Recommendations material and tips for network client 100

Similar Questions

• Tips for network administrators avoid the error "built-in tomcat web server was able to start after 30 seconds" on the building with screens in OPM?

  Multi developers geographically - dispersed control source of TFS, devs mapping local drives to the citizens.

  Some developers in certain regions always get tomcat timeouts during construction with screens in OPM.

  We have no right to admin on disks (they are administered by the Agency) - but I was wondering if it is something that everyone has met before and have a solution and or a tip on how to resolve the issue (if I can help network administrators)?

  Thank you very much...

  If you use Oracle Policy Modeling version10.2 or later, you can change the "boot tomcat timeout" If you're handy with a text editor.  You need the OPM the file "registry.xml" which should be:

  c:\Users\\AppData\Roaming\Oracle Corporation\Oracle policy Modeling\registry.xml

  or

  c:\Documents and settings\\application data\Oracle Corporation\Oracle policy Modeling\registry.xml

  Look inside it to

  and Add (or change) the entry that says:

  by default

  Change the word 'default' for the number of seconds to wait for the embedded server Tomcat starts.  I suggest try to 90 seconds and increase it if necessary.

  Moreover, the best public reference I can find for this function is that the "features and benefits" to release documentation for 10.2 (see page 29):

  • http://www.Oracle.com/technetwork/apps-tech/policy-automation/learnmore/OPA-10-2-features-and-benefits-284702.PDF

  Moreover, when the project is on a local disk, my machine usually takes less than 2 seconds to start tomcat.  Suffice it to say!

• How to stop "Hard drives Autorun is allowed" and "Autorun for network drives is activated" messages

  I am running Windows 7 on my computer and I got a few messages warning of Kaspersky Security software:

  "Hard drives Autorun is allowed" and "network drives Autorun is enabled.

  How turn off the power?

  Thanks for your help in advance.

  MEJaggi

  Hello Jack,

  Thanks for posting your question on the Microsoft community.

  Thank you for your question details.

  This behavior can occur if the hard drive or network drive settings are not configured correctly.

  I suggest you disable the Autorun feature and check if that helps.

  Please see this link:
  How to disable the Autorun feature in Windows
  https://Support2.Microsoft.com/kb/967715

  Note: See sub-section "Let me fix it myself" under the section "How to disable or enable all .

  Features of AutoPlay in Windows 7 and other operating systems"in the article above.

  Important: problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  For reference:
  http://support.Kaspersky.com/avzscripts/TSW.AVZ.58
  http://support.Kaspersky.com/avzscripts/TSW.AVZ.59

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Can anyone recommend billing and software for a small company of charges?

  I'm Manager of billing for small business consultation and the need to charge customers for about 6 quarterly products at different prices, and I need to track payments and follow-up past due accounts.  I also need to charge travel expenses.

  I'm looking for something easy to use, and I know that Quickbooks offers much more than I need.

  I have a MacBook Pro with OS X El Capitan.  I also have an IPad and IPhone.

  Thanks in advance!

  EasyBooks.

• In a software installation and driver for network WiFi C6150 printer

  Re: HPE 170 t w/Windows Professional computer

  I have difficulties to complete the final configuration after installing the software, after which I get a fatal error. This info is passed on you, and I got a message from one of your REPS that I try to install the wifi only. When I try to open the Solution Center, I get a window that says: the device not finished; Go to the technical support I did several times. He also says to plug in the USB cables, but this isn't the way I want to use this printer.

  I have now done several complete installation/uninstallation process, and I closed my Norton program, including using the disk cleaner / delete the temp nothing helps.

  I can get the printer to work, and the center of HP PhotoSmart works great. But the important centre of the Solution continues to be a problem, and I need a fix for this. What are your recommdations? Thank you

  Of free will or by force, I solved this simpleton.

  Here's what I made if according to Hoyle or not:

  I clicked the downloaded all in one HP software. I removed selectively Solutions centre, although it said that it could create problems with other HP software. When the computer is off, I connected the USB cable from the printer to the computer. I started the computer. It seemed that the downloaded software went into an automatic mode when I pressed the button of installation software. So far, I had previously deselected the HP store and the OCR software. Well, it started to install all three against my will: the Solution centre, OCR and the HP store.  I wanted only the Solution Center. Heck!

