Captivate 9 buttons Quiz: I can't get flipping and animations to work down.

Similar Questions

• How can I get voice and data to work with the ASA 5505?

  Here's the issue I'm having.   Can I get a Cisco 7940 to work behind one site to another configured ASA 5505 and I can also get data to work behind it.  However, when I try to create a separate Vlan for voice and data, it does not work.  Our voice VLANs on our remote sites are 172.30 and data are 172.31, when I put the inside interface with 172.31 data will work and when I on it 172.30 voice will work.  I upgraded to a security more license and tried vlan3 created as voice.  I have the data to the top and work but I can't get vlan3 to work.   Any help would be greatly appreciated.  Thank you

  Here is my current config:

  hostname TESTvpn
  activate the password xxxxx

  passwd xxxxx

  username admin password xxxxx privilege 15

  name Corp_LAN 10.0.0.0
  name 192.168.64.0 Corp_Voice
  name 172.31.155.0 TESTvpn

  object-group network SunVoyager
  host of the object-Network 64.70.8.160
  host of the object-Network 64.70.8.242

  the Corp_Networks object-group network
  network-object Corp_LAN 255.0.0.0
  object-network Corp_Voice 255.255.255.0

  interface vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  No tap

  interface vlan1
  nameif inside
  security-level 100
  IP 172.31.155.1 255.255.255.0
  No tap

  interface vlan3
  nameif Corp_Voice
  security-level 100
  IP 172.30.155.1 255.255.255.0
  No tap

  output
  interface Ethernet0/0
  switchport access vlan 2
  No tap

  interface Ethernet0/7
  switchport access vlan 3
  No tap

  output

  dhcpd allow inside
  dhcpd address 172.31.155.10 - 172.31.155.30 inside
  dhcpd dns 10.10.10.7 10.10.10.44 interface inside
  dhcpd sun.ins area inside interface
  dhcpd allow inside

  enable Corp_Voice dhcpd
  dhcpd address 172.30.155.10 - 172.30.155.30 Corp_Voice
  dhcpd dns 10.10.10.7 10.10.10.44 interface Corp_Voice
  dhcpd interface of sun.ins of the Corp_Voice domain
  enable Corp_Voice dhcpd
  dhcpd option 150 ip 192.168.64.4 192.168.64.3

  Enable logging
  exploitation forest buffer-size 10000
  monitor debug logging
  logging buffered information
  asdm of logging of information

  outside_access_in list extended access allow all unreachable icmp
  outside_access_in list extended access permit icmp any any echo response
  outside_access_in list extended access permit icmp any one time exceed
  access extensive list ip 172.31.155.0 inside_access_in allow 255.255.255.0 any
  inside_access_in list extended access allow icmp 172.31.155.0 255.255.255.0 any
  Access extensive list ip 172.30.155.0 Corp_Voice_access_in allow 255.255.255.0 any
  Corp_Voice_access_in list extended access allow icmp 172.30.155.0 255.255.255.0 any

  VPN access list extended deny ip 172.31.155.0 255.255.255.0 object-group SunVoyager
  extended VPN ip 172.31.155.0 access list allow 255.255.255.0 any

  inside_access_in access to the interface inside group
  Access-group outside_access_in in interface outside
  Access-group Corp_Voice_access_in in the Corp_Voice interface

  Global 1 interface (outside)
  NAT (inside) 0-list of access VPN
  NAT (inside) 1 172.31.155.0 255.255.255.0

  Enable http server
  http 172.31.155.0 255.255.255.0 inside
  http 172.30.155.0 255.255.255.0 Corp_Voice
  http 192.168.64.0 255.255.255.0 Corp_Voice
  http 10.0.0.0 255.0.0.0 inside
  http 65.170.136.64 255.255.255.224 outside
  SSH 10.0.0.0 255.0.0.0 inside
  SSH 172.31.155.0 255.255.255.0 inside
  SSH 65.170.136.64 255.255.255.224 outside
  SSH timeout 20

  management-access inside

  dhcpd outside auto_config

  Crypto ipsec transform-set esp-3des esp-md5-hmac VPN
  crypto map outside_map 1 is the VPN address
  peer set card crypto outside_map 1 66.170.136.65
  card crypto outside_map 1 the value transform-set VPN
  outside_map interface card crypto outside
  crypto isakmp identity address
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  md5 hash
  Group 2
  lifetime 28800

  tunnel-group 66.170.136.65 type ipsec-l2l
  IPSec-attributes tunnel-group 66.170.136.65
  pre-shared-key xxxxx

  output
  int eth 0/1
  close
  No tap
  int eth 0/2
  close
  No tap
  int eth 0/3
  close
  No tap
  int eth 0/4
  close
  No tap
  int eth 0/5
  close
  No tap
  int eth 0/6
  close
  No tap
  int eth 0/7
  close
  No tap

  Peter,

  Note that access list names are case-sensitive, so you've actually done something different from what I proposed.

  Please do:

  no nat (Corp_Voice) 0-list of access vpn

  No list of vpn access extended permitted ip TESTvpn 255.255.255.0 everything
  IP 172.30.155.0 255.255.255.0 extended vpn access do not allow any list all

  extended VPN ip 172.30.155.0 access list allow 255.255.255.0 any

  NAT (Corp_Voice) 0-list of access VPN

  In the case where you did deliberately, for example to separate the 2 acl: note that acl VPN (upper case) is also used in the encryption card, where you cannot add a second LCD.

