Capture for my clients

Similar Questions

• New NLE build Specs I chose for my Client - comments?

  OK, after much work, I came with what appears to be the best bang for the buck for my client to video conversion that needs new systems.

  Here's what I chose:

  Antec DF - 85 Black ATX full Tower computer case (tons of USB 3.0 ports, CPU cooler cutting, 9 internal 3.5 "disks, 7 fans, space, video cards made)-$156

  CORSAIR HX Series CMPSU-1000HX 1000W Power Supply (a chance I need more 1000W?) - $230

  ASUS P6X58D Premium LGA 1366 Intel X 58 SATA 6 Gb/s USB 3.0 ATX card mother Intel (Note: only available Council supported by BlackMagic for their DeckLink/IntensityPro video capture cards, so it's pretty much everything unless I want some advice not supported with equivalent record of lucky) $-290

  Intel Core i7 - 950 Bloomfield 3.06 GHz 4 x 256 KB Cache L2 8 MB L3 Cache LGA 1366 130W Quad-Core Processor BX80601950 (I intend to overclock up to a point, probably less than 4 GHz)-$270

  Prolimatech Armageddon CPU cooler - Intel Socket LGA 775/1156/1366 cooler, 140mm Fan Compatible (chose this one because a review of the site Web of the ASUS Board specifically used this cooler that well integrate without obscuring the 6 RAM slots; also it gets good reviews in the world)-$65

  SILENT extreme XIGMATEK series XSF - F1452 140mm Case Fan x 2 (for the cooler above to improve the cooling) - $20

  G.SKILL Ripjaws Series 24 (6 x 4 GB) 240 - Pin DDR3 SDRAM DDR3 1333 (PC3 10666) desktop memory model F3-10666CL9T2-24GBRL - $285

  NE5X56T01142-1041F Palit GeForce GTX 560 Ti (Fermi) 2GB 256 - bit GDDR5 PCI Express 2.0 x 16 HDCP Ready SLI Support video card (a lot of RAM memory DDR5, 384 cores, memory 256-bit, examined way) - $280

  SAMSUNG Spinpoint F4 HD322GJ/U 320 GB 7200 RPM 16 MB Cache SATA 3.0 Gb / s 3.5 "Internal Hard Drive - bare drive (for the OS and programs) - $43

  SAMSUNG Spinpoint F3 HD103SJ 1 TB 7200 RPM / MIN 32 MB Cache SATA 3.0 Gb/s 3.5 "internal hard drive - bare drive x 4 (RAID 0) - $260

  SONY black 12 X BD - R 2 X BD - RE 8 X DVD + R 5 X DVD-RAM 8 X BD - ROM 8 MB Cache SATA internal Blu - ray burner Blu - ray burner BD-5300 s - 0b - OEM - $110

  Link Depot 39.37 "cable SATA II with locking lock model LD - SATA - 1 X $5 4 discs + DVD writer - $24

  Total cost: $2033,00

  With Windows 7 Professional OEM and a first Adobe Pro CS5 upgrade, which adds another $434 for a total of $2 467. I think that the client can handle this. He will also probably receive a Matrox MX02 Mini or BlackMagic DeckLink/IntensityPro card to manage the video capture. I'm leaving this decision up to his tech. He needs to go to a full Production CS5 Suite, then whether to tack on another $500-600 on the Premiere Pro upgrade price that will bring him up to $3,000 for the entire system.

  He needs to replace three machines in the video Department, but my guess is we'll start with one, maybe two, and improving the productivity on the nonsense he uses now may mean that he didn't need a third. Whereas it is the upgrade of six-year-old + Pentium 4 machines with 2 GB of RAM, no RAID, Adobe Premiere 1.5, these new systems are expected to come as a shock. I hope that the price of the upgrade will be as big a shock.

  I look forward to comments on the system set out above, positive or negative.

  I know I could improve this slightly Say, 10 000 rpm Velociraptors to the reader of the BONES and stuff like that, but I tried to keep this pretty vanilla down the cost.

  I would like to know what you think.

  The industry knows what it does with the Ram. The real problem has to do with the ram manufacturer trying to keep their prices down when they go to bid for IC. This often requires of the IC which is not nearly as good or compatible that say Samsung modules. They then have to cope with the synchronization profiles that are far out of spec JDEC for the amateur market, since that market is fueling the global market of manufacturing system. The QVL is the best way to overcome these factors you may know. However, keep in mind that often motherboard manufacturers test wands in configurations of 3, 6 or even sometimes. They often test with just 1 stick so the reliability of the QVL is always questionable. Needless to say that if you want to 1600 and you most likely want the reliability without having to in depth, and then search for Samsung modules at 1600 CL 8 for 2GB or 4 GB CL9. These probably will work on almost any plate provided the manufacturer tattoo'ed profiles correctly on the sticks.

