Change of certificate

Similar Questions

• Urgent: Not able to change the certificate in DPS app Builder

  Hello

  We are about to publish an application with the individual edition license. We did a version and then the customer discovered that the certificate must be changed.

  However, when we try to create the application, then fill in the information, there is no option to change the certificate - only configuration profiles.

  We tried searching high and low and you have not found a solution. In addition, the button Delete is grey is not possible to erase and start over.

  How can we change the certificate? The attached screen shows the screen after uploaded Prov. profiles, but there are certificate is checked while the CERT has not yet been added.

  BR,

  Mikkel

  

  Mikkel, you can only choose mobile configuration files. Once you click on create app it will generate the application.

  Once you click on the Finish button. It will give you two files developer.ipa and distribution.zip.

  When you download developer.ipa it will give you a different dialog box that ask you to select the developer & partner and developer .p12 certificate mobile service password file.

  Then click on the sign and download it. See attached screenshot:

  

• How to change the certificate watermark in Adobe Reader

  I need to change the watermark of signature of a document using a certificate, the default seal adobe logo.  I followed the instructions on the following link, which I pulled the relevant article of like the image below to save the time potential helpers. -> 4 appearances of personal - Signature guide digital for HER signature

  

  Everything was fine until they hit the location of the file in which the file SignatureLogo.pdf.  There is no such location of the file.  Or something like that.  I guess it's a difference between Acrobat and Reader.  Where I put this file for Adobe Reader?  I've already rooted through all files in C:-> Program Files-> Adobe-> Player 11.0 and go home empty-handed.  There is no security file.  I tried to create a folder called security in Reader 11.0 and place the file inside, it works no more.

  Search turned up nothing else than to unanswered questions.  I hope I have provided enough context information that mine will not the same thing, as a local jurisdiction requires that said watermark to change, and there are drawings for a project that cannot be made until this.

  The change can be done using only the free player.

• Change in certificate info?

  Hello, my email accounts have worked fine until this morning. When I opened my e-mail program (mail in mac os x) I get a certificate error. I'll try to attach the screenshot. Something was changing in catalyst for business? I'm a little nervous about accepting the certificate without knowing if it's ok. Any ideas?

  Annette

  Hey Annette,.

  Sorry I've been busy. Yes you can tell it to always trust.

• Change the certificate used by a Cisco 3850

  I have a new L3 3850 switch. He had a self-signed certificate installed when I first started the switch. The certificate is displayed either 512 or 1024 in length. I would like to create a key of 2048 in length. Can I issue the command generated rsa encryption key and specify the length of 2048 and I get a new cert. I can't just understand hw to make the new cert as the active cert.

  When he started it first, here is the configuration of the switch section:

  Crypto pki trustpoint TP-self-signed-127070658

  enrollment selfsigned

  name of the object cn = IOS - Self - signed - certificate - 127070658

  revocation checking no

  rsakeypair TP-self-signed-127070658

  !

  !

  TP-self-signed-127070658 crypto pki certificate chain

  certificate self-signed 01 nvram:IOS - Self-Sig #1.cer

  When I create new cert and validate them with the copy running-config startup-config and then recharge, it will show that the new cert is stored in NVRAM:private - config, but it does not show the cert when I cd in NVRAM: and issue the dir command. What is the right order to get the new cert to use.

  Here are the results of the dir command:

  2049 rw-1897 startup-config

  2050-3821 private-config

  2051 rw-1897 base-config

  1 0 rf_cold_starts

  2 cpu_trap.eci of - rw - 1079

  4 rw-1072 cpu_threshold_trap.eci

  6 - rw - 886 memory_trap.eci

  7 - rw - 858 rf_trap.eci

  8 rw-3123 wireless_trap.eci

  11 - rw - 270 ma_trap_keyword

  12-86 - persistent data

  14 - rw - 578 IOS-Self-Sig #1.cer

  -rw-0 15 ifIndex-table

  William Coats

  I was wondering how to do it myself, so I took him as a small project on our laboratory 3650. The documentation leaves to be desired, but I finally thought to it.

