Change of name of data store

Similar Questions

• Changed the name of data

  SUMIFS (data: $C, data: $B, $A2, given: $A, "> =" & B$ 1, data: $A, "<" & (EOMONTH(A1,0) will GET ($1.0 B) + 1))

  It's the formula that I used until I changed the names of "data Plan". The original names were:

  A1

  A6

  A12

  B1

  B6

  etc...

  I changed the plan of names...  I want to start all over again... The original formula still works?

  

  The original formula should still work as long as the new plan names are spelled the same in both tables.

  SG

• Change migrated VM, vmdk disk file name / reference data store

  Hi all

  I'm trying to migrate a large number of virtual machines between physical datacenters (using SAN as the migration of mirroring method).

  The problem I encountered is that the operating system and data vmdk is localized on different data for each virtual computer warehouses. When break us the mirror and enter the VMX to the new location, the VMX file is a reference to the old path to the VMDK files (ie: the old data store in the center of source data). Only the VMDK files located in the same folder as the VMX file appear correctly in the vSphere - other client appears with the size of '0 GB' - as vSphere can't find referenced vmdk files.

  I don't want to update the VMX files manually, of course that's why I'm here. :-) But I struggled to find a way to update the hard drive using PowerCLI vmdk file name.

  I have to resort to pure PowerShell and update the file vmx in this way?

  I read all the blogs on the updating of the vmx files - but they have all shown to day extension data "extraconfig". for example:

  http://blogs.VMware.com/vipowershell/2008/09/changing-VMX-fi.html

  This extraconfig does not include the lines in the VMX file that specify the vmdk file name. for example:

  scsi0:1.filename = ' / vmfs/volumes/abcdefgh-503544b2-e46c-d41234567890/myVmName/myVmName_1.vmdk '.

  Ideally, I would have liked to use the command set-hard drive - unfortunately this is actually trying to move the non-existent vmdk to the new data store that I specify - rather than just update the baseline data store.

  I hope someone here can tell me an effective solution - without having to read in the vmx files and edit them using PowerShell.

  Oh, and I wrote a script to print the list of VMDK files attached to each virtual machine (in the datacenter from source before you remove migrated VMs)- so I have my CSV entry ready for use with a viable solution.

  Any help much appreciated!

  Thank you

  FaTony

  If you have the list with the VMDK from the source, and you know how to translate those paths to the new location, you should be able to use the Remove-hard drive and the hard drive New cmdlets.

  Have you tried that?

• Is it possible to change the name of data acquisition device?

  Hi all

  Is it possible to change the name of device of data acquisition in a pragmatic way?

  I wish I had at the beginning, when I start the data acquisition control a name that my .net program assigns to the DAQ card. Is this possible?

  Thank you

  Virginia

  Ashly thanks!

  Virginia

• Fill the CSV file with the host name and the name of data store

  Hello

  How can include the hostname in my output csv file?

  The following code adds the name of the data store but not the host name:

  import-csv hosts | % {get-vmhost-name $_.name} | Get-Datastore. SELECT name.

  Export-csv ESX - Datastore.csv - notypeinformation - useculture

  How to watch your entry CSV file?

  If it's something like

  Name

  ESX1

  ESX2

  Do it like this

  &{foreach($esx in (Get-VMHost -Name (Import-Csv host.csv -UseCulture | Select -ExpandProperty Name))){    $esx | Get-Datastore |    Select @{N="VMHost";E={$esx.Name}},Name}} | Export-Csv report.csv -NoTypeInformation -UseCulture
  

• Change el en local data store storage limit

  Hola

  Tengo a servidor para instalar vsphere y quiero detect maquinas office in el local data store. Quiero saber como formatear el local datastore para I of mas soporte UN disco of 256 GB, I need por lo menos 1 TB.

  Saludos

  Hola

  I hope you guste esta imagen, porque so lo he present con el pdf

  Esta soon as I have that restore a 4 probing script en una verdad el.

  If esta u otra respuesta're util, por favor su marca used notificador.

  Gracias / looks

• function to change the names of data type members

  I was wondering if (TestStand 4.2) contains the ability to call all referrences to a Data Type member used in a sequence will be replaced by the new name if this member DataType is renamed in the MyTypes.ini file?

  The answer is no, and it's a difficult problem, if you speak code modules written in different programming languages different sources including files and always a problem semi-difficile if you're not because of the possibility of lookupstrings appearing in places unusual or used in an unusual way.

  However, there are 2 features that exist in TestStand 4.2 which should help with this.

  (1) search/replace in files - if the old name is quite unique, it should be easy, if it is not then maybe with a clever use of regular expressions in the search string, it should still be feasible.

  (Monitor 2) - this should help you find the places that need fixing or you might have missed to make 1) above.

  Hope this helps,

  -Doug

• Names of data store

  Hi all

  I was wondering how data warehouses and the virtual machines are managed in huge datacenters/multiple data centers managed by the same company. What are the different naming conventions people commonly use. Lets say, I'm a company that has three data centers across the world, what are the chances of having conflicts between virtual machines / data warehouses on the names data centers?

