change the user LDAP filter

Similar Questions

• How to change the user name - peer-to-peer network

  I recently installed shareaza, is a peer-to-peer network as you know. the problem is that all of my folders have my name on it: that is to say, he will say sharedfiles/Jose/my documents. I tried to change my username on useraccount, but the name of Jose remains on everything. is there anyway I can change this? Thanks for any help

  Hello

  The fact is that the username will be created at the beginning of the installation of the OS.
  It comes to you account on the laptop.
  Each user account includes the folder my documents.
  In this case, you cannot change the user account if you have a single user profile on the laptop. The title of the user accounts, you can create additional user with different names.

  The other possibility would be to change the download source. But that you change somewhere in the program settings. Unfortunately, this program is unclear to me. In this case, I can give t you information where you will find this option.

• I have a problem with the connection to the computer after you change the user name.

  Original title: HELP

  I changed the username on my laptop and it is not letting me log

  I changed the username on my laptop and it is not letting me log

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point before you have changed the user name.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key. This will save you a lot of trouble.

• Smartphones blackBerry how to change the user name of e-mail on a Blackberry Curve 9320.

  Dear community,

  I have a Blackberry Curve 9320. My company has recently changed their messaging system so I need to create a new e-mail account. Creating the account of electronic mail is not a problem. However. some settings need to be changed. When I go on settings, navigation key allows me to change the change the server info, type my password etc. However, I'm unable to change the user name. My device automatically generates a username of email that is not correct and I am unable to change because the navigation button jumps on this area. Can someone advise me on how a change the username of email on a curve 9320. Thank you.

  IT WORKED! Thank you very much. Force the unit to offer "I'll give you the parameters" was the thing. Have a great day.

• Change the user agent of the browser

  Hi all

  I am working on an app for Blackberry 6 and 7 using Webworks. I was wondering if it is possible to change the user agent of the browser.

  What I would do is, add a string to the end. For example:

  Default: ' Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/33.0.1750.149.

  Mine: "Mozilla/5.0 (BB7) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 CustomText, Chrome/33.0.1750.149.

  Thanks in advance!

  The config.xml file, you can declare rim: userAgent value

  https://developer.BlackBerry.com/HTML5/documentation/v1_0/widget_element_834671_11.html

• How can I change the user of "My Documents" by default? »

  I'm changing the user to 'My Documents' which has initially set up a laptop from the MFG.  while I can use it to another employee. I changed the name of the computer, but how do I change the user of "My Documents" by default? »

  Hi W30330,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/deleting-old-user-accounts-and/08419300-ef7c-42e5-9027-f123128ebcf8

  I hope this helps!

• How can I change the user backup POS?

  Hi guys,.

  Wondering if or how I can change the user to backup of POS on my POS device. Is it possible to change the user after the installation is complete?

  Or I need to reinstall POS to do properly?

  thx for the advice

  Flo

  You can change the user in https://ip-adress/vdp-configure under Configuration.

  'Klick to change the configuration of vCenter' enter the PW the POS and you can change the user name of vCenter.

  A reboot is required after the change, and an integrity check will be performed during the restart.

  If the change will take some time...

  Paul

• Changing the user collection

  I need to limit the number of virtual machines that Ops Mgr is looking for licensing reasons.  I have my user configuration and permissions, but how do I change the user in the collection?  I left empty during the initial installation, so he has rights to look at everything right now.

  Thanks in advance,

  Aaron

  Hi Aaron,

  One of the selections for the vCenter in the Admin UI is "update" - allowing you to add your user to the collection.

• Change the user name in Smart View 11.1.2.1

  Hello
  
  Is it possible to force a change of username in Smart View 11?
  
  Once the user is connected to they need to restart the copmputer to change the user name.

  I thought of making a right click on the HFM application and clicking on logout would work, but it didn't. Instead, you must click on disconnect all. You can find it in the Smart Panel View, by clicking on the little black arrow next to the Home icon.

  Let me know if you still see issues.

  See you soon,.
  Mehmet

• How can I change the user name and password

  I successfully download the FVO and install the virtual appliance. It works very well with my blackberry. I can connect to individual servers or virtual Center.

  However I don't know how to change the user name and password.

  I would also like to know how it works?

  We have a BES server on our network and no configuration is necessary. I just turned on the device Mobile Access of vCenter and entered the ip address of my virtual Center and bingo, I can access through my blackberry.