  1 generate a 2048 bit rsa key pair:

  seclab-3650 (config) #crypto generate keys rsa 2048 2048-bit-key module label

  2. create a trustpoint specifying registration self-signed and tell the TP to use this key pair

  seclab-3650 (config) #cry pki trustpoint 2048-bit-TP

  seclab-3650(ca-trustpoint) #enrollment selfsigned

  seclab-3650(ca-trustpoint) #usage - server ssl

  seclab-3650(ca-trustpoint) #on nvram:

  seclab-3650(ca-trustpoint) #rsakeypair 2048-bit-key

  seclab-3650(ca-trustpoint) #exit

  3 register the trustpoint - at this point the switch will generate the 2048-bit certificate.

  seclab-3650 (config) #crypto pki enroll 2048-bit-TP

  % Include the serial number of the router in the name of the topic? [Yes/No]: Yes

  % Include an IP address in the name of the topic? [None]:

  Generate a self signed certificate router? [Yes/No]: Yes

  Router self-signed certificate created successfully

  seclab-3650 (config) #.

  4. tell your ip http secure server to use this trustpoint

  seclab-3650 (config) #ip http secure-trustpoint 2048-bit-TP

  Once I did this, I can go to the switch via https and see the key of 2048 bits being used in the self-signed certificate. Click on the image below to enlarge:

  

• Need to change the ACE 4710 certificate that uses the https access management

  I would change the certificate in Cisco ACE 4710 that uses for managing https access to the device. We always get the notice of security from the GUI because it uses a self signed certificate for access to the administration. Please suggest there is any mechanisam or availabel for the procedure to change the self signed SSL certificate?

  Ranjith,

  You can check this bug:

  CSCte42757

  Jorge

• Certificate of Palm change tool

  I just bought a Centro to replace my aging Treo 700w (buttons were 2.5 years).  Wait for the pre or Treo Pro hit Verizon, so need something simple for a filler (I hope not liked a year - Verizon!)

  In any case, I need to install the security certificate personalized my company to be able to Exchange Active Sync.  From what I can tell, I need to use the change of certificate Palm tool to achieve this.  But I can not find the tool anywhere on the internet.  All links to the Palm site are broken right now.  I just got the phone to customer service and he said that he could be on the website in a week or two after I finished to upgrade the site - a week or two!  Come on Palm, get your act together.  I asked the guy if he could send me the tool, and he said he would check on it and immediately hung up on me.  What great customer service you have there.

  In any case, can someone point me to a place where I can download the certificate change tool.  If I have to wait two weeks for her, I'm picking up the phone and get one phone other than Palm Windows Mobile OS.  I hope someone can help me.  Thank you!!!

  Look here: http://forums.palmone.com/palm/board/message?board.id=support_downloads&message.id=7969 and scroll down to my post toward the end.  I hope this helps.

  Message relates to: Centro (Verizon)

• vCenter5 default change certificate

  Hello, we moved to vCenter Server Version 5 lately. The problem is, that when the VMware vSphere Profile-Driven Storage Service is started, he left shortly after. The event log shows: the service "VMware vSphere based storage Service profile" came out with the error: invalid function

  I found a KB article addressing this issue (http://kb.vmware.com/selfservice/microsites/search.do?cmd=displayKC & docType = kc & externalId = 2007824) with the exact error messages and the resolution in this article works fine. But I have to use a certificate issued by our CA rather than a self signed certificate.

  I already tried to create a new certificate, but the error persists.

  SPS.log:

  2012-01-03 10:55:06, 397 com.vmware.sps.util.impl.VpxdConnection [WrapperSimpleAppMain] ERROR - Unable to connect to vpxd
  com.vmware.vim.binding.vim.fault.NoClientCertificate:

  inherited from com.vmware.vim.binding.vim.fault.VimFault:

  inherited from com.vmware.vim.binding.vim.fault.NoClientCertificate: Client was clear, ohne ein Zertifikat bereitzustellen.
  at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
  at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
  at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
  at java.lang.reflect.Constructor.newInstance(Constructor.java:513)
  at java.lang.Class.newInstance0(Class.java:355)
  at java.lang.Class.newInstance(Class.java:308)
  at com.vmware.vim.vmomi.core.types.impl.ComplexTypeImpl.newInstance(ComplexTypeImpl.java:143)
  at com.vmware.vim.vmomi.core.types.impl.DefaultDataObjectFactory.newDataObject(DefaultDataObjectFactory.java:26)
  to com.vmware.vim.vmomi.core.soap.impl.unmarshaller.ComplexStackContext. < init > (ComplexStackContext.java:33)
  to com.vmware.vim.vmomi.core.soap.impl.unmarshaller.UnmarshallerImpl$ UnmarshallSoapFaultContext.parse (UnmarshallerImpl.java:135)
  to com.vmware.vim.vmomi.core.soap.impl.unmarshaller.UnmarshallerImpl$ UnmarshallSoapFaultContext.unmarshall (UnmarshallerImpl.java:98)
  at com.vmware.vim.vmomi.core.soap.impl.unmarshaller.UnmarshallerImpl.unmarshalSoapFault(UnmarshallerImpl.java:84)
  at com.vmware.vim.vmomi.client.common.impl.SoapFaultStackContext.setValue(SoapFaultStackContext.java:37)
  at com.vmware.vim.vmomi.client.common.impl.ResponseUnmarshaller.unmarshal(ResponseUnmarshaller.java:97)
  at com.vmware.vim.vmomi.client.common.impl.ResponseImpl.unmarshalResponse(ResponseImpl.java:243)
  at com.vmware.vim.vmomi.client.common.impl.ResponseImpl.setResponse(ResponseImpl.java:202)
  at com.vmware.vim.vmomi.client.http.impl.HttpExchange.run(HttpExchange.java:105)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.runTask (ThreadPoolExecutor.java:886)
  to java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:908)
  at java.lang.Thread.run(Thread.java:662)
  2012-01-03 10:55:06, 397 [WrapperSimpleAppMain] ERROR com.vmware.sps.StorageMain - politics of Storage Service could not be initialized: com.vmware.sps.fault.VpxdConnectionException: connection to vpxd failed

  Someone has an idea?

  EDIT: I also did a new install of vCenter 5 with exactly the same problem. This isn't a problem with the update.

  Has anyone of you successfully changed the certificate on vCenter 5?

  I could be misunderstanding the problem, but I found these instructions to replace the certificate:

  http://www.vstable.com/2011/12/14/replacing-vCenter-SSL-certificate-with-certificate-issued-by-Microsoft-certificate-authority/

  It seems to be an extra step for the v5, which wasn't necessary with the v4.

• Cisco ASA individual certificate for each interface possible?

  Hello

  My ASA actually AnyConnect VPN Client. I have set using ASDM.

  I need to assign a different certificate to my inner interface.
  Can I do this without changing the certificate on the external interface?

  If so, please tell me how this is done. My attempts have been allowed until now to the certificate on the external interface also being changed.

  Kind regards

  Go to Configuration > device management > advanced > settings SSL. There you should be able to choose the Interior of the interface and only associate a secondary certificate to this interface.

  You have to create (or import them from a certification authority) a new certificate already. (Configuration > device management > identity certificates > add)

• CERT ID on ASA change with impact session AnyConnect?

  Hello all - I should probably know this answer, however, I'm not 100%.

  If I change the cert ID (trust point) of the external interface to use a "most recent" certificate, although there are client AnyConnect connected, the session will end?

  I believe that the answer is Yes, since the keys will change.

  Any help is appreciated!

  Thank you!

  Hello

  He not disconnect users, because the main purpose of the use of cert in the first place other than identity is to distribute safe symmetric session key. Once this is done, the work of cert is done.

  I did a quick test on my end.