  To be fair, what I posted is a pretty standard representation and is portable across different services. Some companies might not worry really less until they run in trouble.

  The most important thing is the standardization through the opportunity, IE networks understand what means your standard match to thiers, or that they actually use the same standards, it goes the same for storage teams.  This is where most confusion occurs.  as nothing is more frustrating then knowing where it is, but the team it takes to solve it have no idea where you're talking about, so you start looking for a COP out or find naa. # numbers for team SAN.

  Standards in a society are important.

  Pick one and stick to it and try to agree on a global scale through displines.  That said, the storage and network teams tend to be historically more standards driven and you can see that their system is one that is necessary.

• CHANGE OF NAME OF DATA FILE

  Hi all
  We use the database to Oracle 10 g Enterprise Edition Release 10.2.0.3.0 - 64 bit on Solaris 10.
  I ran out of space in one of the mounting points of the and when I checked al the files were of oracle data files.
  then I thought moving datafile and rename it.
  Here are the steps that I followed and the thrown error...
  
  (1) stop of the database
  (2) cp /u02/oradata/DWH/temp01.dbf /u01/oradata/DWH/temp01.dbf
  (3) startup nomount
  (4) modify the database editing
  (5) change the database file rename ' / u02/oradata/DWH/users01.dbf' to ' / u01/oradata/DWH/temp01.dbf';
  
  Database altered.
  
  (6) alter database open;
  change the database open
  *
  ERROR on line 1:
  ORA-01122: database file 4 failed verification check
  ORA-01110: data file 4: ' / u01/oradata/DWH/temp01.dbf'
  ORA-01251: unknown file header Version from the record 4
  
  
  When I make the mistake...
  
  
  Thanks in advance
  Jazz

  You have renamed the wrong file, you copied temporary users then renamed:

  alter database rename file '/u02/oradata/DWH/users01.dbf' to '/u01/oradata/DWH/temp01.dbf';
  

  Besides, with TEMP you could have just recreated instead of having to stop the database and to have a failure.

  Published by: Stellios on May 20, 2009 16:19

• Change the name of a data store?

  Hello

  Is it possible to change the display name of a data store NFS I have 8 nodes in a cluster connected to?  This is for aesthetic reasons only - consistency of the naming convention.  Just curious, if I renamed the store of data for data store in vSphere VCenter, did change the display name for each host?  Or I have to change the display name to each host using the "hosts and Clusters".  Just curious to know if I can do that, while virtual machines are run with no negative effect... or should I stop literally all of the virtual machines to do this.

  Thanks in advance.

  Hello

  You can change the name of data warehouses (NFS, iSCSI, FC etc.) at any time and without any negative effects.

  Just right click, rename it to your heart's content!

  See you soon,.

• get the names of Get-ScsiLun data store

  Im stuck here...  Can anyone help me to get the names of data store for storage devices using the script below? My requirement is to get the naa (ConsoleDeviceName) address and the names of data store for each storage device.

  $esxName = "esxsrv1".

  $report = @)

  Get-ScsiLun - VmHost $esxName - LunType "disk". %{

  $row = "" | Select the host, ConsoleDeviceName, model, provider

  $row.host = $esxName

  $row. ConsoleDeviceName = $_. ConsoleDeviceName

  $row.vendor = $_. Name of the vendor

  $row.model = $_. Model

  $report += $row

  }

  $report | Export Csv c:\Temp\results.csv - NoTypeInformation

  Thank you very much, Kev - o

  Try it like this

  $esxName = "esxsrv1"
  
  $dsTab = @{}
  foreach($ds in (Get-Datastore -VMHost $esxName | where {$_.Type -eq "vmfs"})){
      $ds.Extensiondata.Info.Vmfs.Extent | %{
          $dsTab[$_.DiskName] = $ds.Name
      }
  }
  
  $report = @()
  Get-ScsiLun -VmHost $esxName -LunType "disk" | %{
  
      $row = "" | Select Host, ConsoleDeviceName, Vendor, Model, Datastore    $row.host = $esxName    $row.ConsoleDeviceName = $_.ConsoleDeviceName
      $row.vendor = $_.Vendor
      $row.model = $_.Model
      $row.Datastore = &{
          if($dsTab.ContainsKey($_.CanonicalName)){
              $dsTab[$_.CanonicalName]
          }
      }
      $report += $row}
  
  $report |Export-Csv c:\Temp\results.csv -NoTypeInformation
  

  The script begins by creating a hash table where he maps the CanonicalName with the DatastoreName.

  In the 2nd part of the script of the hash table is used to find the DatastoreName through the CanonicalName.

• Machines MSCS with RDM, how to change the data store?

  
  Hello world

  I'm having a problem of displacement of 2 machines with RDM disks.
  We have 2 guests ESxi 4.1 with virtualcenter, but no license for vmotion.

  This 2 machines is building a MSCS Cluster (Microsoft) (file server) with multiple disks (5) RDM,
  for a total area of 8.9 TB. Of course, for use with MS cluster, the WDR is with physical compatibility.

