Change the language in real-time on multiple PDFs

Similar Questions

• change the properties in real time

  Is this possible?

  I have a digital command and a loop for. I would like to change the propertis of num control so that it increments as the Terminal counter, i.e. control number is a multiple of the meter. The user can run the loop for x times those and another times y times. Digital control are editable as it is a multiple of the value?

  Thank you.

  Yes, you can change these properties at run time (real-time is something different).

  Right-click on the control terminal, select Create-> property-> data-> incremententry limits.

  Good luck.

  tone

• Control of data using multiple thermocouples via indicators and the waveform in real-time

  I apologize in advance for this question is probably a bit simple but I'm all new to labview and the forum and could use some advice. I have a CompaqDAQ with two 9213 16 modules of track and I'm trying to read in 30 thermocouples in a waveform, but also display 30 indicators so I can mark each indicator with the thermocouple for real-time tracking. Each thermocouple corresponds to a specific location and it is essential that the interface has an accurate indication or a label for each of them. I wonder if there is an easy way to do this in addition to split the signal and have 30 thermometers on my diagram? Perhaps a table any? If I use a table to create 30 thermometers, the DAQ assistant automatically sorts the thermocouples according to ascending numerical order. For example, would be the indicators of first and second on my interface automatically assigned to channels a0 and a1 of the first module, or should I do it manually? Even for the waveform?  Thank you very much!

  PS - Do not know if this message had need of more details, but let me know if more information is needed, and I'll give you!

  I see that you use the DAQ Assistant to create your task.  Now I understand why you may have about labelling.  It is easy of the seller NOR spiel booting...  But in any case, you already have a task to the MAX instead of use the DAQ Assistant?  The interface is similar and there may be a step or two, but your end application will be more effective and you will have more options with your data and properties.  For example, I tried to update the names of physical channel in the DAQ Assistant installation program, that it let you do, but it propagates that change forward to waveform chart legend.  Also, I don't know any property for this dynamic data type node, although I never use it either.  I suggest the setting up of your task and channels, Max if you'd give it a go.

  Since I thought I didn't really takes you all the way with you help, I wrote another one.  It uses a cluster, even if it's a bit barbaric.  I thought that there was a more eloquent way to do by changing labels, but I could not it works as I had expected.

• Change the language of the browse time button

  Hello. How can I change the language of the browse time button. For example,.

  

  I want to change the caption of a button 'Set time to Now', 'time '? Is this possible?

  Thanx.

  The dialog box is a VI that is part of the LabVIEW package.

  You can make a copy of this VI and change the text of the button you want.

  Search for picktime.vi in your \resource\dialog\ of your LabVIEW installation subdirectory.

• How can I get updates in real time in multiple views when scrubbing through the timeline?

  I use After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll the timeline, a real-time updated view, it's great! If I open a second point of view, it does update this notice when I finished the scrolling.

  I would like to be able to scroll back the timeline and update in real-time (live update) has two different compositions?

  Is this possible?

  Thank you!

  The long answer is: No. it isn't even a matter of performance, this is how AE evaluates the time, because the time is fluid and can be truncated to 1 million ways to time remapping to expressions...

  Mylenium

• Is it possible to change the language of my computer. From Spanish to English. It's a sony vaio with Windows XP

  It's a sony vaio pcv-w200m. Sold only in Latin America. Bought one and it would be so easy to change the language. Just need to know if I have any hope to convert the language from Spanish to English?

  Hello

  If you have installed Windows XP on your computer and you are using the Spanish version, you can change the operating system to accept the entries of the language of other languages supported, such as English. This will help enter you commands and text in languages other than Spanish, making it easier to use the operating system in your native language.

  (a) click on 'start '. Select the "Control Panel", and then open the section ' Date, time, language and Regional Options ".

  (b) click on the button "Add other languages", click the "Languages" tab and then click on the button "Details".

  (c) change the setting from "Default input language" in English, and then click the OK"" button.

  (d) computer and changing the settings is applied to the computer.

  You can read this article and check if it helps:

  Configure Windows XP for multiple languages

  http://Windows.Microsoft.com/en-CA/Windows-XP/help/setup/set-up-multiple-languages-Windows-XP

  Click on the link below.