  And it has worked. Open Solution Center, and the Fax icon appeared. I ran across a few initial tests; and all seemed to do very well. However, he has worked with the USB cable. Now, the real test:

  I turned off the computer. I removed the USB cable. I turned the computer back on. I opened the center of Solution, and it worked.  After spending almost my entire day on this machine. However, a small hitch. Before its opening, I'd get a small window that I had to say yes to so that the center of solutions to open it. This little window is controlled by user account control, and he did not want to allow the following: Hpqdirect.exe, Unknown Publisher, original file, HD on this computer. It was rather annoying, and I had to get rid of.

  Here's what I did:

  I opened the UAC. I pushed the lever down. I restarted the computer. I clicked on the solution Center, and the small window wasn't there. I disabled the Solution Center.  Then I went back to the UAC, I raised the lever where it was originally. I then open the Solution Center. Voila! The small pestilential wndow wasn't there.

  I want to thank those who have responded to me. Even if I fish around and find a way to do this, I appreciated the help because he kept me on task.  Not only that, but I've learned to other procedures that may be useful to future challenges.

• recommendation of the memory for the guest operating system

  Hi guys,.

  I need some advice

  I have a pile of vsphere 5 made of 2 servers on each server that I have on 5 VM

  (1) domain contoller 2008 standard edition + dhcp + dns

  2) exchange 2010

  (3) file server

  (4) primavera

  My question is what is the recommended memory and cpu for these VM configuration? I'm a bit confused

  What happens if I don't set up the limits and booking hotel and leave all default? What is the point of the week in this configuration? If I leave all default each VM does not use memory a cpu as it needs?

  Thank you specify in advance

  To add the tips of memory... Many people allocates memory for the virtual machines that will never be used, and ultimately you consume the memory of your host much faster than necessary. Start low when allocating memory to a virtual computer. Adding memory is simple to make, after you have collected on the functioning of your host performance data. The Performance tab will show you what is happening.

  Mike

• HP 2000 Vision: D1E80UA #ABA: Windows 7 Ultimate 64-bit drivers for network cards

  Upgrade from Windows XP to Windows 7 Ultimate 64 bit on a laptop HP 2000 Vision. Lost Wi - Fi connectivity. No recognized network card. Go: Device Manager: NO network card. No drivers for: Ethernet controller; Network controller; PCI device; SM Bus controller. Downloaded HP all software and drivers for: network drivers. Downloaded: Drivers for Ralink (HP) network on their Web site. The same problem. Need help. Any help would be greatly appreciated.

  Thank you

  Karl.

  You are the very welcome.

  You need these drivers for the remaining devices...

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp56680.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp64801.exe

  Don't forget to install the graphics driver.  That rarely comes as a missing device, but if you see a standard vga adapter that is listed under the category of display device manager cards, this means that you need to install the graphics driver.

  This package provides the AMD graphics driver high definition (HD) and Catalyst Control Center for models of laptop computers that are running an operating system supported. For laptops equipped with switchable graphics modes, this package contains the drivers for the two graphics (GPU). Switchable graphics allow users to switch between a graphical power mode (normally used under the power of the battery) and a mode of graphics performance. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp58617.exe

• Microsoft client for networks works not

  I had trouble to connect to other machines through recent programs.  He began by trying to access a PowerPivot file that told me that I had no access to the data for some pages on our server .xml, but I can open the page directly through my browser and I can even connect to the server itself without problem.  I traced the problem down to my Client for Microsoft networks.  I'm on the same network as all computers in our area, but I am not connected to the domain itself.  I tried connected to the domain, but when I look at my options, the option to connect to the field is grayed out (I am logged on as an administrator account on my local computer).  When I go into the properties of my network, I can't access the properties for the Client for Microsoft networks.  I tried uninstalling the Client for Microsoft networks and put it back, without success.  I tried to uninstall my network drivers and resettlement without a bit of luck.  I have a feeling that the files of Client for Microsoft networks have become corrupt (I think they are the .inf files.  Can I get a confirmation on that? and if it's true, no matter where I can download new ones for Windows 7 replace the 'old'?).

  I'm not too sure if anyone has any ideas... This seems to be a problem with Windows XP and 98 after doing some research.  Any help would be appreciated!  Thank you guys!

  Hi Jay,.

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 networking TechNet Forums

  Let us know if you need help with Windows related issues. We will be happy to help you.

