Change the title of the screen or the read attribute in question_screen.vm

Similar Questions

• How to change the read-only, write protect status of files?

  Original title: change the State of the files.

  I have problems deleting files.  I need to know how to change the status of the files: e.g. "read-only, write protect, etc."

  Hi fbanks4,

  1. were you able to remove the files before?

  You can read the following article and try the steps to change the status of the read-only files:

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Cannot change the reading file attributes only in Windows XP

  When I view the folder properties, they all show the 'read only' as selected.  The selection is a greyed out tick.  When I uncheck this, change seems to be accepted but is not change.  View the properties immediately after that do change the same greyed tick is still there.  All other problems with it seem when a transfer of the user it XP files to a new Vista system.  This isn't the case here, because the files are all over my existing XP system.  How can I continuous change the folder attributes to have the 'read only' deselected.

  Hi BarryGray,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/cant-change-read-only-properties-of-files-in-XP/ef76dfee-0bf0-4D8D-8c12-acefe95ad38d

  I hope this helps!

• How to change the default attributes for an index for a subpartition without data in it

  Hello

  The use of oracle 11.2.0.3 attributes and modifydefault for a partition, for example the tablespace can but can not use the same syntax for a subpartition.

  Is it possible to change the default attributes for a subpartition?

  ALTER index RTRN_CUR_CONV_IDX change the default attributes for the subpartition SYS_SUBP64934 RTRN_PART_201505 tablespace

  Thank you

  Refer to the section of the doc "a Subpartition template editing.

  http://docs.Oracle.com/CD/B28359_01/server.111/b32024/part_admin.htm#i1007904

  A Subpartition template editing

  You can change a model of a composite partitioned table subpartition by replacing it with a new model of subpartition. All subsequent operations that use the subpartition template (such as ADD PARTITION or MERGE PARTITIONS ) will now use the new subpartition template. Existing subpartitions remain unchanged.

  If you change a subpartition of a range model * composite partitioned table, then of range partitions that have not yet been created will use the new subpartition template.

  Use of the ALTER TABLE ... SET SUBPARTITION TEMPLATE statement to specify a new subpartition template. For example:

  You will need to 'fix' the new model as in the doc example.

  By the example of partitions with just a line in them, we find the secondary partition with data correctly a tablespace name as expecetd, but 4 other secondary partitions always show the name of the default tablespace in user_ind_subpartitions.

  Any idea whay and if can change

  Change the template affects only the created NEW partitions/subpartitions. If you want existing subpartitions to a different tablespace, you will need to move it.

• Data is erased after changing the CustomTopMember attribute for accounts

  Hi all

  We changed the Custom3TopMember attribute for some basic accounts and deployed the HFM application. After deployment, the existing data are get deleted for these accounts.

  Please help me understand the reason and the solution to keep data.

  Thank you

  Alex Ditya

  Hello

  He is expected to not be able to see the values if you change the Custom3TopMember.

  I suggest to undo the change, check if the data is still there, extract the data, change the data in order to include the new analysis and then reload the data.

  Kind regards

  Thanos

• After installation of creative suite, all the desktop icons change the reader. Thank you

  After installation of creative suite, all the desktop icons change the reader. Double-click the icons, launch reader.

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

• Change the value attribute for the order of the sequences

  Dear Java expert.

  I've been trying to script. Find/replace the value attribute (id) for the order of the sequences (screenshot attached for your reference). It is fair to the script?

  Example:

  ID = change of table8_3 ID = table8_1

  ID = change of table8_3 ID = table8_2

  ID = change of table8_3 ID = table8_3

  

  Please suggest friends.

  Thank you in advance,

  Hello

  Something like that...

  var doc = app.activeDocument;
  var _XML = doc.xmlElements[0];
  var _XMLelements = _XML.evaluateXPathExpression("//*/table[@id='table8_3']")
  
  for(var i=0;i<_XMLelements.length;i++){
      _XMLelements[i].xmlAttributes.item("id").value= 'table8_' + (i+1);
  }
  

  Concerning

• How can we change the text attributes in a PHP Gallery?