  If you try to change the Appliance virtual username and password, you can use the standard linux commands (adduser, passwd, chgrp, chown, etc.,)

  The default user name and password so that the robot is root/vmware"."

• What does "change the user myuser account unlock" do?

  What is the statement "change the user myuser account unlock" do? I'm looking at a few examples to use the oracle data pump. He asks me to unlock the account.
  
  TIA
  Ravi

  You can not access a locked account. You can connect to an unlocked account (open).
  ALTER USER myuser ACCOUNT UNLOCKING unlocks the account if you can connect using it.

• change the user of the BONE

  Hai all,
  
  Plan to change the OS user for oracle database applications...
  
  
  The database is currently owned by oratoure, I intend to change as follows:
  
  
  (A) create a new user, oramoure
  (b) assign the Group dba
  (c) change of complete ownership of the directory to oramour (where oracle apps_st and tech_st) is
  (d) attach the file of the environment to the bash profile...
  (e) provide access to oramoure to/tmp and/var/opt/ora *.
  
  
  nothing else to do?
  
  
  
  Kai
  
  Published by: KaiS on October 18, 2008 22:53

  Kai,

  Please refer to the following note and follow the steps in the evolution of the property of the database files (skip the steps of cloning):

  Note: 558478.1 - cloning of a house database and change the user/group that owns
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=558478.1

• How to allow the user to filter the report data?

  I read a lot of entries on this topic related to interactive reports. From what I can tell, the version we are on... 3.0.1.00.08, does not have the 'classic' vs 'interactive '. So, can someone recommend the best way for me to allow the user to filter report results? Specifically, the user wants to be able to see only active records, but I also want that they want to see all documents (active and inactive).
  
  Thank you
  Kristina

  Kristina,

  You can add a list "select" to your page. Calling it something like P1_LIST and add it to your where clause as...

  select
  col1,
  col2,
  col3
  from table
  where col2 = decode (:P1_LIST, '-1', col2, :P1_LIST)
  

  You can set the LOV to auto-submit or have a 'Send' button so that your report is filtered according to the value of P1_LIST.

  Also, in the properties of your selection list, set the 'Null view' to 'Yes', 'Display Null value' to something like 'ALL' (or whatever text you want) and the "Null return value'-1 (or whatever value you have in decoding).

  I hope this helps.

  -Chris

• Schedule 7 - How can I change the proxy ldap user?

  Hello

  Because we have to replace our old Calendar Server, I have prepared a new server virtual calendar (vcalendar7).
  As we already have a Calendar Server virtual used to test new versions of calendar7 (precalendar7), I created a clone
  of it, changed its name, the network settings... and I run init-config.

  It seems to work, but when I listed config I see no new proxy user who binds the directory server
  has been created. The user is the user created on the test server.

  I would like one for the new server.
  How can I force the creation during the init-config process?

  I tried to change the value of the base.ldapinfo.ugldap.binddn:

  davadmin config change o base.ldapinfo.ugldap.binddn - v "cal-admin - vcalendar7.mydomain.com - 20140419144243Z,...» »

  After a reboot I run init-config

  No ldap changes has been generated...

  at the end of the initial value reappears: cal-admin - precalendar7.mydomain.com - 20121219144243Z...

  Can you help me?

  Hello

  Check the file /opt/sun/comms/davserver/lib/config-templates/DavserverCfg.properties for the cal.enduser.admin.userid of entry. It can still have the old value.

  Either change the file to get the correct value or rename/detected file and then restart init-config.

  -Deb

• How to impose the task dynamically to the user LDAP?

  I need to entrust the task to the user based on their number that ends with the xml request. I want to know, how we can configure the human task, i.e. the mission assigned to the user based on the employe_id of the LDAP?
  
  Published by: 949691 on August 29, 2012 14:49

  Looks like you pass the variable with the user id iinto human task of Interactive activity and one of the elements is the LDAP id.

  Open the human task, click on the assignment tab-> double-click the icon of the performer in the Center-> change the dropdown to "Build a list of participants to help" for "names and Expressions"-> click the 'more'-> click 'Add a user'-> change 'Data Type' drop-down list selection to "by the Expression"-> click on the button «...» "in virtue of the 'value'-> expand the 'task'-> expand" task: payload "-> select the variable that you set the user id.

  Dan