change the SIM 3 g map

Similar Questions

• iPad 9.7 Pro - no menu item to change the Sim pin?

  I can't find a menu item to change the Sim Pin on my iPad Wifi 9.7 Pro and cell code running iOS 9.3.1.

  Any idea?

  Try to check this article. If this does not work, give me an answer on the forum and I'll help.

  Use a SIM PIN code for your iPhone or iPad - Apple Support

• BlackBerry Smartphones Can I change the SIM (same network)

  Hello

  I recorded my blackberry and it's all running, just to put a spoke in the wheels (so to speak)

  My ISP gave me much about Sim Cards I had previously used includes blackberry

  The case is absolutely great, but this means I have to change the sim card in my Blackberry Curve 9320

  Of course, you think why didn't they give me the same thing about the new SIM in the Blackberry at the moment

  It is a little too stretched to enter here

  I was wondering if this is going to be difficult to implement, or if in fact I'd be able to do

  I am far perfect when it comes to geek stuff, but I'm not totally incapable, given some indications

  So I guess I need to know if I can change the SIM... same network, different number and that it would be that I have to go throu all registration again

  Thanks in advance... any info appreciated

  Change of sim card is very easy, your carrier for most will help you to transfer your data from the old to the new SIM free sim.

• Why should I activate my iPhone whenever I change the SIM card?

  Is there a way to stop this requirement without disabling find my iPhone? I have several SIM cards that I use in the different counties and it is really annoying when my phone asking me to activate using my Apple ID and an internet connection whenever I change my sim card. Is there a way to stop it?

  Thank you

  This should not happen (AFAIK). I use several SIMs when they travel, and it never happened to me. What iOS you run and if it is always passed or there started recently?

• How can I change the SIM PIN in ios 10?

  I just changed phone provider, got the new sim card and can not find where to change.

  I checked on other sites, but it is not in the iOs 10 in the same place (the phone settings).

  can you gove me a helping hand is it? Thank you

  Hi Juliaseahero!

  I see that you are looking for the SIM PIN parameter, so that you can change.  I can understand wanting to find this setting, and I'm happy to help you.  The setting you are looking for can be found in settings > phone > SIM PIN.

  Thank you for using communities of Apple Support.

  See you soon!

• Change the attribute - Configuration Item mapping in task Scriptable

  Hello

  is it possible to change the mapping of attributes to the elements of configuration with a scriptable tasks?

  Or do I have to map all possible configuration to decide later that you use attributes?

  example:

  configuration 1:

  UC = 4

  memory = 8

  disk_size = 16

  configuration 2:

  UC = 2

  memory = 4

  disk_size = 8

  Is it possible to have only three attributes (processors, memory, disk_size) and configuration card 2 via the script task or 1 configuration?

  Or should I do 6 attributes (cpus1, cpus2, memory1, memory2, disk1, disk2) a static mapping and use three of the six possible attributes?

  Thank you

  Michael

  The way I saw this fact is as follows:

  Define a ConfigurationElement (called configElement in the example below) as an attribute to your workflow.

  Create items in the ConfigurationElement prefixed by your size or configuration. (Ex: small_cpu, large_cpu, small_memory, large_memory, etc.).

  In your task scriptable:

  var cpuAttr = configElement.getAttributeWithKey (size + "_cpu");

  var cpu = cpuAttr.value;

  var memoryAttr = configElement.getAttributeWithKey (size + "_memory");

  memory of var = memoryAttr.value;

• Change the DB_LOCATION to a mapping Table after you copy it

  Hello!
  
  Someone knows how to change the DB_LOCATION property for the table in a map after copying it to another module withhin the same project with OMB MORE.
  
  After copying the mapping of all the objects still points to the old items in the repository. But the objects now in the bad module. I have the same repository as objects in the new module, and I want to change the operator of mapping to point to the objects of the new module.
  In the mapping editor achieve you by combining the mapping object with the new object to another module. How can I do this with the OMB MORE?
  
  Thanks in advance
  Alexander
  
  Edited by: user13336549 the 14.09.2010 07:40

  Hi Alexandre

  After you copy a table in a different module, change the module to define the location of data, configure the module to set the location and synchronize the mapping to use this table.