  Hi everyone, I'm changing the attributes of text on this PHP Gallery and he leads me into the wall! Someone knows who to do?

  http://www.gwilliams-designs.co.UK/AdobeSupport/gallery_test4.php

  I am trying to create the following styles. Thanks a lot for your help.

  Top text

  Georgia, Times New Roman, Times, serif

  size 18

  "BOLD"

  Lower text

  Georgia, Times New Roman, Times, serif

  size 13

  regular

  I won't get into that because once you the top line a link it will ignore everything you've done and follow the default style for the links (blue and purple).

  You need link Pseudo-classes to style the links as you like.

  Here is the Protocol, change as you wish, but they must remain in this order.

  / * link not visited * /.

  a: link {}

  Color: #FF0000;

  }

  / * visited links * /.

  a: visited {}

  Color: #00FF00;

  }

  / * mouse over link * /.

  a: hover {}

  color: #FF00FF;

  }

  / * selected link * /.

  a: active {}

  Color: #0000FF;

  }

• How to change the connection attribute in ODSEE?

  Hello
  Can someone help me how to change the default login of ODSEE attribute? By default, cn is used as username to sign in on ODSEE but I want to change it to the new attribute for example uid. All relevant information not found online? Anyone has an idea about this?
  
  Thanks in advance.
  
  Thank you
  Olga

  It isn't really a "connection attribute" for LDAP.

  As mentioned above, how you "login" really depends on the application.

  "Connect" (BIND) in the most common way, you send a LINK demand, and the DN of the user input and the password of the user.
  The LDAP server locates the input from the user through the DN, then encrypts the password provided and compares the encrypted value to the one stored in the user input.
  If they match, the CONNECTION succeeds, and this particular TCP connection is "connected".

  Where things differ between applications is in the way they get the DN of the user.

  No request (AFAIK) only requires the user to type in its DN.
  The user will enter his login name. This name will be stored as an attribute in user input. The only real constraint on the attribute is that he must have a syntax that allows human readable characters as the value (the login name) and there must be a method to ensure that the value is unique in all instances of the attribute (not 100% true, but suggests so for our purposes here).

  So we have a name - say "Fred".
  Using this name, that we must find the one and only entries that has the attribute that we will use (say cn) to contain the user name.

  There are basically two ways to do it.

  The most traditional method assumes that all user entries are stored under a specific node - lets say "or is people, dc is company, dc = com"
  so that the user DNs use CN as the RDN, would be Dn of Fred: cn = Fred, or = people, dc = company, dc = com.

  Simplistic applications will simply have a dn, something like skeleton: cn =, ou = people, dc = company, dc = com

  They will take the name of the user supplies and replace with this name, then use pray DN deadlocked.
  The problem is that this is not always the case that user input is stored together like that and some really pathetic apps will be "cn =" party hard coded so your user was worth better have a DN beginning with cn = and not uid =.

  Modern applications most often perform a search to locate the unique name. The research will use a filter something like (uid = fred) fo find the DN of the entry where the UID attribute has the value "fred". This unique name is then used in the BIND request.

  This second method is much more flexible, especially if the application allows you to specify your own search and does not assume its always going to start with "uid ="... Unfortunately, many applications still do.

  The only downside to this second method (apart from a little bit more work for the application developer) is that the application requires permissions to perform its search, the attribute he seeks REALLY needs to have an index of equality and, of course, overhead of a supplementary search for each user authentication.

  So - as noted above, you can use any attribute you want, but do depend on so your application is able to use.

• How can I change the bold attribute police breadcrumb?

  Hello - I need to change the font on all the entries in the navigation bar (current or not) to "BOLD". I tried the folliowing in the model
  (for now, just at the entrance to breadcrumb to current page), but it does nothing. I added the:
  < style type = "text/css" > make-weight: bold < / style >
  
  < class li = "t15Current" > < span > #NAME # </span > < style type = "text/css" > font: "BOLD" < / style > < /li >
  
  It appears in the source of the page, no error is generated. I also tried in the < span > tags.
  
