Similar Questions

• Player Windows Embedded 10.1.2 breaks down using the typewriter tool

  Since 10.1.2 drive my typewriter tool documents do not work correctly in an integrated Adobe Reader window, for example in Firefox or Internet Explorer.

  Open the first file to http://www.ld-didactic.de/software/1.pdf shows the typewriter as usual tool window.

  Open the second file to http://www.ld-didactic.de/software/2.pdf does not display the typewriter tool window more.

  Also, the first new opening document will not display the typewriter again tool window. Instead the player often crashes while loading several documents of typewriter or by closing the built-in player.

  I tested it with Adobe Reader 10.1.2 in Firefox and Internet Explorer on Windows Vista and Windows 7 x 64 systems. He has worked with Adobe Reader 10.1.1.

  Can anyone reproduce this problem?

  Michael

  This issue seems to be fixed with Adobe Reader 10.1.3.

  Thank you

• 35.0 Firefox uses 100% cpu on Mac Yosemite 10.10.1 then either breaks or needs force quit.

  I had this problem since installing Yosemite and using 34.0.5. I upgraded yesterday to 35.0 but still the same problem. Firefox will work happily for a while and then all of a sudden will use 100% cpu. I disabled all extensions and plug-ins and that made no difference. If I use Java (8-25), it will usually make it crash but not always.

  To make things worse, the accident report appears in Greek (which is considered in another question already).

  Have you tried to reset Firefox? Refresh Firefox – reset the parameters and modules

• PS CS 6 crashes when you use the type tool, Mac-Yosemite

  Hi, I have a problem with my PS CS6. Whenever I try to put the text layer in the PS document crashes. Anyone has the same problem? What is the solution?

  Hi again,

  • While you hold down the Shift key open PS and click Yes at the prompt.
  • Now use PS and see if the problem persists.
  • If it does not try to reinstall the Psalm
    • Here's the link - applications download Creative Suite 6

  Concerning

  Rohit

• Break down and an object of a list/table of the index reference

  TestStand using I'm trying to figure out how to break down and an object reference to a table/list of the index. My sequence is attached. I received a few tips of the 3rd developer with VB code, what should be done. I'm having a problem translating in TestStand. VB code follows the description.

  I use .NET to run a 3rd party software using a sequence of imagery system and run 3rd party software tests. In TestStand, my "GetCurrentTests" approach, when an object for a specific sequence reference, returns a reference of type object ' object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand]); expected return a list of tests in the sequence of part 3.

  Next steps "GetCurrentPattern" needs to index through this list in order to get and then define and display the display model of the specific test to start the specific test. This next step class is RadiantImaging.TSEngine.ICommand (interface) and returns an object reference (radiantImaging.PatternGenerator.Patterns.Patternbase): a reference to the model.

  What I'm confused about is decaying of the 'object reference(system.collections.generic.list'1[Radiant.Imaging.TSEngine.ICommand])' return value in order to provide the? indexed reference object for "Model of GetCurrent" step.

  VB code is provided below for me that shows how it can be done in VB. I'm not familiar enough with TestStand, .NET and VB to break down this >

  Any suggestions or advice is greatly appreciated.

  VB code:

  Public Class Form1

  Private PatternGenerator.IPatternGenerator MPG

  Private WithEvents mTestSequence as TSEngine.TestSequence Private Sub InitializeButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles InitializeButton.Click

  TSEngine.Settings.MeasurementSource = TSEngine.MeasurementSources.Camera

  TSEngine.Settings.SaveMeasurementsToDatabase = False

  TSEngine.Settings.SaveResultsToDatabase = True

  TSEngine.Settings.SerialNumberAllowDuplicates = True

  mPG = TSEngine.CurrentPatternGenerator

  TSEngine.Initialize ("C:\PM 4616197.rdb Calibration")

  TSEngine.Databasename = "C:\default Alpha_PEK_Date.pts".

  TSEngine.InitializeCamera)

  End Sub

  Private Sub RunButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles RunButton.Click

  mTestSequence = New TSEngine.TestSequence (1)

  Dim result as TSEngine.Tests.ResultEnum

  For i As Integer = 0 To mTestSequence.NumberTests

  Dim p As PatternGenerator.Patterns.PatternBase

  p = mTestSequence.CommandList (i). Model

  p.PatternGenerator = mi/gal

  mPG.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  ' p.PatternGenerator.MonitorType = PatternGenerator.Monitor.PrimaryPartial

  p.PatternGenerator = mi/gal

  p.Show)

  result = mTestSequence.RunSingleTest (i)

  Dim results As List (Of TSEngine.IResult) = mTestSequence.CommandList (i). Result

  Results (i). Name

  mTestSequence.CommandList (i). ResultMeasurement.

