Cftransactions works with MS Access databases?

Similar Questions

• BAM works with the Oracle database only in the backend.

  Hi, I was wondering if Oracle Business Activity Monitor (BAM) implemented in ADF application works with the Oracle database as Oracle database is one of the databases very little supporting the database change Notification? Or can it be implemented using database of MySQL etc.
  
  Thank you!
  
  Published by: 996574 on June 3, 2013 14:06

  As far as I KNOW only Oracle db supports the database change Notification.

  Timo

• Working with local SQL databases in AIR

  This question has been posted in response to the following article: http://help.Adobe.com/en_US/AS3/dev/WS5b3ccc516d4fbf351e63e3d118676a5497-7fb4.html

  Hi Randy,

  I understood it.  To work with a database on the device or on the desktop while you develop your application, the directory must be resolved in the documents directory so that the file can be copied into this directory.

  It's the line of code that allows to:

  var writeSessionDB:File = File.documentsDirectory.resolvePath ("myLists.db");

  Neil

• How to work with the "access restrictions"? Help, please

  Hello

  How can I restrict internet access at certain times for the same terminal (PC)?

  For example I want to allow the MAC address for Computer1 to access internet (each Tuesday and Friday) for 2 hours between 11:00 to 13:00 and the second hour is from 17:00 to 18:00

  Terminal: day: (access time)

  Computer1:Friday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  Computer1unday (allow access 11:00 - 13:00 and 05:00 - 18:00)

  and to deny access to all the other times.

  How to do this?

  my router is wag54g2 Firmware Version 1.00.19

  There are two types of policies: you can't deny all internet or you can allow internet with few exceptions closely (filtering).

  You want to block internet completely, so you want to deny only policies. You don't want to do filtering. At the time where internet is not blocked, you want full internet. (?)

• How to work with files of database on an external hard drive (USB 2.0 or 3.0)

  I have Oracle 11 GR 2, installed on my laptop. I would like to create an instance of the database on my laptop, but putting the data files on an external hard drive (USB 2.0 or 3.0). The external hard drive will be still attached to the laptop, whenever the database is used. This is going to be a development machine, recently developed a prototype. Laptop is limited to 150 GB on the local disk and I want to have a database of 1 to on this subject. Is this possible with Oracle 11 g for Windows XP SP2?
  I assume that a device attached to the network storage NAS would be the best solution, but I can't fix on my local network.
  Thank you
  Milan

  Hello

  Yes, you can
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:1388988500346624289

  Thank you

• Cannot get my Satellite Pro to work with internet access wireless

  I have a Satellite Pro L20 - who has wireless network adapter. Bought a BT Voyager 2110 Wireless ADSL router. Connected to my broadband router. Used Toshiba config to find router on my laptop - it looks like I have then drag the icon of the laptop to the router but it says I can't do because the router is used by another owner?
  Should I do anyting - Inter adapter card in my laptop says activated - the router is connected - but nothing works.
  Please help but I'm pretty useless on these things so keep it clear
  Thank you

  Hello

  Is this the result even when you use the settings Windows wireless?

• Acrobat Reader 15.2.1 on iOS 9 is no longer compatible with VoiceOver Accessibility

  Acrobat Reader used with work with VoiceOver Accessibility on IOS devices.  It allows to read the texts (text to speech) very well.

  I have put reently upgraded to the latest version of Acrobat Reader (15.2.1) on November 20, 2015.  It is no longer reads the texts.  Correct the problem and make it compatible with VoiceOver.

  Thank you.

  Hi cw34,.

  We just published the new update (16.02.23) to the App Store on February 17, 2016.

  The update includes improved support for VoiceOver.

  Please try it and let us know what you think.

  Thank you!

• The EOM to Oracle 11g works with clients of 9i

  If I install OEM 11 g on a Windows Server, I download emca data to a database in Oracle 9i on a SUN Server?

  Take a look at the Certification Oracle Enterprise Manager Grid Control auditor [ID 412431.1] on My Oracle Support.
  Here you will find all the combinations that have been certified (11, 10.2) WHO works with as agent, database, etc.

  Eric

• Portege R500 - TrueSuite Access manager does not work with IE 8

  TrueSuite Access Manager does not work with Internet Explorer 8

  Version:
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager 2.1.23.0

  Any idea?

  Thankx
  Robert

  Hello!

  Which laptop computer and operating system you have?
  And what do you mean with it doesn t work? You get an error message or something else?

  You must give us a little more information. Otherwise, we can t help you my friend.

  Good bye

• Need help! Working with SQL databases

  Hi all

  I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

  I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

  With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

  But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

  Here is the code that I currently work for a single selection in the drop-down list.

  

  Any help is appreciated. See you soon.

  tdog says:

  Hi all

  I am currently working on an application that interacts with a SQL database, and it seems to have hit a roadblock.

  I have a multi-column list box on my front which is filled with the data extracted from the database. By choosing one of the lines in the list box, another opens showing another set of data retrieved by a generated SQL query. At the moment I only select one line at a time to see it has the data, but I want to expand such that I can select mutiple rows in the list both box and see all their relevant data.

  With only one selection, I can switch the index value of the selection of a function table of Index with the database as another entry and build my SQL statement.

