Oversized incorrect report?
Last Thursday, I reduced some VMs according to the oversized report that included the vcops VMs. Now, I did not change my efficiency and now reports have weird numbers on them for vCPU configured as some of the machines with 2 vCPUs week last broadcast 1.9 vCPUs on the report now when they have only 1 vCPU and so on. Any ideas what's happening? Takes the VMs vcops up to 1 vCPU a problem?
Oversized reports work on average values calculated over a period of time. This time interval is configured in the Configuration section for views no trend. Then, even when you make changes, it takes time so that it is reflected in the result. That said, a change of configuration of VCPU should get reflected immediately if you chose the 'last known capacity' for the determination of capacity under Configuration. Please check this setting. Make sure it's not average.
Tags: VMware
Similar Questions
-
Recoverable ability in oversized VM report
I have a question how the total recoverable CPU is calculated in the oversized VM report. For example, I have a cluster with 1414 hearts put into service. Recommendation of the CPU is 1084 and recoverable CPU is 610. I expect this total out equal (provisioned = recommendation + recoverable) but not nearby. I see I have some VM with 1 core, recommendation will be 1. I think that the recovery would be 0, but many cases, it is also 1 Although nothing could be claimed. Anyone know why this is? I want to get an idea of why this seems inaccurate.
Thank you
What is the powerstate of these virtual machines where the vCPU allocated 1 vCPU and recovery is 1 vCPU? It might suggest a VM decomm. vROPs will make this suggestion for PoweredOff and Idle VMs.
I don't get too stock recoverable ability in vROPs. I really like the suggestions, but such people are rarely comfortable with resizing of a virtual machine to 8 vCPU until 1 vCPU. Then I usually start to reduce by half the specs and see how it works with half of resources once. If after the downsizing of a virtual machine at half the size, you feel comfortable cutting it in half again, go there. This is my approach at least
See you soon,.
The f
-
iPhone app Messages incorrectly reports that the messages are not delivered
I send text messages with the Messages app on my iPhone. I've never had a problem until recently.
Recently, all of my text messages are marked by a red error message "not delivered". But the beneficiary is in fact receive these messages.
I want a solution to this problem (if you have one).
Here are some additional details:
* I recently made two changes to my iPhone 6, and I wonder if they are related to my problem:
1. go to iOS 9.3.5
2 change my cell number
* I have T-mobile and I "call wifi" enabled. Usually, I connect using "wifi-calling."
Hi adaviding,
Looks like you are having some incorrect Messages notifications appear on your sent messages. Not too sure if recent changes have something to do with it, but I would check your message settings to check everything is in order, it. You can also take a look at the link below. Even if your messages are sent, you can always follow the steps then the message "not delivered" can be resolved. You can also try a simple reboot of your device.
Restart your iPhone, iPad or iPod touch
If you can't send or receive messages on your iPhone, iPad or iPod touch
Please use the Apple Support communities to post your question. These measures should have your Messages app works as expected. Good day.
Thank you for using
-
Captivate 5.5 incorrectly reported in SumTotal LMS review results
If the user marks a zero (0) in the review of Captivate 5.5 results in the LMS SumTotal is reported as being incomplete, with a score of---(tableau de bord, tableau de bord, tableau de bord).
Incomplete is correct, but the score-tells me that the note of zero one) is not reported to SumTotal, or b) Sumtotal interprets the score of zero as a value null or something.
I agree that the liklihood of failure in the test with a zero is highly unlikely, but our QA group rejects the course because of this.
Someone has encountered this and if so, how can it be solved?
Thank you
Frank
Test the same course in SCORM Cloud to see if it will show the score as a zero.
I think that this problem may be due to the way that sum Total poster this score and not the way Captivate is present.
-
plugin check incorrectly reporting plugin vulnerable
PluginVLC Web VLC media player Web Plugin 2.1.3 is vulnerable and invites me to go on vlc site to download 2.1.5. I did this a few days ago and have installed 2.1.5 but the plugin check keeps thinking that I'm still on 2.1.3. and always tells me to update a vulnerable plugin
Everything seems to be fixed now with the latest versions of vlc and flash. Thank you...
-
Siri anniversary incorrect reports
Hey guys,.