  I have connected a customer to the ASA using certificates. Here are the results:

  ASA-32-25 # sh run all the ssl
  SSL server-version everything
  client SSL version all
  SSL encryption, 3des-sha1-aes128-sha1 aes256-sha1 md5 - rc4-rc4-sha1
  Trust SSL SSL outdoors<-- this="" is="" the="" certificate="" applied="" on="" outside="">
  SSL certificate authentication CAF-timeout 2

  Now, I have connected my client and he got connected successfully:

  ASA-32-25 (config) # poster not vpn - its

  Session type: AnyConnect

  Username: anyconnect Index: 50
  Public IP address 192.168.10.2 assigned IP:: x.x.x.x
  Protocol: AnyConnect-Parent-Tunnel SSL
  License: AnyConnect Premium
  Encryption: AnyConnect-Parent: (1) no SSL Tunnel: 3DES (1)
  Hash: AnyConnect-Parent: (1) no SSL Tunnel: SHA1 (1)
  TX Bytes: 11488 bytes Rx: 1351
  Group Policy: Group GroupPolicy_Test Tunnel: Test
  Connect time: 12:24:15 EDT Thursday, April 17, 2014
  Time: 0 h: 00 m: 04 s
  Inactivity: 0 h: 00 m: 00s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no

  I removed then, the certificate for the external interface.

  ASA-32-25 (config) # points trust without ssl SSL outdoors

  And when I checked the status of the connected client, I saw that he was still logged:

  ASA-32-25 (config) # poster not vpn - its

  Session type: AnyConnect

  Username: anyconnect Index: 50
  Public IP address 192.168.10.2 assigned IP:: x.x.x.x
  Protocol: AnyConnect-Parent-Tunnel SSL
  License: AnyConnect Premium
  Encryption: AnyConnect-Parent: (1) no SSL Tunnel: 3DES (1)
  Hash: AnyConnect-Parent: (1) no SSL Tunnel: SHA1 (1)
  TX Bytes: 11488 bytes Rx: 1351
  Group Policy: Group GroupPolicy_Test Tunnel: Test
  Connect time: 12:24:15 EDT Thursday, April 17, 2014
  Time: 0 h: 00 m: 12s
  Inactivity: 0 h: 00 m: 00s
  Result of the NAC: unknown
  Map VLANS: VLAN n/a: no

  The conclusion therefore, is that users will not be cut if you change the certificate on the external interface.

  Hope that answers your question.

  Vishnu

• Configure SSL for OUD 4444 port Admin port-&gt; replace the self signed certificates used

  Hi Experts,

  When installing OUD choose Certification self-signed for ports 1636 and 4444.

  Later I change the certificates used by the port of 1636 to a new key file containing the CA certificates. (Track the steps of: https://docs.oracle.com/cd/E52734_01/oud/OUDAG/security_clients_severs.htm#OUDAG00050)

  But same procedure does not have to replace the self signed certificates used by ports 4444!  Everyone is configured SSL (with Cert CA) on the Administration port?

  I couldn't even start the servers, you see an error:

  """

  category = gravity CORE = NOTICE msgID = 458891 msg = the directory server sent a notification to alert generated by the class org.opends.server.core.DirectoryServer (org.opends.server.DirectoryServerShutdown alert type, alert ID 458893): the directory server started the shutdown process.  Stop was launched by an instance of the org.opends.server.core.DirectoryServer class and the reason for the closure was an error occurred trying to start the directory server: NullPointerException (File.java:277 AdministrationConnector.java:843 AdministrationConnector.java:675 AdministrationConnector.java:182 ConnectionHandlerConfigManager.java:356 DirectoryServer.java:2932 DirectoryServer.java:1584 DirectoryServer.java:10108)

  «[27/sep / 2015:06:22:53-0400] category = gravity = NOTICE msgID = 458955 msg = the directory server CORE is now stopped "«»

  Post edited by: 1976902

  Sorry, I cannot help here - here are a few possibilities.