• (KB972145) Recommended (KB2563894) IMPORTANT (KB968930) recommended and updated for (KB968930) everything has failed

  (KB972145) Recommended (KB2563894) IMPORTANT (KB968930) recommended and updated for (KB968930) everything has failed.

  I tried for days now to download these updates, but I did not, even in SafeMode with networking, I can't get Windows update to try to install?

  I tried a few solutions of Microsoft, but I can't like Regedit HKEY_LOCAL_MACHINE thereupon, after export the keys, that I didn't see any (PendingXmlIdentifier) and so on, so I can't go any further, I got arrested and decide to ask for help.

  If you can help me, it would be great!

  Hello

  ·          What is the error code that you receive when the update fails?

  ·          What are the other steps you've tried?

  Method 1: Reset windows update and install the updates.

  You can read the following article to reset the Windows Update components and see if it helps.

  How to reset the Windows Update components?

• scalable design vcs-e for the clients of MPLS and internet

  Hi all

  I think of an evolutionary design of VCS-highway in a service provider architecture.

  Some clients reach vcs-e across one MPLS network, another customer over the internet (each client with its own vcs - c).

  I have a vcs-e with dual NICs and nat enabled.

  VCS - e is a private network.

  In this architecture, if I nat vcs-e in one public ip address, I can't inject the public IP address in the VPN client (clients use the address private, and anyway, they will not receive a public IP, MPLS and the internet). And I can't inject a private Internet ip address. In addition, every customer wants to use an ip address of vcs - e compatible with their plan ip... then maybe customer wants to use an address of 172.31.x.y and a B client an IP address of 192.168.x.y.

  Best solution would be to nat vcs-e address in different ip address for each client / internet through the firewall, for example vcs-e 10.1.1.1 in 172.31.24.1 for the customer has, in 192.168.24.1 for client B and 80.x.y.z for the internet, according to the firewall context... but I'm not sure that I can do (I can? I think I can only the ip address of nat vcs-e statically 1 to 1).

  I am attaching a figure illustrating the design of the network.

  Any suggestion?

  Hello

  In your design, it is allowed to do NAT between VCS - C and VCS-E if you configure using links/box of course, which I think is what you plan to do. A nearby area will fail in this design.

  If your customer can have a VCS - C on their private network and that you connect to your VCS-E through a NAT firewall as you describe as the "best solution".  There is no need to NAT any return to the client IP address, since the VCS - C will make an outbound connection only for the VCS-E.

  Robert

• Of Rowby runs for the checklist of final material - and buy location suggestions

  Very well.

  I don't wait until July. I'm about to order my gear this week. After spending time on this forum for weeks, here's what I think I will get.

  I'm in California (it's a State of the United States), and I will probably order from Amazon, Ebay, NewEgg, etc..

  So please check my listing and any recommendations for the best prices:

  1 Maruyama GTX480 GTX 480 1536 MB Fermi around ($500 on Amazon) and less on Ebay.   All other locations to make purchases online?

  2 Intel i7-980 X $999 on amazon (other sources?)

  3. motherboard?   Still not sure which version to get.  ASUS.  You want to be able to have a lot of raids if possible and place for future growth.

  4. at least 3 hard drives to begin with, but will add more as I need them. The QUICK EXPORT is very important to me.

  5 memory at least 12 concerts.   If I buy 12 concerts I can now add 12 concerts later - or all 24 should be completely mapped.  What brands do you recommend.

  6 raid Controller - I'm totally ignorant on the subject.  Do I need to do what made beast of prejudice?  Since I want to fast export I feel that I need one.  Any recommendations?  And where to find the right price?

  7. power supply

  8. that this Corsair water cooling system seems good - if she can handle the heat.  And I want less noise, so I hope it helps.

  10 case.  Case of full-size with the noise as much as possible.

  Thank you!  Can't wait to dump CS4 and switch to CS5 and the Mercury playback engine.

  Rowby

  1 GTX480 GTX 480 1536 MB Fermi (Excuse my ignorance, but I assume that there is only one version of this card, right?    Example: http://www.newegg.com/Product/Product.aspx?Item=N82E16814127502)

  A version from different manufacturers, but for the most part, they are all the same.

  3 ASUS P6X58D Premium LGA 1366 (prejudice mentions in one of his messages that the mb should be 'expandable up to 4GIG memory cache oinboard' I guess this Board is extensible at this level)

  The remark about expandable to 4 GB cache belongs to the Areca ARC-1680iX-12/16/24 raid controllers. Those mentioned in point 9 is only 512 MB and not exchangeable. This is the limitation of version 8 ports.