  Next

  End Sub

  Technical support solution: "I spoke with R & D and they informed me that the type of data in question is a generic class that is not supported with the .NET adapter. You can change the data type of a code module to another using a data type of object reference, but you can not manipulate the generic classes within TestStand.

  "" "" You can find this information in aid of TestStand under NI TestStand environment reference help"TestStand adapters" adapters for .NET ' adapter .NET '.NET called settings ' settings not supported. Here, the solution would be to ask a code module that performs this task for you. »

  Change the settings for call .NET

  Parameters not supported

  The TestStand .NET adapter cannot call methods and properties that have arrays as parameters in staircase or return types and does not support structures that have shredded the members of the group.

  In addition, the .NET adapter does not support creating or call methods on generic classes.

  My solution was to implement the foregoing in VB.NET from TestStand .NET adapter does not support .NET generic data types.

• If my computer breaks down how am I supposed to get my files that are saved back.

  If my computer breaks down how am I supposed to get my files that are saved back.

  Barjakes

  What operating system are you currently using?
  If you use Windows 7 try from here.
  http://Windows.Microsoft.com/en-us/Windows7/restore-files-from-a-backup

• Explorer.exe (I think) breaks down regularly

  Hello

  First, I will begin by saying that I am not entirely sure of the weather or not this is the right category. So, I want to apologize if it is not.

  My problem is that explorer.exe (or at least I think it's explorer.exe) breaks down regularly. It happens when I am opening the files, making things with files (such as copy, rename, Zipper,...), or simply at random intervals. Then the image of the desktop background and the icons on the desktop disappear, leaving me with a purple background. The same happens for all the icons and the clock in the taskbar.

  Usually, it recovers after a few seconds, open records in the process of closing. When it isn't, it can be retrieved manually by running explorer.exe in Task Manager (this is why I suspect task manager).

  Sometimes it seems to get into a loop of crash, constantly crashing, recovering a few seconds later and then crashing again. This can be stopped by killink 'Windows verkenner' task, or translated: 'Windows Explorer' in the Task Manager. From, it still often causes only to crash again then, so then I have to use the cmd to do what I would normally be in the Solution Explorer, or restart my computer hoping that it will work next time.

  While this problem is not very harmful to my computer (or so I think), it's getting very annoying, especially since it ig going more frequently over time.

  I have already disabled the windows updates, because the problem always seems to worsen after updates.

  He has especially much worse after upgrade my computer to windows 8.1 (which was already earlier). He never continued to work for a minute then, and I did a system recovery to restore windows 8.0.

  I had this problem basically since I've had this laptop (which was in September), but I have not found a solution for this. I've done various analyses of viruses and malware, and I'm sure that it is not caused by a virus.

  If anyone knows a fix work for this, so I'd be very happy.

  Thanks in advance.

  ~ Ben

  If Windows 8 comes with the laptop, then you must take the issue by the manufacturer of the laptop.

  There may be a policy for downgrading to Windows 7.

  What you are experiencing with Windows 8 is not typical and I would recommend to take up the issue with the manufacturer of the laptop because it's their responsibility, under warranty, to make sure everything is working properly, including the software.

• What happens if my external drive "working files" breaks down?

  I use two external drives to save and back up my files.  The files organized, edited the reader of 'work'.  If the drive working breaks down, how can I restore it from the player of "backup" that contains just the original, unmodified, the files placed in folders by date of importation?  I realize that catalogue contains all the changes, but how to return to the Organization?  Anyone using a Raid 1 configuration for two disks mirrored?

  Maybe I don't make myself clear. How to take the 'back-up' disc, containing original photos not published, ordered by date of import and convert the disc format 'work' catalogue in the LR4 will recognize?

  It's great that you think about it now, instead of this disaster.  Play well!

  The "second copy" option in the dialog box import is ideal for temporary backup, while the pictures in your main backup system, but it is a nightmare to restore from.  There are options to rearrange disaster, but it is better to avoid.

  Rather than RAID1, I would suggest looking at backup synchronization software or a file - I love Vice Versa on Windows or Chronosync on Mac - to keep a copy in the mirror of the work unit.  If you use RAID1 and photo gets deleted or damaged, it is immediately deleted/damaged on the second disk RAID, while the file backup/synchronization software would go less often, giving you a chance to recover it.  Many also offer one option 'archive' for deleted photos, moving them to another folder.