  Eric

  ADK

• How to disable the sound of recording at intervals Photo capture for the Sony HDR-AS100V POP Action Cam

  Hello

  Im trying to find out if there is a way to turn off this annoying noise of capture for each photo of the action cam Sony made in mode photo interval. It uses the power of the battery to make the shot so that draws attention / distracted when it is implemented in a public space.

  Please let me know what could be done.

  Installation, configuration, beep, stop program

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• HP scanner and Capture for Windows 8

  I have a HP6600.  HP scanning and application of the Capture for Windows 8.1 stop when I switch to another application - if I start a scan and then move to another application leaving work in the background, the analysis always fail (message says that the application has been suspended).  The scan is successful when I keep the app on the screen, preventing me from multitasking.  If I move to a different application, scanning and Capture stops working in the background.  This can be corrected?

  Hello.

  It's true, because it cannot communicate with its address space on your computer. You expect the task of analysis at the end. They can do so on the high end printers/scanners multitasking, but NOT for low range printers/scanners.

  Hope it makes sense.

• Recommendations material and tips for network client 100

  Hello

  We are currently looking at creating a wireless network separated very basic for a client in two adjacent large cabins (3 m of distance) that can support up to 100 clients max simultaneously. It will only be for entrepreneurs to access basic internet, web mail, etc. connections. There is no existing infrastructure to connect to, so let's look at an internet connection for a form, a small switch and the wireless network. Range isn't a problem because they are next to each other it's support for such an amount of connections. I thought that a cluster of 2-4 WAP321 configuration might be a little tense and we could get questions like the number of simultaneous connections gets nearly 100. I also watched a couple of standalone Aironet 1600 s, one in each cabin.

  The network itself is very basic, because it is literally just shared internet access but I need to make sure it is reliable with 100 connected clients.

  I rang pre-sales tech, but they were not mcuh help and sounded like they knew less than I, so any help would be appreciated.

  Concerning

  Harry

  Dear Harry,

  Thank you to the small community of Support Business.

  By checking on the WAP321 data sheet, I see:

  -Recommended user support-up to 32 users connective, 20 active users

  -Active clients by cluster = 80

  I agree with you when you say "could be a little tense and we could get questions like the number of simultaneous connections gets nearly 100", that's why I suggest you go for a business, a range like the Aironet1600 input device you mention.  In any case I would contact you the pre-sales team or support thread-mobility advice and a community helps further.

  Thank you for your time on this matter and please let me know if there is something I can help you with in the meantime.

  Kind regards

  Jeffrey Rodriguez S... : | :. : | :.
  Support Engineer Cisco client

  * Please rate the Post so other will know when an answer has been found.

• Limits of pix 506 for VPN client connections

  Hello. My company is looking to move away from using Microsoft's RRAS to workers to remote VPN connections. We have a 506th Pix currently serving 2 site VPN connections and client connections. Nobody knows what the limit for concurrent client vpn connections on a 506e and if having 10 to 20 clients connected at the same time (on a user base of 100 +) would cause problems. Any thoughts would be greatly appreciated.

  There is no license for the number of connections limit, this is more a limitation of resources. Check that the data sheet a 506E can handle 16 MB of 3DES VPN. It's marketing plug so the actual throughput will be lower.

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps5708/ps5709/ps2030/ps4336/product_data_sheet09186a0080091b13.html

  Hope that helps.

• scalable design vcs-e for the clients of MPLS and internet

  Hi all

  I think of an evolutionary design of VCS-highway in a service provider architecture.

  Some clients reach vcs-e across one MPLS network, another customer over the internet (each client with its own vcs - c).

  I have a vcs-e with dual NICs and nat enabled.

  VCS - e is a private network.

  In this architecture, if I nat vcs-e in one public ip address, I can't inject the public IP address in the VPN client (clients use the address private, and anyway, they will not receive a public IP, MPLS and the internet). And I can't inject a private Internet ip address. In addition, every customer wants to use an ip address of vcs - e compatible with their plan ip... then maybe customer wants to use an address of 172.31.x.y and a B client an IP address of 192.168.x.y.

  Best solution would be to nat vcs-e address in different ip address for each client / internet through the firewall, for example vcs-e 10.1.1.1 in 172.31.24.1 for the customer has, in 192.168.24.1 for client B and 80.x.y.z for the internet, according to the firewall context... but I'm not sure that I can do (I can? I think I can only the ip address of nat vcs-e statically 1 to 1).

  I am attaching a figure illustrating the design of the network.

  Any suggestion?