  So if you want to separate you, you will need 3 access lists:

  list of access data-vpn ip TESTvpn 255.255.255.0 allow one

  voice-vpn ip 172.30.155.0 access list allow 255.255.255.0 any

  access-list all - vpn ip TESTvpn 255.255.255.0 allow one

  access-list all - vpn ip 172.30.155.0 allow 255.255.255.0 any

  NAT (inside) 0-list of access vpn data

  NAT (Corp_Voice) - access list 0 voice-vpn

  outside_map 1 match address all vpn crypto card

  Don't know if this was also clearly to my previous message, I recommend you to replace the "all" (in each of the ACL lines) to something more specific (i.e. a remote network, or group of objects that contain the remote networks).

  HTH

  Herbert

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Compaq nc6400 upgraded xp to win 7 can not get the fingerprint reader to work

  I have upgraded xp to win 7, as we will have to do, but can't get the fingerprint reader to work. It appears in the devices that there is one on the machine. I downloaded the drivers for Vista, but they got nowhere.  Read in many places as Vista drivers will work but I seem to need more than that. Any clue?  Thank you!!!

  Hello:

  Yes, for Vista fingerprint reader driver is the only one available, but you must install the software HP protect Manager security tools for Windows 7 from the model which succeeded the nc6400, who was the 6910p.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_77198_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You must also use the W7 driver quick launch buttons.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_78740_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  If your computer laptop bluetooth, you need the W7 bluetooth software and driver...

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76382_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  And you can use the version of W7 HP wireless assistant software.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3357378&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_76368_1%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  You can also read the manual tools security protect manager, so you can understand how to use the fingerprint reader.

  http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.process/?spf_p.tpst=kbDocDisplay_ws_BI&spf_p.rid_kbDocDisplay=docDisplayResURL&javax.portlet.begCacheTok=com.vignette.cachetoken&spf_p.rst_kbDocDisplay=wsrp-resourceState%3DdocId%253Demr_na-c00881344-7%257CdocLocale%253Den_US&javax.portlet.endCacheTok=com.vignette.cachetoken

• I can't get EMET 2.1 to work on XP Home machines

  I can't get EMET 2.1 to work on 2 computers XP Home.

  I understand that I will not be able to configure the system wide DEP on XP Home versions, but I should be able to participate of the individual claims of DEP using the button "Configure Apps".  Problem is that does not either, on two different machines... I added the browser, pdf, customer e-mail reader and Media Player, but when I restarted these applications, they did not appear in the lower pane as running EMET.

  It is my understanding applications, when adding, supposed to be indicated as a checkmark green or any other symbol next to them?

  I see neither EMET in Process Explorer.  :(

  Of course, I could use some assistance.

  Hello

  I suggest you to report this problem in the TechNet community.
  http://social.technet.Microsoft.com/forums/en/Emet/threads

• How can I get my TWAIN scanner to work at Yosemite

  How can I get my twain scanner to work at Yosemite?

  Please read the basics of the Mac: using a scanner - Apple Support.

• How can I get a dynamic mic to work on the iMac?

  How can I get a dynamic microphone to work via the usb input? Do I need a plug-in?

  Well Yes, if it is a USB microphone, the support is to plug.  Note, Apple provides an Audio configuration and Apple Midi utility in Applications-> utilities that once connected develops on the parameters in the menu-> Preferences-> sound-> entry

  Some microphones require Mac OS X drivers.  It would therefore be important to determine if yours is a.   Google your brand and model micro with Mac OS X and the drivers of Word to see if someone needs.

• How can I get my iPhone/iPad to work with Windows 10.

  How can I get my phone [/ iPad to work with Windows 10]

  Work what?

  Have you downloaded the latest version of iTunes on your computer?

  What exactly do you expect to achieve?

• How can I get (record) web pages to work when im offline

  How can I get (record) web pages to work when im offline. I can't find any setting for this.can help you

  Try the Read It Later addon.
  https://addons.Mozilla.org/en-us/Firefox/addon/7661/

• I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1

  I still can't get a panoramic photo to work on iOS iPhone 5s 9.2.1.  Any solution (s)?

  How would you like that give us for you solutions when you provide the details, like what happens when you try?

• I can't get the Media Creator to work

  I can't get the Media Creator to work.
  I installed it and it does not open.
  Suggestions anyone?

  Hello

  What cell phone do you have exactly?
  What is creator of media?
  What do you do exactly?

  Maybe you should try to reinstall the software again.

• Key board does not work correctly when you type. Can not get the system restore to work properly, either

  Tried to run the system restore, but it will not restore.

  Hey AnnEdelstein,

  Because you can't get the system restore to work, perform a clean boot on your Windows XP system. The guide to that is here. Which follow, and then try again to Outlook. If it works to the minimum, then boot in the boot, analyse the whole system with your Antivirus and other security you have.
  Also make sure you have the drivers for the keyboard. Search for the manufacturing of the keyboard, and they should have the drivers on their support site. I hope this has been helpful!

• How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  How can I get rid of the icon "shut down windows"? It appears from the beginning to the top!

  Hello jsitch, This thread has been created in the forum Desktop and personalization; the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

• I bought a laptop and did not receive a CD or DVD with the product key. How can I get one and install?

  I bought a laptop from HP 2000 but did not receive a CD/DVD with product key.  How can I get one and install?

  Where did you buy it? Had it already installed Windows? It was used? New?

• I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  I uninstalled the touchsmart from hp on vista and then tried the system restore, dad will kill me, how can I get the touch screen to work again?

  Hello

  You have a specific question for HP, it may be better if you ask in the Forums of HP's Support.

  http://h30434.www3.HP.com/

  See you soon.