change the language of the inside of my application

Similar Questions

• I changed the name of my application under "Demand accounts" and all my analytical data disappeared. How can I fix it?

  I changed the name of my application under "Demand accounts" and all my analytical data disappeared. How can I fix it?

  When you change the name you actually have dissociated the report of your application. Our tech support should be able to resolve this issue, if you give them a call.

• What should I do to change the URL of our application?

  I need to change the URL to access my dev/TST environments to:
  http://xxxxxxx.XXXXXXX.com:8095
  TO
  http://YYYYYYYY.YYYYYY.com:8095
  
  installation of env: on PTools 8.47, Weblogic 8.1
  
  
  What should I do to change the URL of our application? What do I need to create a new PIA or redeploy the existing? pls advice.
  THX/t

  Change the useless URL of the changes much more that I said. Unless you put in place a few customizations.
  In addition, certain routes may have their own definition of the connector.

  Nicolas.

• Cannot change the inside of the shape?

  Someone another edition file

  They have a place with an oval in the Middle used as a clipping mask

  When I click on the object, I can only change the square outside, not the inside oval

  What kind of shape is the next, and if I can change the oval?
  

  Sorry, that I don't use much Illustrator

  Thank you
  Mathias

  
  
  

  It is an opacity mask. To change the 'hole', see the transparency Panel. See also the manual on opacity masks

• How to change the name of my application

  Hello

  Basically, I started my application as HelloWorld. Using eclipse.

  But since then Ive has obviously changed the name of it and edited blackberry_app_descriptor.xml to change the title.

  What I don't understand is why when I connect it, it refers to it as HelloWorld. And when he needs permission to run, it says HelloWorld application approval. And the sons are named HelloWorld!

  The record of deliverables is full file HelloWorld. And Ive known these but they rename back, so I guess, this is my code generation before his transport throughout. It is not Helloworld.cod but MyAppName.cod!

  Can someone tell me how to rename my App fully. What bit I have to change?

  in the descriptor of the application, go to the tab generate and verify the name of the module.
  Also rename the eclipse project.

  This should help, if not, create a new project and copy your stuff (just like a last solution)

• Allow the user to change the items in web application that they have not submitted

  Is there a way to allow a user to change/remove the elements of web app that they have not submitted?

  I did more than 400 pieces for the user via a .csv spreadsheet. I want the user to be able to change or remove these via an editing page of web app, I'll set up, but because I downloaded the .csv file, apparently, that another user cannot do this.

  At present, the only way that I know that this is so by the user submitting each element individually.

  Anyone know of a way to attribute everything to this user as if what he presented to them? Perhaps via the .csv file?

  Yes. In admin, you can change each element of WebApp to be attributed to a customer with the "presented by" in the section 'other Options '.

  You can also import/export this value, but in the CSV file, it is labeled as 'EntityId' - and you must use the system ID/ID of the entity of the client here.

  Otherwise, to allow anyone (who is connected) to change any element of WebApp, you must change the setting in the configuration of this WebApp by checking the option "anyone can edit items.

• Is it possible to change the URL of an application?

  Hi all

  I was working with oracle apex and created some applications almost a year back, due to my graduate studies, there is a discrepancy with the tool... and finally I am.

  Plan to create an application that will be similar as a personal Web site. My question here is... If it is possible to change the URL and keep a single which includes my name too

  instead of having this great...

  http://Apex.Oracle.com/pls/Apex/f?p=10221:1:116416608594529

  I understand that the entire URL described page n ° no lettering and the session but ID its my doubt possible or not... If possible then how to proceed?

  Thank you

  with respect,

  Robette.

  Thanks for the reply of Tony!

  Exactly, you got my point... that's what mean...

  I want to create a personal web application in the oracle apex and be hosted in another site with a pretty URL (say xxxxx.com... If the URL includes a part of my name which is very appreciated) so that everyone can check out my page and if needs I can include this URL in my RESUME, but I understand that for my own use. Why I'm preferring apex Oracle, I just want to remind the old concepts and practical tip that is there.

  If this is not possible in Oracle apex. Could you please suggest an idea... ?

  Once again thanks for your reply very...

  Kind regards

  Robette.

• Change the name of an application made with DPS Professional Edition

  Hi all

  my client just to tell me that they change the name of their magazines 'Passion Hub' to 'Passionhub Megazine', this change doesn't have certain procedures or is just an upgrade in the AppStore with iTunes Connect?

  The application was published on the app store already and they do not want to lose the people who have already downloaded the app and fact sheets.

  I apologize for my bad English.

  Thanks in advance for your answer.

  Best regards.

  Michela

  I see that the name change has already taken place. He need only a case to submit a new version of iTunes Connect.

  As long as it uses the same ID App, then the client will not be affected.

