change local LDAP to Active Directory user is impossible (LCM device 1.0.1)
I try to change user for access to the page web vmo but connection failed if I try to access
in VMO with credentials differs from the standard (lcmadmin/admin,
lcmuser/utilisateur, ecc... set in embedded LDAP).
I have Active Directory settting and connection test is successful.
With this work the connection in orchestrator web config: UO = e list groups, DC = domain, DC = local (I set it in list e gruppi: lcmadmins)
The VMO admins I put: CN = lcmadmins, OU = e list groups, DC = domain, DC = local (I add a member user lcmadmins)
Can you help me because the connection with Active
Directory is successful but I don't enable HOV access with
identification of user AD information?
Best regards
Andrea.
It is not possible to change LDAP settings for LCM workflows, once initialization of the LCM.
Tags: VMware
Similar Questions
-
Changing LDAP to Active Directory - Admin indented
Hi, this overlaps with the CPS forum topic, I know. But it's more than one Administration section, I think.
I am moving to Active Directory, and I made the switch to the CPS administration screen. I did a test search and it works very well. I logged in Contribute, and my connections are parties. To create a new connection to the site, the message says "Needs to Contribute to remove the administrative settings." Is there a way to get around this? I have some users and roles. There may be a text file buried somewhere that I can change to keep the settings somehow? I see no way to export the settings of collaboration, as you can do with Dreamweaver site settings.
Anyone know of a hack for this?
Thank you!
Hello
You can try this: CPS console change on the previous LDAP setting. Now in Contribute create the connection to your site and disable Contribute Publishing Server. In the CPS console, change the setting to Active Directory. Now, in Contribute, select the Contribute Publishing Server. You will lose all the roles, you may need to add users to the appropriate roles so new.
-
MMC.exe APPCRASH
When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help
Problem event name: APPCRASH
Application name: mmc.exe
Application version: 6.0.6001.18000
Application timestamp: 47918d 09
Fault Module name: KseAdm.dll
Fault Module Version: 6.0.1262.1064
Timestamp of Module error: 49426cbb
Exception code: c0000005
Exception offset: 0004 849 d
OS version: 6.0.6001.2.1.0.272.7
Locale ID: 1033
Additional information 1: fd00
More information 2: ea6f5fe8924aaa756324d57f87834160
Additional information 3: fd00
Additional information 4: ea6f5fe8924aaa756324d57f87834160
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Backup permissions for Active Directory users
Hello
is it possible (e.g. by vim - cmd), permission settings backup referring users to the AD?
I have a domain controller which is a failure sometimes briefly and whenever that happens, forget my esxi / loses all permissions for users of the AD, while I again subsequently enter manually.
Or does anyone have another tip for me, which could help prevent the loss of permission to users of the AD settings?
Thanks in advance!
I would investigate why your DC is falling, as it seems that causes the initial problems. as far as I know, once permissions have been applied, they should persists, but since your DC is down, I can't really say what is the expected result. You can take a look at newspapers to see if it takes DC are available to keep the roles, etc.
In any case, if you need to quickly redeploy rules using vim - cmd, take a look at this blog post - http://www.virtuallyghetto.com/2011/02/automating-active-directory-user.html
These permisisons must be stored under etc/vmware/hostd/authorization.xml, so you could technically simply this backup file and restore if necessary. You probably need to restart either process pass or the host so that the changes take effect
-
IOM 11 GR 2: Active Directory user target Recon
Hello Experts,
I ran the Active Directory user successfully target Recon in OIM 11 g 2. The event is get created and the data are read in the data section of reconciliation to schedule the work.
In which database table I should check for reconciled entry.
Kind regards
VarunRA_ADUSER81
(Assuming 81 is the user AD OBJ_KEY")
RCA, series BCR etc belongs to IOM 10 G... 11G architecture Recon has been changed...
-
Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?
Hello
Active Directory users & computers does not open in MS Server 2003 Enterprise 64-bit?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
recover deleted active directory users
I got Server Essentials 2012 version final candidate installed on my server, and I got to this level because the license runs out. So, to do this, I formatted the hard drive and installed the trial version of Server 2012 Essentials.
