and always tells me to update a vulnerable plugin

  Everything seems to be fixed now with the latest versions of vlc and flash. Thank you...

• Siri anniversary incorrect reports

  Hey guys,.

  I encounter this problem with Siri on my birthday.  I do not want to see my real birthday in this topic of discussion, so I'll just give a date for example.  When I ask her "what is my birthday," she said "August 20".  However, my actual birthday is August 17.  I did some research and it says I have to go into the settings of my Apple ID and change my birthday on a specific date.  When I'm there, however, he reads my birthday August 17.  What is everything?  So I try to change it anyway as a measure to try to see if she straightens things.  I ask Siri again "when it's my birthday" and Siri signals always on 20 August.  Can someone, please?

  Thank you

  ViRaLGucci

  Most of that in respect of the 'your' Siri information is local to the device, to your Contact. If I ask Siri, "What is my birthday" Siri brings up my contact.

  I could check here and see if my birthday is correct.

• Chrome browsers windows incorrectly reported to be opened

  When I try to uninstall a program, it starts but the finishes due the following message "all browsers Chrome should be closed in order to complete the uninstalltion. Please close all windows of the Chrome browser. But no aoe open. ???

  Checked in Task Manager (right click on the taskbar, select "Start Task Manager") that chrome.exe does not appear as a process still open?

• Muse incorrectly reports that my photoshop file was saved without compatibility turned on.  Muse do not place the file.

  In the photoshop preferences, I have defined maximum compatibility "always."  Muse won't matter, "place" my folder.  I changed my preferences to "ask" re "saving as" with max compatibility so that I could always check the max compatibility has been verified during registration.  Muse will not import the photoshop file.  Is this a bug?  Is there a solution?

  Hello

  When importing the file into Muse, what is the error/warning you receive. Could you please provide the full message or a screenshot of the error/warning popup

• Captivate allows us to perform formatting of Quiz review?

  While reviewing the quiz, maybe it's to place a check mark next to the correct answer and a red X next an incorrect selection?

  Yes.  If you upgrade to 5.5 Captivate. It's the way it looks now.

• REPORT NEED BACKUP DAYS - Diferent results of control/catalogue n

  Hello

  I have a database of Oracle running on 10 gr 2 and using a catalog RMAN backups, all 5 recent FULL backups have been made as expected, no errors, no warnings.

  . When I run 'REPORT NEED BACKUP DAYS 2' on RMAN using the catalog they show this:

  Report of the files whose recovery needs more 2 days of archived newspapers

  Days of files name

  ---- ----- -----------------------------------------------------

  It's OK, because I don't have the data files which need more 2 days of rest to restore archives.

  So... when I try the same command using NO catalog, just the controlfile (rman target = /):

  Days of files name

  ---- ----- -----------------------------------------------------

  1 94 /cx4_01/oradata/prod/dados/system01.dbf

  2 94 /cx4_01/oradata/prod/dados/undotbs01.dbf

  3 94 /cx4_01/oradata/prod/dados/sysaux01.dbf

  4 94 /cx4_01/oradata/prod/dados/users01.dbf

  5 94 /cx4_01/oradata/prod/dados/users02.dbf

  6 94 /cx4_01/oradata/prod/dados/users03.dbf

  7 94 /cx4_01/oradata/prod/dados/adm_data01.dbf

  8 94 /cx4_04/oradata/prod/dados/ln_homolog_data01.dbf

  9 94 /cx4_04/oradata/prod/indices/ln_homolog_index01.dbf

  10 94 /cx4_04/oradata/prod/indices/ln_index01.dbf

  11 94 /cx4_01/oradata/prod/dados/dados_p01.dbf

  12 94 /cx4_01/oradata/prod/indices/indices_p1_01.dbf

  13 94 /cx4_01/oradata/prod/dados/ln_data01.dbf

  14 94 /cx4_01/oradata/prod/dados/gkoscf_dtau01.dbf

  15 94 /cx4_04/oradata/prod/indices/gkoscf_indx01.dbf

  16 94 /cx4_04/oradata/prod/dados/gkoscf_data2_01.dbf

  17 94 /cx4_01/oradata/prod/dados/kisacommerce_data_01.dbf

  18 94 /cx4_04/oradata/prod/dados/TS_DW01.dbf

  19-94 /cx4_04/oradata/prod/indices/TS_DW_IX01.dbf

  20 94 /cx4_01/oradata/prod/dados/klgdwetl_data01.dbf

  21 94 /cx4_04/oradata/prod/indices/TS_WSA_IX01.dbf

  22 94 /cx4_01/oradata/prod/dados/TS_WSA01.dbf

  23 94 /cx4_04/oradata/prod/dados/NFE_DATA01.dbf

  24 94 /cx4_01/oradata/prod/dados/NFE2_DATA01.dbf

  25 94 /cx4_01/oradata/prod/dados/NOTAMAX01.dbf

  26 94 /cx4_04/oradata/prod/dados/AUDIT_DATA_01.dbf

  I did the complete catalogue of rsync, but the same thing happens... Anyone, no matter what idea? Why when I'm not logged on catalogue, the command doesn't work?

  Best regards!

  PS > please excuse my bad English.

  I changed the DBID and now the report of rman command works as expected.