I encounter this problem with Siri on my birthday. I do not want to see my real birthday in this topic of discussion, so I'll just give a date for example. When I ask her "what is my birthday," she said "August 20". However, my actual birthday is August 17. I did some research and it says I have to go into the settings of my Apple ID and change my birthday on a specific date. When I'm there, however, he reads my birthday August 17. What is everything? So I try to change it anyway as a measure to try to see if she straightens things. I ask Siri again "when it's my birthday" and Siri signals always on 20 August. Can someone, please?
Thank you
ViRaLGucci
Most of that in respect of the 'your' Siri information is local to the device, to your Contact. If I ask Siri, "What is my birthday" Siri brings up my contact.
I could check here and see if my birthday is correct.
-
Chrome browsers windows incorrectly reported to be opened
When I try to uninstall a program, it starts but the finishes due the following message "all browsers Chrome should be closed in order to complete the uninstalltion. Please close all windows of the Chrome browser. But no aoe open. ???
Checked in Task Manager (right click on the taskbar, select "Start Task Manager") that chrome.exe does not appear as a process still open?
-
In the photoshop preferences, I have defined maximum compatibility "always." Muse won't matter, "place" my folder. I changed my preferences to "ask" re "saving as" with max compatibility so that I could always check the max compatibility has been verified during registration. Muse will not import the photoshop file. Is this a bug? Is there a solution?
Hello
When importing the file into Muse, what is the error/warning you receive. Could you please provide the full message or a screenshot of the error/warning popup
-
Weekly report for VMS oversized
Hello
On the basis of the use of the UC should send me weekly report for virtual machines that are oversized. but in the report itself, it counts only for these vms, which was oversized for the point
say, if I run this report at 08:00 on a particular day, then it checks for the period from 08:00-08:01 AM
Switch to the view of the oversized VM (content---> views) report
The view that creates the oversized VM report is called "Machine virtual Rightsizing CPU, memory and disk.
Change that view and go to 'Time settings', you will see that it is probably set to 1 minute. Change to the length you want for your report. In my environment, I use "45 days" as an example. After registration, rerun the report, and you should be good.
-
Virtual Center reporting incorrect size LUN
Hi, my VC reports incorrect LUN sizes.
The cluster, that I'm looking has 3 hosts ESX 3.01 in it. VC is version 2.0.
Please see the disparity between VC and ESX hosts when I connect to them and check customer data using VI3 store sizes:
Virtual Center
Data store
Capacity
Free
Datastore1
79,75
62,38
Datastore2
79,75
41.88
Datastore3
239.75
21.37
Host1
Data store
Capacity
Free
Datastore1
79,75
62,38
Datastore2
79,75
25.88
Datastore3
239.75
17.81
Host2
Data store
Capacity
Free
Datastore1
79,75
62,38
Datastore2
79,75
41.88
Datastore3
239.75
21.37
Host3
Data store
Capacity
Free
Datastore1
79,75
18.9
Datastore2
79,75
25.88
Datastore3
239.75
17.93
If Virtual Center and ESX Host2 show the same info but Host1 and Host3 have different values.
I noticed when I tried cold migrate a virtual machine off the coast of Datastore3 to Datastore1, and the operation failed. As VC and Host1 and Host2 show 62,38 GB free I am inclined to believe that Host3 incorrectly reports. This does not explain why the migration failed.
When you look at the storage configuration, all targets SCSI and LUN ID are identical for all hosts in addition to Host3 which is different. I asked the storage team to correct this. I don't want to put off more to the case where I muddy waters.
Can someone tell me what they think can happen here?
Do you know how Virtual Center decides which is the free space on the data store and how he questions the hosts? On average this out or what?
Thanks for any help you can give.
Dave
See this KB http://kb.vmware.com/kb/1003490
If you are worried about anything, just vmotion the VMS ' soff to another host, leaving this host empty and then restart the agent of the VPA.
-
Firefox is incorrectly recognized as mobile device
The use of Firefox in version 9.0.1
Some sites are considered if I where using my mobile phone – for example, if I go to DirecTV.com, I see their Mobile site design... This does not happen with IE or Chrome.Also the sparatic problems with the site style sheets shows does not correctly.