However, since I deleted all the objects directory active Directory, users can access their profiles the SID are all different... something I did not consider at the same time.Is that what I can do to assign these profiles to another account SID or something?I have Windows 7 and Windows 8 customers.Thanks for any help you can offer.Although you should check for a definitive answer in a forum server, I'd say you're watered. There is no way to re - associate old profiles with a SID generated recently to a different domain controller.
PS - You should never, EVER, run evaluation or beta software in a production environment. But you probably figured that now. ;-(
-
Where can I find and download the Active Directory users and computers for Windows 7
Where can I find and download Active Directory users and computers for Windows 7
Thank you
Fred Tarpley
Announcement is not a consumer product. You'll be much more likely to get an answer as to where you can buy it on TechNet (for IT Pro)
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
How to get him Active Directory users and computers that are running on 64-bit Windows 7
I have windows 7 ultimate 64 bit installation. I need to download to get him Active Directory users and computers users and computers to manage the windows 2003 server environment. Used to use AdminToolpack2003, but that does not work on my version of Windows 7.
Hi Trickymonk,
You can download it from the link: for Windows 7 Remote Server Administration Tools: http://www.microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=7d2f6ad7-656b-4313-a005-4e344e43997d
For a similar question, see the link: http://social.technet.microsoft.com/Forums/en-US/w7itproappcompat/thread/a0b24e31-0290-415b-8448-c367bde3e2c9/
Thank you, and in what concerns:
Swathi B - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
-
Add Active Directory users on object permissions in Virtual Center
Hello
I want to give permissions for virtual machines. Usually, it's simple. My problem is when I list my domain users to give permissions, Virtual Center is not listing all my Active Directory users. It's just the list users at random. I don't see any connection between users that are listed, and between which are not listed. I use the latest version of Virtual Center 2.5.
Thank you
Stéphane
maybe try to increase the time-out of the AD.
-
Active Directory users are authenticated web-auth (web-auth has only LOCAL users)
Hello
I have a model WLC 4404 with software version 4.2.205.0.
I have 2 SSID: Wireless and invited
-Wireless: using [WPA + WPA2] [Auth (802. 1 X)]
-Guests: use Web-AuthIn the guests of SSID (WLAN-> Edit > AAA security servers I have not all enable server - option there is NOT and not activated-).
I do not understand that the request for authentication is attempted ONLY locally to the WLC but not in the ACS (ACS has been configured in security-> RADIUS-> authentication).
When a user authentication Web Page inserts user and password of SSID wireless (users who need to be authenticated in Active Directory via ACS) it is authenticated.
I need to change this behavior.
There are a few options depending on what you are using the code.
6.0 and higher, there is an option in the WLAN directly, select only LOCAL.
5.2 below, under Radius authentication servers, uncheck the box for the user of the network. This check box allows the WLC to use the servers in the world, which means that if it is not precisely defined under the WLAN, it can / will still be used
-
Active Directory user profile question
I have a weird problem. I use two server Remote Office Server R2 2012 with roaming profiles. If I create a new user profile in active directory all works fine. I had a situation where I had to remove a user profile for cause of termination. He was rehired after 3 days. I created a new profile with the same username as before. Now, when the user connects, they are logged in a temporary profile. There is no .bak profile lists on with rds server. Event files give a 1521 event ID Windows cannot locate the server copy of your roaming profile and is trying to connect you with your local profile. Changes to the profile will not be copied to the server when you log off. This error can be caused by network problems or insufficient security rights.
DETAIL - access is denied.
and 1511 Windows cannot find the local profile and connects you with a temporary profile. Changes to this profile will be lost when you log out.
I thank in advance for your suggestions.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
SRA-store outside the Active Directory user attributes
Is it possible to be able to store a custom user attribute, such as Mobile phone number, outside the Active Directory?
I would like to be able to use it on the the email (an email/SMS gateway) 2nd factor authentication process.
I would like to avoid duty or anything else in AD store or having to expose the unit to SonicWALL SRA.
It's something that we do now with our Barracuda SSLVPN device I'm looking to replace it with this.