  List of languages supported in Windows 2000, Windows XP and Windows Server 2003

  http://support.Microsoft.com/kb/292246

  If you have no English language installed on the system, then you can get a Windows XP MUI pack, if you ask on a new computer from the original manufacturer

  User Interface (MUI) packs for Windows XP Multilingual, offering fully translated versions of Windows in 24 languages, are only available for download or for sale to companies that are part of a volume license program or who have select and company agreements. I suggest you to take a look at the article mentioned below.

  http://Windows.Microsoft.com/en-us/Windows/downloads/languages-XP

• I want to hang the Tower up to my big screen and instead of using a keyboard, I bind a tablet that I can use as a keyboard and to manipulate objects on the screen in real time

  I am in the middle of do a remodeling and think about a furture upgrade my PC at home, I want to hang the Tower up to my big screen and instead of using a keyboard, I want to connect a tablet that I can use as a keyboard and to manipulate objects on the screen in real time. Is there a way to do this?

  (1) before the PC upgrade, please read the complete technical documents for all devices

  you want to go to upgrade

  (2) it is the first thing to do to make complete lists of materials you want to change.

  Compare specifications detaily, note important diference between many of the same features

  (3) for more information on some devices and materials, see link below

  http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/home?language=en-us

• iPad smart keyboard does not change the language after updating iOS 10

  Smart keyboard on the iPad (in English) does not change after updating to iOS 10, put in language. He's stuck in English. Pressing on the globe (change language button) displays the language menu, but after selecting the language, the keyboard is still in English.

  I have reset all settings. Erase all keyboards, adding them again.

  Any ideas? Does anyone have the same problem?

  Howdy, rapretzan! Thank you for using the Apple support community!

  Great work to solve your problem until now! Apparently to reset all the settings and erasing/re-adding keyboards for iPad Pro still isn't allowing you to change the language since the upgrade to iOS 10. I'll be happy to help you.

  How to back up your iPhone, iPad and iPod touch - in order to get your keyboard working properly, I'll have reinstall you the iOS. Please backup your personal data to keep it safe.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings - you will need to use iTunes on a computer to clear completely your iPad you can install a new copy.

  The first time, select "Set up as new iPad" and ignore connecting them to iTunes and App Store and iCloud. See if you are able to get back with your Smart keyboard languages. If you are, go to the next step.

  Restore your iPhone, iPad or iPod touch from a backup - use this article to guide you through the steps to send your personal information to your iPad Pro.

  Have a great weekend!

• How do I change the language displayed, for example at the top of my page, my file option is now spelled Bestand, Edit is Bewerken etc. I'd like to go back to English

  I tried to change the language using Extra (Tools), but that didn't work. Also, I can't read what the options are.

  This has happened

  Each time Firefox opened

  Is a week ago

  Hello Tony.

  You must download the version you want (see this this page for all systems and languages), uninstall the one you have (no data is lost) and install the version that you just downloaded. You can choose not to uninstall your current version and just install the new version in a different location, but who can create a mess for inexperienced users.

• How can I change the language of the operating system Vista in English

  Anyone know if it is possible to change the language in Vista Home Premium, or if it is possible to download a language. I have a laptop that I bought in Spain and thought that I would be able to change the language to Englaish, but unfortunately it doesn't seem to be the case.

  I thought it was that a good deal at the time would be be a costly mistake - although I am really happy with the laptop Toshiba, the language causes me problems.

  Any help would be appreciated. Thank you

  Hello

  Do you want all Windows Vista in English? Well, what to say to my knowledge, you cannot simply pass the language of the OS.
  It of only possible to turn the regional and language options for keyboard or the date and time.
  But it's not possible to change all writings, menus or titles of the BONES.

  In this case, you will need to buy an English version of the Vista operating system and install again!

  By the way; Vista offers the function of Windows Vista multilingual user interface but I didn t test m and I do not know if this will change the language on the image of Toshiba Vista not 100%.

• How can I change the language of my ideapad Black 10

  Hello. When I was installing my ideapad Black 10 to select a region and language, I typed by mistake and he was put to the Japanese. How can I change the language from Japanese to English.

  Another solution is:
  1. open Charms bar (Windows key + C)
  2. Select "settings".
  3. choose 'change PC settings. "
  4. in the left menu, choose "time and language.
  5. screenshot:

  

  Now you have two ways to do this!

