Card mother H-IG41uATX HP works @ 1066 Mhz with single 2GB 1333 Mhz RAM

Similar Questions

• EliteBook 8440p; DM1-3020us: 2x4gb 1600 MHz DDR3L works in Pavilion DM1 but not Elitebook 8440p? But both are supported than 1066 MHz RAM

  I have two Elitebook 8440p PCs that both run an Intel i5 520 m (although one of them has a discreet Nvidia NVS 3100 m, while the other does not and use the integrated graphics card Intel).

  I also have a Pavilion DM1-3020us with an AMD E-350 APU; It's the only other PC I own which takes SO-DIMM DDR3 modules.

  I just bought this Crucial DDR3L 1600 MHz 2x4gb hoping to use it with the 8440p without the graphics from Nvidia:

  http://www.BestBuy.com/site/crucial-2-Pack-4GB-1-6GHz-PC3-12800-DDR3L-so-DIMM-Unbuffered-non-ECC-lap...

  However, it causes crashes and BSOD as soon as he tried to start under Win7 64 bit on both 8440 p PCs.  Also when trying to boot Linux Mint 18 I empty a kernel panic, and run Memtest86 + just leads to restarting the PC within seconds.  Yet, I can navigate through the BIOS throughout the day and it will continue to work very well...

  But here's where it gets really weird - the RAM works perfectly fine in my laptop DM1 Memtest86 + and Win7 64 bit (I use it as I type this).  What's curious?  Because both the AMD E-350 and the Intel i5 520 m only support up to 1066 MHz RAM!

  The only thing I can think is that there is something wacky where RAM is unable to operate at 1066 MHz at 1.5V or is not able to run at 1.5V to all E-350 1.35v support (and 1.5V RAM so that the i5 520 m only supports 1.5V) which itself would be really strange that Micron (which actually manufactured the RAM) States on their website that their 1.35v and 1.5V RAM have actually the same die (a bit like mobile i7s quad vs quad I5S Office) and that both can operate at 1, 5V, implying therefore that the 1.35v product is simply a higher binning:

  https://www.micron.com/~/Media/documents/products/technical-note/DRAM/tn4114_ddr3_1_35v_1_5v_compat...

  Crucial live chat support, however, closed several hours for the day, so I thought I would at least make this post in the meantime.

  Hello:

  Please see this thread, and the discussion that I posted in this thread... and you'll have your answer.

  6550 b has the same chipset as the 8440p.  I posted the link to the site from NewEgg for the memory, you need to buy if you live in the USA/Canada in the discussion that I've referenced to the other person who had the 8440p.

  http://h30434.www3.HP.com/T5/notebook-hardware-and-upgrade-questions/RAM-memory-modules-that-actually-work-for-HP-EliteBook-8440p/m-p/5570634#M335108

  There are several discussions on this issue if you want to find even more.  Everything is solved by specific G.Skill memory I posted.

  The extent of why it works in the dm1 and not the 8440p, the chipsets are different.  The Intel chipset in the 8440p doesn't support voltage DDR3L.  Comparison of AMD and Intel chipsets are like comparing apples and oranges.

  I also believe that the chipset amd in the dm1 is more recent than the chipset in the 8440p and promotes low-voltage memory.

  I have just return from memory and use the gift card on something else.

  I doubt that Best Buy has this specific memory.

• 1066 MHz RAM for MacBook Pro 2012

  Hey guys!

  Just registered here, I hope you can help me.

  I have a MacBook Pro (mid-2012) that shows the problems that resemble RAM errors. The 2012 version uses DDR3 1600 MHz modules.

  I can get my hands on a model of 2009 with the DDR3 1066. I intend to move blocks of RAM to see if that fixes the problem with the computer of 2012.

  So my question is:

  The MacBook 2012 will work with 1066 MHz RAM installed? (Provided that the RAM was the culprit, of course). If so, will there be problems other than lower performance?

  Thank you!

  Terji

  MacBook Pro are very sensitive to the Ram being the correct specifications for the computer. Your computer is designed to use only the same characteristics for RAM Why would you think clock speed of 1 066 MHz RAM work in a 1600 MHz system?

• HP Pavilion DV7 - 4083CL 1333 MHz or 1066 MHz RAM?

  Hello

  I have a HP Pavilion DV7 - 4083CL with 2 x 2 GB RAM DDR3. I think they are at 1066 MHz.

  I want to upgrade the RAM 2 x 4 GB.

  Should I care about in 1333 MHz or 1066 MHz RAM?

  If she is 1333 MHz it is really faster, or it will work just to 1 066 MHz?

  Or even running at 1333 MHz, it won't make a difference?

  What is the difference between 'No' and 'not'?

  Will be Kingston KTL-TP1066/4 ("designed for Lenovo systems," says the seller) be on the HP DV7 - 4083CL?

