Change the memory allocated for the graphics?

Similar Questions

• Get the DLL string (memory allocated for DLL)

  Hi, I'm aware there are a lot of discussions around this topic, but there are a lot of variations and I've never used before LabVIEW, and I seem to have a hard time at a very basic level, so I hope someone can help me with the below simple specific test case to put me on the right track before I pull my hair remaining.

  I've created a DLL with a single function "GenerateGreeting". When it is called, it allocates enough memory for the string "Hello World!" \0"at the pGreeting of pointer, copy this string to the pointer and sets the GreetingLength parameter to the number of allocated bytes (in the DLL in the end, I want to use, there is a DLL function to free the memory allocated for this way).

  I created a header file to go with the DLL containing the following line.

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  I then imported the LabVIEW file using the import Shared Library Wizard. That created a "generate Greeting.vi' and everything seems somewhat sensitive for me (although this does not mean a lot right now). When I run the vi, the ' GreetingLength on ' display correctly '13', the length of the string, but "pGreeting out" shows only three or four characters (which vary in each race), place of the string that is expected of junk.

  The pGreeting parameter is set to the 'String' type, the string "String pointer C" format, size currently Minimum of 4095. I think the problem is that the DLL wants to allocate memory for pGreeting; the caller is supposed to pass a unallocated pointer and let the DLL allocates memory for the string the right amount, but LabVIEW expected the DLL to write in its buffer préallouée. How to with LabVIEW? Most of the functions in the DLL in the end, I want to use work this way, so I hope that's possible. Or I have to rewrite all my DLL functions to use buffers allocated by the appellant?

  The vi , header and the DLL are atteched, tips appreciated. Edit - cannot attach the dll or the headers.

  tony_si wrote:

  extern __declspec(dllimport) int __stdcall GenerateGreeting(char* &pGreeting, int &GreetingLength);
  

  Although char * & pGreeting is actually a thing of C++ (no C compiler I know would accept it) and this basically means that the char pointer is passed as a reference. So, technically, it's a double referenced pointer, however nothing in C++ Specifies that reference parameters should be implemented as a pointer at the hardware level. So free to decide to use some other possible MECHANISM that takes the target CPU architecture support a C compiler constructor. However, for the C++ compilers, I know it's really just syntactic sugar and is implemented internally as a pointer.

  LabVIEW has no type of data that allows to configure this directly. You will have to configure it as a whole size pointer passed as a pointer value and then use a call MoveBlock() or the support VI GetValuePtr() to copy the data on the pointer in a string of LabVIEW.

  AND: You need to know how the DLL allocates the pointer so that you can deallocate it correctly after each call to this function. Otherwise you probably create a leak memory, since you say that the first 4 bytes in the returned buffer always change, this feature seems to assign to each run of a new buffer that you want to deallocate correctly. Unless the DLL uses a Windows such as HeapAlloc() API function for this, it should also export a function according to deallocate the buffer. Functions like malloc() and free() from the C runtime cannot always be applied in the same version between the caller and callee, so that calling free() by calling on a buffer that has been allocated with malloc() in the DLL may not work on the same segment of memory and result in undefined behavior.

• Satellite L-30-after the update of the BIOS can't change the graphics memory value

  I updated the BIOS to version 2.10, and now in the BIOS I have not possibility change memory graph... How can I change the graphics memory now? (Don t have backup old BIOS).

  Satellite L-30-115 (SL30E), graphics: ATI Radeom Xpress 200 M

  Hello. If you have ATI x200m and you wish to increase the Vram 256 MB, install the XP software + driver and you will be able to change the Vram. This function is not supported in Vista and BIOS setting.

• Satellite L500-1GK - can I change the graphics card?

  HEY! I need help

  I'm a graphic designer and use Satellite L500-1GK. I found that the VGA is not good enough. The resolution is not really good enough for a designer

  Manufacturer of the graphics card: Intel®
  type: Mobile Intel® GMA 4500 M
  memory: available total graphics memory can be up to 1 340 MB with 3 GB of memory and 32-bit operating system system or 1 759 MB with a 64 - bit OS system memory and 4 GB
  memory type: shared

  Is that what I can do to get the best resolution? Whatever he rib that I am able to change the VGA? is there a solution with that can you help me?

  Hello

  Unfortunately it is not possible to change the graphics card. It s fixed/soldered on the motherboard and can't be exchanged. Sorry, but it is not possible to s.

  But if you only need a better resolution of the screen, you can connect an external monitor. Here, you can work with a higher resolution if your monitor supports it.

• Satellite P850 - how to change the graphics settings in the BIOS?

  Hello

  I have a laptop Toshiba Satellite P850 and recently met with a gambling problem which required me to change the graphics settings in my BIOS from 64 MB to 128 MB.

  I was able to access my BIOS on my windows 8.1 operating system but when I'm on my BIOS, I can't find where to access the chipsets and change the graphics settings. I looked at all long and hard day for a solution and haven't found one that relate to my BIOS (version 6.70). It would be very appreciated for any help you can offer.

  Data sheet:

  Processor: Intel Core i7
  OS: windows 8.1
  BIOS: 6.70

  Dan.

  Hello Dan

  As far as I know these parameters do not exist and if the laptop has shared memory it runs automatically.
  In the past, that Toshiba has never offered these options in the BIOS, and so far nothing has changed.