• How can I change the language setting for 4500 WANT after the initial Setup

  The language setting for the ENVY 4500 e-all-in-one printer has been mistakenly or inadvertently put in CHINESE (not sure how this can happen).  Now, the display is incomprehensible, so I can not understand how to change the language to ENGLISH.  Is there a simple way to change the language or reset the printer by default so that I can fix this problem?

  Thank you.

  Hi scfessler,

  Welcome to the HP Forums.

  I see you have a problem with the printer displayed in another language.

  On the front screen of the printer, press the top left button ( Home button).  Once on the home screen, press the arrow UP 2 times, this brings you to the preferences Menu, press OK.  Once in the Preferences menu, the first highlighted area is the enacted area please just press OK again.  The first language highlight is English, please press OK and then Yes to make the changes.

  If you still have questions, please let me know.

  Thanks for your time.

  See you soon,.

• Able user to zoom in/out the image in real time the performance of façade?

  Well I have searched this and have developed empty. What I would do, is to have a picture of a diagram on the front panel and during execution of the VI user can somehow zoom in/out the image in real time.

  I know there is something that is called Zoomfactor that you instantiate a way in the block diagram, but that seems to zoom in on a picture of race prior to the program. The zoom is not in real time. There is no possibility of real user to zoom in/out with free will, using the Zoomfactor I see. (Sorry I forgot display name of the service). And I saw messages by a man named George Zou that seems to come with a VI which is closest to what I want, but I pulled the VI site seems not compatible with my computer (my rig is under XP with Labview 2013 currently). So, I was wondering if someone else had found other answers appropriate to my specifications?

  Use a structure of the event to change magnification during execution.

  You can even program your own shortcuts to the structure of the event, for example if the user clicks on a particular point on the picture and you read this coordinate on, and you zoom way at this point remains in the Center... There are many options to play with...

• All-in-one Compaq Elite 8300: change the language of the printer

  I use this computer with an OfficeJet Pro 8500 a909 (USB connection). I'm in Switzerland and use E nglish on a Swiss German keyboard. I would like to have the center of HP solutions in English, but I can never manage it. And I get this message:

  Die Druckersprache nicht stimmt mit der auf dem Computer eingestellten Sprache verzeichnen.

  (printing language does not match the computer).

  I have tried everything I can think of to change that, but failed every time - downloads in German printing software every time, even on HP British and American sites. This, clearly, is the computer. Any ideas how to deter? Changing the language in the control panel settings do not do.

  Hi teemacs,

  Looks like you made some good progress until now! This scanning guide, a Communication or connection error displayed when scanning may be useful.

  I hope this works!

  "Please click the Thumbs up icon below to thank me for having responded."

• I can't change the language interface of win vista

  I can't change the language interface of win vista

  Hello

  Browsing the forum here it looks like there are a few options, you can try:

  If the language bar is not listed in the menu toolbars, you do not have many input languages installed on your computer. You must add other languages using region and language in Control Panel. For more information, see Add or change an input language

  This is an additional option of "Old GrayGary" with the link here:

  http://www.techsupportforum.com/members/113412.html

  Quick-Fix:

  Do you have a language icon in your system tray? (If you switch between two choices of language installed / entry screen, the current selection must display in the system tray: for example IN English, JP for Japanese, etc.). Make sure that you have not chosen to "Hide inactive icons" in your bar spots Vista 'Properties' - or the icon can not be displayed. If you see such an icon, you should be able to right click on this icon and choose 'Restore the language bar' in the option dialog box.

  Quick-Fix #2:

  Since the language bar is a system setting, and the problem is recent, you might be able to recover your old settings using Vista System Restore utility - using a restore point out just before the language bar disappeared. You would probably go to Windows Update to reinstall all critical patches that have arrived since the time that the restore point was created originally.

  _______________

  Must neither of these approaches works, try to visit the region and Language Options in the Vista Control Panel.

  Control Panel

  Clock, language and region

  Regional and Language Options

  If you use different languages with your devices, you visit the "Keyboards and languages" tab and select "Change keyboard" - in the "text Services" and input languages window, the middle tab is "Language bar" - I think that the option to show or hide the taskbar is available here. If you use different languages for display only, you can go directly to the option "Change display language" from the regional and Language Options (and try the "Language bar" tab there).

  General language of bar News:

  The language bar (overview)
  http://Windows.Microsoft.com/en-us/Windows7/the-language-bar-overview

  Hope this helps,

  Steve <> Microsoft Partner