CD player does not, will not drive at all read please help!

Similar Questions

• DVD player does not work error code 36 please help

  I have a computer toshiba laptop satellite my dvd rom is not working, it does not give me the error code 36

  Hello

  In addition to the BIOS settings the player himself could have problems.

  -------------

  This instrument requires a PCI interrupt but is configured for an ISA interrupt (or vice versa).
  Please use the computer's system setup program to reconfigure the interrupt for this device.
  (Code 36)

  Interrupt request (IRQ) translation failed.

  Try to use the BIOS Setup tool to change the settings for IRQ reservations (if such options exist). The BIOS can have options to reserve certain IRQS for interconnection of peripheral components (PCI) or ISA devices. For more information about changing the BIOS settings, see the documentation for the hardware.

  On the tab General properties of the device, click Troubleshoot to start the Troubleshooting Wizard.

  --------------------------------

  Check with Toshiba support

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  ===========

  If you have problems after checking the BIOS settings:

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?

  Hi kdwis,

  Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.

  Hope this helps!

• I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  I installed the birth of nations gold on my new pc... it has windows 7. the installation was successful, but the game does not start... Please help!

  Hello

  1. what happens when you try to start the game?
  2. do you have messages or error codes?

  Follow the steps in the article mentioned below and check if this solves the problem.

  Known graphics issues in Rise of Nations
  http://support.Microsoft.com/kb/820089

• My DVD player does not work and all the information I can find is "this device does not work correctly.

  Hi, I have Windows Vista and I use a computer laptop Dell studio. When I insert a disc into my CD/DVD drive, the drive spins and it looks like it is about to start and makes the same noise start several times and then just stops. My computer does not record that there is a disc there. If I double click on the DVD drive in 'My computer' it ejects my disc and says "insert the disc in drive E".

  I went on the 'repair' Microsoft online scanner and it told me that there is a problem, but he can fix it. In Device Manager, under CD/DVD-ROM readers I have Optiarc DVD +-RW AD - 7640S. Under device status - general - properties, it says "this device does not work correctly. He also says that I have the updated driver.

  I even uninstalled the driver as a last resort and then restarted my computer. It reinstalled the driver for me, but there was no change. Please help me!

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry
  entries that do not fix the resolution of problems and those who "could" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys in my opinion, are those in question - for the CD/DVD drive of course subkeys as
  There will be other subkeys in these keys. Do not forget to ask involved specific keys as well as the
  Parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• My bluetooth does not work... Please help

  Hello!

  I use bluetooth to transfer music, pictures etc for my mobile. I have windows vista. One time, I tried to remove three connections to old bluetooth device (mobile) that were matched to my laptop. But it seems that something was wrong and they do not have to remove it completely and I can not pair with any devices now. When I try to connect to my cell phone, the laptop acknowledges that a device tries to connect but go no further than that. I can't do anything with the devices I've tried to remove... I can't get in they are.

  I reinstalled the driver bluetooth but that did not work. This is the error message I got event management. Please help if you can, its driving me crazy.

  Error 21/03/2010 22:35:15 BTHUSB 16 none

  Log name: System
  Source: BTHUSB
  Date: 2010-03-21 22:35:15
  Event ID: 16
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: LT
  Description:
  Mutual authentication between the local Bluetooth adapter and a device with Bluetooth adapter address (00:24:ef:8 c: 7e:b8) has failed.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      16
      2
      0
      0 x 80000000000000
     
      297811
      System
      LT
     
   
   
     
     
      (00:24:ef:8 c: 7e:b8)
      000000000200280000000000100005C 0000000000000000000000000000000000000000000000000
   
  

  Hello

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  works as expected when you click the item
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the manufacturer of your system and/or the actual peripheral manufacturer support site
  site.

  BluetoothView is a small utility that runs in the background and monitor the activity of
  Bluetooth devices around you. For each detected Bluetooth device, it displays the following
  information: device name, address, Major Device Type Bluetooth Type device minor, first
  Detection time, last detection time and more. BluetoothView can also inform you when a
  new Bluetooth device is detected, by displaying a balloon in your bar tasks or playing a
  a quiet sound signal. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all current detected bluetooth devices
  to the standard output. For each Bluetooth device, the following information is displayed:
  Address MAC, Minor Device Type, Device Type Major and possibly society
  name of the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• MacBook does - not in the charger light - please help

  Hello

  I woke up this morning and went to turn on my computer and the screen was completely empty, assuming he was dead although him please connect to power screen does not turn on I went to plug it in, as I plugged it, saw that the green light in the cord of the charger is not alley red or green or light upward at all. Then I went to Staples and got a new charger agreement, to my dismay, this is also omitted to light and the screen still turn.

  I tried other things posted in the forums as adjustment of the SMS or whatever they call that but does not

  I'm just a high school student and I need this computer term full assignments

  If you know what I'd be extremely grateful for your help

  Thank you

  Make an appointment at the genius bar to your Apple store. Looks like it's maybe a hardware problem.

