Change the Image based on the line of dashboard

Similar Questions

• Help needed Illustrator - apparently is no longer able to change the line color of the open/closed contours.

  Hi, I'm new (very) to Illustrator so please go easy. I'm in a bit of a pickle and would very much help to get out!

  I created an illustration using the pen tool, making a series of paths open and closed (below), all stroked them in the color purple. I then used the Shapebuilder Ranger a few areas of intersection.

  Later, I started using live paint to color block the form contained in the paths, however, when I try to change the outline of these 'forms' that won't happen.

  I tried releasing the images of live paint and changing the line color of the sketch (i.e. opening and closing original tracks), but this does not work either.

  Any advice?

  Thanks in advance,

  Will be

  

  Inside a live paint group you must activate the coloring of the traits.

  To do this, double-click the live paint tool.

  When you expand a live paint group, fills and strokes is separated. You get a group that has all the traits and another which has fillings.

  You will need to inspect it in the layers panel, and then select the Group of traits in order to change.

• APEX do not allow to change the lines of the columns that are the primary key?

  I have pictures:
  http://img508.imageshack.us/my.php?image=21269582oe8.jpg
  
  
  Book (id_book - 'Primary key', title, year); book_author (id_author id_book - 'Primary key', - 'Primary key'); author (id_author - "Primary key", name)
  
  
  
  I created a new page-> Form-> form of 'author' table because I want to add new authors, modification and deletion. During the creation of this page, I have chosen column 'id_author' as '1 primary key column' and everything is OK (I can't edit the 'id_author' column - this column is autoincrement and I can change the 'name' column).
  
  BUT I also created a new page-> Form-> table for table "book_author" because I like to write numbers like id_book and id_author, change and remove them (so add relations between tables: book, book_author and author). During the creation of this page, I have chosen column 'id_book' as '1 primary key column' and 'id_author' as 'column primary key 2'. And on the Web site, I can't edit these fields. And I can not add also new line because I see in each new line: (null).
  
  http://img444.imageshack.us/my.php?image=11324615yk9.jpg
  
  APEX do not allow to change the lines of the columns that are the primary key? It's stupid... What can I do?
  
  Edited by: user10731158 2008-12-20 11:40

  Column unique and not meaningful if you ever want to update. In the case of your example, you need to add an ID column in the intersection of book_author table. Honestly, I was so blown away (and pleasantly surprised) by the absence of rebuttal and the "thx" I advanced and set up an example of how I would define the book_author table:

  create table  book_author
     (id varchar2(32),
      book_id varchar2(32),
       author_id varchar2(32),
       modified_on     date,
       modified_by varchar2(255),
       constraint book_author_pk primary key (id),
       constraint book_auth_book_fk foreign key (book_id) references books(id),
       constraint book_auth_author_fk foreign key (author_id) references authors(id)
       )
  /
  
  create unique index book_author_uq on book_author (book_id,author_id)
  /
  
  create or replace trigger  biu_book_author before insert or update on book_author
  for each row
  begin
       if inserting then
            :new.id := sys_guid();
       end if;
       modified_on := sysdate;
       modified_by := nvl(v('APP_USER'),user);
  end;
  /
  

  Good luck
  Tyler

• How can I change the line spacing?

  I looked everywhere to find how I can change the line spacing in my e-mail address when sending. Can't find any dishes. CAM help me?

  The answer is probably some handmade css coding which is not a trivial thing to do.

  Why you want to change the line spacing? A larger or smaller font would be useful for you?

• Change the line spacing in wordpad

  HOW CAN I CHANGE THE LINE SPACING?

  Hello

  I would like to know some information about the problem so that we can help you better.

  You want to set the default spacing in WordPad?

  Thank you for your query details.

  I also appreciate the fact that you want to change line spacing in WordPad.