  (this is the only one available right now...)

  Thank you!

  You can use the 1333 MHz and it will work, but the system can still operate at 1066 Mhz and will probably be.

  Here is a small article on buffering and buffer RAM.

  http://www.ehow.com/facts_6893990_difference-buffered-non_buffered-computer-RAM_.html

  Memory RAM Lenovo should work just fine in your HP machine if it's for a laptop, desktop RAM will not work in a laptop. You won't do harm to nothing by trying, it will either work or it won't.

• What card mother motherboard inside the Pavilion hpe h8xt with Ivy bridge

  You want to buy, but can't find any information on what motherboard that uses. Would love to see a pattern!

  @ Big_Dave

  Here is the card I found for the card mother HP OEM Pegatron IPMMB - FM (Formosa). The specifications indicate the decision-making is an Intel LGA 1155 (Socket-H2) and processors supported are;

  Intel Core i3-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i3-3xxx (Ivy Bridge) Dual Core	456
  Intel Core i5-3xxxT (Ivy Bridge) Dual Core	256
  Intel Core i5-3xxxT (Ivy Bridge) Quad Core	152
  Intel Core i5-3xxxS (Ivy Bridge) Quad Core	756
  Intel Core i5-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxx (Ivy Bridge) Quad Core	676
  Intel Core i7-3xxxK (Ivy Bridge) Quad Core	676
  Intel Core i3-2xxx (Sandy Bridge) Dual Core	756
  Intel Core i3-2xxxT (Sandy Bridge) Dual Core	256
  Intel Core i5-2xxx (Sandy Bridge) Quad Core	95W
  Intel Core i7-2xxx (Sandy Bridge) Quad Core	95W
  Dual-core Intel Pentium G6xx (Sandy Bridge)	756
  Dual-core Intel Pentium G6xxT (Sandy Bridge)	256
  Dual-core Intel Pentium G8xx (Sandy Bridge)	756

  and supported memory;

  Dual channel memory architecture
  Four DIMM DDR3 240-pin connectors

  Supports DIMM DDR3 modules

  PC3-10600 (1333 MHz)

  PC3-12800 (1600 MHz)

  Memory non - ECC, unbuffered

  Supports 1 GB, 2 GB and 4 GB DIMM

  Supports up to 4 GB on 32-bit systems

  Supports up to 16 GB on 64 - bit systems

  Frank

• You can install DDR3 1066 mhz Ram in the Satellite C660-116

  You can install RAM DDR3 1066 mhz in this laptop?

  (C660-116)
  1 GB of Ram DDR3 at 800 mhz
  at 800 mhz front side bus

  Thank you

  Post edited by: jim155

  You can, but it will not help you because the FSB is clocked at 800 Mhz and 1066 Mhz how fast would be clocked at 800 Mhz.

  For example; you ve got a Ferrari but can't drive at full speed due to the alley. So why buy a Ferrari if you cannot drive faster ;)

• Pavilion A4316F Desktop with M2N78-(Violet6) card mother CPU Upgrade

  I looked at the HP Site before making the CPU to upgrade to purchase (http://support.hp.com/us-en/document/c01925562) my office.  I bought an AMD Phenom II x 4 processor clocked at 3.4 Ghz.  When I installed the CPU and try to start, I have a unknown, computer processor stop error.  From what I can tell on the HP site, this processor should work with this motherboard.  Any suggestions?

  Please provide the role other than whole or number of the plateau of the AMD processor for our review. Only 3.4 Ghz AMD Phenom II x 4 processors I know are the 125 watts Note: AMD Phenom II x 4 965 Black Edition and the140 watts Note: AMD Phenom II x 4 965 Black Edition. None of these processors are compatible with the Violet6 motherboard in your system. The card mother Violet6 is intended to be used with processors up to 95 watts. In addition, "Black Edition" CPUs have discovered clock multipliers to be used in overclocking, but does not support the Violet6 overclocking motherboard.

  Please consider these 95 watt AMD AM3 processors except CPU 'Phenom II X 6' and processors ' B #

• I get a Toshiba satellite 1900-102 with a default card mother work

  Does anyone have a default Toshiba satellite 1900-102 with a card mother work and is willing to sell?

  Or does anyone know where to find that?

  Hi Erdl,

  I think this is the wrong forum to ask questions about buying used and portable defects! I understand toshiba as well as this forum is only for technical user to help!

  In my opinion, you will have more luck at ebay or used equipment selling home pages!

  Sorry
  Campino

• After some time, my screen goes black have to re boot. It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr

  After some time, my monitor goes black have to re start at 5 min to 2 h said mge device is grapish until this day.   It is only on I pc the other pc on the same monitor works okay my video card is on the card mother all ansawers would help t / you rkfjr XP HP pc 1.3 gh 512 ram 120g hd

  Assuming that the integrated graphics controller is OK, try the following:

  Launch a command (as a Runas administrator) window and enter the following commands in it:

  powercfg-h off

  powercfg/change-standby-timeout-ac 1440

  The first command turns off "Feature of putting into hibernation"

  The second command replaces the timeout stansby 24 hours when the system is connected to AC power.