  Change connector Administration certificate

  https://docs.Oracle.com/CD/E52668_01/E54669/HTML/ol7-genssc-auth.html

  The failure of the handshake could occur for various reasons:

  • Incompatible encryption suites in use by the client and the server. This would require the customer to use (or allow) a suite of encryption supported by the server.
  • Incompatible versions of SSL in use (the server can only accept TLS v1, while the client is capable of using SSL v3 only).
  • Incomplete trust for the certificate of the server path
  • The certificate is issued to another area.
  • incomplete certificate trust path between the certificate for the server, and a certification authority root.
  • In most cases, this is because the certificate is not present in the trust store

• FNMT certificate isn't valid in Adobe Reader

  When I get a PDF document signed with certificate FNMT (legal Spanish Fábrica Nacional de Moneda y Timbre) it appears as 'unknown' in the PDF document. FNMT changed this certificate two years ago, and with the old certificates, this does not happen. It happens with the new certificates. Old certificates are valid because they are in the trust list of the European Union (from Adobe server) but it is possible that the new format of certificate is not included in this list, and it may be the reason why it appears as 'unknown '. Is it possible that Adobe are a solution for this?

  Go to Edit - Preferences - Trust Manager and try to update all certificates (the Adobe approved ones, and the European Union has approved those) and then try again.

• Certificate of host is different from web registered certificate WILL

  Good day to all,

  I have a new installation of vRA 7 that has been installed with auto-signer certs and now when trying to replace all the self-signed with signed certs I got an error that I can't solve.  Tab approved of the coffee machine under manage IaaS component certificates I see the error "host remote servername certificate is different from the registered certificate Web GOES.

  The display name is the individual host and not the VIP that is displayed for the rest.  I imported, provided the digital footprint and generated new cert in a attempt to try to get the values to change, but so far neither matrix.  I think the value is defined in the postgres DB and who could not get updated with the change of certificate.  The certificate is for the IaaS Web.

  Someone at - it ideas how to update or possibly if needed update the database table.

  Someone at - he seen elsewhere and have a fix?

  Thank you

  Steve

  Hello sbeaver,.

  VRA 7 is a new feature that IAAS certificates can be registered automatically by the VAMI. This does work for me at all. When I imported the certificate into the VAMI, I got an error when he failed to change the binding of IIS. When I tried to give the impression he has failed and was told that the footprint is not found in the store.

  I found this post that helped me to realize that I had to do the old average vra 6.x Manual:

  replacement for the vRA certificate error 7

  Unfortunately, the link in this post documentation does not work for me. I used the documentation next blog post and vra for an example:

  Replacement certificates of IaaS vCAC 6.0-

  vRealize Automation 6.2 Documentation Center

  Kind regards

  Darrenoid

• Cannot access vCenter 6 licenses after the replacement of certificate

  Hi all

  Ive just replaced my vcenter 6 solution user certificates by using the Certificate Manager tool and computer. All seemed well, until when I unplugged my host in the cluster and when I try to reconnnect, brings me an error on my ssl certificate licensing, saying that my certificate in use is a less secure version lower than 3.

  I tried to access home > license option but the samr error jumped. Then I went to check the certificates that I used and found that they were indeed v1 certificates. However, the generation of the certificate request was made automatically by the tool. I don't have a choice to select the version used. Is this expected behavior? Or is there a way I can change the Certificate Manager to generate a v3 certificate requests? Or is it a totally different problem altogether.

  After a repair, we discovered that the admin of certificate uses the default settings and published the cert for us, which did not include the required extensions for a v3 cert. This caused the vcenter unable to access the license characteristics option.

  A resignation of the cert with additional extensions were made and has been used to replace the previous CERT using Certificate Manager. This solves our problem

• Technical Preview - certificate HTTPRest problem

  Hello

  I've updated the plugin 1.0.6 using vRO 6.0 HTTPRest.

  When I try to execute a workflow on a crowd of rest, im getting the error:

  Cannot execute the query:; host name in the certificate does not match: < IPADDRESS >! = < localhost >

  Where IPADDRESS is the ip address of the host im still contacting.

  I think that to understand what this error tells me. CN in the cert 'localhost '; and the IP address im trying to reach isn't in the CN/SAN cert. I can't change the certificate (its actually NSX), and it worked in previous revisions of the tool.

  Is it possible to ignore the name of certificate incompatibilities?

  Thank you

  We come to draft version of technical preview of the vCO REST plugin with an option to disable checking of the host.

  The option is available on the host level hollow add/update workflows.

  Technical preview of REST plugin version