  Hello

  In your design, it is allowed to do NAT between VCS - C and VCS-E if you configure using links/box of course, which I think is what you plan to do. A nearby area will fail in this design.

  If your customer can have a VCS - C on their private network and that you connect to your VCS-E through a NAT firewall as you describe as the "best solution".  There is no need to NAT any return to the client IP address, since the VCS - C will make an outbound connection only for the VCS-E.

  Robert

• "Unknown Publisher" and makes it complicated for a client to download.

  I am a software developer with a product that users download from WWW.  Windows 7 identifies the download as "Unknown Publisher" and makes it complicated for a client to download.  How can I register my software so that it does not fall into the class of "Unknown Publisher"?

  Hello

  I suggest you to send your query to the Windows Desktop Development Center
  Windows desktop development forums.

• I made a form for my clients, I did this form with a button "submit" button, the button will save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is complete

  I made a form for my clients, I did this form with a button "submit" button, the button Save the form and send it, I did the URL to go to a different (different to mine) e-mail address but when I distribute the form and it is supplemented by my clients it send to my email address not the URL how to change this.

  No matter how you have configured the Send button when you use the feature distribute the form. There are some e-mail address is in your identity preferences (Edit > preferences > identity) and use it. If you can change the email address it or not to use distribute the form and the button send the value you want.

  One thing that happens when you use the feature to distribute the form is the form is enabled Reader, you can do separately, but you really shouldn't do if the form must be used by others. The dispenser a form must activate using their copy under license of Acrobat Reader.

• Captive capture for Canon EOS 1Dx MkII?

  Are there word on when there may be captive capture for Canon EOS 1Dx MkII?

  I guess it will be in the next full update for example LR6.6 or 2015.6 CRD

  The last update was a minor double dot release 6.5.1 with mainly bug fixes.

• Update for vsphere client and ESXi host, now getting errors

  Did a upgrade for my client vsphere, VMware-viclient-all - 6.0.0 - 3016447.exe file name

  Now I cannot view comments consoles, cannot add new guest OS (option is grayed out), and I get an error when the Client program starts (see first image)

  

  Here is the error when I try to view the console to the guest operating system. Can I use Remote Desktop connection to connect to the guest operating system (R2 for Windows Server 2012)

  

  Here is the version information

  

  Also improved the host system of the ESXi server to update to U1 using the VMware-VMvisor-Installer - 6.0.0.update01 - 3029758.x86_64.iso

  VMWare Tools never seems to complete the installation for the guest operating system.

  What can I do now?

  Client runs on a desktop computer Windows 7 Pro with 24 GB of RAM.

  ESXi is a server Dell Poweredge T110-2 with 32 GB of RAM

  I ran into the same issue and Re: VMware-viclient-all - 6.0.0 - 3016447.exe broke Console hosts 6.0 ESXi and ESXi 5.5 fixed it for me.

  André

• I would just ask the best way to integrate or add the feature of 'belonging' to Adobe Muse site I built for a client? The client wants for their customers to be able to have a log in option to access exclusive offers. Help, please. Thank you

  I would just ask the best way to integrate or to add the feature of "belonging".

  on the Adobe Muse site I built for a client? The client wants for their customers

  to be able to have a newspaper in option to access exclusive offers. Help, please. Thank you.

  Accommodation with Business Catalyst and feature Secure area are probably the easiest. But easier I don't mean easy. There will be a steep learning curve to learn how Business Catalyst works first.

  Unfortunately at this time Muse isn't really the tool to do what you need.

• Must provide F4V file for the client, but I use AE CC 2015 so it is no longer possible.

  I provide an F4V file for a client. Is a file format, not that I like in all before - it must be used with Flash files apparently.

  This file format is not available for export with AE CC 2015 - not from CC or CS6 I think.

  So I downloaded these versions of the Cloud. However they do not open because my OS is too recent. 10.10.5 Yosemite

  I learned that I can use an older version of Media Encoder - version 7 for this export file format, but all I can download Adobe are updated. Which of course will not work.

  So I'm stuck.

  Suggestions?

  Have you tried to rename an aa h.264.mp4 f4v? 99% of the time to meet with the same file.

• Hello, I am creating a mini site for a client via muse, is it possible that it could be updated (adding images) without muse by passer?

  Hello, I am creating a mini site for a client via muse, is it possible that it could be updated (adding images) without muse by passer?

  Hello noutcall19,

  If you intend to replace the existing images in the site then you can certainly do it with the help of InBrowserEditing, but it is not possible to add new images by using InBrowserEditing.

  https://helpx.Adobe.com/Muse/using/in-browser-editing-websites-third-party-hosting.html#up meetings % 20 a % 20website % 20Selon % 20 In-Browser % 20Editing

  Kind regards

  Vivek