• Help! My desktop screen does not load Aspire 7750-6669 Please HELP!

  Last night I ran a cleaning of PC program on my Acer because someone suggested it would help with my laptop running. After you run the program, I had to restart the computer, and when I did, the 'Starting Windows' screen, then the screen of "Acer Microsoft" (green page) came. When the little green circle begins to initialize the page desk with all my icons and the 'Start' button on this point, the screen turns black. Only the cursor is on the screen. After leaving, that she set half an hour in the hope that it would finally come, the screen saver is displayed.  Someone help me please get my screen back so that I can use my laptop! I'm borrowing my computer of neighbors for this post. I am disabled and my phone is my only link to civilization! I can't afford to pay hundreds of dollars to buy a new one or pay for technical assistance here. (Warranty expired 2 months ago) I have an Acer Aspire 7750-6669 cell.

  Hello...

  You can perform power drain to check the issue.

  To perform a reset of the diet:

  1. Unplug the power adapter for your laptop.
  2. Turn the laptop to remove the battery. Turn the computer over and open it.
  3. Press and hold power for 30 seconds, and then release the power button.
  4. Turn the laptop and replace the battery.
  5. Drag to the locking position locking tab.
  6. Turn the laptop again and plug in your power adapter.
  7. Turn on your laptop.

  If the problem persists, you can restart the computer and then continue to tap the F8 key to enter in safe mode, and you need to perfiem a system restore to previous date that the computer had worked well.

  System Restore affects file system of Windows, programs and registry settings. It can also make changes to scripts, files, batch and other types of executable files created under any user account on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file. If you have backups of your files, you can restore files from a backup.

• My laptop with Windows Xp does not connect to the internet, please help me!

  Then my laptop, as indicates it works on Windows Xp, but even if I'm supposed to be connected to my home network, when I run Internet Explorer, it can not connect to internet. Any help and insight will help. Please help me!

  I'm sorry that had to retype all of this, but in essence, that everything indicates that things work correctly with your Internet connection.

  To translate, the first bit tells us that your router assigned your computer 192.168.0.12 IP address.  The own IP address of the router is 192.168.0.1

  The result of ping 127.0.0.1 indicates that your computer can communicate with itself (the adapter is OK)

  The 192.168.0.12 ping result indicates that your computer can communicate with your router (that we already knew because otherwise your computer don't would not have been assigned an IP address).  It also means that you are connected to your local network.

  The result of the ping 192.168.0.1 is similar to the 127.0.0.1 test.

  And finally, the ping Google result shows that you are able to access the Internet.

  Knowing all this, you probably need to reset TCP/IP or Winsock, or both.

  Manually:

  Open a command prompt window and type

  netsh winsock reset {enter}
  netsh int ip reset c:\resetlog.txt

  Or see these two articles from Microsoft, include the two "FixIt" links
  How to reset Internet Protocol KB99357 How to determine and recover from Winsock corruption 811259 KB 2

• WiFi suddenly does not work... Please help, so infuriating!

  Hi Please help, it's happened with this machine and I changed a few settings from the last time and he just started working again. I'll try to give as much information as possible... My first experience with HP was not good!

  HP pavilion laptop
  Windows 8

  My home network appears after a reboot, but when I try to connect to it it says unable to connect and then disappears completely from the list.

  Works well with a wired connection, reset the router has no effect, restoring the settings in the Bios has no effect, all other devices in my house connect correctly. When I first bought the laptop could not find my network, I tinkered around with the settings and it works but I have no idea of what I did. A few weeks later after I upgraded to 8.1 the issue it ugly head again. I got some how he connected again and now he did once again, no amount of fiddling with this time is to help.

  It's so infuriating because it just seems to happen overnight without any help, I tried to follow the advice line of people with similar problems, but nothing helped.

  Please help solve this problem

  Hi HeffCyprus, welcome to the Forums of HP. The first thing you should try is to rename the SSID of your WiFi. This fixes a lot of this type of questions, where you cannot find wireless networks. Which can be done in the settings on your router somewhere.

  If this fails, try this: troubleshooting wireless network and Internet (Windows 8)

  In addition, I will need to know the specific of your laptop model number.

  How can I find my model number of the laptop?

• my CD player does not work - find all that is on the CD online?

  Hey everyone, the 1st time poster - be nice

  As it says in the subject... cannot use the CD that came with my Photosmart 7520. Is there a place online I can load everything that is on the CD? It's just the drivers? Can I use the printer without all that is on the CD?

  Thanks in advance for any help.

  Hey,.

  You can download the latest version of the software on the HP site, it is exatly the same as the original CD.

  Select your operating system below, then devote the driver category and download the full software functionality:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=5199463&task=&

  Kind regards

  Shlomi

• WRT54G v3 does not establish a wireless connection - Please HELP!