Gmail.com is also not recognize as valid browser firefoxYou have a user agent that is corrupted by the general.useragent.override pref and which identifies you as: undefined GoogleToolbarBB
See:
-
The wrong version of Firefox is reported to web applications.
Websites meet their applications require Firefox 4 +, however, 8.0 is installed on this PC (Windows Vista). This has happened on many commercial Web sites. Details of the system on this site (Firefox) lists the version 3.05.
See also:
-
I tried to use Google. He told me that my browser was is no longer supported. Then I clicked on the Google search which is set as my homepage. He tells me that my version of Firefox is no longer protected against threats. So I went to a website that told me my browser name and version. Firefox reports that it is version 3.5 instead of 6.0
https://support.Mozilla.com/en-us/KB/websites+or+add-ons+incorrectly+report+incompatible+browser
-
Hello
When I use the DXDiag.exe to check the DirectX version of my hardware version, the version reported is not correct. I then tried Windows Experience Index and it also reports the wrong version. The hardware manufacturer said that the material is DirectX 11 but DXDiag.exe and WEI report DirectX 10.1. Is this a known issue? How can I fix it?
Thank you
Christi
Found the answer!
When you run the diagnostic DirectX (Dxdiag.exe) tool on a computer that is running Windows 7 or Windows Server 2008 R2, the diagnostic tool incorrectly reports a device DirectX 11 as a DirectX 10.1 device. This incorrect version information is displayed in the DDI field on the view tab. This problem is only a reporting error and this does not affect the functionality of hardware or software DirectX 11 graphics card.
There is a fix for this problem, for more information about the hotfix, see the following article on the Microsoft web site:
975243 DirectX diagnostic tool incorrectly reports DirectX 11 as DirectX 10.1 devices devices on a computer that is running Windows 7 or Windows Server 2008 R2
Windows experience index also has the same problem, and Microsoft is aware of this.
-
Incorrect disk space: Windows 7 Ultimate
Hello
I have Windows 7 ultimate and for some reason any my disk space incorrectly reports. I did not all related things updated level or record...I ran a number of different things. As the following which have been recommended by MicrosoftMethod 1:
Run Check Disk to examine if there are any errors on the hard drive.
Check a drive for errors
http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors
Method 2:
Perform clean up to free disk space occupied by unwanted system files.
Delete files using disk cleanup
http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup
Method 3:
Open the troubleshooting of System Maintenance Utility
http://Windows.Microsoft.com/en-us/Windows7/open-the-system-maintenance-Troubleshooter
Diagnose and repair Windows files and folders problems automatically
http://support.Microsoft.com/mats/windows_file_and_folder_diag/
Here are a few screenshots. My drive is a SSD 240 GBThis is the size of the trees and watch 138.9 GB used.I did CHKDSK and here are the results:Windows has checked the file system and not found any problems.
234324991 KB total disk space.
143808224 KB in 336323 files.
169248 Ko 44968 index.
0 KB in bad sectors.
518551 KB in use by the system.
65536 KB occupied by the log file.
89828968 KB available on disk.
Any comments would be greatly appreciated!
Thank you
Brian
Very understand what the problem was. It's rollback Rx PC. A frustrating experience... Thank you all for the comments.
Maybe you are looking for
-
In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect. If I try to
-
Hi all I always use FL studio. I think the conversion of Logic Pro. I need your help with a couple of points listed below: 1 - What is the best version to buy. 2 - What about the plugins, synths and packs. In FL studio, I had the habit of checking th
-
Compaq D530 Small Form Factor: Ram high density is not compatible?
What ram high-density compatible with it? I was about to buy high density 1 GB DDR400 PC3200 400 Mhz 184pin memory Ram 2.5V Fund, it warnings about the compatibility with because it's high density. I tried to look into the specs and found nothing. Co
-
The VIsta calendar reminder is not pop up after the mode "Eve"
Hello I had put a task reminder in the calendar from Windows Vista program. But did not recall. I put usually PC mode 'sleep' when finished. So I tested if that did anything. So, I had an appointment for 12:15 and had reminder 5 minutes before. Put
-
Could not download the NVIDIA graphics driver.
OT: NVIDIA driver. He said a problem of NVIDIA graphics driver. so I click it and it says press here to fix problem.but he repeats to me could not DOWNLOAD make sure your connected to the internet and try again.but I am connected can help you