  In OMB to synchronize incoming and outgoing use OMBSYNCHRONIZE command

  On arrival:
  TABLE OMBSYNCHRONIZE "$OMB_CURRENT_PROJECT/SALES/TÄBY" MAPPING "M_W_PARAMS" OPERATOR "TÄBY" USE ('REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME' RECONCILE_STRATEGY)

  Outbound:
  OMBSYNCHRONIZE MAPPING "M_W_PARAMS" OPERATOR "TABX" TO TABLE "$OMB_CURRENT_PROJECT/SALES/TABX ' USE ('REPLACE', MATCHING_STRATEGY 'MATCH_BY_OBJECT_NAME' RECONCILE_STRATEGY)

  See you soon
  David

• I have an Air iPad with wifi cell, however, suddenly my iPad did not have 4G service. I went to my carrier and they change the SIM of another, it still appears above in the screen no Service and I already tried the chip and work.

  I already tried the sim card in my mini iPad and works perfectly; my career was told to do a restore of my iPad Air, I did it like 3 times, and he always acknowledged carrier in settings, but still says no Service.

  I wanted to know what can I do about it.

  Thanks for the support.

  Settings - general - reset - Reset Network settings - you will have to re integrate WiFi passwords

• BlackBerry Q10 my settings change when I change the sim card?

  Hello

  I'm going to Croatia for a holiday. I would like to buy a prepaid sim card. Parameters of Blackberry changes or it would be the same when I change simicard?

  Hello and welcome to the community!

  Nothing should change when you do this. With devices inherited from BB, there could be some changes... but with BB10, nothing should change.

  Good luck!

• Change the default value for mapping settings?

  Hello world
  
  I have a question belonging to the configuration of mappings in OWB.
  
  When I create a map and place (for example) a scoreboard operator, in the mapping language ist configuration is automatically set to "PL/SQL" and there are also parameters of execution as "maximum number of errors. By default, the value for this setting is 50.
  
  Is it possible to change this default value to 0? So that each new PL/SQL-mapping I have create a a "maximum number of errors = 0".
  
  Thank you
  Stefan

  Hello

  For now, the only options are as suggests really, apart from the repository of piracy. In version 11 GR 2, there is a new object to do precisely this kind of things, you can create a configuration template. The model can set the values you want as default values.

  See you soon
  David

• Just upgraded my iOS 9.3.1 ipad2 and my cell phone has been disabled. ATT has checked the settings and changed the SIM cards. This can be corrected?

  Just updated to iOS 9.3.1 on my ipad2. My cell phone has been disabled. This can be corrected?

  I have the same problem

• How to simulate the change of sim card

  Hi friends

  I want to simulate the functionality of changing the sim. If I'm erasing all data on mobile, then I lost all data. Is there a solution to implement the scenario of change of sim card.

  You can simulate the change of SIM card on Simulator-

  Steps for BB JDE-

  
  

  1.) go to the Menu bar - > edit-> preferences

  The Simulator 2 tab.) -> Network tab->

  # ICCID (GPRS) / ICCID override (GPRS)
  

  # IMSI (GPRS) / IMSI override (GPRS).

  Enter here any value in the format - www.xxx.yyyy.zzzz (e.g. 5600.5478.02145.121)

  3.) click apply. Close.

  4.) now when you run the Simulator, it generates a warning.

  Given IMSI (5600.5478.02145.121) is longer than the maximum length (15).

            Click on continue.

  Steps for Eclipse-

  1.) select your project in the Package Explorer-> right click-> Debug as ->Debug Configurations ->

  2.) select DebugServer from the left pane of the window.

  (3.) the right side of the pane, there are four tabs-> go to the Simulator.

  4.) be that cannot change default Simulator, if we are to make a new profile.

  5.) don't forget the new profile is selected. Now, select network tab.

  6.) steps 2, 3 & 4 above.

  
  

  Now, it will give u a simulation of change of default SIM card IMSI value is 666666.01.234567.8

  Thank you

  Kanak Sony
  

• change the password on the drives mapped without munmap

  Is there a way to * easially * change the passowrd of drive mapped in W7 * WITHOUT * remap, then remapping?

  I can't copy and past current mapped drive name and my TI group did a great job of making the server names, so try loooooooong that it is impossible to get the first 5!  And they make me change my 15-digit password every 30 days.

  Hi,

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

• My I phone 4 16GB when I put the SIM no card no service

  Hello

  I phone I 4. 16 GB serial number is QR * A4S when I put my sim card does not work I have change the SIM several times the same problem

  < personal information under the direction of the host >

  Looks like the iPhone is locked to a specific carrier.

  Where you bought the iPhone from?

• failure of the SIM, why I this message all the time?

  failure of the SIM, why I this message all the time?

  This means that your SIM card is defective or otherwise expired

  Can you make and receive calls and texts?

  If so - go out the SIM card - wait about 45 seconds and re insert it back

  If not - contact your carrier for a new SIM card

  Remove or change the SIM card in your iPhone or iPad - Apple Support