  I know it must be an easy fix!
  
  Thank you
  Carol

  It should look like this (based on my model of breadcrumb theme 20):

  #NAME#
  

• I can't change the read only files on my NAS unit.

  I have a promise SmartStore MS4300n Network Attached Storage system that I have used for more than two years. I can access it from my Windows Xp and my 64 bit Windows 7 computer. Yesterday, I tried to move some files from my Win 7 to the NAS and I find that I can't copy on it. I can move my Win 7 7 NAS files. When I look at the properties of the files on the NAS, they all are now READ ONLY. When I try to change it tells me I don't have permission. I am the only user and I am logged in as admin. Yet once it has started here yesterday.
  If I access the NAS since my XP I can copy data to the NAS even if properties files are READ only.

  The problem is clearly with WINDOWS 7, how to fix it, it work well before and I need to use this device to check my belongings.

  Thank you
  Dennis

  OK, looks like I fixed it. I found that even though I have my computer set up to run all updates automatically I checked windows update and found five that had not been installed. After that I ran the update now can I copy files to my SIN again.

• I use Outlook Express messaging in Windows XP. How can I change the "READING" of West Euro (ISO) (Windows)? (ISO is default, NO selecttion option)

  I use Outlook Express messaging in Windows XP. Display Hebrew characters of the name of the sender and the subject? and the body of the message often appears in giberish (I guess it's ASCII). My ' READ' international property is Euro (ISO), West it is grayed and I have no option to Western Euro (Windows), (no drop-down option). My "send " is OK, I had a choice, and it's on (windows).

  [Transferred from Internet Explorer]

  Hello

  You can see these articles:

  http://www.pinyinjoe.com/FAQ/Outlook-Chinese-display.htm

  http://www.pinyinjoe.com/pinyin/ea_setup.htm

  http://www.pinyinjoe.com/FAQ/change-language-for-non-Unicode-programs.htm

• Cannot change the reading list in Safari 10

  9 safari, when you had finished with an article on your watchlist, you can click on a small 'X' in the top right of the item to remove. In Safari 10, that 'X' has been removed.

  Nice one Apple!

  Seriously, does anyone know how to delete items in the playlist?

  Thank you in anticipation

  Right-click on an item, and then select "Delete Item." Not ideal option, but only to remove items at this time.

• change the attributes of text on working capital in muse

  Hello!

  I'll build a Web site with muse and I need to change the text attributes when I turning on the text.

  However, when I try to do this with the States Panel, it is said "beaches of text cannot be edited or formatted by the State."

  For example, I want to change the text color to red when I hover over a menu item in my navigation bar.

  or change the color of the text when I hover over the title of the tabbed panels widget.

  Thanks in advance

  -Connor

  I'll answer my own question, hope this helps someone.

  To change the text attributes such as size, color, weight or same font family, rollover, mousedown, etc. active:

  I thought that I should click until I could change the text (the normal way to change fonts, etc.)

  but for this change by the State, simply select what you want to change (click the box, do not click until it appears the text tool) then click on the 'States' tab, choose the State to change (rollover, active, normal, etc.) then click on the button next to "Text" attribute (menu, top-right in Muse cc 2014) and then change the color , weight, etc.

  This will change it for this State!

  Sorry if that was confusing. but I thought id answer my questions for me

• IOM - change the adapter settings

  People,
  
  I use the conector 9.1.1.4 Exchange and it works very well! But when I put in service of a user mailbox, the fields of the user of the IOM (Organization and user Type) are mapped to the target AD (Department and title). I saw the adapter 'MEXC set user properties' and it's mapping this field but I can't remove it.
  
  have you ever arrived them?
  
  Thank you!
  
  
  / Fanton

  I solved this problem.
  I changed the adapter attribute values. I replaced the title or the Department with a literal value (space). It works!

  Best regards!

  / Fanton