  Please see suggestions from Steve Cochran and ptsome110 responded on July 21, 2010 and also Steve Winograd said on July 17, 2010.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/how-to-change-WordPad-line-spacing/328d127b-6bb3-4DF3-abbf-fb840f888b19

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Change the line key notify labels via sip

  Hi, I was wondering if anyone knew if the following text was possible. Is it possible to change any part of the config of the series phone Cisco SPA via a SIP notify or similar method. I have an asterisk server, where we have created a system to move a device for extensions without requiring a reconfiguration/reset (in the most anticipated cases for the function, the new phones or complete swaps may or may not require commissioning). The problem with this so that when you move Extension A of device 1 device 2, clearly labels don't update unless you change the configuration via the web gui or commissioning.

  I was looking for a way to change the line key labels without having to reboot via a SIP notify message similar to how you can tell a SPA phone to resync notify its config via sip.

  Research on google seems not to show many results, so I tend to think that's not likely to be possible. So I asked here as one of the last resorts before the redesign on the part of the idea.

  The web GUI is not an option for me due to some phones may be behind various firewalls, proxy or the webgui unaccessable.

  Thanks in advance

  Avoid you SIP inform as well as changing the configuration. But the buttons on the phone are mislabeled.

  I call it serious bug, you have no system for deployment.

  But it seems that you accept such behavior as characteristic of the system that you designed.

  It's your system - your opinion is decisive.

• How can I change the line spacing of the double to single spacing between lines when you use Wordpad in Windows 8?

  How can I change spacing of double room to single space?

  I tried.  I changed the line spacing of 1.5 to 1, but it made no difference.  I also highlighted the text and hold the Ctrl and 1 keys at the same time, as suggested elsewhere.  None of these things worked.  My laptop runs Windows 8 operating system.  What now?

• What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Mr President.

  What is this error represents "another user has changed the line containing oracle.jbo.Key [21 primary key]."

  Concerning

  You get this exception quite often when you have a business in PL SQL layer, but you can safely ignore (suppress) it by substituting the lock() method in all implementation of your entity classes.

  /*** customizing locking management: 
  * Because attribute values can change 'outside' ADF standard life cycle, 
  * when optimistic locking executes, the exception "Another User Changed the Row" is thrown. 
  * In this case, we execute locking again, ignoring the exception 
  */ 
  public void lock() 
  { 
   try 
   { 
    super.lock(); 
   } catch (oracle.jbo.RowInconsistentException e) 
   { 
    if (e.getErrorCode().equals("25014")) 
    { 
    super.lock(); 
    } 
    else throw e; 
   } 
  }
  

• A statement UPDATE changes the line if the update changes the column even value?

  HI -.

  I have a main classification and the corresponding audit table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time. He is not able to determine that the value is the same.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  Best regards

  I have a main Table and the corresponding Audit Table. I have a trigger. I created using the suggestion:http://www.runningoracle.com/product_info.php?products_id=211

  Why?

  You try to resolve what made you what are the PROBLEM that select as the solution?

  Now the problem that I am facing is that: if I run the same query (same value) update on the main table for n times (with the same data)... my audit table is updated with a new record every time.

  Yes - it is EXACTLY what you say that you wanted to do and EXACTLY what the code does in this article.

  He is not able to determine that the value is the same.

  I think you mean that the code does NOT check if the value is the same. You can certainly change the code to do this check. But I have a question to start with your need for such a solution.

  My goal is to load the audit table data if the value in a cell in the main table is really have changed.

  OK - then modify the code to check EACH COLUMN and compare its NEW value to the OLD value and insert only the table of audit if SOME (or columns you care specifically) have changed.

  A statement UPDATE changes the line if the update changes the column even value?

  It depends on what you mean by 'change the line '. Of course to update a column with the SAME value does not change the resulting data value.

  But the physical structure of the line, the location of the pieces of line and information in the header block (YVERT, etc.) will change. And, as others have said Oracle doesn't know and doesn't care, so if the new value of a column is the same as the old value will create redo, undo and the rest.

  Start over and tell us what PROBLEM you're trying to solve. Then we can help you find the best way to solve it.

• How to change the lines in the interactive report?

  I want to change the lines in interactive reports before and after filtration. I added "edit_link in SQL and the column in the region but settings I don't know how to load data into the page with form created for editing data in line.