• Creating cloud - BUG change the installation directory for applications

  I searched and could not find this similar post here

  http://forums.Adobe.com/message/5498967#5498967

  Who stated the issue I am experiencing.  In the program office cloud creative preferences, I changed the D drive installation directory because I have my main hard drive partitioned and programs would take too much space on C.  Whatever the change in preferences, applications were still installing on my C drive.  I tried to restart and reinstall and nothing seemed to work.

  Finally, I decided to reassign my D partition to C, I must still complete this because I'm waiting for all the data on D to be transferred to an external drive, so I can recombine it in C without losing any data (I don't know if this is necessary, I have not recombined partitions in the front operating system (, but just to be sure)

  IN ANY CASE

  As I am awaiting transfer (more 120gbs takes a while) I changed the installation directory in the preferences of creative cloud to C and went ahead and installed the program I wanted to before all this.  Guess what?  It is installed on my D drive!

  This isn't a serious bug for me, just incredibly boring and causing a lot of extra work on my part just to install the program I wanted to.  However for someone who requires a different install directory to and cannot reorganize their computer to take account of this bug, I could see that she is more serious.  If anyone else has had this problem and found a solution?  Thank you.

  Adobe PS rock you, I hope that your other programs CC feel not hurried to immediate as does your Installer

  Thanks for the update Julie.  It is information that you have been able to install applications for the location on the D: drive.  Shared resources and temporary installation files will continue to be on the C: drive.  Please maintain enough disk space on your drive to allow installation of the necessary updates.  In general, I'd recommend at least having double the amount of free space on your system drive, to the amount of physical RAM, you have installed on the computer.

  You can find the system requirements for Adobe applications, and an indication of the disk space required for installation, system required. Creative cloud.

• Change the currentState of main application of popup

  I searched for two days and don't not find the best way to do it.
  
  How can I change the value 'currentState' of my main application of a window called by this request?
  
  If all other details are required please let me know. But this is my main problem.
  
  Thank you
  Chris
  

  Have you tried that?

  mx.core.Application.application.currentState = "someOtherState";

• Mac: How do I change the default printer by application

  Hello

  I use a HP OfficeJet 8600 and impossible to find a way to set the default print by application options. When I use my Windows machine he remembers the print by application settings (for example, if I print from Word, it prints the ordinary quality, if I select print in Photoshop, print quality Photo paper).  On the Mac (OS 10.8.5, Macbook Pro) I can't find any way to do it. If I put a print job in Word and the last used printer setting (from Photoshop) is Photo paper, then Word prints using this and uses a lot of ink and is incredibly slow.  Any help?

  Thank you...

  Hello again @winm!

  Thanks for the reply!

  I understand that when Windows printing software in memory settings for Word and Photoshop.  On the side of the things Mac, you will need to make the preset and choose it every time.  You may just be better to choose a quick project for Word and photo paper for Photoshop as you say.  The software in the Mac won't remember automatically.

• dynamically change the targeted and untargeted application icons

  Hi all

  In JDE 4.7.0, can I dynamically change icon application targeted and untargeted.

  My application connects to a server once a week and draws new content and 2 new icons.

  Can I use the icons drawn recently to replace the existing icons.

  Thank you.

  My glance, you have codes is about right.  Note that you will need to provide the images you downloaded as Bitmaps.  There are a number of discussions on this Forum dealing with requirements to download the files and convert them to Bitmaps, so have a look round for help with that.

• change the database that an application seeking

  Hello
  I copied an apex site and want to use it as a site of dev, I made a copy of the current database and it made the dev database.
  
  What should I do in the apex dev site so that it points to the database of dev
  
  Thanks in advance

  Hello

  You must Access the application Express Administration Services (the URL that ends with .../apex_admin) to change workspaces APEX to the assginments schema. Once you log in for the administration services, go in Manage Workspaces-> manage workspaces to assignments of schema (in the Actions of the workspace section). You can get more information here.

  Kind regards

  Sergio

• Change the version of labview application

  Hello

  I'm about to upgrade to LabVIEW 8.5 to 2010.

  I wish I could go back to 8.5 or recovery in 2010 on request.

  Can you tell me is it an application to set the default version of labVIEW?

  Thank you

  Sean

  Hi SeanJ,

  the last open version writes a link to the registry. If you close all versions of labview and click twice on a vi, then it will open with the last used (open) version.

  Mike

• Cannot change the 'open with' default application in OS 10.7.4 Lion for CS applications

  When moving to a new version of an application, I would like to continue the default 'open with' on the previous version. It helps to smooth the transition.  I am currently working with CS5 and CS6 applications. Access the palette 'info' of a file (photoshop, illustrator in design,... until now...) and try to switch the default 'open with' to CS5, but it does not work. He continues by default to CS6. Suggestions please?

  If you open Bridge and click on Preferences/editing/files Healt, you can set the default value for what you want.