You can configure a different email for OTP by user. In admin console click on users > local users. Change the user you want, and then click the tab linking strategies. Fill in the email address: field.
-
LDAP to Active Directory = 'invalid login credentials.
Hello
I am looking to set up Active Directory authentication in the APEX, so I'm changing the authentication to the LDAP directory service scheme
I finished the host, no port, NO SSL, etc. on the settings tab
Host: IP address of the ad server
Port: 389
Use SSL: No SSL
Distinguished Name (DN) string: domain\%LDAP_USER%
Just use the distinguished name (DN): Yes
However, when you try to run the application and entering my details it keeps bring "invalid identifiers.
What I missed
I came across the following code on another thread, but where would this go in the PL/SQL code?
DECLARE
vSession DBMS_LDAP.session;
vResult PLS_INTEGER;
BEGIN
DBMS_LDAP.use_exception: = TRUE;
vSession: = DBMS_LDAP.init
(host name = > 'CREDPWY01SDCG01')
portnum = > 389
);
vResult: = DBMS_LDAP.simple_bind_s
(ld = > vSession)
", dn = > ' CN = < user name >, dc = credit, dc = com"
, passwd = > NULL
);
DBMS_Output.put_line ('authenticated user!');
vResult: = DBMS_LDAP.unbind_s (vSession);
END;
I'm not able to authenticate at all when using apex_ldap without worrying if I pass NULL for the password, or use the real password.
BEGIN
IF APEX_LDAP.authenticate
(p_username = > "<>username")
, p_password = > NULL
", p_search_base = > ' dc = credit, dc = com"
, p_host = > 'CREDPWY01SDCG01 '.
p_port = > 389
)
THEN
DBMS_Output.put_line ('ok');
ON THE OTHER
DBMS_Output.put_line ('not ok');
END IF;
END;
Published by: Rambo79 on November 5, 2012 03:44It is one thing to AD configuration setting, which allows or prohibits the anonymous binds. It is not on the side of the apex. Try asking your AD administrator why this is so.
As you need a password anyway in your apex application, make sure that the password field is required / add validation, like suggested Christian. -
By integrating wireless deployment Active Directory User Group
I'm discovering best practices in deploying a WLAN for users in the environment to cooperate, who uses their company active directory integrated mobile to join the WLAN.
I know that this can be done easily using certificates, but I just want to find a way to deploy without certificates and only based on the users AD Group. Maybe a Radius Server + integration solution LDAP server would be great.
Please advice. Thank you.
See you soon
Lal Antony
The best way to deply is with a Microsoft Toolbox, it has everything you need included, manuals, scripts to install and configure components on the server side and it is very easy to use. You can get it here:
It is based on Win2003 Server but I was advised by MS should it be OK on Win2008.
Maybe you are looking for
-
I need to reset an old phone, but he has an old Apple ID that doesn't exist anymore
I have an old 5 iPhone and I want to reset it completely, but the problem is that the iPhone has a Apple that we changed the kind email ID pretty well there. Someone has any idea how to solve this problem?
-
It is one their recent. Worked well 4 days ago. for the last 3 days that I can go to Windows live (my e-mail account), I can connect, but that's all. When I click on my email, or any tab, tab nothing happens. I can go online with Windows Exployer and
-
Satellite P100-222 - graphic card crashed - alternatives?
Video card NVIDIA GeForce Go 7900 GS 512 MB broke down for my laptop Toshiba Satellite P100-222. I found the video card printed on this ID: DA0BD1U8AD9. I have searched to find this card on eBay or Google but could find based on reasonable prices.How
-
Input module of data acquisition can be read by two or more LabVIEW vi at the same time % 3F
I use the DAQ palette in LabVIEW to read the virtual channels of the input data acquisition module. I've done several VI who read many entries of three modules of simulations. The problem appears when I run two or more VI´s reading entries from the s
-
Download request "what file you want to open with.
I had a software auto update this morning. Since then, if I try to download something, he asks "what file you want to open with?" He has never done this before. I tried to download Skype and Firefox, since he has stopped working after the automatic