  There are examples in the sample applications, but the steps are.

  Create a new page which, with the right ID available, select the database details and allow you to edit the details and save them in return. A positive result of the Save (or cancel) arange the page with a branch back to your interactive report.

  On your interactive report, for your chosen link column, set it to branch to the page you created above and set the item of page ID on the page to the value of the ID in your crrent folder.  Selection lists will help here.

  Now, by clicking on your link edit show open the new page and select the details of the database preparation n for any update, you choose to make and record.

  Stewart

• change the line style for cell None

  Hi expert,

  How to change the line style for cell to zero.

  Respect of

  John

  my_cell.topEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.leftEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.bottomEdgeStrokeColor = app.activeDocument.swatches.item("None");
  my_cell.rightEdgeStrokeColor = app.activeDocument.swatches.item("None");
  

  Do not test, but should work.

• How to change the line width of underline and color (on my MacBook or iPad)

  When you use my MacBook or iPad, how can I change the line width and color when you use the underline tool or the pencil tool?

  Hi Backpacker48,

  .. using the underline tool or the pencil tool

  I'm fairly certain that you may have about the comment tools.

  To highlight the tool, there is no option to change the line width (thickness).  But you can change the color and opacity.  In addition, you can change the style in the desktop application.

  For the Pencil tools or drawing freehand, you pouvez change the width of the line (thickness) in addition to the color and opacity.

  The key here is to change the properties of an existing comment, once it is added to a page.

  Acrobat Reader DC (desktop application) on your MacBook

  1. Right click on the brand of underscore or existing pencil.
  2. Select properties from the context menu.
  3. Select appearance (if not already displayed).
  4. Specify the value of a property (color, opacity, Style or thickness).

  

  

  Acrobat Reader for iOS (mobile application) on your iPad

  1. Tap the existing underlining or drawing freehand.
  2. Select a property (color, opacity, thickness) in the menu that appears.
  3. Specify the value of the property.

  

  

  Once you change a property (for example, thickness, color, opacity), the mobile app will remember the new value of type specific comment for next time.

  Please let us know if you have any additional questions.

• I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously, I had started to put these in Lightroom but decided to change the line

  I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously I had successfully started putting these in Lightroom, but decided to change the format of deposit and deleted (I think) all these previous efforts of Lightroom. On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  Robert alanb48311052 says:

  On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  The Destination Panel does not appear? Try right click on one of the other names of Panel on the right side of the import dialog box and select Destination.

• Change the lines button image

  Hello

  I want to know if there is an easy way to DW to change the default button, the browser will display for the button 'Browse' when I use an input field:

  for example using:

  < input type = "file" name = "fileatt" >

  I looked at this link, but not only that it has not worked for me, but I also want to know if there is a simpler method.

  http://www.quirksmode.org/DOM/inputfile.html

  The big drawback for the javascript code is that it requires the support of the W3C DOM, and even in my test environment, I was not able to see the work.  I think that the HTML only (well, there is javascript used to stuff the path traversed in the input field) will be satisfactory to your visitors using modern browsers reasonably.

• Script to change the line style in a graph report

  Hi all

  Is it possible to automate the formatting of (linestyle) of a plot of graph in a report?

  friend,

  Ben

  This code accesses a system of axis line style:

  Call GraphObjOpen("2D-Axis1")
  
    Call GraphObjOpen("2D-Axis1_Curve1")
  
      D2CurveLineType  = "solid".
  
    Call GraphObjClose("2D-Axis1_Curve1")
  
  Call GraphObjClose("2D-Axis1")

  Please note that you must know the name of the Axis system and the curve you want to change and use the correct names in the GraphObj... commands.

  The best way to find these commands is via the function Ctrl-A in tiara.

  Valid entries for D2CurveLineType are:

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  End of script	Terms of interface, explanation
  solid	Line
  Dashboard & dott.	Points and dashes
  1 dotted	Dashes 1
  2 dotted	2 dashes
  dotted line	Dotted line

  I hope this helps.

  Otmar