  The problem is that the local vmdk (and also rdm.vmdk files) for these 2 machines are on the local data store (a machine for each host) and I need to move them to the shared storage. But if I power off of a computer and trying to change with the ROW data store attached, I get an error because the VMFS of the commune dastore (block size = 1 MB) does not support these large files (up to 2 TB).

  I read a lot of articles
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1031041
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1026256
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1002511
  and a few other discussions of communities.

  In accordance with article
  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1005241

  I tried to turn off the machine, remove the RDM, migrate to another data store, and then reconnect the RDM.
  There is a big problem with the last point, because I don't know how readd the RDM manually (vmfsktools?).
  I want to add an existing drive, but he was in local storage, and I don't want more no reference to the file in the local storage...
  According to the documentation of vmware for MSCS, the second node of the cluster disks can be added simply to add a drive existing and selecting the
  existing node. If it is no problem of shared storage, but the host cannot read local storage to another host...

  Any suggestion to migrate a computer virtual with RDM shared storage room? Thank you

  E' possibile disabilitare he LUN filtering per vedere UN RDM gia awarded:

  http://www.yellow-bricks.com/2010/08/11/storage-filters/

  Option da diabilitare temporaneamente in vCenter config.vpxd.filter.rdmFilter

  Andrea

• Renamed after failback data store

  I use a SAN 3PAR and after failing with MRS 4.1 for the protected site of origin the data store used by SRM, which was named "ESX_LUN_4" before the restoration, is now named "snap-171a27e9-ESX_LUN_4" on the ESX servers.  However, the name of logic on the SAN unit number still seems to be the original name "ESX_LUN_4".

  Can someone tell me how to restore the name of data store for one, original ESX_LUN_4?  I can just rename it or who will create more problems?  I tried a new analysis of the storage, but the data store name remained the same.

  Thank you.

  V.

  This is an expected behavior. Given that ESX detects the store of data replicated as a snapshot, in order to mount it, the volume must be resigned. Name of the resigned from the data store begins with the word "snap". You can rename it back without any problem.

  You can also configure SRM to rename the data automatically store. This is done by setting the parameter called SanProvider.fixRecoveredDatastores in the advanced settings of MRS, (located in the SAN provider section). The SRM service restart is required after the change.

  Good luck.

  Michael.

• How can I change the name of the ion HD my Time Capsule airport

  My time capsule airport has changed its name to data and now I can't use it. What can I do?

  Not sure why you can't use 'Data' as the name of the disk hard Time Capsule, since it is the default value.

  But, if you want to change the name of 'Data' to something else...

  Open the AirPort on your Mac utility... (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click the disks at the top of the next window

  Next to Partitions, you will see "Data".

  Click directly on the name of 'Data' and the box will change to allow you to edit the name, just as you can change the name of any other player

  In the example below, I changed the name of the drive 'safeguards '.

  Click Update at the bottom right of the window to save the changes you have made

  

• How do I cancel the mapping of a data store of esxi host without data loss

  Dear team,

  I want to cancel a data store that is mapped on two cluster mapping (cluster1 10 esxi host and cluster2 esxi 4 guests)

  
  

  
  

  Query1

  What step will be OK

  Disassemble = > detach = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > join = > mounting

  or

  Disassemble = > detach = > team san will cancel the mapping = > start the activity of storage (storage poweroff) movement = > move the storage = > poweron = > san team will map the data store = > join = > mount

  Query2:

  Once I sail, I am able to see vpshere ha and dvs folder data, I just want to confirm if I want to take it apart and to separate the data store it will allow me to do it or it will throw an error, please confirm.

  Query3:

  If we remove and detach a data store, before that I have to cancel the registration of all the virtual machines?

  
  

  
  

  concerning

  Mr. Vmware

  Please find the right measures

  Query1

  
  

  before the take-off of export activity VM that are stored on the data store

  
  

  Home-online store of data and the data cluster store => select the data-VMs online store => add all columns => take export VM

  
  

  take the last export RVTool.

  
  

  
  stop all VMs-online you unsubscribe from all models and virtual computers-online RK on Cluster (change the setting-online data store-online here hearbeating we have to choose another data store and click OK)

  
  

  to confirm the new data store is visible as heartbeat data store select Cluster-online Sumamry-online state Custer-online Heartbeat Datastore)

  If we are able to see the new data store, then now remove old data from the heart rate data store store

  
  

  RK on Cluster (change the setting-online data store-online here hearbeating he have to uncheck the data store and click OK)
  

  
  

  disassemble => detach (you will need to perform this step on all esxi hosts)-online san team will be unmap-online beginning of movement storage (storage poweroff) => move the storage-online poweron-online san team will map the data-attach online store ((need to perform this step on all esxi hosts) => set up the data store)

  
  

  Register for all virtual machines

  
  

  PowerOn all VMs if get message (moved or copied) select moved.

  
  

  Query2:

  He doesn't throw any errors, will work flawless.

  
  

  Query3:

  Yes we must cancel the registration of all models and virtual computers before disassembling a data store.

  
  

  concerning

  Mr. VMware