  6. power supply?   I have no idea. Please help here.

  CoolerMaster has a good reputation, is modular and gives beautiful amps on the different tracks. Look here: eXtreme Power Supply Calculator Pro v2.5

  and opt for the Pro version. Set your CPU load to 100% and the ageing of capacitors to 30%, calculate the suggested power and add 10 to 15% for safety.

  7 memory 24 GB OCZ Gold 12 GB (6 x 2 GB) 240 - Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Low Voltage Desktop Memory model OCZ3G1600LV12GS Note: damage said in one of his messages «get DDR3-1333, not DDR3-1066 memory»

  I always learned that 6 x 2 = 12, not 24. This memory is 1600, which is even better for overclocking. This is a very dated post, btw.

  9. ARECA ARC-1680IX-8 PCI - E X 8 SATA / CARD CONTROLLER SAS http://www.amazon.com/ARC-1680IX-8-STORAGE-CONTROLLER-SERIAL-ATTACHED/dp/B001K5Y UTV/ref = sr_1_1? ie = UTF8 & s = electronics & qid = 1276588015 & sr = 8-1

  See the note about point 3. I miss the Areca ARC 6120 battery backup Module. With this card, that should start with 4 drives x F3 raid3 and later expands with multiple disks.

  No comments on other elements. It looks like a very nice and fast system.

• How to deploy and tips and tricks for new users of Jdevloper

  We currently use forms, but we intend to try new modules in jdeveloper 10. I have a few questions. We have developed an example of emp/dept screen according to the directives of the demo.
  1. can somebody explain the operation of the source/executable... In the forms move us file fmb of client for unix and compile for fmx in my forms_path where my IAS is running.
  2. how to run applications
  3. all the tips and tricks of starting using jdeveloper.
  
  We can only use Jdev10, IE7 is not approved for us.
  
  Thank you
  Lalitha
  
  Published by: Superamina99 on November 14, 2008 14:40

  You should be able to invoke the administration console Web on the same machine where your EAR/WAR file is and look for the local file.

• Recommendations/tips for a beginner contributor?

  Hey all!

  I started to contribute to communities of support today, but the interface may seem a little tricky to work with sometimes. I was hoping that some useful people would be willing to share tips/advice for someone new in the region!

  Currently, I am just by clicking on the 'Content' link and refreshing for the new questions to answer, although sometimes sorted by "involved" to follow up on the questions answered. Really hoping to find some easier ways to use to check on different communities or focus on specializations.

  Thanks in advance!

  Take a look at this plan of the Site communities and categories.

  TT2

• update failed opinion said: something is trying to trick firefox by accepting a security update. Please, contact your network provider and ask for help. help please

  What is the solution to this issue - is there one that will not make my eyes roll back in my head? What is a true message from Firefox?

  the popup looks like this:

  [firefix logo] Software update

  Update failed

  Something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help

  Whenever you get a message / popup that software / files must be updated.
  
  DO NOT USE ONE OF THE LINKS PROVIDED.
  
  If this can be a legitimate message, could also be a Virus or Malware.
  No matter when you want or need to check updates.
  Go to the website of the real owner of the program in question.
  For example, for Firefox, go to Mozilla.org
  or Firefox in any language.

• I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. »

  I get a Firefox error message that says, "something tries to trick Firefox by accepting a security update. Please contact your network provider and ask for help. "Do you know what is happening here - what could be the problem? (I have the latest version of Firefox already installed. I previously got Firefox error messages indicating "Firefox update failed". However, I already have the latest version of Firefox installed when I got these error messages.)

  I think that we must hope that the problem will be resolved at the present time. If you see the error message again post in this thread. Also, it would be unusual get this message while trying not to update, but if you get if you try to copy and paste the details of console error that they can be useful.

  Use

  • keyboard Ctrl + Shif + J
  • or button-> Web Developer Firefox-> Console errors

  This kind of message is apparently the only normally expected when you try to update to Firefox. It seems strange that you get the message using a 'Œuvres' document, but others have reported this message seemingly random incidents.
  (So normally, you must clear the error console, and then try to update knowing the error messages have been the result of this attempt to update)

  If I had this problem my concern would be that some kind of malware may be involved, but the message can then indicate that all this malicious program is upset.