  (The number is in minutes).

  Good luck.

• Card mother MS-7613 Iona: Corsair XMS 3 2 X 4 GB DDR3 1333 mhz compatible?

  Hi all.

  I have a simple question: is this compatible with the standard ram card mother MS-7613?

  http://www.Corsair.com/en/CMX8GX3M2A1333C9

  How did you select the Corsair ram?   I can't find a link suggesting its compatibility with your exact computer. I found three different modules 4 GB here who are recdommended.   Found an example of it on Amazon.

• R400 - bought ddr3 1066 mhz memory but works in 399 mhz?

  Hi, I own a Thinkpad R400 and recently I bought memory for her. Memory is 2 x Samsung PC3-8500 1066 mhz DDR3 1 GB and now that I'm checking CPU - Z for mem clock it says its 399 mhz running? Latest version of Memtest 86 + reports also 399 mhz DDR800. This does not seem fair to me. CPU - Z says as FSBRAM ratio is 1:2, Bus speed: 199.5 MHz and FSB: 798 MHz I have the latest version of the bios for R400 which I think is of 3.20... motherboard is 7440WHW, I don't mean to overclock any component just get whats promised. Help, please.

  This may be the result of your CPU (T6670) that can be run at 800 mhz FSB, rather than the P8xxx, T9xxx, P9xxx, which can operate at 1066 mhz FSB.

• sequence of the RAM on the card mother dx58m01

  I have a dell xps 435mt core i7 920 with a studio card mother dx58m01. There is 6gig ram. 6x1024mb glue 1066 mhz. I want to change ram at 3x2gig sticks memory triple channel 1600 mhz. does anyone know the sequence of installation for this configuration. I currently at 1,3,5. It seems to run pretty slow however. Thank you guys

  Contact Support technique Dell http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&cs=19&l=en&s=dhs& ~ ck = anavml and give them your express service code and/or your product tag so that they can identify your specific machine.  Are all devices that are identical except for the new chips?  Then they should be able to tell the order to use because they know a lot more about their systems we do.  We could just guess they know.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite in a series - error: conflict of resources - PCI on the card mother BUS: 09

  What started it stops early on with the error:
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 00
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 02
  -Conflict PCI resources on the card mother BUS: 09, device: 01 function: 03

  I have the option to continue with F! that works.
  I use Windows 8 at the moment, but it seems not so stable. Above mentioned mistakes occurred that after awhile, I upgraded to W8.

  Do I need a new motherboard, or y at - it another option. What does this error mean in normal words.

  Hmm, it looks like a problem with the motherboard or part connected to the motherboard.
  The error indicates this device 01 because of controller 09 conflict
  Have you tested the RAM?

  Recommend doing this! You can use a tool like Memtest or similar.
  Maybe it isn't that a Ram problem and new modules could solve your problem.

• HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

  So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

  To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

  If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

  Thanks to all who take the time to read/answer

  Drew

  At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

  You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

  EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

  Cards with BIOS double EVGA

  http://www.EVGA.com/articles/00767/

  I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

  Sapphire video card specifications

  http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

  What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

  I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

• Can I switch to an Intel Pentium D 945 on a card mother Napa-GL8E?

  Hello, I have a HP Pavilion a6403w with an Intel Dual - Core processor E2160 (1.8 GHz) on a card mother Napa-GL8E. I would like to know if it is possible to switch to an Intel Pentium D 945 (3.4 GHz) on this motherboard. Before that everyone goes to the top and say no, I read a few post image Core 2 s running on this motherboard. And if an Intel Pentium D 945 would not work, what else would be a good upgrade for my PC? Thank you.

  (Edit: Opps, I posted this in the wrong forum.)

  Computer a6403w and Napa-GL8E pages care about motherboard;

  Type of socket: 775
  Motherboard supports the following processor upgrades
  Intel Core 2 Duo (Wolfsdale) E8xxx
  Core 2 Duo E6xxx until E6850 (Conroe)
  Pentium (Conroe) E2xxx series with Dual Core E2160 technology
  Core 2 Duo E4xxx (Conroe)
  Celeron 4xx series (Conroe) until Celeron 450

  Based on this information, the Pentium D 945 only is not supported on this platform. Referring to your "multiple posts reading" on quad-core Core 2 on the Napa, the information relates mainly to non - OEM versions (read no HP) of the Board of Directors. Sumsolstice mentions the internal docs showing micocode updated but does not purely and simply that it will work. The best processor would probably be the Core 2 Duo (Wolfsdale) E8xxx series.

  Frank