  But with multiple choices, I guess I have to build a table on the index values and use them as reference to build the SQL statement. And I don't know how exactly to do that.

  Here is the code that I currently work for a single selection in the drop-down list.

  Any help is appreciated. See you soon.

  Regarding the table of construction:

  I can see Hat multicolumn listbox you have multiselection enabled and is limited to one or zero element selected at a time. To allow multiselction; Done just right click your multi-column listbox and change your selection to support multiple selected items. The NewVal to the structure of the event should change to a single index number in a 1 d of the numbers indexed table. No coding required. Then just to retrieve all items (since you know the index) and create the quiry. Quiry part, I'm not really (long time no see SQL), but it looks like a loop for to create the chain should do the trick?

• Problem with insert/update statements on the MS Access database

  Hi all

  Before posting this question, I did a search and found this thread.

  I have the same problem as pawel had (in this thread), i.e. cannot insert or update data in the Access database. However, the reason is not that I am using some keywords in my domain name - it has been several years using SQL, some things are 'unwritten' rules But this is the first time I try something in LV

  However, after losing all day for work that I expect to do the same morning in 1 hour, try many different options and debugging until the level low in the Toolbox of data base screw (building or higher), I saw some weird SQL statement being trained in-house - so I tried what Troy has tried.

  "password" is a reserved word in the Jet.  I just looked at MOManagers_M, but by changing the field "password" to 'passworda', it does the job.

• Cannot access files on hard disk on windows xp, after I worked with it on win 7.

  Cannot access files on external hard drive on windows xp, after that I worked with him on Victory 7.I can see the file, but he says "is not accessible. access is denied. " Can someone help me?

  As you can guess, this is a permissions problem.  Here, it makes a difference if you have XP Home or Pro you have to safe boot mode to change permissions in the House.

  My crystal ball says that your external drive is formatted with the NTFS file system.  When you connected to Windows 7 (or any other computer besides), the files have been added that this user permissions apparently understood that only Win 7 has access to.  There are several ways to handle this...

  Is to save on all your files and reformat the external hard drive with a FAT32 file system and then support files.  You will have no problems of permissions with FAT32, but you can't have any higher than 4 GB single file either.

  Another way is as an administrator, to 'Ownership' of all the files on the disk
  "How appropriate a file or a folder in Windows XP"
     <>http://support.Microsoft.com/kb/308421 >
  but this could get old if the drive moves back.

  Yet another approach is to give "Everyone" full access to everything on the drive.  This may or may not protect against new folders or files added, but may be worth a try:
  As a user administrator, open a command window:
  Start-> Run-> "cmd".
  Then, enter the command:
  CACLS E:\/t/e/c/g everyone: F
  (where I am assuming that your external drive is mounted as "E:" - change of real player)

  I hope that something more top is useful...
  JW

• Connectivity to MS Access database with java in vista Home premium 64-bit

  I made a dsn in vista home premium(64-bit) using Windows\syswow64\odbcad32.exe, to connect MS Access database to java, but the performance of the prog in java, it gives an error (no such driver found)

  Means of access:

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://social.answers.Microsoft.com/forums/en-us/addbuz

  Access support at the link above.

  They will help you with your questions of access when repost you in the Office Forums above.

  At soon Mick Murphy - Microsoft partner

• Intel WiDi Pro works with Microsoft Direct access?

  Our company deploys a Direct access to avoid using VPN tokens, so the use of laptop with Windows 7 without DA WiDi society construction works without any problems, but when you add DA at this laptop it stops work WiDi. He will see the WiDi adaptor and even ask the PIN code, but once to enter the CONFIDENTIAL code to connect to the screen, it will lose the connection, and then I also have to reset the WiDi dongle (we currently use the dongle Microsoft WiDi)

  For all help and advice on how to the GET WiDi work with the DA would be appreciated

  Thank you

  Wayne

  Hi Wayne,

  Thanks for posting your query on the Microsoft Community.

  That you are connected to a domain network, I suggest you re-post your query on The TechNet Forums as we have experts working on this type of questions and for you to help.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• I used to work with Interbase and Firebird and used databases the keyword "domain". I am now switchig to Oracle as a primary database and would like to find an alternative appropriate "domain" in Oracle, as it appears he does ' t taken in charge the stand

  I used to work with Interbase and Firebird and used databases the keyword "domain".

  I am now switchig to Oracle as a primary database and would like to find a suitable

  Variant of 'area' in Oracle such that it appears he does ' t support the standard SQL syntax.

  for example:

  Create the int2 smallint field;

  create domain id2 int2 default 0 not NULL; / * for the primary key * /.

  create domain rel2 int2 default 0 not NULL; / * foreign key * /.

  I tried a couple of approaches to achieve this "area" is:

  1. create synonym - cannot be used with the basic types;

  2. create the type - type of work, but the implementation is rather clumsy

  and can be costly in terms of performance.

  Is there something else to Oracle that can emulate the feature "domain"?

  Thanks in advence, I got really approciate any help on this.

  Alex.

  Your best approximation is CREATE TYPE, but their is nothing of what is a 100% adjustment.

  For example, if you create a domain with a check constraint you need to implement than separately on each table.