• Satellite L755D-11W: cannot change the graphics chip in the game settings

  Hello

  On my laptop Satellite-L755D-11W, in some games and applications does not change the graphics chip. Otherwise said, at the time to choose the right game, I want to put a high-performance and change AMD Radeon HD 6400 M-> AMD Radeon (TM) HD 6520 G, click Save... but the settings are not saved and the AMD Radeon (TM) HD 6520 G is not selected for the match (())

  This happens not always, but often in the games and 3DMark2011.
  Drivers for video cards are the last who are on the Toshiba Support site.
  Official website of the AMD driver only is not supported (())

  Please help with this problem!

  Hello

  L755D-11W uses the AMD Radeon HD 6470 M graphics chip.
  So what GPU belongs to the Radeon HD64xx series and I don t think you could choose a series superior GPU (AMD Radeon (TM) HD 6520 G) in the properties of the game if the GPU is not supported.

• SP A10 - using the BIOS to change the graphic settings

  Hi all

  How do you change the graphics settings on an A10 SP from 16 MB to 64 MB? I guess this is done in the Bios but I can't seem to enter the just did F2 key appear the boot options.

  Aid is graetly appreciated.

  Hello

  Please use the ESC key to enter the BIOS settings.
  You should see the option to increase the shared graphics memory.

• Satellite P100-400: is it possible to change the graphics card?

  Hello

  I would like to know if it is possible to change the graphics card? It's the nvidia Go 7900 Gs with 512 MB...
  Have the nvidia mxm?
  Thanks in advance and sorry for my bad English

  At first, I must say that your English is very good and understandable.
  Back to your question: update graphic card is not possible. The graphics card is part of the motherboard and cannot be exchanged separately.

  Please note that the portable is not so extensible as on desktop computers. The upgrade can be done with RAM or HARD drive very easy, but not with processor or graphics card.

• 8650w workstation: can I change the graphics card in a laptop

  Can I change the graphics card in a laptop

  The old graphics card

  Graphics NVIDIA Quadro 2000

  This new

  NVIDIA Quadro K2100M

  Note that a computer 8650w workstation?

  The system compatible operating with this card and do not cause problems

   

  Hello

  The list shows the supported cards:

  • AMD over-pants M5950 1 GB dedicated video memory GDDR5 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0)

  • AMD Eyefinity technology supports up to five independent displays (requires a discrete graphic configuration) when you use a HP Advanced Docking station.

  • NVIDIA Quadro 1000 M with 2 GB of video memory DDR3 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0 able) dedicated

  • NVIDIA Quadro 2000 M with 2 GB of video memory DDR3 (Microsoft DirectX 11 (Shader Model 5.0) and OpenGL 4.0 able) dedicated

• change the graphics card in my pc

  Hi guy,

  Can I change the graphics card for my Hp pavilion b100in?

  If Yes, then which is the best gpu under 6500 SR?

  Thanks in advance.

  Welcome to the forum.

  No, here's what the specs of the product say video card:

  • The graphics card is soldered on the motherboard

• How to change the graphics card on lenovo v560

  Help, please. How to change the graphics card on laptop Lenovo v560?

  Windows 7 Ultimate, the drivers are installed.

  Sorry for my English. I'm from the Ukraine.

  
  

• Envy 17: How to change the graphics unit after the fresh install of Win 7?

  How can I switch between the internal and the discrete graphics unit?

  I installed the drivers recommended from HP website, but I don't have the ability to switch.

  I recognized with dxdiag that the system uses Intel graphics unit only, but I want to use the AMD graphics unit.

  I can't install the CCC of AMD, because she claims that no device is available. So I checked in the Device Manager if the AMD GPU is recognized, and it is not! All the drivers are installed.

  The BIOS is limited and I am not able to change the graphic in the BIOS.

  So I need your help.

  Please give me a solution for this problem.

  Thanks in advance for your support!

  SysInfo:

  Model: HP Envy 17-3080ez (Switzerland)

  REF: A2Q30EA #UUZ

  OS: Windows 7 Ultimate x 64 (clean)

  Fixed a problem. Just reinstalled the whole packs AMD and did a restart. Then install the factory rider once more, and everything works fine!

• Satellite M70 395: is it possible to change the graphics card?

  Hi there is there a way to change the graphics card in this laptop, I know its integrated into the motherboard, but on the intel site it says this chipset supports pci express http://www.intel.com/products/chipsets/915gm/index.htm

  so I didn't know if I could add a pci card, thanks in advance I'am a noob so please go easy :)

  Hello

  No, it is not possible to change the graphics card. It s attached to the motherboard.
  Please don Office mix t with a laptop PC technology

• Is it possible to change the graphics card on my Satellite L40

  Is it possible to change the graphic card geforce 8600 on my Satellite L40.

  No, this is not possible because mobile GPU chips are not extensible.
  The chip is mounted and soldered on the motherboard.

  Good bye

• Satellite Pro M10 - possibility to change the graphics card?

  Hello

  is it possible to change the graphic card with a new generation? My only, a 32 MB GeForce4 420 Go makes problems on some games because the requirement is 64 MB minimum.

  If, in case of purchase (Germany) and which is compatible?

  Thank you!

  Andreas

  Hello

  Jasmine is quite right. The graphics card is fest mounted on the motherboard and cannot be changed.

  I'm sorry.
  Good bye

• Can I change the graphics card on my laptop HP DV6-6190US?

  I have a laptop DV6-6190US, running windows 7 64-bit, processor I7-2630. Can I change the graphics card or am I stuck with the accompanying (RADEON HD6770M)? I want to get a NVIDIA GEFORCE 300 with CUDA technology series.

  Hello

  Sorry to say, but it is not really practical change your video card - although it's called a 'map', it is actually physically soldered to the motherboard and therefore, is not an evolutionary element.

  Kind regards

  DP - K