  My modem and wireless router both seem to be fully functional. Yet, the only way that my computer connects to the internet is if I connect directly to the router. It's as if my computer can't find the router... my SSID is sometimes only appear in the list of available network connections and when that happens, will not make a connection... How can I solve this problem? I'm not super intelligent computer, but I can follow directions well. Help, please!

  Connect the computer to the router with the Ethernet cable.

  Open the router setup page and go to the Wireless tab, change the name of the wireless network to create a new wireless network. Change the channel to 11. Save the settings.

  Go to wireless security tab Change the WPA/WPA2 wireless security mode and enter the password of the wireless network. Save the settings.

  Click the sub-tab to Wireless MAC filter and make sure that it is disabled.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings.

  Now try to connect to the new wireless network and see if it works.

• BlackBerry Smartphones Desk top manager does not work on my computer please help

  I downloaded the software and installed and when I open it up to the top of the custom program work I found a troubleshooting on the forums and tried and it did not work for me. I don't know what to do short of calling rogers. Can someone help me on I am running windows XP

  I found a post that finally worked for me and was able to get all the .netframes GONE and went up the installed DM6 followed this post

  http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/help-rim-desktop-exe-no-debugger-foun...

• Model does not update... Please help.

  The class below is the model in the MVC triad. It works fine when the businessUnits array is filled manually (see block commented in the constructor). However, when the data are uploaded from a MySQL database using a php script, businessArray is NOT filled (see attached screenshot), an error is generated. I know it's to do with "listening/waiting" for the download to complete before completing the table businessUnits, but I have no idea how do. Help, please.

  package
  {
  import flash.events.EventDispatcher;
  import flash.net.URLLoader;
  import flash.net.URLRequest;
  import flash.events.Event;
  to import flash.net.URLVariables;
  import flash.net.URLRequestMethod;
  import flash.net.URLLoaderDataFormat;
  model/public class extends EventDispatcher implements IModel
  {
  public protected static var beFields:uint = 7;
  private var businessUnitsLoader:URLLoader;
  private var businesz:Array;
  protected var businessUnits:Array;
  protected var chosenBusinessUnit:uint;
  Constructor
  public void modele()
  {
  /*
  businessUnits = new Array();
  businessUnits.push ({be: 0, fr: 9, cod: bem "R & D",: "Research & Development", nice: bex "R & D Long",: "R & D explanation", beh: "R & D help"});
  businessUnits.push ({be: 0, fr: 10, cod: bem "T & E",: "Education and training", nice: bex 'E & T Long',: beh 'E & T explanation',: "E & T help"});
  businessUnits.push ({be: 0, en: 2, cod: "BINC", bem: "Business Incubation" ", beautiful:"BINC Long", bex:"BINC explanation", beh:" help BINC""});
  */
  businessUnitsLoader = new URLLoader();
  businessUnitsLoader.load (new URLRequest ("http://localhost/InteractiveStrategy/businessUnits.php"));
  businessUnitsLoader.dataFormat = pouvez;
  businessUnitsLoader.addEventListener (Event.COMPLETE, onComplete);
  function onComplete(event:Event):void
  {
  businesz = businessUnits.data.businessUnits.split("*");
  businessUnits = new Array();
  for (var i = 0; i <(businesz.length-1) /beFields; i ++)
  {
  businessUnits.push ({be: businesz [beFields * i + 0], en: businesz [beFields * i + 1], cod: businesz [Virginia areas * i + 2], bem:businesz [beFields * i + 3], nice: businesz [beFields * i + 4], bex:businesz [beFields * i + 5], beh:businesz[beFields*i+6]});})
  }
  businessUnits.sortOn(["be","cod"],[Array.NUMERIC,Array.CASEINSENSITIVE]);
  }
  this.chosenBusinessUnit = 0;
  }
  Methods
  public function getBusinessUnitsList (): Array
  {
  Return businessUnits;
  }
  public void getBusinessUnit (): uint
  {
  Return this.businessUnits [chosenBusinessUnit] .in;
  }
  public void setBusinessUnit(index:uint):void
  {
  this.chosenBusinessUnit = index;
  This.Update();
  }
  public void getBusinessUnitName (): String
  {
  Return this.businessUnits [chosenBusinessUnit] .bem;
  }
  Update of the model
  private void update (): void
  {
  dispatchEvent (new Event (Event.CHANGE));
  }
  }
  }

  so, your template class must send an event to your instance of model, and this instance should trigger the instantiation of the bus (your instance BusinessView) so when you move the model to your BusinessView data have finished loading.

• Dear all, dream weaver 5.5 does not work on windows 10, please help?

  I just updated my windows computer for windows 10 8. I noticed that dreamweaver 5.5 has stopped working, what can I do to solve it?

  Hello

  Please try below steps. If all goes well it should solve the problem.

  1. open CMD as administrator.

  2 run the sfc/scannow command...

  3. once it is filled to 100%, start Dreamweaver.

  Thank you!

  Kusha