• Can I use speech on an iPad to read the text aloud?

  I use the reading list in Safari on my iPad to read my news. I use a treadmill for exercise. I would use speech on an iPad to read my News aloud while using my treadmill. Is this possible?

  Try the settings > general > accessibility > speech > talking about screen. However, I believe that you would allow this, when you go to each new screen.

  I think that there are applications that offer this feature, but I have never used one and don't know what to recommend.

  http://AppAdvice.com/AppGuides/show/text-to-speech-apps-for-iPad

• 27 "2013 mac only shut down using the power button / stop, is this a problem or a part of the new system

  After my upgrade that Mac is not closed by using the drop-down menu option, it also seems to crash the finder.  Finder raises with force quit.  I can only shut it down using the power button.  Is this a bug/problem of a part of the El Capitan?

  Wacom tablet software is known to cause this problem. Options:

  Uninstalling the Wacom software

  Completely and remove items from connection

  The Wacom driver update

• Firefox hangs and I don't know where to find "subject: breaks down.

  In recent weeks, Firefox started to plant several times and quit unexpectedly - especially when I click to open it. I often get the annoying message "well, this is embarrassing." More useless. I sent the report of the accident and expect to hear from you as to why I have problems, but nothing happens. I can't find how to locate the ' topic: breaks down ' in the address bar. Can you explain this.

  On a Mac, it's Cmd + L to go to the address bar.

  If you have submitted incident Breakpad reports then it would help if you post the ID of one or more reports of incidents Breakpad.
  You can find the ID of the submitted crash reports on the Subject: hangs page.
  You can open the Subject: hangs page through the address bar just like you open a Web site (topic: is a protocol for accessing the internal pages).
  A GUID crash looks like: bp-xxxxxxxx-xxx-xxxx-xxxxxxxxxxxx

  You can copy and paste the links or the crash IDs of some of the most recent accidents, and post them on this forum.

• HP Envy 4500: Double-sided printing, 2nd page is upside down, using a mac

  Hello

  I can't figure out how to make the second page, not upside down.

  Any idea?

  The only option is a check mark for two-sided box, after you click printer.

  Help!

  Hey @Kerry007

  Thanks for the detail and the screenshot, it is very useful.

  I see that you use AirPrint driver, not that of the HP and which may cause the problem.

  System Preferences > printers and Scanners to select your printer and click on the button "-" to remove it.

  Then click on the sign more and select the printer listed.

  Click the menu drop-down use, instead, the default AirPrint option select the printer model from the list and add it.

  Now follow my steps, and you should be able to find this option and change the type of link.

  Kind regards

  Shlomi

• How can I make sure that my music on my Ipod Classic is not lost forever, if it breaks down?

  How can I make sure that my library of music on my Ipod Classic is not lost forever, if it breaks down?

  Back it up.

  Your music library should never exist only on your iPod.  It must be present on a computer in iTunes, and to be sure it must be saved on an external drive also.

  If your library no longer exists on your computer for whatever, reason, you need to extract the iPod.

  turingtest2 offers you several ways to do this in his user tip found here:

  Recover your iTunes from your iPod or an iOS device

• The use of generate for demodulation and modulation PSK sync settings

  Hi I'm trying to generate Parameters.vi of sync allows you to synchronize the flows recovered after demodulation and my input to the block of modualtion streams but I do not know how to work with this block to synchronize the input with the output stream stream. Also would you please let me know what are the modes of synchronization of the input bits and demodulation bit stream. I really appreciate your help

  Thank you

  Hi en99,

  To use 'Synchronization generate MT Parameters.vi' you must wire in what follows on your block diagram:

  • The parameters of the system created in 'System generate MT Parameters.vi' needs must be connected directly to the vi synchronization.
  
  
  • Sync settings must be wired directly to 'MT Demodulate.vi'
  
  
  • The bits of synchronization can be connected to synchronization vi directly at "MT generate Bits.vi.

  What I did is took your 11. VI you downloaded in your post previous and amended to contain synchronization vi. I recorded as a 2010 version.

  I hope this information helps!

  Kind regards

• After clean reinstall XP 2, IE6 continues to break down, Windows Update does not work, so I am unable to download 3 XP and IE8!

  Need help to diagnose why, after a clean reinstall of original CD XP2, IE6 continues to break down, and Windows Update is not working correctly,

  which means that I am unable to download XP 3 service pack or IE8.

  Download sp3 from HERE. Save the file to your desktop. Double-click the file to install sp3 manually.

  Edit: Link fixed.